Anyone noticed issues with connecting with existing devices after the latest update? I have removed and work very hard at re-pairing my devices but they all take alot of attempts and connecting take alot of tries as well. It's usually takes a reboot to even re-connect. Turning off and on Bluetooth does not seem to work. Anyone have a fix or idea?
Sent from my SM-T230NU using Tapatalk
Sadly the same for me. When I get a call it sometimes automatically connects during the call, but not very willingly. Have not found a fix, but see a lot of people reporting the same issue.
Verstuurd vanaf mijn A0001 met Tapatalk
Same here with MiBand. Also it seems that BLE isn't working. The Bluetooth notification icon stays white all the time. Before it used to be greyed out and becoming white only when transferring data.
I get connecting and after 30 secs connects and disconnects.
Sent from my SM-T230NU using Tapatalk
Bluetooth works correctly after doing a clean install, meaning wipe everything but internal storage. A dirty install is a update install. However Bluetooth works with many many issues for a dirty install. Hope that helps anyone after doing the update. Remember backup every thing before doing a clean install.
Sent from my SM-T230NU using Tapatalk
I found that after a day or 2 after doing a clean install you will still find yourself still trying to reconnect your Bluetooth devices. They work but you must go into settings umnderr Bluetooth and keep trying to reconnect to your devices.
Sent from my SM-T230NU using Tapatalk
Hi guys, the same is happening with my car head unit... It's almost impossible to reconnect unless removing it from the paired devices list.
I restored the previous update and everything work great. It connect quickly and stable.
I'll stay on 213 untill a solution or this BT issue get solved.
I did a clean install. All devices are connecting with no problems, but BLE is still not working.
Related
Hi guys.
I'm using a stock non-rooted Sensation on ICS. For the past couple of months or so, the bluetooth part of the phone has been crashing - even when I'm not using bt to connect to anything.
Even if I turn off the phone (and remove the battery) and reboot the phone, bluetooth SOMETIMES loads and sometimes doesn't. It'll take maybe 3-4 reboots before the icon reappears at the top and even then, it crashes after a few minutes.
Is there anyway of force-starting or restarting bluetooth rather than rebooting the phone, or maybe 'resetting' bluetooth so I can re-pair all my devices?
Thanks
Steve
Hi,
I've got yesterday sw2. It is really cool, but sometimes i have problem with bluetooth. Sw2 seems to be connected with phone, but when i start some app, it is loading, but this app don't start. I must restart my watch and then everything works fine, but then when i don't use it for a while it didn't want start against. I am using nexus 5 with custom rom. Where can be a problem?
I am having the same problem. Also a nexus 5 with custom rom. Maybe this is a nexus issue?
Which kernel are you running on the phone.
I am using latest Droidkang rom with stock cm kernel.
Some times I will clear phone's RAM to temporarily resolve this problem.
Any ideas anyone? I have the same problem on stock 4.3 on HTC One Max. It drives me nuts ^^
Stock Nexus 5 has no such issue so I'd start with the kernel /ROM bluetooth compatability. Certain apps seem to lose their state occasionally I've noticed. They generally just need to be closed and reopened though. No reboot has been necessary.
Sent via telepathy
Difficulty with MediaTek devices
I have a Wiko Stairway, which is built on MediaTek platform. Pairing is difficult but possible. I don't know whose fault it is, MediaTek or Sony or both?
Still I find it awkard that I have to install 10MB of Sony software just to establish a faulty connection.
My workaround:
Pair the devices without installing the Smart Connect suite
Install Smart Connect and restart watch
Start Smart Connect and wait a while. It should now find the watch and prompt for installing the add-on
Turn bluetooth off and on on both devices
It should now work
Problem is that every now and then the connection is dropped and you may have to toggle bluetooth on either watch or phone or both. Even sometimes a restart is required.
A work around might be to see if force closing the app 'bluetooth share' temporary resolves the issue. If that's the case you could set up a tasker task to kill bluetooth share every 8 hours or so. You might need a plug-in to properly kill bluetooth share with tasker.
Hi all,
I'm growing increasingly frustrated with this watch because of connection issues.
When I received this watch in January, I was able to set it up no problem. Everything worked great. I just had two issues-
1. The Bluetooth car system would no longer work because the phone would use the watch as the default headset.
2. Google duo would go bonkers when I was getting a call if the watch was connected.
Both of these issues were solved with a solution found here in the forums-by unchecking the option to use the watch for phone connection.
I noticed immediately after doing that that the connection became unstable. I would disconnect randomly then reconnect. As the weeks went on the disconnections became more frequent i.e. Every 2-3 minutes. Then the watch wouldn't connect anymore. Once the watch wouldn't connect anymore neither would my car. Nothing related to Bluetooth would work on my phone. My Tiles wouldn't connect anymore either.
So I went through and deleted all data and cache related to the three Samsung apps and uninstalled the apps. I deleted all Bluetooth connections. Then reinstalled the apps and connected the watch. Within an hour I was still in the same situation. (With no other things connected to Bluetooth.)
I figured out that if I restart my phone everything works again for about 20-30 minutes.
I'm at the point where I don't feel like it is worth keeping anymore. I can't have anything else connected to Bluetooth and I have to restart the phone so often that it just doesn't make sense.
After reading through the forums here it doesn't sound like this is a common problem. Is there something I am missing? Is the watch defective? Any suggestions is greatly appreciated.
Thank you.
You could well find the issue is with your phone and not the watch. I initially used my S3 with a Samsung phone that went bust. I went back to my Nexus 5 and found I had some issues and one app had disappeared from the app store. I contacted the app firm who told me that they were aware of it but it was Samsung that was blocking the app. On going back to a Samsung phone the app was available again and works fine. Can you check your S3 with a different phone?
I also have a S3 and a 6P. Disconnect the S3 Bluetooth from your phone Bluetooth settings and it should connect to your car. You should still see the "Gear S Plugin" notification if you swipe down on the the phone. You should still receive notifications on your phone but the Bluetooth will connect to your car. Connect the S3 to your phones Bluetooth again if you want to answer calls via your watch. Hope this helps.
I have the Mate 9 and the Frontier... when i enter my truck i just press airplan mode on the watch turning off all connection. bluetooth from phone to truck connects 1-2-3....
Clarification
Hi all,
Thanks for the responses. Probably because of my long rambling post there is a little misunderstanding of where I'm at now.
Right now my problem is that my phone can't stay connected to my watch. I have nothing else connected via Bluetooth to my phone. Once it can't connect anymore, I have to restart my phone in order for it to connect again. And then it only stay connected for a couple of minutes before disconnecting.
It is like the Bluetooth gets locked up on my phone by the Samsung gear apps.
Maybe it's my phone. Maybe time to get a Pixel.
Any suggestions are greatly appreciated.
Try this. I do it when I lose notifications. Go to Bluetooth on your phone. "forget your watch" it will disconnect. Reboot phone. Then re pair watch and phone after reboot using your phone and the watch (not the gear app). That usually fixes most problems for me.
Sent from my ONEPLUS A3000 using Tapatalk
I'm not sure what exactly happened but I've been pairing with my old Nexus through bluetooth for a while now with no problems, and suddenly I stopped being able to connect to it or any other device. I can turn on bluetooth, see devices, and even pair but when I press on a device name to connect it says "connected" for about half a second and then disconnects immediately. Thought it was the Nexus but I am unable to connect to any other devices.
I tried rebooting, un-pair and re-pair, clearing bluetooth cache/data, clearing dalvik, but nothing.
The weird thing is that this actually happened a while back, and when I turned off developer mode it started working again. But now that's not doing anything.
I saw that there are a few old threads about others with bluetooth problems. Has there been a fix for this?
I'm running RR on 6.0.1.
Thanks in advance!
I'm writing a cordova app that was starting bluetooth just fine until, without any known change, it suddenly just hangs and my gui just sits there like duh forever. note 4 android 6 cant root it so ive got the bloat and the upgrade cycle slooowdown
I have OP7 PRO running android 10 and stock Oxygen OS (not root).
When I pair my device to my car bluetooth set everything works fine, but once the connection is lost it will not auto-reconnect the next time i'm in my car.
Moreover, in order to connect again i need to do the pairing again (not just select the device from the existing devices list).
I saw tons of threads online about this with no solution, some mentioned they think it's an issue with android OS and not the phone itself (this is supported by the fact that my wife just got a new Xiaomi and have the exact same problem).
Does it make sense that this is a global Android issue and has no fix for such a long time? did anyone experience it and managed to fix it?
I would guess at an issue with the car Bluetooth. May be theres a firmware update for that ?
UrbanBushman said:
I would guess at an issue with the car Bluetooth. May be theres a firmware update for that ?
Click to expand...
Click to collapse
That was my first thought, but it seems that the issue is on the device side as i can see that after connecting the device doesn't appear in the previously connected devices list.
As if the phone forgets it for some reason.
I've had occasional problems too. I'm using Launcher 10. Just last week, I turned on my wifi before starting my car as usual. It connected, then disconnected 2 times and then was stable. There's been times where I'll restart my car to fix it. It's irritating but who knows what can be done about it.
I have a rooted stock op7pro and I have a Samsung active2 watch that randomly disconnects and reconnects once or twice an hour. I have battery set to all Samsung apps on my phone to not optimize battery usage and I have no idea why it does this.
Sent from my OnePlus7Pro using XDA Labs
I have understood that it's also possible that it depend on the order in wich you connect.
You should first have to connect the car to the phone instead of the phone to the car.
Iow have the car lookup the phone
Yes, i head a lot about people with flaky connection but i hope that was the situation, for me it won't reconnet 100% of the times.
Changing the order of connections didn't work.