Database Info

No 3G icon or data connection

Hello everyone,
I got my Captivate yesterday shipped from letstalk.com. Everything with it has been working well, except I don't get a data connection with it at all, except WiFi.
As instructed by the sticker on the box the sim I am using is from my old phone, a Samsung SGH-A707 flip phone. The sim is a little over two years old. When the sim is in that phone, I get a 3G icon immediately.
I have tried turning the phone off, leaving it for several minutes, turning it back on again. Also removing the battery.
When I go to Settings, Wireless and Networks, Mobile Networks, Access Point Names, I see ATT WAP listed. I have tried adding another Access Point Network based on settings seen elsewhere in this forum which differed slightly by specifying a username and password, and not having the proxy and port set. But selecting this other APN has no change.
When I go to Network Operators all I see is an unselectable 'Default Setup' item. Others have reported seeing network connection information there, can anyone confirm on their Captivate?
Checking or unchecking 'Data roaming' does not seem to have any effect.
Under Settings, About Phone, Status the Mobile Network Type is listed as 'HSDPA' but Mobile Network State is 'Disconnected'.
LetsTalk are sending me a new SIM to try, but since I get a 3G connection on my old phone my suspicion is that this is a phone problem.
Does anyone have any other ideas though? Any help would be much appreciated.

Wow well you found something I hadn't yet. There was some talk about whether the captivate did hsdpa or not.. and according to the setting you looked at, it does. In that setting does it show your network is on aT&T? You shouldn't have to create a new APN, the default one should work. Sure you don't have the phone in airplane mode? I'm sure that's a stupid question, just asking.

If you don't have a 3G sim card I hear 3G wont work. You can get a new sim from ATT for free. Oh and about hsdpa ATT disables that Icon and uses a 3G one. I seen a test somewhere with two dif phones one with a 3G icon and one with the H getting the same speeds.

radi0chik said:
Wow well you found something I hadn't yet. There was some talk about whether the captivate did hsdpa or not.. and according to the setting you looked at, it does. In that setting does it show your network is on aT&T? You shouldn't have to create a new APN, the default one should work. Sure you don't have the phone in airplane mode? I'm sure that's a stupid question, just asking.
Click to expand...
Click to collapse
Yeah it shows AT&T under Network.
Nope, not in airplane mode, but thanks for checking, I'd rather you'd assume I was stupid than not ask me the question!
YellowGTO said:
If you don't have a 3G sim card I hear 3G wont work. You can get a new sim from ATT for free. Oh and about hsdpa ATT disables that Icon and uses a 3G one. I seen a test somewhere with two dif phones one with a 3G icon and one with the H getting the same speeds.
Click to expand...
Click to collapse
It is a 3G sim, at least that's what it is labeled as. Like I said I (apparently) got a 3G signal on my old phone. And a new sim is on the way.

on the sim does it say 3G with flames around it lol (thats how my last sim was and it was 3G)

I went to the ATT store to get my captivate. I had an old sim ATT logo with flames that worked in a N1, N97, Bold 9700 and iPhone. I too showed no 3G. They had to replace my sim and it started working. They couldn't explain it.
-JChao

labbu63 said:
on the sim does it say 3G with flames around it lol (thats how my last sim was and it was 3G)
Click to expand...
Click to collapse
That's the one, flames and 3G.
jiayi345 said:
I went to the ATT store to get my captivate. I had an old sim ATT logo with flames that worked in a N1, N97, Bold 9700 and iPhone. I too showed no 3G. They had to replace my sim and it started working. They couldn't explain it.
-JChao
Click to expand...
Click to collapse
Great, that gives me some hope the new sim that is on the way could fix it, thanks!

I had this problem as well. This fix worked for me:
Settings > Wireless and network > Mobile Networks
Check both boxes
- Use packet data
- Data roaming
ATT / Captivate Android 2.2
Hope this helps,

Did you find a solution for this? I'm having the exact same problem with my Captivate. No 3G icon and no packet data connection or mms. When I try to go to a page it immediately gives me the "not found: check your data connection" page, and when I try to send a mms, the 3G icon appears like if it was trying to connect and send it and then disappears when the message fails to send.

I just updated to 2.2 today and I no longer have 3G as well.

just an FYI as long as wifi is turned on you will not see the 3g icon.
I have noticed that when you turn wifi off you generally will not see the 3g icon until you do something with the phone that requires data connections
Turn off wifi and try opening a website via browser...the 3G icon should pop-up automatically at that point

scottlinux said:
I had this problem as well. This fix worked for me:
Settings > Wireless and network > Mobile Networks
Check both boxes
- Use packet data
- Data roaming
ATT / Captivate Android 2.2
Hope this helps,
Click to expand...
Click to collapse
Hello sir, I tried this and now i have 3G(icon popped up and internet/mms works) but am i incurring roaming charges?

For me even that's not working, I think my stupid phone is broken.

When I got a refub'ed Captivate for my partner via AT&T online store since it was only $49, I followed the instructions that came on the box, and everything worked except no 3G/data. So thinking that it might be because of a refurb'ed unit, I called AT&T. They told me to bring it into a corp office store. Fortunately, there's one right down the street from me. I took it in, they fiddled with it for about an hour, including swapping 3 different SIMs, and told me that it was a defective phone. I asked then how do I get a replacement. The rep told me to contact cust service for them to ship a replacement out and it'll include instruction to ship the defective one back since they can't replace refurb unit there at the store. So I went out to my car, called the cust service. The cust service rep told me that I have to send the defective one in first before they'll send me a replacement. I got angry and I went right back in the store, grabbed the rep that was helping me out and told him to please talk to the cust service rep to work things out because I'm not leaving the store until it's resolved. So they talked on the phone for about another 30 min. Then they hung up. The rep fiddled with it for another min, then handed me the phone and the 3G/data was working. Appearantly it was the way that the phone was registered with the system, something was out of whack and 3G/data was not available for that phone line. I then recalled that when I ordered the phone from AT&T, I got an email with instructions that I had to follow, which I did, then I followed the instructions that came with the box. I didn't think much at the time, but it seems like the instruction was telling to do the same thing as the email's instruction was except it was via a slightly different way. So I think I might have inadvertly register the phone twice. In any case, when that happens, 3G/data is not available and yet, the reps checking in the system found the account was setup correctly with the proper plans, changed plans, swapped SIMs, and came to the conclusion of defective phone when the phone was perfectly fine. I don't know if this will help any one. But if your phone is not flashed or rooted, you might want to have AT&T check your account and phone registration.

Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Worked for me, i have a samsung captivate thats rooted running on 2.2 froyo and i was deleting some user data,believe it was dialer data (do not delete that, it also deletes your texts) and i all of a sudden my internet stopped working,i tried every setting and i even think there weren't any APN in the list of APNs because of deleting rampage, so i reset my phone and after that i reset the APN back to default settings and rebooted my phone and it worked. For some of you guys, if it still has an APN(the cingular one) in the list of APNs then all you have to do is reset it back to default by clicking menu with the menu button on your phone and click reset. It should work.

Sreenadh said:
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Worked for me, i have a samsung captivate thats rooted running on 2.2 froyo and i was deleting some user data,believe it was dialer data (do not delete that, it also deletes your texts) and i all of a sudden my internet stopped working,i tried every setting and i even think there weren't any APN in the list of APNs because of deleting rampage, so i reset my phone and after that i reset the APN back to default settings and rebooted my phone and it worked. For some of you guys, if it still has an APN(the cingular one) in the list of APNs then all you have to do is reset it back to default by clicking menu with the menu button on your phone and click reset. It should work.
Click to expand...
Click to collapse
you just replied to a thread 5 months dead..

Thank you for updating.
Sreenadh said:
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Click to expand...
Click to collapse
Worked like a charm on my Samsung Vibrant S on Virigin ... this gem of a tip shall be remembered. This started yesterday on the road when data was needed for a work emergency. If only I'd known it then. :-(
Now to fix the Wi-fi from turning itself on and off of it's own free will. *sigh*
Thanks for posting on an old post Sreenadh. You saved the day!

TRusselo said:
you just replied to a thread 5 months dead..
Click to expand...
Click to collapse
...and, it looks like someone found it useful.. Five months, or five days, or five minutes.. If it isn't helping, why say anything at all?
roguegrl said:
Worked like a charm on my Samsung Vibrant S on Virigin ... this gem of a tip shall be remembered. This started yesterday on the road when data was needed for a work emergency. If only I'd known it then. :-(
Now to fix the Wi-fi from turning itself on and off of it's own free will. *sigh*
Thanks for posting on an old post Sreenadh. You saved the day!
Click to expand...
Click to collapse

Hey Guys ok so i am with Rogers in Toronto...I flashed it to stock but have flashed it using AT&T stock (Dont ask why) and now i am unable to use my data... Any help would be greatly appreciated...i am able to use my phone with no issues....

Got my 3G back.
Sreenadh said:
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Worked for me, i have a samsung captivate thats rooted running on 2.2 froyo and i was deleting some user data,believe it was dialer data (do not delete that, it also deletes your texts) and i all of a sudden my internet stopped working,i tried every setting and i even think there weren't any APN in the list of APNs because of deleting rampage, so i reset my phone and after that i reset the APN back to default settings and rebooted my phone and it worked. For some of you guys, if it still has an APN(the cingular one) in the list of APNs then all you have to do is reset it back to default by clicking menu with the menu button on your phone and click reset. It should work.
Click to expand...
Click to collapse
Dude, thank you so much !

[Q] [Solved] APN settings USA AT&T GoPhone

Hi
I am currently in the US for holiday. Bought two prepaid att go phone cards already in Germany and activated them. The Data connection in my wifes SAMSUNG SIII mini (stock) works as it should.
In my HTC ONE SV I only get EDGE working. No matter which APN settings I use as soon as I switch on something else as GSM only in Network data plan.it disconnects completely from Mobile and states "Service not available"
My SV is unlocked and rooted and running with the Russian ROM
Any quick suggestion what can help,
Edit: I went to a AT&T shop here. They were very helpful but couldn't get it working. Tried more things and at one point all APN settings were gone. After that I tried for the first time the "Reset to default" and it loaded the ATT Phone settings.
After a restart everything works. I have here with H sign in taskbar a download of 5Mbps and upload of 1Mbps.
I attach the screenshots of the settings

[Q] HTC One E8 bought from Etotalk APN issues (AT&T)

So I bought the HTC Once E8 from Etotalk, which came with all the Chinese apps removed and the Google Play store added. I went to the ATT store to get a nano sim, and calls and texts work just fine. My issue is with the data connection. I have done a lot of google fu, and have tried the same settings that people are using for UK M8's but am still having issues. From my understanding the bands are supported, so It should just be a configuration issue.
Would anybody be able to shed some light on this for me? This is my first overseas phone, and I have only had experience with vanilla Android installs to date.
Also, the first thing I did was install the software update from HTC, which probably wasn't the smartest move. I don't see how this would affect APN settings though....
Let me know if any other info is needed, thanks in advance for any help!!

ethansc said:
So I bought the HTC Once E8 from Etotalk, which came with all the Chinese apps removed and the Google Play store added. I went to the ATT store to get a nano sim, and calls and texts work just fine. My issue is with the data connection. I have done a lot of google fu, and have tried the same settings that people are using for UK M8's but am still having issues. From my understanding the bands are supported, so It should just be a configuration issue.
Would anybody be able to shed some light on this for me? This is my first overseas phone, and I have only had experience with vanilla Android installs to date.
Also, the first thing I did was install the software update from HTC, which probably wasn't the smartest move. I don't see how this would affect APN settings though....
Let me know if any other info is needed, thanks in advance for any help!!
Click to expand...
Click to collapse
You probably lost the etotalk modrom while updating, but that shouldn't be a big deal. Though it may have overwritten the predefined APN settings?
Did you manualy check your APN settings under settings --> mobile data --> sim1 --> access point names?

matthijsph said:
You probably lost the etotalk modrom while updating, but that shouldn't be a big deal. Though it may have overwritten the predefined APN settings?
Did you manualy check your APN settings under settings --> mobile data --> sim1 --> access point names?
Click to expand...
Click to collapse
Yeah that's what I think happened, is that I lost the modrom. I wouldnt think that would affect the APN though, isn't that supposed to be unique to each country, or something of the sort? I will send Etotalk a message and ask them if there's a chance that could be it anyways.
I have indeed tried keying it in manually, trying every combination from default, to the one I got from the ATT rep, to the ones I have found online from different forums.

Fixed
I tried using the legacy cingular APN. Apparently my grandfathered unlimited data plan was on these old codes, ie. 3G only...
Thanks anyways.

Can't turn on data using the Verizon G5 on AT&T?

I just bought a used Verizon LG G5 (VS987), however my carrier is AT&T. After putting in the Sim card, calling and texting works but when I go to turn on mobile data in the settings, I get a popup that says "Add Mobile Service Please contact Customer Service at (800) 922-0204 for assistance."
I have called both that customer service number for Verizon ^ and also AT&T. I made sure that my IMEI was updated on our AT&T plan, and I have the right APN settings put in. When I called Verizon, the guy didn't really have much to say except that the device is unlocked but full access to features can't be guaranteed, and I am aware that Verizon and AT&T use different wireless bands, which he explained, but I should be able to at least have some kind of data. We both agreed that this is just some piece of Verizon software keeping me from using data, and he suggested rooting the phone to get a workaround.
One suggestion that I saw in some forums and tried was that resetting the network settings in Backup and Reset does turn mobile data on by default, however I get the same Verizon popup as soon as I open any browser, and other apps just say there is no connection, although when I do this I can see that I am getting either HSPA or 4G data, it just seems like it's being blocked by this Verizon stuff. Messing around with other setttings such as Data roaming and System select didn't change anything.
Does anyone have any experience using a Verizon G5 on AT&T? I saw a video of someone demoing T-Mobile 4G data on the Verizon model, and another user on XDA said that he put in his T-Mobile sim and it worked perfectly. My best guess on where to go from here is to unlock and root, and see if I can install a custom rom to get around this. Does anyone know if there is a stock LG rom without all of the Verizon bloatware installed, maybe a stock rom for the unlocked model of the G5? Any suggestions on how to get this to work are appreciated, and I think this is posted in the right place, I'm an active reader on XDA but this is one of my first posts
Thanks to anyone that reads all of this!

Update: I reset the phone to factory settings and set it up with the sim card from AT&T in it. Since then I can turn on mobile data, and the notification bar shows I have data (mostly HSPA), however I have no connection when I try to load a webpage. Tomorrow morning i'll stop by the AT&T store and see if there's anything they can do.

jayscoottey said:
Update: I reset the phone to factory settings and set it up with the sim card from AT&T in it. Since then I can turn on mobile data, and the notification bar shows I have data (mostly HSPA), however I have no connection when I try to load a webpage. Tomorrow morning i'll stop by the AT&T store and see if there's anything they can do.
Click to expand...
Click to collapse
Did you add the correct APNs for AT&T in the phone when you put in your sim? you need it for internet and MMS
Did you which it to Gobal or other option that is not LTE/CDMA?

Same problem here
jayscoottey said:
Update: I reset the phone to factory settings and set it up with the sim card from AT&T in it. Since then I can turn on mobile data, and the notification bar shows I have data (mostly HSPA), however I have no connection when I try to load a webpage. Tomorrow morning i'll stop by the AT&T store and see if there's anything they can do.
Click to expand...
Click to collapse
Was your problem solved? I'm having the same problem with another Verizon LG Device. If it was solved, what did you do?

Question Lack of Verizon Compatibility

I installed a Teyes CC3 unit about a month ago. I have a Verizon unlimited data plan and hotspot so I was using this combination to receive WiFi. It was a bit inconsistent so I called Verizon and negotiated a good monthly rate for an added android tablet line. I picked up a sim card from Verizon and installed it in the sim card slot as shown in the Teyes direction or what appeared to be the sim slot. The unit indicates 2 sim slots but I could only locate one. The exposed sim slot was poorly installed and it was tricky to insert the sim card. I now wonder if the two sim slots are hidden behind the perimeter trim? After installing the sim card it did not show up on the sim card interface. I called Verizon to activate the sim card to confirm it was properly installed and the rep. stated that Verizon does NOT support the Teyes android unit! Question: 1. Could anyone confirm if they have been able to connect to Verizon with a Verizon sim card? 2. Is the sim slot(s) visible on the unit or are they buried behind the plastic trim piece. Thank you

Does it have an external sim reader.The joying I have has to have the card all the way to the right on the reader for the unit to pick up the card.I am also trying to get onto the Verizon network, but no dice. I had to trick the network into thinking my unit is a phone for them to give me service, that's as far as I got. Still playing with the APN settings, but nothing get.

Did you ever find an answer to this? I have a verizon sim card as well. Shows 4G but no actual data

Didn't pursue this further after Verizon stated they don't support the T'eyes unit. I just use Hotspot on my unlimited data Verizon plan. I downloaded a Hotspot Automatic app so with Hotspot activated my phone automatically connects to the T'eyes when I turn on the radio. Works fine.

Slice235 said:
Didn't pursue this further after Verizon stated they don't support the T'eyes unit. I just use Hotspot on my unlimited data Verizon plan. I downloaded a Hotspot Automatic app so with Hotspot activated my phone automatically connects to the T'eyes when I turn on the radio. Works fine.
Click to expand...
Click to collapse
What app did you use?

I don't think these support VZW radio bands.
Just set mine up with VZW, so I was wrong, it must have been my USMobile SIM that didn't support VZW network.

Palumbum said:
What app did you use?
Click to expand...
Click to collapse
App is HotSpot Automatic by Christian Heinisch

See, I still want this to work without my phone hotspot because I'm not the only one who drives the car (and/or has an unlimited plan).
I have a spare Verizon sim for the summer that I'm parking (Visible, my kid is going away to camp) and I notice that when I put it in, I'm getting bars, and a 4G/lte icon. It is connected to the network, but I think the APN just won't populate and it won't let me set it manually.
If it didn't work, there wouldn't be bars I think. I mean, it's obviously registering itself on the network. I've used this sim in plenty of "unsupported" phones before, as long as it supports the right LTE bands, Verizon is basically a GSM carrier now. They will tell you otherwise, but even GSM unlocked phones seem to work in my experience as long as they are activated elsewhere first.

Got it working!

Please share exactly how you’ve accomplished or can you send me a dm? I have been at this for months, spending hours then giving up. Please! That’s awesome
dishe2 said:
Got it working!
Click to expand...
Click to collapse

dishe2 said:
Got it working!
Click to expand...
Click to collapse
By that I mean how did you identify what the APN settings would be? I can’t seem to find something that works.

Did you try to copy the settings from your phone?
Palumbum said:
By that I mean how did you identify what the APN settings would be? I can’t seem to find something that works.
Click to expand...
Click to collapse

j-5 said:
Did you try to copy the settings from your phone?
Click to expand...
Click to collapse
Yeah I’m unable to view them on my iPhone. Google says if carrier allows to check in cellular data settings but mine don’t show there

Palumbum said:
Yeah I’m unable to view them on my iPhone. Google says if carrier allows to check in cellular data settings but mine don’t show there
Click to expand...
Click to collapse
Sorry, you can try googling the apn settings for your carrier, or maybe put it in an Android phone. Or contact your carrier and ask them. There isn't really a network-wide setting that we can give you. I can tell you what I used on my visible line, but it's different then page plus or Verizon post paid or any other Verizon line would be so I'm not sure how useful it would be unless you're also using Visible.

I was able to get internet working on my Teyes CC3 with the following settings, although I will mention that I had to use a 3rd party APN app to unlock the edit function as default it is locked through the android interface.
I spent 2 hours trying to use other recommended APN settings using mms.vtext.com etc and they never worked.
Any options not listed were left as blank, no set, etc.
Verizon Post-paid 4G LTE Unlimited Data Line with a valid Verizon compatible device IMEI
Name
Internet
APN
VZWINTERNET
MCC
311
MNC
480
APN type
default, supl
APN Protocol
IPv4/IPv6
APN Roaming protocol
IPv4
BEARER
HSPA, GPRS, EDGE, eHRPD, UMTS, LTE, HSPAP, IWLAN, HSDPA, NR, HSUPA

sting0387 said:
I was able to get internet working on my Teyes CC3 with the following settings, although I will mention that I had to use a 3rd party APN app to unlock the edit function as default it is locked through the android interface.
I spent 2 hours trying to use other recommended APN settings using mms.vtext.com etc and they never worked.
Any options not listed were left as blank, no set, etc.
Verizon Post-paid 4G LTE Unlimited Data Line with a valid Verizon compatible device IMEI
Name
Internet
APN
VZWINTERNET
MCC
311
MNC
480
APN type
default, supl
APN Protocol
IPv4/IPv6
APN Roaming protocol
IPv4
BEARER
HSPA, GPRS, EDGE, eHRPD, UMTS, LTE, HSPAP, IWLAN, HSDPA, NR, HSUPA
Click to expand...
Click to collapse
Could you tell me the name of the apn app you used. I'm not having much luck finding one that works

sasquatch23 said:
Could you tell me the name of the apn app you used. I'm not having much luck finding one that works
Click to expand...
Click to collapse
I ended up using this one.
Change APN - Apps on Google Play
A fast link to APN Settings
play.google.com
It just opens the default android settings, but it does let me save what I change. The other app in the previous posted video did NOT work for me on my teyes cc3

sting0387 said:
I ended up using this one.
Change APN - Apps on Google Play
A fast link to APN Settings
play.google.com
It just opens the default android settings, but it does let me save what I change. The other app in the previous posted video did NOT work for me on my teyes cc3
Click to expand...
Click to collapse
Hate to dredge up this old chestnut, but did your settings stick? I added the APN, but it disappeared after a time. Any way to get it to stick?

j-5 said:
Hate to dredge up this old chestnut, but did your settings stick? I added the APN, but it disappeared after a time. Any way to get it to stick?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Happy to help.
The settings did save. I rebooted the cc3 unit, and I had data and continue to have data. I did want to try editing the settings a bit, but I noticed when I opened the app and opened the APN settings, that they were blank, despite that my APN settings were still saved in and working in my unit. So yes the settings did stick, I continue to have data and it works perfectly fine, except if I open the app and try to view the settings they will display as blank as if they are not there, but my unit is working!

sting0387 said:
Happy to help.
The settings did save. I rebooted the cc3 unit, and I had data and continue to have data. I did want to try editing the settings a bit, but I noticed when I opened the app and opened the APN settings, that they were blank, despite that my APN settings were still saved in and working in my unit. So yes the settings did stick, I continue to have data and it works perfectly fine, except if I open the app and try to view the settings they will display as blank as if they are not there, but my unit is working!
Click to expand...
Click to collapse
yeah, mine showed for a bit, then disappeared and I have no data and no amount of adding new ones gets me data again :/