Hello everyone,
I got my Captivate yesterday shipped from letstalk.com. Everything with it has been working well, except I don't get a data connection with it at all, except WiFi.
As instructed by the sticker on the box the sim I am using is from my old phone, a Samsung SGH-A707 flip phone. The sim is a little over two years old. When the sim is in that phone, I get a 3G icon immediately.
I have tried turning the phone off, leaving it for several minutes, turning it back on again. Also removing the battery.
When I go to Settings, Wireless and Networks, Mobile Networks, Access Point Names, I see ATT WAP listed. I have tried adding another Access Point Network based on settings seen elsewhere in this forum which differed slightly by specifying a username and password, and not having the proxy and port set. But selecting this other APN has no change.
When I go to Network Operators all I see is an unselectable 'Default Setup' item. Others have reported seeing network connection information there, can anyone confirm on their Captivate?
Checking or unchecking 'Data roaming' does not seem to have any effect.
Under Settings, About Phone, Status the Mobile Network Type is listed as 'HSDPA' but Mobile Network State is 'Disconnected'.
LetsTalk are sending me a new SIM to try, but since I get a 3G connection on my old phone my suspicion is that this is a phone problem.
Does anyone have any other ideas though? Any help would be much appreciated.
Wow well you found something I hadn't yet. There was some talk about whether the captivate did hsdpa or not.. and according to the setting you looked at, it does. In that setting does it show your network is on aT&T? You shouldn't have to create a new APN, the default one should work. Sure you don't have the phone in airplane mode? I'm sure that's a stupid question, just asking.
If you don't have a 3G sim card I hear 3G wont work. You can get a new sim from ATT for free. Oh and about hsdpa ATT disables that Icon and uses a 3G one. I seen a test somewhere with two dif phones one with a 3G icon and one with the H getting the same speeds.
radi0chik said:
Wow well you found something I hadn't yet. There was some talk about whether the captivate did hsdpa or not.. and according to the setting you looked at, it does. In that setting does it show your network is on aT&T? You shouldn't have to create a new APN, the default one should work. Sure you don't have the phone in airplane mode? I'm sure that's a stupid question, just asking.
Click to expand...
Click to collapse
Yeah it shows AT&T under Network.
Nope, not in airplane mode, but thanks for checking, I'd rather you'd assume I was stupid than not ask me the question!
YellowGTO said:
If you don't have a 3G sim card I hear 3G wont work. You can get a new sim from ATT for free. Oh and about hsdpa ATT disables that Icon and uses a 3G one. I seen a test somewhere with two dif phones one with a 3G icon and one with the H getting the same speeds.
Click to expand...
Click to collapse
It is a 3G sim, at least that's what it is labeled as. Like I said I (apparently) got a 3G signal on my old phone. And a new sim is on the way.
on the sim does it say 3G with flames around it lol (thats how my last sim was and it was 3G)
I went to the ATT store to get my captivate. I had an old sim ATT logo with flames that worked in a N1, N97, Bold 9700 and iPhone. I too showed no 3G. They had to replace my sim and it started working. They couldn't explain it.
-JChao
labbu63 said:
on the sim does it say 3G with flames around it lol (thats how my last sim was and it was 3G)
Click to expand...
Click to collapse
That's the one, flames and 3G.
jiayi345 said:
I went to the ATT store to get my captivate. I had an old sim ATT logo with flames that worked in a N1, N97, Bold 9700 and iPhone. I too showed no 3G. They had to replace my sim and it started working. They couldn't explain it.
-JChao
Click to expand...
Click to collapse
Great, that gives me some hope the new sim that is on the way could fix it, thanks!
I had this problem as well. This fix worked for me:
Settings > Wireless and network > Mobile Networks
Check both boxes
- Use packet data
- Data roaming
ATT / Captivate Android 2.2
Hope this helps,
Did you find a solution for this? I'm having the exact same problem with my Captivate. No 3G icon and no packet data connection or mms. When I try to go to a page it immediately gives me the "not found: check your data connection" page, and when I try to send a mms, the 3G icon appears like if it was trying to connect and send it and then disappears when the message fails to send.
I just updated to 2.2 today and I no longer have 3G as well.
just an FYI as long as wifi is turned on you will not see the 3g icon.
I have noticed that when you turn wifi off you generally will not see the 3g icon until you do something with the phone that requires data connections
Turn off wifi and try opening a website via browser...the 3G icon should pop-up automatically at that point
scottlinux said:
I had this problem as well. This fix worked for me:
Settings > Wireless and network > Mobile Networks
Check both boxes
- Use packet data
- Data roaming
ATT / Captivate Android 2.2
Hope this helps,
Click to expand...
Click to collapse
Hello sir, I tried this and now i have 3G(icon popped up and internet/mms works) but am i incurring roaming charges?
For me even that's not working, I think my stupid phone is broken.
When I got a refub'ed Captivate for my partner via AT&T online store since it was only $49, I followed the instructions that came on the box, and everything worked except no 3G/data. So thinking that it might be because of a refurb'ed unit, I called AT&T. They told me to bring it into a corp office store. Fortunately, there's one right down the street from me. I took it in, they fiddled with it for about an hour, including swapping 3 different SIMs, and told me that it was a defective phone. I asked then how do I get a replacement. The rep told me to contact cust service for them to ship a replacement out and it'll include instruction to ship the defective one back since they can't replace refurb unit there at the store. So I went out to my car, called the cust service. The cust service rep told me that I have to send the defective one in first before they'll send me a replacement. I got angry and I went right back in the store, grabbed the rep that was helping me out and told him to please talk to the cust service rep to work things out because I'm not leaving the store until it's resolved. So they talked on the phone for about another 30 min. Then they hung up. The rep fiddled with it for another min, then handed me the phone and the 3G/data was working. Appearantly it was the way that the phone was registered with the system, something was out of whack and 3G/data was not available for that phone line. I then recalled that when I ordered the phone from AT&T, I got an email with instructions that I had to follow, which I did, then I followed the instructions that came with the box. I didn't think much at the time, but it seems like the instruction was telling to do the same thing as the email's instruction was except it was via a slightly different way. So I think I might have inadvertly register the phone twice. In any case, when that happens, 3G/data is not available and yet, the reps checking in the system found the account was setup correctly with the proper plans, changed plans, swapped SIMs, and came to the conclusion of defective phone when the phone was perfectly fine. I don't know if this will help any one. But if your phone is not flashed or rooted, you might want to have AT&T check your account and phone registration.
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Worked for me, i have a samsung captivate thats rooted running on 2.2 froyo and i was deleting some user data,believe it was dialer data (do not delete that, it also deletes your texts) and i all of a sudden my internet stopped working,i tried every setting and i even think there weren't any APN in the list of APNs because of deleting rampage, so i reset my phone and after that i reset the APN back to default settings and rebooted my phone and it worked. For some of you guys, if it still has an APN(the cingular one) in the list of APNs then all you have to do is reset it back to default by clicking menu with the menu button on your phone and click reset. It should work.
Sreenadh said:
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Worked for me, i have a samsung captivate thats rooted running on 2.2 froyo and i was deleting some user data,believe it was dialer data (do not delete that, it also deletes your texts) and i all of a sudden my internet stopped working,i tried every setting and i even think there weren't any APN in the list of APNs because of deleting rampage, so i reset my phone and after that i reset the APN back to default settings and rebooted my phone and it worked. For some of you guys, if it still has an APN(the cingular one) in the list of APNs then all you have to do is reset it back to default by clicking menu with the menu button on your phone and click reset. It should work.
Click to expand...
Click to collapse
you just replied to a thread 5 months dead..
Thank you for updating.
Sreenadh said:
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Click to expand...
Click to collapse
Worked like a charm on my Samsung Vibrant S on Virigin ... this gem of a tip shall be remembered. This started yesterday on the road when data was needed for a work emergency. If only I'd known it then. :-(
Now to fix the Wi-fi from turning itself on and off of it's own free will. *sigh*
Thanks for posting on an old post Sreenadh. You saved the day!
TRusselo said:
you just replied to a thread 5 months dead..
Click to expand...
Click to collapse
...and, it looks like someone found it useful.. Five months, or five days, or five minutes.. If it isn't helping, why say anything at all?
roguegrl said:
Worked like a charm on my Samsung Vibrant S on Virigin ... this gem of a tip shall be remembered. This started yesterday on the road when data was needed for a work emergency. If only I'd known it then. :-(
Now to fix the Wi-fi from turning itself on and off of it's own free will. *sigh*
Thanks for posting on an old post Sreenadh. You saved the day!
Click to expand...
Click to collapse
Hey Guys ok so i am with Rogers in Toronto...I flashed it to stock but have flashed it using AT&T stock (Dont ask why) and now i am unable to use my data... Any help would be greatly appreciated...i am able to use my phone with no issues....
Got my 3G back.
Sreenadh said:
Go to Settings -> Wireless and network -> Mobile networks -> Access Point Names. Inside that option go to Menu -> Reset to default. (Reboot your phone)
Worked for me, i have a samsung captivate thats rooted running on 2.2 froyo and i was deleting some user data,believe it was dialer data (do not delete that, it also deletes your texts) and i all of a sudden my internet stopped working,i tried every setting and i even think there weren't any APN in the list of APNs because of deleting rampage, so i reset my phone and after that i reset the APN back to default settings and rebooted my phone and it worked. For some of you guys, if it still has an APN(the cingular one) in the list of APNs then all you have to do is reset it back to default by clicking menu with the menu button on your phone and click reset. It should work.
Click to expand...
Click to collapse
Dude, thank you so much !
Related
My Htc Arrive can no longer connect to the sprint cellular network and under the settings it gives me no options to change the prl or anything, only to turn the data on and off switch from home network to automatic and roam to no roaming. I took it into sprint and they were unable to do anything even when checking the diagnostics and everything. Any help would be greatly appreciated.
tjeeeeee said:
My Htc Arrive can no longer connect to the sprint cellular network and under the settings it gives me no options to change the prl or anything, only to turn the data on and off switch from home network to automatic and roam to no roaming. I took it into sprint and they were unable to do anything even when checking the diagnostics and everything. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Did they try a hard reset?
Is the network type on home network instead of automatic?
They pulled the battery, hard reset, and even when on home or automatic the carrier name never showed up
Thats a really crappy situation alltogether.
Id call customer service and bxtch until they gave you a new one. I dropped mine the 32nd day i owned it. But i also had that wierd no mms bug. I had to call a few times and at the store they had to "really double check everythin" put it into field test hard reset etc and then customer service mailed me a new one with a box for the old. I had to talk to a manager a few times over the phone as well but totally worth it. Your only other option is pray mwang comes out with a hspl really soon and flash it, rumor is hes working on it.
Its fine, I ended up getting a replacement phone anyways which probably was better anyways as it came with nodo, which allowed for me to have a back up of nodo incase i need to downgrade in the future.
I was out in the country trying to get my phone connected to a network as the rest of my family (same plan) had connections with their iphones. Low and behold a new setting shows up in mobile networks that I had not seen before, Access Point Names. My biggest mistake was changing settings in something I knew nothing about but I did and pressed restore factory default. Once I reached an area that had a data connection, it seemed all worked well until I tried to send a text. I soon found out I couldn't send or receive any texts/calls.
I've flashed to stock, updated prl, and nothing has worked. I tried to change apn settings using those from this site 4GLTE, but it proved futile. Now I'm stuck and more frustrated than I was before I couldn't get service.
I feel like an idiot and really could use some help! Thanks!
emfajardo2 said:
I was out in the country trying to get my phone connected to a network as the rest of my family (same plan) had connections with their iphones. Low and behold a new setting shows up in mobile networks that I had not seen before, Access Point Names. My biggest mistake was changing settings in something I knew nothing about but I did and pressed restore factory default. Once I reached an area that had a data connection, it seemed all worked well until I tried to send a text. I soon found out I couldn't send or receive any texts/calls.
I've flashed to stock, updated prl, and nothing has worked. I tried to change apn settings using those from this site 4GLTE, but it proved futile. Now I'm stuck and more frustrated than I was before I couldn't get service.
I feel like an idiot and really could use some help! Thanks!
Click to expand...
Click to collapse
call your carrier and check your apn setting with them. Fastest and easiest way.
Help request: LTE Data works,"no service" otherwise. IMEI/number, but no texts/calls.
Software: Android 5.0.1 Skydragon M8 v2.0 Sense 7
Many people have posted issues with LTE where their cellular signal was fine for "2G" functions like calls and texts.
I'm having the opposite problem. After leaving airplane mode (landing at an airport today), I have a "No Service" message in the status bar drop down (notification tray), and the Settings>Network information page shows "Not Registered." However, I do have an IMEI (see details below). However, LTE data works perfectly fine.
I've obviously tried changing the settings in Settings>Mobile Data (preferred network to Global / LTE / LTE/legacy 3GPP mode) connection type global/auto/LTE/etc), to no avail. If LTE is connected it works flawlessly, but I cannot make calls or texts, and show not registered on the network. Data roaming is set to deny, but even allowing roaming does not change the situation.
Before this happened, I HAD gone through all the XTended Settings, and even 'looked' at (but did NOT change) some advanced settings pages, including the 'hidden' HTC network info page ( *#*#4636#*#* ). Again, however, I didn't change anything -- unless by accident?!
Does this sound familiar to anyone? Anyone know if I may have inadvertently changed something and can change it back (a setting that would persist in the hardware through NANDROID restores and factory resets...). Or, any other advice to restore the cellular service connection to normal?
I've tried a full NANDROID restore (multiple times) to a working copy, and a factory reset. I have limited access to a PC since I'm traveling, so re-flashing the VZW firmware or stock recovery or lollipop/verizon RUU would be challenging.
I did spend a good 45 minutes (at a library, my only PC access!) searching the forums and web, but to no avail.
Settings information:
OPperator Name: Verizon
Signal Strength -114 (I've had better but still have the same issues)
Mobile Network type: LTE
Service state: In service
IMS service state: Not Registered
Roaming: Not Roaming
Phone Identity page:
IMEI shows up (15-digit number...how can I verify I didn't mess this up?)
Phone Number is correct
IP Address: 100.66..... (looks good)
Any help is GREATLY appreciated!
Same here
I'm having the same issue. When i try to make a call my LTE bars drop to nothing and it says call failed no network available. Any ideas or help would be nice. I was using venom rom as well. I'm currently trying to flash the newest RRU to see if that resets things. I'm wondering if it somehow my sim card. I took it from my droid turbo. I've made sure to turn off advanced calling on my VZW account though.
Drhoot said:
I'm having the same issue. When i try to make a call my LTE bars drop to nothing and it says call failed no network available. Any ideas or help would be nice. I was using venom rom as well. I'm currently trying to flash the newest RRU to see if that resets things. I'm wondering if it somehow my sim card. I took it from my droid turbo. I've made sure to turn off advanced calling on my VZW account though.
Click to expand...
Click to collapse
I had this same issue, running from ruu then rooted. I didn't noticed until I started seeing voice mail notifications but never heard the phone ring. When I tried to dial out I got the immediate call lost message. I couldn't figure what was causing it so I just did a reset. I made sure not to restore any systems data from prior to the Lollipop upgrade. At this point everything is working, the only thing I haven't installed yet is the xposed framework and sense 6 toolbox.
mc_365 said:
I had this same issue, running from ruu then rooted. I didn't noticed until I started seeing voice mail notifications but never heard the phone ring. When I tried to dial out I got the immediate call lost message. I couldn't figure what was causing it so I just did a reset. I made sure not to restore any systems data from prior to the Lollipop upgrade. At this point everything is working, the only thing I haven't installed yet is the xposed framework and sense 6 toolbox.
Click to expand...
Click to collapse
What kind of reset did you do? I know my issue is slightly different, but I did a full RUU-flash yesterday (latest lollipop version) and still no luck. Unfortunately I'm out of the country now and access to a computer is limited, and I don't even have a SIM card yet to check if cellular service would work anyway.
I do intend to do a flash of the stock recovery and radios once I have the time and access, but that may be a while...
Still, I'll keep checking this thread to see if anyone posts any other options
lifebringer123 said:
What kind of reset did you do? I know my issue is slightly different, but I did a full RUU-flash yesterday (latest lollipop version) and still no luck. Unfortunately I'm out of the country now and access to a computer is limited, and I don't even have a SIM card yet to check if cellular service would work anyway.
I do intend to do a flash of the stock recovery and radios once I have the time and access, but that may be a while...
Still, I'll keep checking this thread to see if anyone posts any other options
Click to expand...
Click to collapse
Just go into settings and to Backup & Reset , this will return your phone to a fresh install and remove all non bundled apps.
Before doing the reset try going into Settings then Call then change Preferred Network to Global, or toggle from LTE then back to Global.
I jumped on the $250 eBay deal for this phone. Today, after installing my tmobile SIM card I can talk and text fine but the mobile data is not functioning. I've gone into the "Data Manager" menu and turned on the "mobile data"...airplane function is off....performed a factory reboot, and still nothing. What am I missing? Do I need to do an APN configuration? Being an unlocked phone, I thought it was a matter of plug and play. Data works fine in my moto g. Please help. Thanks
scrubsr1 said:
I jumped on the $250 eBay deal for this phone. Today, after installing my tmobile SIM card I can talk and text fine but the mobile data is not functioning. I've gone into the "Data Manager" menu and turned on the "mobile data"...airplane function is off....performed a factory reboot, and still nothing. What am I missing? Do I need to do an APN configuration? Being an unlocked phone, I thought it was a matter of plug and play. Data works fine in my moto g. Please help. Thanks
Click to expand...
Click to collapse
Yes, get your apn settings from Tmobile and enter inSettings, Networks,mobile networks, access point names. Create a new APN for t-mobile...save....choose the new apn. .... see if it works
Yes, sounds like you'd have to enter APN values, especially if voice and text are working. Not all phones auto populate APN values.
Not sure if these APN values are correct but it's a starting point: http://apn-settings.com/t-mobile-apn-settings-step-by-step-configuration/ . This is T-mobile's site for generic data settings for non T-Mobile phones: https://support.t-mobile.com/docs/DOC-2090
You guys were spot on...contacted tmobile and they had me up and running in less than 5 min with the proper APN config. Thanks for the help fellas.
Now if I could just get the latest software update without having to purchase the gophone SIM/plan...
Does Hotspot feature work for you?
scrubsr1 said:
You guys were spot on...contacted tmobile and they had me up and running in less than 5 min with the proper APN config. Thanks for the help fellas.
Now if I could just get the latest software update without having to purchase the gophone SIM/plan...
Click to expand...
Click to collapse
Sorry to revive such an old post, but I am thinking of doing the same thing right now ($200 for a new unlocked AT&T Flex2), and wondered if your WIFI Hotspot function on the phone works with TMobile?
I've tried other AT&T unlocked phones on TM, and when I turn on the hotspot feature, I get a network error.
Thanks.
ps. Can you post the APN settings that TM gave you?
I just bought a used Verizon LG G5 (VS987), however my carrier is AT&T. After putting in the Sim card, calling and texting works but when I go to turn on mobile data in the settings, I get a popup that says "Add Mobile Service Please contact Customer Service at (800) 922-0204 for assistance."
I have called both that customer service number for Verizon ^ and also AT&T. I made sure that my IMEI was updated on our AT&T plan, and I have the right APN settings put in. When I called Verizon, the guy didn't really have much to say except that the device is unlocked but full access to features can't be guaranteed, and I am aware that Verizon and AT&T use different wireless bands, which he explained, but I should be able to at least have some kind of data. We both agreed that this is just some piece of Verizon software keeping me from using data, and he suggested rooting the phone to get a workaround.
One suggestion that I saw in some forums and tried was that resetting the network settings in Backup and Reset does turn mobile data on by default, however I get the same Verizon popup as soon as I open any browser, and other apps just say there is no connection, although when I do this I can see that I am getting either HSPA or 4G data, it just seems like it's being blocked by this Verizon stuff. Messing around with other setttings such as Data roaming and System select didn't change anything.
Does anyone have any experience using a Verizon G5 on AT&T? I saw a video of someone demoing T-Mobile 4G data on the Verizon model, and another user on XDA said that he put in his T-Mobile sim and it worked perfectly. My best guess on where to go from here is to unlock and root, and see if I can install a custom rom to get around this. Does anyone know if there is a stock LG rom without all of the Verizon bloatware installed, maybe a stock rom for the unlocked model of the G5? Any suggestions on how to get this to work are appreciated, and I think this is posted in the right place, I'm an active reader on XDA but this is one of my first posts
Thanks to anyone that reads all of this!
Update: I reset the phone to factory settings and set it up with the sim card from AT&T in it. Since then I can turn on mobile data, and the notification bar shows I have data (mostly HSPA), however I have no connection when I try to load a webpage. Tomorrow morning i'll stop by the AT&T store and see if there's anything they can do.
jayscoottey said:
Update: I reset the phone to factory settings and set it up with the sim card from AT&T in it. Since then I can turn on mobile data, and the notification bar shows I have data (mostly HSPA), however I have no connection when I try to load a webpage. Tomorrow morning i'll stop by the AT&T store and see if there's anything they can do.
Click to expand...
Click to collapse
Did you add the correct APNs for AT&T in the phone when you put in your sim? you need it for internet and MMS
Did you which it to Gobal or other option that is not LTE/CDMA?
Same problem here
jayscoottey said:
Update: I reset the phone to factory settings and set it up with the sim card from AT&T in it. Since then I can turn on mobile data, and the notification bar shows I have data (mostly HSPA), however I have no connection when I try to load a webpage. Tomorrow morning i'll stop by the AT&T store and see if there's anything they can do.
Click to expand...
Click to collapse
Was your problem solved? I'm having the same problem with another Verizon LG Device. If it was solved, what did you do?