Database Info

[Completed] Softbricked a Galaxy S3 Virgin phone. Help?

I guess i goofed and got softbricked. here is the Odin log.
I used the video on the xda-developers youtube channel, but i cant post a link on the thread due to the 10 post rule.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_BMC_I747MVLUEMK5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any way to fix this? Id like to continue with the root, however if absolutely necessary ill go back to stock provided anyone knows where to get it.

Hi,
Here is a dedicated help thread in your device section that you can ask for help in,
http://forum.xda-developers.com/galaxy-s3/help/help-thread-galaxy-s3-question-t2690307
I suggest you add more detail when you post there... Specifically, exactly what you tried to flash.
Good luck!

[Completed] S3 AT&T I747 softbrick help?

Currently it can run download mode and recovery mode. After the 2nd splash screen it goes to black. To go into these modes, I must remove the battery to shut it down then restart it.
I have tried many things to fix it:
Recovery > Restore Factory Default failed due to error
Odin > Install custom recovery > Restore failed due to error
Odin > flash firmware failed due to:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have no idea what to do and I Do not have an SD card. What are my options?
Thank you

Hi there,
All you need is in this thread solved: [UNBRICK][GUIDE][Q&A] How to solve a "Brick" for n00bs
Also for other guides and tutorials please see this index: ★ ☆ ✰Sticky Roll-Up A Guide To All Guides and Q&A's ✰ ☆ ★
For more questions please use this forum but first you need to register an account on XDA:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

Hello, In my OP I stated I already did those methods. If you could give me any more advice, that would be fantastic. The problem I have is mentioned in the first post as well, the Fail (Auth)

kenz111 said:
Hello, In my OP I stated I already did those methods. If you could give me any more advice, that would be fantastic. The problem I have is mentioned in the first post as well, the Fail (Auth)
Click to expand...
Click to collapse
Return to the thread you created in AT&T S3 section. You have an answer waiting.

[Completed] How to fix nand write start fail

I bought a Galaxy Grand Prime (G530H) device few days ago and It runs on Androdi KitKat. Yesterday I went to update it's firmware to Android Lollipop using odin.
when the process start it shows me this
what do i need to do to fix this problem? please help me..
my email is | [email protected] |
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2BOH7_G530HODD2BOH3_G530HXXU2BOH5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Hello Thank you for using XDA Assist.,
Unfortunately we do not have a dedicated forum for your device.
Please try searching this forum for an answer here http:/c/forum.xda-developers.com/t/galaxy-grand-prime
If not you can always post your question in the General Q&A section here http://forum.xda-developers.com/android/help
Good Luck
Ragnar
2 days no reply. Thread closed

Samsung GT-i9305 destroyed after Downgrade? Odin - sboot.bin FAIL

Hello at all!
First: Sorry for my english. I'm from Germany,but I hope you understand me. I these Forum I think you get the best tips,so I'm here.
My Device: A Samsung Galaxy S3 / GT-i9305
I got a big,big problem with my Phone. I wanted to root it at the beginning ... it doesn't match,because I had Android 4.4.4 and I don't find a solution,do root it with thissystem. So I wanted to downgrade it to a lower version. After ring this my device don't start, it hangs at the Samsung Logo (bootloop) and there is no recovery mode. Download Mode works just very rarely - I don't know the reason why.
If i get it to the Download Mode, I tried to flash in Odin Android 4.4.4 , but all the time there is the same message. You see here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305XXBMD5_I9305DTMBMD1_I9305XXBMD5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It shows every time the same error with 'sboot.bin'.
Now I bought a USB Jig to get at least to download mode.
Is there any solution or Idea to run my good,old S3?
I would be very thankful if someone could help me with my problem.
Sorry for my english, but I hope you know what I want to say
Nice Greets,Postmaschine

!Help! Odin failed whilst flashing stock rom samsung galaxy s6

Just wondered if anyone can help me with this.
Been trying to flash a stock rom onto samsung galaxy s6 as it was stuck in bootloop and from the research i did this was the way to go.
However, after downloading the rom from sammobile and using odin, it fails close to finishing. I've attached the event log if this will help.
All help much appreciated.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU6ERF5_G920FBTU6ERG1_G920FXXU6ERF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

chris9002 said:
Just wondered if anyone can help me with this..........
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device and variants.
https://forum.xda-developers.com/showthread.php?t=3110220
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Tandy TRS-80.