I guess i goofed and got softbricked. here is the Odin log.
I used the video on the xda-developers youtube channel, but i cant post a link on the thread due to the 10 post rule.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_BMC_I747MVLUEMK5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any way to fix this? Id like to continue with the root, however if absolutely necessary ill go back to stock provided anyone knows where to get it.
Hi,
Here is a dedicated help thread in your device section that you can ask for help in,
http://forum.xda-developers.com/galaxy-s3/help/help-thread-galaxy-s3-question-t2690307
I suggest you add more detail when you post there... Specifically, exactly what you tried to flash.
Good luck!
Related
Hi
Below is the error I am getting while flashing the N8000
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8000DDBLL2_N8000ODDBLL2_541027_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
There is then a big red fail box and nothing else happens. During this whole process (about a minute) the screen on the note doesn't change at all.
The file I used in the PDA box is as follows: KIES_HOME_N8000DDBLL2_N8000ODDBLL2_541027_REV00_user_low_ship.tar.md5, only the Auto reboot, F reset and PDA were selected.
Please help
Usual if firmware file is faulty or the wrong format .
jje
It is fixed now.I will write small tutorial over this .. Its like everywhere its written but nowhere solution is given ...I will start a new thread to discuss step by step fix ...
Hello, this is a bit embarrassing seeing as how this is my first post here on XDA.
My issue is that I rooted my 4.4.2 Verizon SCH-i535 galaxy s3 and I bricked it. I know, I was extremely stupid for trying to do this while half-awake at 2 in the morning LOL... but i ended up with a screen stating that "this device has detected a software not authorized by verizon wireless, please go to a branch to get help"
When I use Odin to try and flash any ROMs, this is the result:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
InuyashaITB said:
Hello, this is a bit embarrassing seeing as how this is my first post here on XDA.
My issue is that I rooted my 4.4.2 Verizon SCH-i535 galaxy s3 and I bricked it. I know, I was extremely stupid for trying to do this while half-awake at 2 in the morning LOL... but i ended up with a screen stating that "this device has detected a software not authorized by verizon wireless, please go to a branch to get help"
When I use Odin to try and flash any ROMs, this is the result:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
check out this thread
http://forum.xda-developers.com/showthread.php?t=2791801
you may be able to get away with just flashing the booloader/recovery zip in the second post
good luck
hi, i have a problem with my galaxy s3 lte. i was trying to root the phone and somehow i bricked it . i tried to install the stock firmware android 4.3 through odin, i put it in the pda section but it keeps failing.
This is the log.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
im sure im using the correct file, i tried different usb cables but it wont work. i cant use kies because my pc doesn't detect the phone just odin does.
please help if you can
i have followed several tips online and haven't got any resolved my issue.
(tried with Odin v3.04, v3.07, v3.09, v3.10.6)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOAA_I9500ODDHOA2_I9500DDUHOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help.
justin47 said:
i have followed several tips online and haven't got any resolved my issue.
(tried with Odin v3.04, v3.07, v3.09, v3.10.6)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOAA_I9500ODDHOA2_I9500DDUHOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the Samsung Galaxy S4 at http://forum.xda-developers.com/galaxy-s4 which would be a good starting place as you know since you posted there previously a few months ago. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s4/help where the experts familiar with your device will be best able to guide you.
Good luck!
SOrry about posting in the wrong area
Mike B. said:
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the Samsung Galaxy S4 at http://forum.xda-developers.com/galaxy-s4 which would be a good starting place as you know since you posted there previously a few months ago. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s4/help where the experts familiar with your device will be best able to guide you.
Good luck!
Click to expand...
Click to collapse
Pardon
justin47 said:
Pardon
Click to expand...
Click to collapse
No problem, we're here specifically to point you in the right location.
Once again, good luck!
Thread closed.
hey everyone i have my Galaxy s6 from t mobile rooted and one day i went to power it on and it shows pictures for the Galaxy S6 screen but no picture comes up after the Tmobile Sounds boot screen. I have attempted all black screen fixes i can find as well as TWRP recovery and i cant seem to get the correct file? or something always goes wrong in odin when i try to install the stock firmware. not sure what else to try if anyone has any ideas or needs more information please let me know. thank you.
After It fails my download screen on phone says SW REV. CHECK FAIL. DEVICE:3, BINARY:2
***ODIN LOG***
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU2COF6_G920TTMB2COF6_G920TUVU2COF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)