[Completed] S3 AT&T I747 softbrick help? - XDA Assist

Currently it can run download mode and recovery mode. After the 2nd splash screen it goes to black. To go into these modes, I must remove the battery to shut it down then restart it.
I have tried many things to fix it:
Recovery > Restore Factory Default failed due to error
Odin > Install custom recovery > Restore failed due to error
Odin > flash firmware failed due to:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have no idea what to do and I Do not have an SD card. What are my options?
Thank you

Hi there,
All you need is in this thread solved: [UNBRICK][GUIDE][Q&A] How to solve a "Brick" for n00bs
Also for other guides and tutorials please see this index: ★ ☆ ✰Sticky Roll-Up A Guide To All Guides and Q&A's ✰ ☆ ★
For more questions please use this forum but first you need to register an account on XDA:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

Hello, In my OP I stated I already did those methods. If you could give me any more advice, that would be fantastic. The problem I have is mentioned in the first post as well, the Fail (Auth)

kenz111 said:
Hello, In my OP I stated I already did those methods. If you could give me any more advice, that would be fantastic. The problem I have is mentioned in the first post as well, the Fail (Auth)
Click to expand...
Click to collapse
Return to the thread you created in AT&T S3 section. You have an answer waiting.

Related

[Completed] Softbricked a Galaxy S3 Virgin phone. Help?

I guess i goofed and got softbricked. here is the Odin log.
I used the video on the xda-developers youtube channel, but i cant post a link on the thread due to the 10 post rule.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_BMC_I747MVLUEMK5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any way to fix this? Id like to continue with the root, however if absolutely necessary ill go back to stock provided anyone knows where to get it.
Hi,
Here is a dedicated help thread in your device section that you can ask for help in,
http://forum.xda-developers.com/galaxy-s3/help/help-thread-galaxy-s3-question-t2690307
I suggest you add more detail when you post there... Specifically, exactly what you tried to flash.
Good luck!

[Completed] Samsung Galaxy S3 I747 No SD, can access download and recovery, softbrick, need help!

So my phone forced an update and it caused my phone to brick. I had rooted it but didnt really do anything else to it after that, tried to revert it with Superuser.
I have tried:
Return to factory default (failed due to error)
Flashed a few different recovery menus and tried to return to factory default(failed due to error)
tried flashing multiple firmwares through odin in admin mode, and got the following error with and without PIT:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont have an SD card nor have access to one around me, I can buy one if I cant find a way around this. I really need my phone so I hope people can help me salvage it Thanks
Keep in mind, I dont know too much about this stuff. I may have been using the wrong files (I looked for mine specifically, but I dont know my current firmware nor what firmware to use in specific cases)
Thanks again!
Hi there,
All you need is in this thread solved: [UNBRICK][GUIDE][Q&A] How to solve a "Brick" for n00bs
Also for other guides and tutorials please see this index: ★ ☆ ✰Sticky Roll-Up A Guide To All Guides and Q&A's ✰ ☆ ★
For more questions please use this forum but first you need to register an account on XDA:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Good luck

[Completed] unable to install stock firmware - i9500 (fails at system.img)

i have followed several tips online and haven't got any resolved my issue.
(tried with Odin v3.04, v3.07, v3.09, v3.10.6)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOAA_I9500ODDHOA2_I9500DDUHOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help.
justin47 said:
i have followed several tips online and haven't got any resolved my issue.
(tried with Odin v3.04, v3.07, v3.09, v3.10.6)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOAA_I9500ODDHOA2_I9500DDUHOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the Samsung Galaxy S4 at http://forum.xda-developers.com/galaxy-s4 which would be a good starting place as you know since you posted there previously a few months ago. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s4/help where the experts familiar with your device will be best able to guide you.
Good luck!
SOrry about posting in the wrong area
Mike B. said:
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the Samsung Galaxy S4 at http://forum.xda-developers.com/galaxy-s4 which would be a good starting place as you know since you posted there previously a few months ago. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s4/help where the experts familiar with your device will be best able to guide you.
Good luck!
Click to expand...
Click to collapse
Pardon
justin47 said:
Pardon
Click to expand...
Click to collapse
No problem, we're here specifically to point you in the right location.
Once again, good luck!
Thread closed.

[Completed] Phone is soft bricked!

Hi,
I have a SAMSUNG GALAXY S5 VERIZON and I treid to restore it to its stock rom using ODIN.
I have used every version of odin and I keep getting the same message:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried multiple PC's multiple cables and multiple STOCK MD5 files.
I am Able to get to download mode and recovery boot.
I have tried almost every troubleshoot posted online so far.
On download screen I get SW REV CHECK FAIL: [aboot]Fused 2 > Binary 1
[IMG="ERROR"]
URGENTLY NEED HELP!
Thanks guys
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
Verizon Galaxy S 5 Q&A, Help & Troubleshooting
Good luck!

[Completed] Odin fails to flash stock rom onto S3

I'm having trouble with flashing the stock rom for the Samsung Galaxy S3 on Odin, as I get a fail everytime I try to flash the rom onto my device.
This comes up everytime I try to flash:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The model number is a GT-i9300, and no stock roms so far have succeeded.
I have used Odin 3.07 and Odin 3.09, my samsung drivers are up to date and Odin still fails to flash the rom.
On the S3 it's currently running TWRP version 3.0.2-1, it also asks me whether or not I keep it "System Read only" whenever I go in recovery mode. And each time I always choose the option of keeping it read only. I don't know if these has anything to do with Odin failing to flash the rom but might as well mention it. I was also running CyanogenMod13 for roughly a month before the brick happened.
Any help would be appreciated !
Hello
Thank you for using XDA Assist.
Please use the below link to register a XDA Account first, prior to start posting and replying onto our forums.
Join the Experts
When you complete your registration, I invite you to post over your request in the below forum as our team of experts there should be able to help you:
Galaxy S III Q&A, Help & Troubleshooting
Best regards and good luck.
.
XDA Visitor said:
I'm having trouble with flashing the stock rom for the Samsung Galaxy S3 on Odin, as I get a fail everytime I try to flash the rom onto my device.
This comes up everytime I try to flash:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The model number is a GT-i9300, and no stock roms so far have succeeded.
I have used Odin 3.07 and Odin 3.09, my samsung drivers are up to date and Odin still fails to flash the rom.
On the S3 it's currently running TWRP version 3.0.2-1, it also asks me whether or not I keep it "System Read only" whenever I go in recovery mode. And each time I always choose the option of keeping it read only. I don't know if these has anything to do with Odin failing to flash the rom but might as well mention it. I was also running CyanogenMod13 for roughly a month before the brick happened.
Any help would be appreciated !
Click to expand...
Click to collapse

Categories

Resources