[Completed] Zh&k Blitz- How Do I backup My ROM And Possibly Port A ROM - XDA Assist

I wish some of the xda dev Help me.
I Have a ZH&K BLITZ (PHILIPPINE MADE)
I want to ask them if they can help me to back up my rom and may a port rom for this phone. its becoming a popular phone here in the PH.
Here is the Phone Specs
Architecture-4x ARM Cortex-A7 @ 1.20Ghz
Revision-r0p5
Gpu Vendor- ARM
GPU REnderer-Mali-400 MP
Scaling Governor - sprdemand
model-ZH&K BLITZ (scx35_sp7731geacuccspecAplus_UUI_ts6_m7_dt_zh_k)
Board-sp7731gea
hardware-sc8830
Android version- 4.4.2
api level-19
bootloader-unknown
Build Id-HYST_TS6_M7_BLITZ_V06_2015_05_22
java Vm- dalvik 1.6.0
kernel architecture- armv71
kernel version- 3.10.17
root Access-Yes

PatMigz said:
I wish some of the xda dev Help me.
I Have a ZH&K BLITZ (PHILIPPINE MADE)
I want to ask them if they can help me to back up my rom and may a port rom for this phone. its becoming a popular phone here in the PH.
Here is the Phone Specs
Architecture-4x ARM Cortex-A7 @ 1.20Ghz
Revision-r0p5
Gpu Vendor- ARM
GPU REnderer-Mali-400 MP
Scaling Governor - sprdemand
model-ZH&K BLITZ (scx35_sp7731geacuccspecAplus_UUI_ts6_m7_dt_zh_k)
Board-sp7731gea
hardware-sc8830
Android version- 4.4.2
api level-19
bootloader-unknown
Build Id-HYST_TS6_M7_BLITZ_V06_2015_05_22
java Vm- dalvik 1.6.0
kernel architecture- armv71
kernel version- 3.10.17
root Access-Yes
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for your BLITZ phone but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!

Related

[Completed] need roms for my device

Excuse but this might be to big of a job just hopping it would be done.... Plz plz pretty plz.....☺☺
OK let's get started here is what I knowbabout the device
Nameany genius talk t220
Current android version: 4.4.2(KitKat)
Kernel version:3.4.67 [email protected]#1
Build number: Genius_TALK_T220_20140614
Baseband version: MOLYMOLY.WR8WR8.W1315W1315.MD.WG.MP.V35, 2014/03/11 13:37
CPU:MTK8312 1.2 ghz
GPU: Mali 400 mp
Ram:1 gb
ROM: 8 GB
Screen: 6.95 inches
Resolution:600*1024
Camera: 2 mp front and 5 mp back
Bluetooth: 4.0
Stand by: 2-3 days
Screen color : 16 million colors
Plz guy make the ROMs happens ☺☺☺☺☺☺
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Fast charge for monster x5

Hello, I have phone monster x5 and I want to use on it fast charge - because I think my new cable for charge have usb mode or something wrong because charging takes too long. I have rooted my device but I have error : Your device does not have support for fast charge in its kernel
So, I need to change my kernel for custom kernel with fast charge modifications
Anyone know where can I find such kernel to work proper on my phone? My android version is : 4.1.2, kernel version 3.4.0-perf [email protected]))#1 SMP PREEMPT Thu Dec 10:29:56 CST 2013
I installed bad kernel on my xperia x5 phone and I don't want to change my phone into brick again. I done that using application for windows for flashing..
So, any other solutions meaby or compatible kernels? If possible it would be also good if new kernal will have swap for sd option
Hi,
I can't find anything relevant on XDA for your device. You can ask about it here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
or try Google search perhaps. There doesn't seem to be any Development for it on XDA.
Good luck!

[Completed] Help for an impossible overclock thanks !!!

It happened in his hands a Deco77x with Andorid 4.4.2, not to throw it I put it back to life with a custom ROM, a Andorid 5.1.1 porting a Galaxy A3 currently installed. I tried the Lollifox, the CyanogenMod 12.1, I have tried several kernel including the "Franco kernel", adapted as one its appropriate there. I have traveled far and wide. But going to the point, the terminal mounting a MediaTek MT6572 CPU, 2 Cores, ARM Cortex-A7 at 1.00GHz, I can not in several GHz overclock to bring in more 'of 1.00 ... even if the operations are all going cheap end more 'of 1.00 just does not go. Putting the chip no longer 'of the power holders, perhaps limited by the producers themselves in a specific version for this phone, I've found on the website of MediaTek these data, "Dual-core chip (1.2GHz) ARM Cortex-A7 processor" so just do not understand because 'more' of 1.00 can not go there. I arrived to the extreme and I address you. Here I write some data that might help.
Info Deco77x
-CPU MediaTek MT6572 ARM Cortex-A7 at 1.00GHz
-GPU Mali-400 MP
-root KingRoot
-Flashify
-Recovery "Philz Deco recovery"
-Chamelephon 1.0
-no-Frills CPU Control
-Trickster MOD Kernel Settings
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
thanks the answer ... lighthouse 'so

Post your device information here to help porting

Hi all,
I am requesting every user to post the following info about their device the are using to help porters in porting roms from other device.
The following information should be posted.
1. Your device name.
2. Android version
3. Kernel version (this is most important)
4. GPU ( which GPU it has such as Mali 400, Mali 450, etc).
5. CPU (which CPU it has such as MT6572, Snaapdragon 650 etc).
You can get this info by installing CPU-Z or AIDA64 from playstore.
As for porting the most important things are
1. Kernel version must be same
2. Your processor must be of same manufacturer such as MediaTek
3. Its Gpu must be same.
By this success of porting is 70 to 90 percent so please i request you all to post your above given device info here.
This will become a list and will help porters to find right devices for porting.
Starting myself
My device is Qmobile X35
Android version 4.4.2
Kernel version 3.4.67
GPU is Mali-400MP1
CPU is MT6572
I have ported miui8, cm12.1, cm13, ressurection remix 5.5.9 and 5.6.7 on my device successfully.
Now i m going to port pure stock android lolipop on my device if i find same kernel version to my device with lolipop rom.
I hope this list will help a lot as it will have full list of all devices info.
Thread closed, please do not create duplicates per our forum rules
http://forum.xda-developers.com/and...lp-porting-t3466033/post68793035#post68793035
Nathan
Forum Moderator

[Completed] How to: Custom ROM for my Android HDMI stick - Allwinner A13- Cortex A8

Hello XDA Assist,
Please provide the correct forum link or update the thread so that it can reach to correct audience. I have search some thread before starting but can not find anything related for my device.
I am using a Android HDMI Mini PC stick from last few years and now want to install a custom ROM on it but not sure where to start. I have read couple of forums but the information are so vast that i am not able to grab, what i understand that first basic thing to do is to identify your hardware correctly to find compatible custom ROM and that i did using CPU-Z App then i tried to find compatible ROM but i don't know how to relate the chipset information to find custom ROM and what all are the things i need to check before proceed, So can anyone guide me in below please ?
1. Were i can find the custom ROM like CyanogenMod or similar which can be installed on my Android stick?
2. If i found one then what will be the steps to install it?
3. How take a backup of my firmware/OS so that if anything go wrong then i can restore?
My stick is rooted.
----------------CPU-Z App Summry-----------------------
Brand- leoxsys
Device Manufacturer- Unknown
Model ID- Xoro T1S
Android Version- 4.0.4
Kernel Version- 3.0.8
SoC (Processor) Architecture- ARM (armv7l)
SoC Model- Allwinner A13
SoC Family- 1x ARM Cortex-A8 @960 MHz
Frequency- 1008 MHz*/ Min: 30 MHz - Max: 960 MHz
Main CPU- Cores 1 Cores / 1 Threads
Process- 45 nm
CPUID 41.3.7.C08.2
Revision- R3P2
Features- SWP HALF THUMB FASTMULT VFP EDSP NEON VFPV3
Bogomip-s 1001.88 MIPS
SoC Manufacturer- ARM
SoC Model- Mali-400 MP
OpenGL- Ver. 2.0
RAM- 844 MB (1 GB)
Flash- 503 MB
Thanks
sDas
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

Categories

Resources