Database Info

[Completed] Need Help on TbletPC repairs

I have a Chinese-made tablet PC that uses Android 4.2.2 (probably a nightly version) I am frustrated by because it often hangs frequently and I wanted to root it, repair it and replaced it with Android 5.0 as well as removed bloatwares on it. I am asking what type of AndroidOS Kernel is compatible with these type of TabletPC? It uses dual-core A23 CPU, Model S-718, Android 4.2.2 Firmware version 2.0. The kernel version is 3.4.39 and the build number is GT736FB22Cd-TPa2-V1.2.3.4=20140902release. What is the compatible kernel for these type of TabletPC any help guys? Any help and advise before I delve-in?

Additional Data:
Product Detail
Basic Info
Model NO.: S718 Boxchip A13
Screen Type: Capacitive Screen
Operating System: Android
Screen Size: 7"
Webcam: Webcam
Memory: 512MB
Built-in Microphone: Built-in Microphone
Network Mode: WiFi
Built-in Bluetooth: Without Bluetooth
CPU Core: Dual-Core
Card Reader: Card Reader
Hard Disk Capacity: ≤8G
CPU Type: Allwinner
Front Camera Pixel: 0.3MP-1MP
Battery Capacity: 2000mAh-3000mAh
Rear Camera Pixel: 0.3MP-1MP
Size: 7inch
Color: Multi-Color

Hi there,
I'm sorry but I can't find anything related to your question/device:
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Zh&k Blitz- How Do I backup My ROM And Possibly Port A ROM

I wish some of the xda dev Help me.
I Have a ZH&K BLITZ (PHILIPPINE MADE)
I want to ask them if they can help me to back up my rom and may a port rom for this phone. its becoming a popular phone here in the PH.
Here is the Phone Specs
Architecture-4x ARM Cortex-A7 @ 1.20Ghz
Revision-r0p5
Gpu Vendor- ARM
GPU REnderer-Mali-400 MP
Scaling Governor - sprdemand
model-ZH&K BLITZ (scx35_sp7731geacuccspecAplus_UUI_ts6_m7_dt_zh_k)
Board-sp7731gea
hardware-sc8830
Android version- 4.4.2
api level-19
bootloader-unknown
Build Id-HYST_TS6_M7_BLITZ_V06_2015_05_22
java Vm- dalvik 1.6.0
kernel architecture- armv71
kernel version- 3.10.17
root Access-Yes

PatMigz said:
I wish some of the xda dev Help me.
I Have a ZH&K BLITZ (PHILIPPINE MADE)
I want to ask them if they can help me to back up my rom and may a port rom for this phone. its becoming a popular phone here in the PH.
Here is the Phone Specs
Architecture-4x ARM Cortex-A7 @ 1.20Ghz
Revision-r0p5
Gpu Vendor- ARM
GPU REnderer-Mali-400 MP
Scaling Governor - sprdemand
model-ZH&K BLITZ (scx35_sp7731geacuccspecAplus_UUI_ts6_m7_dt_zh_k)
Board-sp7731gea
hardware-sc8830
Android version- 4.4.2
api level-19
bootloader-unknown
Build Id-HYST_TS6_M7_BLITZ_V06_2015_05_22
java Vm- dalvik 1.6.0
kernel architecture- armv71
kernel version- 3.10.17
root Access-Yes
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for your BLITZ phone but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!

[Completed] china tablet stuck at android logo

i am a noob in flashing os and my china tablet is stuck on android logo after i tried to swap memory. i cant get my tablet to recovery mod so i was thinking to install a new android i so plz help me i dont even know what all software is required
MY TABLET SPECS
brand technaxx
Product Dimensions 31.8 x 21.6 x 5.6 cm
Model Number TXX3719
Screen Size 8 inches
Processor Brand Rockchip
RAM size 512 MB
Size hard drive 8 GB
Graphics Card -OnBoard Graphic
Additional Product Information
ASIN B0060KDGYQ
and i think my android version is 4.xx

Hi,
Thanks for using XDA assist.
Unfortunately I couldn't find a helpful thread for you. Instead, please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios

[Completed] Help for an impossible overclock thanks !!!

It happened in his hands a Deco77x with Andorid 4.4.2, not to throw it I put it back to life with a custom ROM, a Andorid 5.1.1 porting a Galaxy A3 currently installed. I tried the Lollifox, the CyanogenMod 12.1, I have tried several kernel including the "Franco kernel", adapted as one its appropriate there. I have traveled far and wide. But going to the point, the terminal mounting a MediaTek MT6572 CPU, 2 Cores, ARM Cortex-A7 at 1.00GHz, I can not in several GHz overclock to bring in more 'of 1.00 ... even if the operations are all going cheap end more 'of 1.00 just does not go. Putting the chip no longer 'of the power holders, perhaps limited by the producers themselves in a specific version for this phone, I've found on the website of MediaTek these data, "Dual-core chip (1.2GHz) ARM Cortex-A7 processor" so just do not understand because 'more' of 1.00 can not go there. I arrived to the extreme and I address you. Here I write some data that might help.
Info Deco77x
-CPU MediaTek MT6572 ARM Cortex-A7 at 1.00GHz
-GPU Mali-400 MP
-root KingRoot
-Flashify
-Recovery "Philz Deco recovery"
-Chamelephon 1.0
-no-Frills CPU Control
-Trickster MOD Kernel Settings

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

thanks the answer ... lighthouse 'so

[Completed] Cyanogen or any other rom for Utok 10Q?

Hello, can any one tell me what working version of cyanogen or any other rom can i install on this tablet :
UTOK Hello 10Q
- Quad-Core 1.3 GHz
- MediaTek 8321
Chipset video:Mali400 MP2
10.1 inch

XDA Visitor said:
Hello, can any one tell me what working version of cyanogen or any other rom can i install on this tablet :
UTOK Hello 10Q
- Quad-Core 1.3 GHz
- MediaTek 8321
Chipset video:Mali400 MP2
10.1 inch
Click to expand...
Click to collapse
Hi and welcome to XDA.
Try posting your query in:
> Android Development and Hacking > Android Q&A,Help and Troubleshooting.
You'll have to create an account to post in the main forums.
Good luck