Hello XDA Assist,
Please provide the correct forum link or update the thread so that it can reach to correct audience. I have search some thread before starting but can not find anything related for my device.
I am using a Android HDMI Mini PC stick from last few years and now want to install a custom ROM on it but not sure where to start. I have read couple of forums but the information are so vast that i am not able to grab, what i understand that first basic thing to do is to identify your hardware correctly to find compatible custom ROM and that i did using CPU-Z App then i tried to find compatible ROM but i don't know how to relate the chipset information to find custom ROM and what all are the things i need to check before proceed, So can anyone guide me in below please ?
1. Were i can find the custom ROM like CyanogenMod or similar which can be installed on my Android stick?
2. If i found one then what will be the steps to install it?
3. How take a backup of my firmware/OS so that if anything go wrong then i can restore?
My stick is rooted.
----------------CPU-Z App Summry-----------------------
Brand- leoxsys
Device Manufacturer- Unknown
Model ID- Xoro T1S
Android Version- 4.0.4
Kernel Version- 3.0.8
SoC (Processor) Architecture- ARM (armv7l)
SoC Model- Allwinner A13
SoC Family- 1x ARM Cortex-A8 @960 MHz
Frequency- 1008 MHz*/ Min: 30 MHz - Max: 960 MHz
Main CPU- Cores 1 Cores / 1 Threads
Process- 45 nm
CPUID 41.3.7.C08.2
Revision- R3P2
Features- SWP HALF THUMB FASTMULT VFP EDSP NEON VFPV3
Bogomip-s 1001.88 MIPS
SoC Manufacturer- ARM
SoC Model- Mali-400 MP
OpenGL- Ver. 2.0
RAM- 844 MB (1 GB)
Flash- 503 MB
Thanks
sDas
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Related
I wish some of the xda dev Help me.
I Have a ZH&K BLITZ (PHILIPPINE MADE)
I want to ask them if they can help me to back up my rom and may a port rom for this phone. its becoming a popular phone here in the PH.
Here is the Phone Specs
Architecture-4x ARM Cortex-A7 @ 1.20Ghz
Revision-r0p5
Gpu Vendor- ARM
GPU REnderer-Mali-400 MP
Scaling Governor - sprdemand
model-ZH&K BLITZ (scx35_sp7731geacuccspecAplus_UUI_ts6_m7_dt_zh_k)
Board-sp7731gea
hardware-sc8830
Android version- 4.4.2
api level-19
bootloader-unknown
Build Id-HYST_TS6_M7_BLITZ_V06_2015_05_22
java Vm- dalvik 1.6.0
kernel architecture- armv71
kernel version- 3.10.17
root Access-Yes
PatMigz said:
I wish some of the xda dev Help me.
I Have a ZH&K BLITZ (PHILIPPINE MADE)
I want to ask them if they can help me to back up my rom and may a port rom for this phone. its becoming a popular phone here in the PH.
Here is the Phone Specs
Architecture-4x ARM Cortex-A7 @ 1.20Ghz
Revision-r0p5
Gpu Vendor- ARM
GPU REnderer-Mali-400 MP
Scaling Governor - sprdemand
model-ZH&K BLITZ (scx35_sp7731geacuccspecAplus_UUI_ts6_m7_dt_zh_k)
Board-sp7731gea
hardware-sc8830
Android version- 4.4.2
api level-19
bootloader-unknown
Build Id-HYST_TS6_M7_BLITZ_V06_2015_05_22
java Vm- dalvik 1.6.0
kernel architecture- armv71
kernel version- 3.10.17
root Access-Yes
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for your BLITZ phone but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!
how to install android os in nokia n9, if installed what are the pros & cons? thanks
phone specification
OS MeeGo OS, v1.2 Harmattan
Chipset TI OMAP 3630
CPU 1 GHz Cortex A8
GPU PowerVR SGX530
Internal 16/64 GB, 1 GB RAM
XDA Visitor said:
phone specification
OS MeeGo OS, v1.2 Harmattan
Chipset TI OMAP 3630
CPU 1 GHz Cortex A8
GPU PowerVR SGX530
Internal 16/64 GB, 1 GB RAM
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user, here > http://forum.xda-developers.com/register.php
I'm sorry, but there is not a specific forum for your device yet.
After you have registered, if you go to the following forum and post your question, hopefully one of our experts can help you > http://forum.xda-developers.com/showthread.php?t=2259645
Good luck.
Hello.
Anyone can root accent speed X1?
model : SPEED X1 (msm8916-64)
architecture : 4 x ARM cortex -A53 1.2GHz
adreno (TM) 306 @ 400 MHz
Build ID TBW573112_9941_V0004*
kernel arch aarch 64
and thanks
Hi,
I couldn't find any info about your device on XDA. But you can register on the site and ask here: http://forum.xda-developers.com/android/help. Good luck!
Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Hi Gimly161
Thank you for using XDA Assist
I was able to find only one XDA thread regarding your device:
NUU Mobile Z8 Unboxing & First Impressions - Budget Phone - Great Specs (Joshua Bane)
CyanogemMod as well as every ROM, Custom Recoveries and Root scripts are developed regarding each targeted device. It would be difficult (dangerous indeed) to use other devices development onto your device.
So, as we do not have an specific forum dedicated for your device yet, our experts at the below forum may be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
Gimly161 said:
Hello I'm new to this forum and I'd like to ask some questions.
I have one of the most unknown phone on the market I guess, it's a Nuu Z8.
I believe there isn't a single thread about the Nuu Z8. Anyway to my point I was looking for a custom ROM (like CyanogenMod) but of course it doesn't support my phone.
Then I started to ask myself and now you guys, could it be that I can use a CyanogenMod ROM that isn't meant to be for my phone but possibly could work because it is made for the same architecture and stuff? (I found a few ROMS made for my architecture)
further specs:
cpu:
- MediaTek MT6752
- ARM Cortex-A53
- 64bit
- ARMv8-A
- 1700MHz
- 8 cores
GPU:
- ARM Mali-T760 MP2
- 2 cores
- 700MHz
RAM:
- 2GB of LPDDR3 800MHz single channel RAM
storage:
-32GB
DUAL sim and sd card
5.5" screen with 1080x1920 pixels
if more specs are needed you have to google:" NUU Moblie Z8 - Specifications devicespecifications . com
Edit: There also isn't a cwm or twrp custom recovery menu made for my phone but I can flash ROMS and ZIP/OTA files using flashfire.
I believe this also means that when I brick my phone I can't install the default ROM because I don't have an custom recovery menu.
Click to expand...
Click to collapse
It happened in his hands a Deco77x with Andorid 4.4.2, not to throw it I put it back to life with a custom ROM, a Andorid 5.1.1 porting a Galaxy A3 currently installed. I tried the Lollifox, the CyanogenMod 12.1, I have tried several kernel including the "Franco kernel", adapted as one its appropriate there. I have traveled far and wide. But going to the point, the terminal mounting a MediaTek MT6572 CPU, 2 Cores, ARM Cortex-A7 at 1.00GHz, I can not in several GHz overclock to bring in more 'of 1.00 ... even if the operations are all going cheap end more 'of 1.00 just does not go. Putting the chip no longer 'of the power holders, perhaps limited by the producers themselves in a specific version for this phone, I've found on the website of MediaTek these data, "Dual-core chip (1.2GHz) ARM Cortex-A7 processor" so just do not understand because 'more' of 1.00 can not go there. I arrived to the extreme and I address you. Here I write some data that might help.
Info Deco77x
-CPU MediaTek MT6572 ARM Cortex-A7 at 1.00GHz
-GPU Mali-400 MP
-root KingRoot
-Flashify
-Recovery "Philz Deco recovery"
-Chamelephon 1.0
-no-Frills CPU Control
-Trickster MOD Kernel Settings
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
thanks the answer ... lighthouse 'so