Related
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
The things i tried so far:
1- Reflash with the latest stock firmware. Ticking the NAND erase all and repartition it with pit file also didn't work.
2- Samsung Smart Switch and Kies3. Flash completed but no effect.
3- Flashing any recovery files returns with "Custom binary(recovery) Blocked by R/L".
4- Sent it to my nearest Samsung service centre, they did try to repair it but only to be told that my S6 need a new motherboard the next day, which is out of my budget limit. But i am still hoping to find some other way to fix it, i believe this is just a "soft-brick" not a hard brick device.
Ideas guys? thanks.
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
thereassaad said:
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
Click to expand...
Click to collapse
Already tried that, still no luck..
mrkage said:
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
Ideas guys? thanks.
Click to expand...
Click to collapse
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
mrkage said:
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
Click to expand...
Click to collapse
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
mrkage said:
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
Click to expand...
Click to collapse
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Only did for my specific model number and carrier
mrkage said:
Only did for my specific model number and carrier
Click to expand...
Click to collapse
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
mrkage said:
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
Click to expand...
Click to collapse
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Didn't try that... but nevermind. I accidentally damaged my screen while trying to dissasemble it last night, a very stupid mistake from me.
Thank you for trying to help me mate. Forum mods can close this thread now. Thanks all.
problem
i have too but with A/L
im sorry if this is in the wrong section but ,ok so i bought an open box galaxy s6 from becetech online and it would not let me update the firmware past 5.1.1 which made me a bit suss, downloaded root checker app and it came too me rooted. apart from not being able to update the firmware past 5.1.1 as far as im aware the phone has no issues and works perfectly fine. i downloaded the *samsung* phone info app, in general under manufacturer it says Samsung/verizon so im assuming that is part of the reason they rooted the phone as it needed to be unlocked from verizon to be refurbished? so what i want to know is how do i find out exactly what becetech have done to the phone and is there an easy way for me to update the firmware to nougat or at least marshmallow without stuffing the phone, like i said the phones running fine its just really bugging me not being to update. obviously im not able to work it out myself but i can follow instructions so any help from someone would be greatly appreciated so thank you in advance.
Benno81 said:
im sorry if this is in the wrong section but ,ok so i bought an open box galaxy s6 from becetech online and it would not let me update the firmware past 5.1.1 which made me a bit suss, downloaded root checker app and it came too me rooted. apart from not being able to update the firmware past 5.1.1 as far as im aware the phone has no issues and works perfectly fine. i downloaded the *samsung* phone info app, in general under manufacturer it says Samsung/verizon so im assuming that is part of the reason they rooted the phone as it needed to be unlocked from verizon to be refurbished? so what i want to know is how do i find out exactly what becetech have done to the phone and is there an easy way for me to update the firmware to nougat or at least marshmallow without stuffing the phone, like i said the phones running fine its just really bugging me not being to update. obviously im not able to work it out myself but i can follow instructions so any help from someone would be greatly appreciated so thank you in advance.
Click to expand...
Click to collapse
Could someone with a bit more knowledge please tell me if the reason I can't update the firmware is because the firmware csc is TGY when I'm in Australia or just because it's rooted or what? I'm getting no answers from the company who I bought it off
Benno81 said:
Could someone with a bit more knowledge please tell me if the reason I can't update the firmware is because the firmware csc is TGY when I'm in Australia or just because it's rooted or what? I'm getting no answers from the company who I bought it off
Click to expand...
Click to collapse
Are you trying to update via the phone update feature? If so this won't work as rooting disabled the ability Update using ota
First I tried OTA then downloaded samsung smart switch and gave that a go both no good. What I want to know is, if they had to root the phone to refurbish it will it brick it if I try to update? Won't it reset all the company I bought it off has done to it to refurbish it? Which I'm guessing is quite a process as when I look at the open source licenses there's a long list of files that have been changed. It just sucks that it's locked to a three year old version of the firmware that I'm worried apps will start to stop supporting in the near future? Apart from that I can not fault the phone there's been no problems, maybe I'm asking a bit much for a $400 phone?
Benno81 said:
First I tried OTA then downloaded samsung smart switch and gave that a go both no good. What I want to know is, if they had to root the phone to refurbish it will it brick it if I try to update? Won't it reset all the company I bought it off has done to it to refurbish it? Which I'm guessing is quite a process as when I look at the open source licenses there's a long list of files that have been changed. It just sucks that it's locked to a three year old version of the firmware that I'm worried apps will start to stop supporting in the near future? Apart from that I can not fault the phone there's been no problems, maybe I'm asking a bit much for a $400 phone?
Click to expand...
Click to collapse
From what I can tell you have a g920v variant if the phone Shows Verizon but the sure fire way to know what variant you have is turn the phone off once off hold home-power-volume down, this will take you to download mode but should tell you your variant. You don't need to root a phone to refurbish It, you can flash Stock firmwares via Odin. I really don't know why they would have Rooted It tbh, you'd need to contact them, but I know for sure you can manually download the latest Verizon firmware and the phone should work. Maybe they Rooted it as part of making it network unlocked, o really can't say
Ok I tried that and a bright blue screen came up warning about custom OS then press up volume for download and down volume for reset? I just pressed down as there was no other info on the screen but it does say it's a sm-g920v in the settings as well as the root checker app. Another thing was I did ring samsung support gave them the serial number and IMEI and they said an authorized modification had been done on the phone but could offer no other support as it wasn't an Australian phone. I'll keep trying to get some info out of the company I bought it off and try to sort it out thanks for your help :good:
Hello, My Sprint S7 was frp locked and I wanted to sim unlock it. I downloaded odin v3.12. ADB does not see the phone. I flashed with a firmware file. It is now in a boot loop where it says system install. At one time it came up and said it failed and to use Smart Switch emergency repair. I downloaded smart switch and it says unsupported device. I can put the phone in download mode. I have searched and gotten firmware. Everything I try fails in odin. Is it bricked for good or is there a way to fix it? Are there reputable companies that can unbrick it for a small fee? This site is tough to navigate and everytime I search it seems I come up with another place. One had a link to download firmware to flash and fix bricked phone but when I tried to open it my antivirus said it was full of adware. The phone is SM-G930P running 7.0. I was going to flash to a universal one or at&t. I can try odin and screenshot the results if I need to. I am willing to try about anything. Thanks in advance for any help. I have another one (they came as a pair) it is not frp locked but is simlocked. Not blacklistedd but it does show an unpaid balance. I cannot get a hold of the person I bought them from. I know what to check now though. Lesson learned.
KeithSherley said:
Hello, My Sprint S7 was frp locked and I wanted to sim unlock it. I downloaded odin v3.12. ADB does not see the phone. I flashed with a firmware file. It is now in a boot loop where it says system install. At one time it came up and said it failed and to use Smart Switch emergency repair. I downloaded smart switch and it says unsupported device. I can put the phone in download mode. I have searched and gotten firmware. Everything I try fails in odin. Is it bricked for good or is there a way to fix it? Are there reputable companies that can unbrick it for a small fee? This site is tough to navigate and everytime I search it seems I come up with another place. One had a link to download firmware to flash and fix bricked phone but when I tried to open it my antivirus said it was full of adware. The phone is SM-G930P running 7.0. I was going to flash to a universal one or at&t. I can try odin and screenshot the results if I need to. I am willing to try about anything. Thanks in advance for any help. I have another one (they came as a pair) it is not frp locked but is simlocked. Not blacklistedd but it does show an unpaid balance. I cannot get a hold of the person I bought them from. I know what to check now though. Lesson learned.
Click to expand...
Click to collapse
If its stopping on sboot.bin install samfirm and download latest firmware then flash again
kpwnApps said:
If its stopping on sboot.bin install samfirm and download latest firmware then flash again
Click to expand...
Click to collapse
Hey. Thanks for responding. I downloaded samfirm. It says device not supported. I have been searching around to make sure I try to flash the correct software. At this point I am not as concerned about sim unlocking as just getting it to boot up again. Is it possible I tried to go further back and an older bootloader bricked it? Thanks
KeithSherley said:
Hey. Thanks for responding. I downloaded samfirm. It says device not supported. I have been searching around to make sure I try to flash the correct software. At this point I am not as concerned about sim unlocking as just getting it to boot up again. Is it possible I tried to go further back and an older bootloader bricked it? Thanks
Click to expand...
Click to collapse
Install firmware from updato.com and try again
kpwnApps said:
Install firmware from updato.com and try again
Click to expand...
Click to collapse
Hey. I have been trying to download from updato. I guess the free download is not very good. It says 2 days and keeps disconnecting. Fianlly aborted when about halfway through. I have found another site to give a shot. Maybe I just did not have the correct file the first time. Thanks for checking in. I appreciate any input or ideas.
Btw, the other s7 I have is working. It is sim locked from Sprint. It is not listed as stolen or lost. To flash to Sprint would I just use the latest download? Thanks
KeithSherley said:
Hey. I have been trying to download from updato. I guess the free download is not very good. It says 2 days and keeps disconnecting. Fianlly aborted when about halfway through. I have found another site to give a shot. Maybe I just did not have the correct file the first time. Thanks for checking in. I appreciate any input or ideas.
Btw, the other s7 I have is working. It is sim locked from Sprint. It is not listed as stolen or lost. To flash to Sprint would I just use the latest download? Thanks
Click to expand...
Click to collapse
The saga continues. I did download stock firmware. It still failed when trying to flash with Odin. I can get it to load the recovery menu and the download menu now. Before the recovery menu would not load. on the log the last two things say
xbl.elf
FAIL! (Auth)
I tried Kies and Switch, neither support the device. I am currently downloading a stock rom from SamFirm, once I figured out the exact way to type on model and region code. I will try that in a little while and search for odin auth fials for the s7.
Thanks again for the help. I have learned quite a bit and it is fascinating. Any thoughts on the fail would be greatly appreciated. I hope after I get the stock rom back I can find the correct process to unlock it.
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
I had the some problem while playing with my handset I switched off OEM unlock for some reason under developer option..
Next time i reset my handset it stuck on that warning
You need to download combination file, flash it with odin, then unlock developer mode, toggle OEM unlock, than flash back your current firmware, or if you have full twrp back up restore it
JayMor81 said:
Hi all,
I'm having a nightmare of a time with my Galaxy S7... For some unknown reason I decided to root my phone about 2 months ago using CF Auto Root.. worked great.. This morning, was having bad lag issues, so I restarted the phone.. as soon as the Samsung logo came up, I got a red message at the top of the screen saying "Custom Binary locked by FRP".. kind of freaked out and booted the phone into Recovery mode.. wiped Cache and wiped phone (to go back to factory setting I guess).. restarted... since then, I had no boot.. it did loop for a while as I was trying to charge the phone.. but that's it.
Now, the only way the phone will power on is if I plug it into my computer in Download Mode. I am trying to flash the ROM, custom or stock, but Odin fails almost as soon as it starts the sboot.bin and the phone screen shows "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY: 1".. Also, When I try to power on the phone, it HAS to be plugged in to my computer or charger cable and it just loops with a message at the top of the screen.
I can't do anything with this phone and cant find any solutions online... please help! :crying:
PM me for images of all screens please
Click to expand...
Click to collapse
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Dammit.. I tried to put as much detail as possible in there lol.. obviously I forgot some.. My mistake the Galaxy s7 that I am using is a Rogers Mobile (Canada) SM-G930W8. As for not signing out before modification, omfg, that makes perfect sense.. didn't even think of doing that before rooting.. I appreciate the help!! I will give this a go and see what outcome I get.. Thanks!
[/COLOR]That was nice of you to respond so helpfully, despite you having seen the scenario posted over and over.
cooltt said:
This problem appears on the forum over and over. Its a direct result of not understanding what type of S7 you have and what you need to do before modification.
The error you have in Odin means the firmware you are trying to flash is older than the bootloader file on your device. You can never downgrade a bootloader only upgrade.
In your case you need to flash a firmware version 6 or above for your device. So if you have a branded T Mobile for example you will need to download and flash T Mobile firmware version 6 or above. The firmware must also be for your region where you live.
The FRP lock is because you didn't sign out of, or remove the Google account on the device before modification. Its a security feature. It will still appear after you've flashed firmware but as long as you know the email and password the phone will start fine.
Click to expand...
Click to collapse
Can't make or receive calls
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Cesilina said:
Please I need help my I rooted my S7 (flat) flashed the original OS with odin Installed Twrp flashed Andriod 9 and since then I can't make or receive calls wifi seems fine. Someone please come to my rescue:crying:
Click to expand...
Click to collapse
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
cooltt said:
The S7 didn't receive Android 9 so the ROM is a custom one. Any issues with custom ROM's should be asked on the ROM thread itself where you got the ROM from. It's quite normal for custom ROM'S to have bugs.
You can try flashing the ROM (Android 9 Pie) again to see if it works. If not there are several different A9 ROM's to choose from.
Click to expand...
Click to collapse
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Cesilina said:
Thank you for reply. I have tried atleast 4 different custom ROMs but to avail
Click to expand...
Click to collapse
Do you still have an imei number listed in settings?
Can't make or receive calls
cooltt said:
Do you still have an imei number listed in settings?
Click to expand...
Click to collapse
Yes please I still have an IMEI number
Hi,
I have another Verizon LG Velvet. Android 11. Software version-G900VM20d
This phone has (Service Disabled-Radio Off-Airplane Mode On) Cannot get these cleared. I was able to downgrade the phone down to Android 10 via LGUP, but that didn't help.
What I would like to do/know-Is there a modem for this variant that I could flash over to get the radio back on? I want to experiment with this issue. I know the easiest way to fix this is to either replace the logic board or get another phone. I want to try the flash instead, if it is possible, or root it to get to the menu and see what is up with the radio being off and get it back on. Thanks.
prahsper said:
Hi,
I have another Verizon LG Velvet. Android 11. Software version-G900VM20d
This phone has (Service Disabled-Radio Off-Airplane Mode On) Cannot get these cleared. I was able to downgrade the phone down to Android 10 via LGUP, but that didn't help.
What I would like to do/know-Is there a modem for this variant that I could flash over to get the radio back on? I want to experiment with this issue. I know the easiest way to fix this is to either replace the logic board or get another phone. I want to try the flash instead, if it is possible, or root it to get to the menu and see what is up with the radio being off and get it back on. Thanks.
Click to expand...
Click to collapse
someone please???