Dear team my s7562 have new fault comes when I making call incoming-outgoing sound ok but after 13-14 second it's muted or no sound in incoming or outgoing and same happened while using handsfree. But the call continues.. And after 3-5 seconds of the MUTE, again the call restores. Original OS was also done 2 times so far. Still the problem persists
Anybody solutions please help with a solution.,
http://forum.xda-developers.com/showthread.php?t=863209
Thread closed
Related
Hi,
Last night I started having a problem with the sound :
- while calling I didn't hear any ring tone; but destination phone was ringing
- if other end picked up, neither could hear the other's voice.
- if other party's calling me, my phone rings (?!); when I pick-up, again, neither can hear a thing.
- in the 'sounds' menu, while clicking the play 'icon' no sound.
(volumes are configured to max)
When I tried to soft reset the device hanged on the splash screen, leaving me with no other alternative than hard-resetting :-(
Even after hard-reset, the problem persists.
I'd appreciate any help/advise
Regards & thanks for this forum.
Al
try connecting the headset some people have problems with
the connector getting stuck and it believing that the headset is connected all the time
I've had the same problem...
A phone call ( with a normal line ) to T-Mobile was enough.
They picked up my MDA and swapt it.
Tried phone calls to several providers .... no result.
When I upgraded the firmware, it worked for a couple of days, but the minute I touched the volume/screenlet, it the sound got blocked again ... even hardware reset didn't solve ...
i've had the Touch Pro for a little over a week and i absolutely LOVE IT.
the only problem i have is that every now and then, all sound output dies in the device
the phone wont ring anymore, it would only vibrate.. and if you try to raise or lower the volume, no sound comes out at all either.
the only way out is to reset the phone which i'm doing now on a daily basis hoping to avoid missing calls and messages when the phone only vibrates while it's away from me.
anyone have the same problem and/or a solution?
ROM: 1.90.456.3 WWE
ROM Date: 08/20/08
Radio: 1.02.25.19
Protocol: 52.33.25.17U
Hello AntiProxy,
Unfortunately, welcome to the club...
You are the 3rd person I've counted that has that problem. A post is already active on it:
http://forum.xda-developers.com/showthread.php?t=422322
What is weird is that you don't have the same ROM as Zillator and I (we have the same ROM).
I'm really starting to think it is an hardware problem then and that we'll have to send the phones back...
Please check the other post.
Hello Flippy.
yeah i noticed your thread earlier but thought our general symptoms are different.
in my case and when the problem happens, the phone no longer rings, no more message notifications, etc.
and it doesn't happen while the phone is ringing.. it just seems to die off randomly.
like the other day a friend came over and asked if i got his message.. i checked and found 3 messages.. no missed calls.
figured the sound was low, so i hit volume up and increased it to the max, but still no sound was coming out..
i asked him to call.. the phone vibrated, no ringtone.. i answered.. he could hear me, but i couldn't hear him.
now the only good news i might be able to give you, is that i've had this same issue back in the day with my blueangel (i-mate pda2k) and it got solved with a new radio rom.
don't ask me what's this got to do with the radio.. it worked back then.
Same here m8!
When my phone does like that I usually realize when calling. But when it does happen all my sounds are ded as well (volume up/down you don't hear sound, it vibrates without ringing and all other sounds are dead).
We have exactly the same symptoms!
i have this prob too. is worse when i use my bluetooth headset. the, it crashes while in the middle of a call.... how do we get this fixed? called HTC service centre and they suggested i upgrade ROM. read in other places that htc changed the mainboard...
any ideas??
PS, i have the exact same rom, radio and proto as @antiproxy
Hi, recently I flashed Onecosmic's ICS 4.0.3 RC3 on my galaxy s....now the problem is that whenever I receive a call the MIC DOES NOT WORK !!
While when i make a call it works perfectly.....its pissing me off....as i dont want to leave ICS because of this silly problem.....nyone with a solution????
(P.S: I have tried reflashing other ics roms...like that of teamhacksung...but the problem exists...its only solved when i get down to gingerbread.)
Androlover said:
Hi, recently I flashed Onecosmic's ICS 4.0.3 RC3 on my galaxy s....now the problem is that whenever I receive a call the MIC DOES NOT WORK !!
While when i make a call it works perfectly.....its pissing me off....as i dont want to leave ICS because of this silly problem.....nyone with a solution????
(P.S: I have tried reflashing other ics roms...like that of teamhacksung...but the problem exists...its only solved when i get down to gingerbread.)
Click to expand...
Click to collapse
I also have this annoying problem that stops the basic function of the mobile phone. I also searched the net but did not find any fix for it also tried several ICS builds/version available on internet but all are having this problem of poort MIC audio while incoming call, perfectly working when doing outgoing call.
I discovered that just after receiving the call if you taggle the mute/unmute button then it works perfectly no matter how long your call can go - i check this on more than 30 min call.
Hope developer should rectify this issue as soon as possible.
dk147in said:
I also have this annoying problem that stops the basic function of the mobile phone. I also searched the net but did not find any fix for it also tried several ICS builds/version available on internet but all are having this problem of poort MIC audio while incoming call, perfectly working when doing outgoing call.
I discovered that just after receiving the call if you taggle the mute/unmute button then it works perfectly no matter how long your call can go - i check this on more than 30 min call.
Hope developer should rectify this issue as soon as possible.
Click to expand...
Click to collapse
need this sorting asap paranoid is the best rom i have used so far with this bug the onjly thing making this just short of awsome
Hi all,
As the title suggests, everytime when I am making a call on blueooth (car), the ring\dial tone will stay silent for the rest of the process until the call is connected. I have also looked into the settings menu under sounds but with no help, tried deleting and repairing the devices and no luck. Is anybody else experiencing this problem and better yet, found a solution for this?
My friend is also experiencing same issue and we are using Ford car Bluetooth connection.
Also happens on my Nexus 4 newly upgraded to lollopop.
Fine for incoming calls but silent for outgoing. Switching to speakerphone on the device then back to bluetooth seems to manually make it route the call through the bluetooth handsfree but is obviously very unsafe.
Suprised more people havent mentioned this issue!
Managed to find a fix? 5.0.1 doesnt sort it sadly.
Finally I see someone acknowledging the issue.
Nope, could not find any fix and surprisingly no one is mentioning this issue anywhere. Experts in this forum should help us with some solution.
Got the workaround
MTIH1992 said:
Also happens on my Nexus 4 newly upgraded to lollopop.
Fine for incoming calls but silent for outgoing. Switching to speakerphone on the device then back to bluetooth seems to manually make it route the call through the bluetooth handsfree but is obviously very unsafe.
Suprised more people havent mentioned this issue!
Managed to find a fix? 5.0.1 doesnt sort it sadly.
Click to expand...
Click to collapse
You can put the source of the audio system to Bluetooth audio and you should be able to hear the dialtone. Afcoure your call end buttons on audio system will not work while on dialtone. After the phone is picked-up the buttons start working
I have been facing this issue from the time I installed CM12 or any CM12 based ROM. Pretty surprised that there are two or three mentions of this problem in some of the threads but non has replied. Don't know whether its a bug or some intermittent issue. Problem is When I am on a call and a new call comes in(call waiting), my call goes on HOLD automatically and if I reject the new call, my already active call didn't work. I have to disconnect the call and call the person again. This problem is very annoying.
Can anyone please help.
mannu_in said:
I have been facing this issue from the time I installed CM12 or any CM12 based ROM. Pretty surprised that there are two or three mentions of this problem in some of the threads but non has replied. Don't know whether its a bug or some intermittent issue. Problem is When I am on a call and a new call comes in(call waiting), my call goes on HOLD automatically and if I reject the new call, my already active call didn't work. I have to disconnect the call and call the person again. This problem is very annoying.
Can anyone please help.
Click to expand...
Click to collapse
I'm having the exact same problem and have been searching for a solution but no luck. Because of this reason I've been having to go back to KitKat. Does anyone have a solution for this? I have the lollipop one plus modem that I flash every time I flash any lollipop rom
That's what happens when you volunteer to test alpha firmware.
An easy workaround is disable call waiting bc it sucks anyway. Nobody likes to be put on hold. You can have interruption-free calling and extra incoming callers get an old-fashioned busy tone.
Did anyone filed bug for this..
tollboy said:
Did anyone filed bug for this..
Click to expand...
Click to collapse
No I just went back to kit kat.
same problem. its really problematic.even the people are ia m in call with are getting irritated as they are being pushed to hold. some one from cyanogen should address this
mannu_in said:
I have been facing this issue from the time I installed CM12 or any CM12 based ROM. Pretty surprised that there are two or three mentions of this problem in some of the threads but non has replied. Don't know whether its a bug or some intermittent issue. Problem is When I am on a call and a new call comes in(call waiting), my call goes on HOLD automatically and if I reject the new call, my already active call didn't work. I have to disconnect the call and call the person again. This problem is very annoying.
Can anyone please help.
Click to expand...
Click to collapse
Hello...I am yureka plus user....I have installed Cm12 manually.....I have resolved many issue.....but still facing is conference call....as it shows"can't switch calls" and goes back to current call......neither it hold the call.....shows same error...please help.....big fan of cyanogen.....as able to use full features of my device...