Not sure how many would read such a long post for a question, but here goes...
Any help is appreciated!!
1. Problem
In short, I plugged in my Nexus 5 to my laptop in MTP mode, it does not show up in "My Computer".
I just wanted to transfer files to my phone via USB, not even using ADB yet.
I have yet to solve the problem after googling around for a bit.
Relevant XDA threads that I remember reading are this, this, this, this and this.
I have tried numerous combinations of (un)plugging my phone / (un)installing drivers / rebooting my laptop and phone / switching usb ports / turning USB debugging on and off / connect in PTP mode / ...
As a workaround, I am now transferring files using the AirDroid app, which is really convenient with acceptable speed.
Still, it would be nice to know why the problem occurred and see if others have similar problem.
Below I will describe the devices I have on hand and more details on the failures I have encountered will follow.
2. My Devices
A. an old Galaxy Note
B. the new Nexus 5 with the stock micro USB cord
C. new laptop
- 64-bit Windows 8 Pro (not upgraded to 8.1 yet)
- only USB 3.0 ports
D. old laptop
- 32-bit Windows XP Home
- only USB 2.0 ports
3. Details
Scenario A. Nexus 5 not showing up in "My Computer"
Naturally, the first thing I tried is to simply plug my Nexus 5 in to my new laptop. I was used to Android devices working just like that!
However, my Nexus 5 does not show up in "My Computer" after a loooong wait.
On a closer look, my Nexus 5 (only) appears in the "Device Manager" under "Portable Devices" as "MTP USB Device".
It shows my device to be "working properly". However, I cannot uninstall/disable it when my phone is plugged in (normal?)
Frustrated, I decided to unplug my phone. I have the option to "Unplug Nexus 5" under "Safely Remove Hardware", but the operation always times out, so I simply unplugged it.
Then I tried with my Note using the same cable. It works flawlessly either in MTP mode or Mass Storage mode.
Scenario B. Nexus 5 shows up, but is really sloooooooooooooow
At some point, I turned on USB debugging.
With USB debugging on, my phone appears under "Portable Devices" as "Nexus 5" (and in some other places according to what drivers I have installed).
I was quite pleased for a few seconds as my Nexus 5 now shows up in "My Computer"!
However, it took a few minutes to list the folders I have under my phone's internal storage.
Attempting to copy a 12MB file to it gives an estimated time of over 2 hours.
Scenario C. Success?
After tinkering with it for some time to no avail, I was beginning to worry if I have gotten a defective hardware.
Then I remembered I had an old laptop stashed somewhere, so I tried connecting my Nexus 5 to that.
And... voila! It works without a hitch (MTP mode, USB debugging off).
A maybe useful note is that I have used both the old and new laptops to transfer files to my Note before.
4. Possible causes
While many seems to have solved the issue by simply unplugging and letting Windows reinstall the drivers, I have no such luck.
I sincerely hope that it is not due to any hardware defects since
a) my Note can talk to my new laptop through the same micro USB with no problems, and
b) my Nexus 5 can talk to my old laptop.
I feel that this is a driver-related issue but I am not sure.
Is it possible that there are compatibility issues with using USB 3.0 port (which should be backward compatible...) or a 64-bit Win 8 Pro?
Any help is appreciated!
It is so strange..
I just bought a USB 2.0 hub and connected my phone to my new laptop through it.
Guess what... it works perfectly!
Apparently my problem was that my new laptop only had USB 3.0 ports for me to test on?
Doesn't make sense... thought 3.0 is backward compatible and my old Note works on it!
Maybe I'm missing something but I'm happy it is solved for me now
This solution worked for me. Go to http://forum.xda-developers.com/showthread.php?t=2512549 and see post #5. Be sure to thank n7of9 for the link and WugFresh for his toolkit solution. Enjoy.
Hey,
I basically seem to have the same problem as you do.
My laptop also only has USB 3.0 ports and Windows 8.1 Pro 64-bit installed.
The Nexus 5 doesn't get installed, in MTP mode it is just shown with the yellow exclamation mark in Device Manager. Downloading different USB drivers including Google's and trying to manually install it doesn't work at all. I specifically checked that all older similar drivers are gone, so I doubt that older Android devices could be interfering.
On the other hand, as you noted, using an older computer with USB 2.0 works perfectly, I had the same result.
To be honest, I'm not much of a developer or Android tinkerer, so I'm not really making any progreess... In the end, I think I will follow your example and test it with a USB 2.0 adapter.
Did you manage to get it to work without this workaround?
Kind regards! :fingers-crossed:
I'm using Linux Mint. Just plug the Nexus in. It shows up as a folder. No hassle
Sent from my Nexus 5
SabinSnorlax said:
Hey,
I basically seem to have the same problem as you do.
My laptop also only has USB 3.0 ports and Windows 8.1 Pro 64-bit installed.
The Nexus 5 doesn't get installed, in MTP mode it is just shown with the yellow exclamation mark in Device Manager. Downloading different USB drivers including Google's and trying to manually install it doesn't work at all. I specifically checked that all older similar drivers are gone, so I doubt that older Android devices could be interfering.
On the other hand, as you noted, using an older computer with USB 2.0 works perfectly, I had the same result.
To be honest, I'm not much of a developer or Android tinkerer, so I'm not really making any progreess... In the end, I think I will follow your example and test it with a USB 2.0 adapter.
Did you manage to get it to work without this workaround?
Kind regards! :fingers-crossed:
Click to expand...
Click to collapse
I had a lot of issues with my S3 and my work computer (windows XP SP3) and it was because I had half installed some USB driver that windows tried installing.
I fixed the problem in device manager by manually uninstalling EVERY SINGLE USB DEVICE attached to the computer while I had my phone plugged in.
Word of caution: You'll probably uninstall your mouse/keyboard doing this.
Once everything was uninstalled I reinstalled the Samsung drivers and it worked fine.
The same computer only required me to install the Google drivers for my N5. If I enable USB debugging, I all of a sudden can't install MTP drivers, but USB debugging disabled works fine.
USB & MTP mode
I have the same problem with my Nexus 5. The only workaround to transfer files to my phone from a computer via USB cable is to enable USB debuging, set the phone to PTP mode instead of MTP and then it shows in My Computer as a camera. I can only access the DCIM and Pictures folders but for now I have to settle for this...I copy all the files I need to let's say Pictures and then using a file explorer (on the phone) I cut and paste them to the folders I wish...e.g. movies to Movies, music to Music and so on...
I had same problem. Developer Mode...USB Debugging ON worked.
I have this problem too, but I got it to work using a galaxy s3 cable. for some reasons the cable that came with N5 did not work.
Its usually just missing drivers.. You can get them straight from Google or a toolkit as mentioned! (P.s you need to download a little applet like thing from Google if you want to hook up your Mac to your n5)
See andoid.com/filetransfer for the drivers.
This worked for me when all else failed: http://forum.xda-developers.com/showpost.php?p=35854664&postcount=7
Hope that helps!
The problem I am having now connecting is that my phone got wet recently. I dried it immediately and used dessicant to withrow the water and now it works (sort of). Now when I plug my phone into my pc, the usb debugging icon doesn't even show up.
I tried connecting to both my work pc and home laptop and they both say the same thing, that the usb device has malfunstioned and that windows doesn't recognize it.
Is it time for a new phone?
islandboy_2000 said:
The problem I am having now connecting is that my phone got wet recently. I dried it immediately and used dessicant to withrow the water and now it works (sort of). Now when I plug my phone into my pc, the usb debugging icon doesn't even show up.
I tried connecting to both my work pc and home laptop and they both say the same thing, that the usb device has malfunstioned and that windows doesn't recognize it.
Is it time for a new phone?
Click to expand...
Click to collapse
Sounds like the usb is shorting. How long did you let it dry. Give it more time and try it again.
jd1639 said:
Sounds like the usb is shorting. How long did you let it dry. Give it more time and try it again.
Click to expand...
Click to collapse
Yeah maybe thats what happened. It's been drying now for about a week. The screen was the major problem at first but has since dried there mostly.
Hopefully it will come back. Would suck to have to buy a new phone because of that.
Thanks. :good:
MTP connecting problem solved
Going back to the subject of the thread: I am pretty sure that ADB drivers and SDK (I am confident that a lot of nexus users have their devices rooted and that means they must have the above installed) is what is causing some sort of conflict when trying to connect the Nexus 5 as MTP. After I reinstalled the windows (W8) on my computer and connected my Nexus 5 it took @1-2 minutes to auto install the drivers and then worked fine...I have no ideea what happens if I install ADB and SDK again...
ASepi said:
Going back to the subject of the thread: I am pretty sure that ADB drivers and SDK (I am confident that a lot of nexus users have their devices rooted and that means they must have the above installed) is what is causing some sort of conflict when trying to connect the Nexus 5 as MTP. After I reinstalled the windows (W8) on my computer and connected my Nexus 5 it took @1-2 minutes to auto install the drivers and then worked fine...I have no ideea what happens if I install ADB and SDK again...
Click to expand...
Click to collapse
If you tell the SDK not to install the drivers it'll be fine
The simplest and shortest way to connect google nexus5 with PC as MTP(Media device)
When I plugged it, there wasn't any yellow exclamation mark within Device Manager. So for me, the drivers were OK. But the device was not listed within my Eclipse DDMS. After a little bit of searching, it was just an option to change in the device settings. By default, the Nexus 5 USB computer connection is in MTP mode (Media Device).
What you have to do is:
Unplug the device from the computer
Go to Settings -> Storage.
In the ActionBar, click the option menu and choose "USB computer connection".
Then select Media device(MTP) or Camera(PTP) based on your requirement...
Plug the device and you should have a popup on the device allowing you to accept the computer's incoming connection..
I hope this will help!
njoy
Resolved. nexus 5 PC Connectivity
hackdisk said:
Not sure how many would read such a long post for a question, but here goes...
Any help is appreciated!!
1. Problem
In short, I plugged in my Nexus 5 to my laptop in MTP mode, it does not show up in "My Computer".
I just wanted to transfer files to my phone via USB, not even using ADB yet.
I have yet to solve the problem after googling around for a bit.
Relevant XDA threads that I remember reading are this, this, this, this and this.
I have tried numerous combinations of (un)plugging my phone / (un)installing drivers / rebooting my laptop and phone / switching usb ports / turning USB debugging on and off / connect in PTP mode / ...
As a workaround, I am now transferring files using the AirDroid app, which is really convenient with acceptable speed.
Still, it would be nice to know why the problem occurred and see if others have similar problem.
Below I will describe the devices I have on hand and more details on the failures I have encountered will follow.
2. My Devices
A. an old Galaxy Note
B. the new Nexus 5 with the stock micro USB cord
C. new laptop
- 64-bit Windows 8 Pro (not upgraded to 8.1 yet)
- only USB 3.0 ports
D. old laptop
- 32-bit Windows XP Home
- only USB 2.0 ports
3. Details
Scenario A. Nexus 5 not showing up in "My Computer"
Naturally, the first thing I tried is to simply plug my Nexus 5 in to my new laptop. I was used to Android devices working just like that!
However, my Nexus 5 does not show up in "My Computer" after a loooong wait.
On a closer look, my Nexus 5 (only) appears in the "Device Manager" under "Portable Devices" as "MTP USB Device".
It shows my device to be "working properly". However, I cannot uninstall/disable it when my phone is plugged in (normal?)
Frustrated, I decided to unplug my phone. I have the option to "Unplug Nexus 5" under "Safely Remove Hardware", but the operation always times out, so I simply unplugged it.
Then I tried with my Note using the same cable. It works flawlessly either in MTP mode or Mass Storage mode.
Scenario B. Nexus 5 shows up, but is really sloooooooooooooow
At some point, I turned on USB debugging.
With USB debugging on, my phone appears under "Portable Devices" as "Nexus 5" (and in some other places according to what drivers I have installed).
I was quite pleased for a few seconds as my Nexus 5 now shows up in "My Computer"!
However, it took a few minutes to list the folders I have under my phone's internal storage.
Attempting to copy a 12MB file to it gives an estimated time of over 2 hours.
Scenario C. Success?
After tinkering with it for some time to no avail, I was beginning to worry if I have gotten a defective hardware.
Then I remembered I had an old laptop stashed somewhere, so I tried connecting my Nexus 5 to that.
And... voila! It works without a hitch (MTP mode, USB debugging off).
A maybe useful note is that I have used both the old and new laptops to transfer files to my Note before.
4. Possible causes
While many seems to have solved the issue by simply unplugging and letting Windows reinstall the drivers, I have no such luck.
I sincerely hope that it is not due to any hardware defects since
a) my Note can talk to my new laptop through the same micro USB with no problems, and
b) my Nexus 5 can talk to my old laptop.
I feel that this is a driver-related issue but I am not sure.
Is it possible that there are compatibility issues with using USB 3.0 port (which should be backward compatible...) or a 64-bit Win 8 Pro?
Any help is appreciated!
Click to expand...
Click to collapse
Hello !!!
I faced the same problem with mine...
Couldn't connect my phone with my laptop.
It installs the driver but not displaying the folder in my computer.
I uninstalled the Existing samsung driver in control panel.
Then the issue has been solved,
Or uninstall previous mobile's drivers
Try this!?!
Search for Universal Driver here in XDA. Had the same problem most of you are having. First try and BAM! Works like a champ...
NEXUS 5
Problem solved for me
I have no more issues what-so-ever after I unninstalled ADB & SKD drivers...Windows(8) installed my phone by itself after a restart and it works as it should in MTP mode and PTP mode.
So, a month or so ago I updated my phone to L without a hitch. This morning, I tried to begin moving to M, but I can't get my computer to recognize that the phone is connected to a USB port.
I'm running the latest Win 7 Pro build (current patches), I've tried using every USB port on the box, and I've tried four different cables. The Nexus will charge off the USB, but the PC will not connect to it, so I can't perform any of the flashing commands. Dev options are set on the phone, ofc.
Any idea what the problem might be? I've had this same computer since the phone came out and, as I mentioned, I just used it a month ago to update the phone. No clue why the computer won't see the phone as connected.
I should note that I can't get the Device Manager to see anything connected, either, so it's not trying to update drivers or anything. Besides, I believe those are current, since everything worked a month ago.
Thanks.
MSFT issued a bunch of security patches on 10 NOV. I wonder if that screwed up something? Is anyone else having issues with Windows recognizing that the phone is connected? Neither MTP nor PTP storage mode makes a difference.
FYI, looks like the culprit. I rolled back all the system updates and now the phone is recognized. Now I just have to go one-by-one and figure out which one broke ADB...
I've been having this problem for a long time, can't remember how much exactly. No matter what I've tried, I haven't managed to get my computer recognize my opo. I am still running Cyanogen 13.0, as it was the latest OTA update I got.
When I connect it via usb, absolutely nothing happens (I've also tried two cables). I have the device manager open and it doesn't even flash as it used when I had similar problems, which means that the device is not recognized at all. Therefore, I cannot find/update/remove the drivers anyhow.
Developer options on my phone have a bunch of things but none seems relevant, apart from open/close Android debugging (adb) and select USB Configuration (Charging/MTP/PTP etc). I've tried several options, nothing seems to change.
I've also installed some Windows MTP drivers (see here) which were supposedly solving the issue caused by a Windows 10 update, but no luck (which could have been the issue, but can't be sure-I can't remember the last time I was able to browse my phone's memory).
Any ideas?
tony.crete said:
I've been having this problem for a long time, can't remember how much exactly. No matter what I've tried, I haven't managed to get my computer recognize my opo. I am still running Cyanogen 13.0, as it was the latest OTA update I got.
When I connect it via usb, absolutely nothing happens (I've also tried two cables). I have the device manager open and it doesn't even flash as it used when I had similar problems, which means that the device is not recognized at all. Therefore, I cannot find/update/remove the drivers anyhow.
Developer options on my phone have a bunch of things but none seems relevant, apart from open/close Android debugging (adb) and select USB Configuration (Charging/MTP/PTP etc). I've tried several options, nothing seems to change.
I've also installed some Windows MTP drivers (see here) which were supposedly solving the issue caused by a Windows 10 update, but no luck (which could have been the issue, but can't be sure-I can't remember the last time I was able to browse my phone's memory).
Any ideas?
Click to expand...
Click to collapse
If win10 causing that much issues,why don't dual boot win7 alongside?
Edit- I personally use Win8.1 Pro and it works fine without any issues.
I've been running Windows 10 insider builds for a while and run Into the same issue at some point, I'm not sure on which build you are currently on, I've reported that on the insider HUB but got no reply. I found a "solution" which is selecting PTP in the options and the phone will be mounted as a media device and you'll be able to access DCMI folder and pass files. It doesnt mount always, but you need to try some extra times.
Another workaround is to use an USB drive and the use an OTG cable.
Apparently, it was just the cables' fault. I didn't figure it out immediately, as I had two faulty cables instead of one, but after all I came over a working one and the opo was recognized and mounted as usual.
Thanks anyway
tony.crete said:
Apparently, it was just the cables' fault. I didn't figure it out immediately, as I had two faulty cables instead of one, but after all I came over a working one and the opo was recognized and mounted as usual.
Thanks anyway
Click to expand...
Click to collapse
Cheers!
tony.crete said:
Apparently, it was just the cables' fault. I didn't figure it out immediately, as I had two faulty cables instead of one, but after all I came over a working one and the opo was recognized and mounted as usual.
Thanks anyway
Click to expand...
Click to collapse
I wish I had the same issue ?
I'm posting cuz I've literally spent hours and hours searching, trying things, etc, and am stuck. I have several PQs with various CM/LineageOS ROMs. It is not a ROM issue because if I plug via USB into my desktop pc running win 10, they all work as I want. Presumably, it's a driver issue or something related to my specific laptop - I recently bought an old used laptop, originally shipped with win7. After purchase I immediately removed all partitions and installed win10 from disc (fyi, you can d/l win10 iso from microsoft and use win7 oem key to legally install fresh win10, even now the free upgrade stuff is over - that surprised me).
I cannot, no matter what I do, get file access via usb to my phone. I've tried lotsa things. I don't remember if/what I had to do to make my win10 desktop see them - maybe it was automatic, i dont remember, if it wasnt, I easily downloaded/installed what was necessary - but nothing I've tried makes my win10 laptop load the drivers, although it does detect something when I plug it in, and something else when I select MTP on the phone (vs charge). But just exclamation points in device manager and nothing in explorer. Among other things, I've tried MotorolaDeviceManager_2.5.4
It's especially annoying as I have a video on my phone I wanted to send out tonite and can't, spent another couple hours trying. Bluetooth works fine for pictures but freezes at 10% for video, no idea why. But I'd much rather just use a cable than figure out any wireless BS.
Incase it's something specific to this laptop and someone is curious, it's a Sony VPCF115FM. That 'base system device' and "unknown device" are always "!", MTP with "!" only appears when phone plugged in.
Yea definitely a driver issue. When you plug the PQ into your desktop (which seems to work) what shows up in device manager?
Have you tried to right click on the devices with yellow exclamation points and update the driver from Windows update?
I never followed up on this, but still haven't found a solution, and kinda forgot about it. It does work in PTP mode. And works for a newer Moto (Lenovo) phone on this laptop. Yes, I tried the windows 10 device manager update auto search thing (in fact, just tried it again minutes ago before I read this). I'm about to wipe and install fresh as this phone is running crazy slow lately and wanted to copy everything off before I wipe which is what reminded me of this issue - funny thing is that a google search of this problem ("mtp driver motorola photon q windows 10") found this thread as the third search result and I completely forgot I posted it. I vaguely recall I read your reply but was waiting to see if anyone else responded and then just forgot to follow up when it wasn't on my new list...
PROBLEM SOLVED! It happened in TWRP too and sideload was failing (for another reason) but made me try to figure out MTP again.
Found solution here for anyone with similar issue:
https://answers.microsoft.com/en-us...0-solved/d2226a54-65db-41ba-9398-a12196cc279c
Gotta update driver and manually select "MTP USB" from list of devices, in my case I found it under portable devices.
Hi,
My girlfriend has some issues with her W10 PC. She's on the normal builds (not Insider), latest updates.
The PC is able to read other USB sticks, so the ports are not broken. The phone is identified by the PC, but it only works as a charger. When the state is changed to MTP, nothing appears in My Computer.
I tried to hook it to my W7 work laptop and everything was fine. I have to add that no drivers for the phone were installed on my part.
Any idea if this is a known glitch with W10? I'm on the Skip Ahead builds, so I don't think it's relevant if I check it on my personal laptop.
Thing is, the phone was seen by the PC just fine until a while ago (I don't know what ago means, girls have weird time perception when it comes to technology).
Any hints on what can I do to fix this?
Thanks!
I use Windows 10 Pro with latest updates and Windows and Odin see the phone but not adb for some reason.