Database Info

Recovey GONE (No comand)

Hey guys.
I just installed the German OTA 4.4.2, on my Retail.GB Moto G, but now i have no recovey.
All i get is the Android guy on it's back with "No Command" written under him.
I've tried to install CWM 6.0.4.5 AND TWRP 2.6.3.0 with no luck...
Any help would be greatly appreciated.

I guess download stock ROM and flash stock recovery via fastboot. If it fails then reflash entire stock image, ie ROM, recovery etc.
Twrp cwm still flaky on kitkat I think.
Should have waited for GB update

Villyvon said:
Hey guys.
I just installed the German OTA 4.4.2, on my Retail.GB Moto G, but now i have no recovey.
All i get is the Android guy on it's back with "No Command" written under him.
I've tried to install CWM 6.0.4.5 AND TWRP 2.6.3.0 with no luck...
Any help would be greatly appreciated.
Click to expand...
Click to collapse
While on that "no command" screen, hold volume up and power for 2 seconds and release and you should see recovery menu. Some report to use triple hold - volume up + down + power.

drfr said:
While on that "no command" screen, hold volume up and power for 2 seconds and release and you should see recovery menu. Some report to use triple hold - volume up + down + power.
Click to expand...
Click to collapse
Worked like a charm! Thanks

Cannot install TWRP over Huawei eRecovery??

I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version

ure going about this all wrong mate
as already explained in the other thread, u cant enter twrp that way. if u press power up in the start screen ull always end up in the erecovery, no matter which regular recovery u have flashed.
easiest way to enter regular recovery is to install flashify from the playstore and choose to reboot phone into recovery
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

cheth20 said:
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
Click to expand...
Click to collapse
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk

tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp.
Click to expand...
Click to collapse
This.
Power plus volume down does nothing, TWRP-wise. However that is whta's being said to press in 99% of the threads/tutorials.
Took me HOURS and countless re-flashing of TWRP to figure this out myself. (the up *plus* down thingy). Really annoying.

tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
Thanks a ton! this worked

cheth20 said:
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
Click to expand...
Click to collapse
Well, I have a question. What is the eRecovery, because I've seen this screen also and I dont know what it does. Also, there are three options in it: download latest version and recovery, reboot and shutdown. So if I press download latest version and recovery what will happen? Because I'm actually looking for a way to get off TWRP without having to lose any data (I want to install the latest OTA, but I've seen that TWRP doesn't support well those, and I don't want to mess up my phone)...
Please help!

easy: download a stock rom identical to your current version, extract recovery partition using the huawei app extractor from the rom's update.app file and then flash that through fastboot
and since u probably have no idea what im talking about, i suggest u use google and xda search functions before asking any further questions here dont be lazy and expect everyone to work for you and serve everything on a silver platter, do your due diligence!
Sent from my Huawei Mate 8 NXT-AL10

Hi, simply press Volume up an down at same time when device is powering up...and hold it, until Twrp logo is on the screen. Works always for me.
Greets Tobias

OMGiidiness
Guys, volume-up+power goes to recovery
Volume-down+power goes to fastboot or bootloader

bluheart said:
OMGiidiness
Guys, volume-up+power goes to recovery
Volume-down+power goes to fastboot or bootloader
Click to expand...
Click to collapse
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)

True, when usb is attached

tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Click to expand...
Click to collapse
I can attest to this, i flashed twrp many times thinking it was not working beacause i am used to the mate 7 holding volume up + power long enough boots into recovery (twrp) but this won't work on mate 8

sibiyav1486 said:
I can attest to this, i flashed twrp many times thinking it was not working beacause i am used to the mate 7 holding volume up + power long enough boots into recovery (twrp) but this won't work on mate 8
Click to expand...
Click to collapse
Works just fine.

Work like a charm
cheth20 said:
Thanks a ton! this worked
Click to expand...
Click to collapse
Work like a charm ...

Same to me
I see same this problem from my Honor 6X Pakistani version

installed twrp in my ,honor 5c,,,but cant get to the recovery,,tried every version of u tip,guys,,,what to do,,,,?

I have same problem, in theory i have TWRP as recovery but when star entry in eRecovery .... help

tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
Thanks mate it worked out perfectly.

to come to twrp hold on the volume+ and volume- works on mine P10

Get into recovery without volume buttons

Hey everyone
my opo have the internal volume buttons broken. I flashed a custom ROM on it and I forgot to do a factory reset before I firstly boot up the phone with the new ROM. So it stuck on the boot animation.
can someone help me out please?

You have to open it if the power menu has no "Boot to recovery option".

qwertyng said:
Hey everyone
my opo have the internal volume buttons broken. I flashed a custom ROM on it and I forgot to do a factory reset before I firstly boot up the phone with the new ROM. So it stuck on the boot animation.
can someone help me out please?
Click to expand...
Click to collapse
It can be done via ADB, using this command
adb reboot recovery

omega_warrior said:
It can be done via ADB, using this command
adb reboot recovery
Click to expand...
Click to collapse
Uqbar said:
You have to open it if the power menu has no "Boot to recovery option".
Click to expand...
Click to collapse
I'm stuck on boot animation without ADB enbaled

There is only One way left then I think... Flash Official COS via fastboot, that should boot normally, then enable advanced power options and access recovery via ADB.

moto softbricked (bootloop, can't enter into TWRP recovery )

while i was trying to flash another rom on my device it turned off in the middle of the flashing and since then it is stuck in bootloop , i tried to enter in to the recovery (twrp) but it again gets into the bootloop after showing the TWRP logo, tried flashng the TWRP recovery but the phone is not being detected on PC .... kindly help me people

mmm, try upgrading recovery to the latest from TWRP official site. never used 2.8.5.
have used 2.8.7.0 during lollipop days, and it had no issues

koshikas said:
mmm, try upgrading recovery to the latest from TWRP official site. never used 2.8.5.
have used 2.8.7.0 during lollipop days, and it had no issues
Click to expand...
Click to collapse
thanks for the reply mate , now i am have increment in my problems , the other day i tried to flash another rom and during the flashing my phone went off and since then it is stuck in boot loop(not booting though) i can't enter in to TWRP recovery , (it displays the TWRP logo and again gets stuck in boot loop ) tried connecting to the PC in order to update the recovery but the command prompt isn't recognising the device though i installed ABD tools etc ... a bit too much to ask but can you suggest me what to do next ?

kartikey07 said:
thanks for the reply mate , now i am have increment in my problems , the other day i tried to flash another rom and during the flashing my phone went off and since then it is stuck in boot loop(not booting though) i can't enter in to TWRP recovery , (it displays the TWRP logo and again gets stuck in boot loop ) tried connecting to the PC in order to update the recovery but the command prompt isn't recognising the device though i installed ABD tools etc ... a bit too much to ask but can you suggest me what to do next ?
Click to expand...
Click to collapse
i would while booting the device keep pressing the power button to force shutdown the device. immediately after turning off, press and hold both power button and vol - keys for 10sec or more and release. this will get you into the bootloader screen. on that keep pressing vol - to select 'recovery' and press vol + to go into the recovery. good luck

koshikas said:
i would while booting the device keep pressing the power button to force shutdown the device. immediately after turning off, press and hold both power button and vol - keys for 10sec or more and release. this will get you into the bootloader screen. on that keep pressing vol - to select 'recovery' and press vol + to go into the recovery. good luck
Click to expand...
Click to collapse
yep tried this , on doing so it gets in TWRP recovery (the logo displays) but it again go into bootloop without actually booting into the recovery ... i am kind of stuck

kartikey07 said:
yep tried this , on doing so it gets in TWRP recovery (the logo displays) but it again go into bootloop without actually booting into the recovery ... i am kind of stuck
Click to expand...
Click to collapse
that leaves you only with one option. get into the bootloader screen, and flash the latest stock ROM using fastboot commands. then try flashing custom recovery, custom ROM from the beginning. i would skip flashing bootloader though.

koshikas said:
that leaves you only with one option. get into the bootloader screen, and flash the latest stock ROM using fastboot commands. then try flashing custom recovery, custom ROM from the beginning. i would skip flashing bootloader though.
Click to expand...
Click to collapse
please provide a link for the same tutorial (step by step)

Stuck at TWRP Loop!

My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks

I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo

farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
Nothing to worry and don't panic,
I've been facing problem like this.
To enter bootloader / download mode. With USB Cable plugged You must press and hold Power + Vol Down button then count it for 7-8 seconds, after that immediately release Power button, and press Vol Up + Down. Repeat this step if fail. U will see Download mode.
Regards.

szymin22 said:
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
Click to expand...
Click to collapse
Just need perfect count like 7-8 secs You will faced Download mode.
Regards.

farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
You hold volume down + power button for 7 seconds and phone will be power off.
Then you press both volume buttons (vol up + vol down) and plug in cable what is connected to computer, this pusch you to download mode of phone.

farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply

play 5 said:
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
Click to expand...
Click to collapse
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
fastboot devices
Click to expand...
Click to collapse

Krys89 said:
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
Click to expand...
Click to collapse
If you mean Fastboot when I go to the official a750fn recovery there are a part his name install update from adb
If you mean it Im trayed only this command Fastboot reboot and after phone boted to OS
A think it mean its work right?
Or if fastboot the download mode yes it is work
Waiting your reply

Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
fastboot devices
Click to expand...
Click to collapse
it must show the id of device

Krys89 said:
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
it must show the id of device
Click to expand...
Click to collapse
I used these command many time but in adb mode

exactly this is the thing I missing the Fastboot mode to...

Hi, Bennie from Holland here, with the same problem: tried to flash Twrp to the Samsung A750FN and now stuck in not working Twrp logo, flashing for 2 seconds and further a black screen< The fastboot using Odin can be used via the method described by szimin22, bur the adb fastboot gives no response. Does someone know the correct trwp version for this mobile or a firmware file that can be flashed by Odin?

A Week Later ...
i have installed on the a7 the firmware dated okt 2020 and i can install without any prob trwrp or PBRP! but the machine goes into bootloop again. The only thing which seems to be resolved is a normal functional recovery. Now the return to the phone itself and we are home! any suggestions, pls give us a chance to not smash the a7 through the kitchenwindow