Hi all,
I'm new to the forum but have been following XDA for a good while without being registered because most of the answers to my questions were found within other forum posts but I've not found an answer to this question;
I currently possess a Samsung Galaxy Tab 2 (GT-P5110) and the touch screen does not work. The LCD works perfectly but doesn't respond to touches. I ordered an 81 pin FPC connector to replace the old port directly on the main board but am not 100% sure on how to remove the old one. The reason for the replacement was that I noticed a few bent pins which I believe may be causing the problem.
Can someone point me in the right direction. I won't take it to a shop because I am looking at this as a learning curve so would prefer to do this from home.
What tools would be required to remove the old 81 pin FPC connector from the GT-P5110.
Any help would be much appreciated and thank you in advance.
Hi there
You'd be best served asking for help from the experts who own your device, here:
Galaxy Tab 2 Q&A, Help & Troubleshooting
Good luck
Thanks Razvan I have posted in the relevant forum.
(Probably about to get into trouble for duplicate posts mind you [emoji16][emoji106])
Sent from my iPhone using Tapatalk
Related
Hello Guys..
i have Neken N6 and i really love this device , its with 2GB of RAM , and 32 GB of phone storage ,
i have been using this past 6 months without having any problem , but couple of weeks ago i just got a small crack over top left of the screen
only the screen's glass got cracked, everything is working perfectly (touch, screen, etc)
but i just want to change the screen's glass, its kinda annoying every time i look at the phone see that crack.
i looked around for parts for Neken N6 , but i didnt find any sources of buying parts for this phone.
Please anybody can introduce me where can i get the screen replacement for this phone ?
Thank you
Hi,
Unfortunately there's no info related to your issue that I can find on XDA. You'd need to ask for help here...
>Android Development and Hacking >Android Q&A, Help & Troubleshooting
Good luck!
ok dear thank you,
can you please delete this thread from here? because i just opened a new thread over there, just to not become multiple threads with same discussions .. thank you
Don't worry, discussion doesn't take place here! ?
Thread closed. Thank you!
Dear all,
I need your help. Well, I plugged my phone Galaxy S2 to a charger which the voltage polarity was reversed manually.
So the phone had a short circuit. Therefore, I replaced the power card which is in the Galaxy and when I plugged it again on the other charger, I found that the phone doesn't start and one component on the mother board of the phone is heating a lot. the component is located just below to the cam.
If any one can help me to have the schematic drawing with also the layout drawing to find what kind of the component is that, so I can buy it.
Other wise, if someone can help me what can I do.
If you need more information I can give you.
The goal is to have my datas while I didn't save them to my pc exceptionally all my contacts.
With best Regards,
Hi,
Sounds like you fried something... And if it won't turn on, I can safely say there is nothing you can do.
For other ideas or to ask about schematics.... A google search may help, or if you let me know your device model number, I can point you to your device section.
Thanks!
The device model is GT-i9100. I didn't find neither the schematic nor the layout drawing on google search!!!
Thank you for helping me.
Best Regars,
Darth said:
Hi,
Sounds like you fried something... And if it won't turn on, I can safely say there is nothing you can do.
For other ideas or to ask about schematics.... A google search may help, or if you let me know your device model number, I can point you to your device section.
Thanks!
Click to expand...
Click to collapse
Any questions or issues on that device can be asked here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly Q&A thread
?
i bought anew screen but the problem is when i fix it my s3 mini the touch screen does not working the back and men works and the power and home button works either
XDA Visitor said:
i bought anew screen but the problem is when i fix it my s3 mini the touch screen does not working the back and men works and the power and home button works either
Click to expand...
Click to collapse
Hello, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/galaxy-s3-mini
After creating your account, here is where you should post this question:
http://forum.xda-developers.com/galaxy-s3-mini/help
The experts for your device are located there and will be able to help.
That being said, as fixing devices is how I make my living, I believe either you have not seated all your connections properly or you have a faulty replacement part. Please double check all of your connections.
Always test your replacement part before final assembly.
Good luck!
Hello,
Can you help me? I have an s5 and for the last three days when I plug in my mhl Samsung adapter it turn my phone off now before these three days it was woking no it just keeps turning my phone off. I brought a new hdmi cord I even took the Samsung adapter back and got a new one and its still doing the same thing, so what should I do?
Lana30 said:
Hello,
Can you help me? I have an s5 and for the last three days when I plug in my mhl Samsung adapter it turn my phone off now before these three days it was woking no it just keeps turning my phone off. I brought a new hdmi cord I even took the Samsung adapter back and got a new one and its still doing the same thing, so what should I do?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the Samsung Galaxy S5 at http://forum.xda-developers.com/galaxy-s5 which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s5/help or the Accessories forum at http://forum.xda-developers.com/galaxy-s5/accessories where the experts familiar with your device will be best able to guide you.
Good luck!
Hello, I have a fake Samsung (Chinese) smartphone. It used to work but, It was lost and I found it. Battery gone bigger and now screen is a little bit apart of the case (like 3-4 mm).
Now I would like to use this smartphone without battery. I researched a little bit and I found a video of an Indian guy on youtube that shows which wire will be soldered to where. (Because I am new, I can't insert links to this post. The video is "Use your phone without a battery....USB phone.....Works for android like charm" on Youtube.)
But his smartphone has 3 terminals and mine has 4 of them. I am not sure of where to solder them. Can you help me, please?
oi67.tinypic.co m/2hromeq.jpg
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist