So i have downloaded all the tools i could find and tried each one of the.
Last time when i was trying to flash kdz on my lu6800 the only tool that worked was lg update tool 2014.
But this time when i try to flash kdz on my lg lte 3 it stops on the extraction process.
No notification or warning like extraction error it just stops and exit button appears instead of cancel.
What should i do
haceeb said:
So i have downloaded all the tools i could find and tried each one of the.
Last time when i was trying to flash kdz on my lu6800 the only tool that worked was lg update tool 2014.
But this time when i try to flash kdz on my lg lte 3 it stops on the extraction process.
No notification or warning like extraction error it just stops and exit button appears instead of cancel.
What should i do
Click to expand...
Click to collapse
Hi, please try asking here:
http://forum.xda-developers.com/showthread.php?t=2423512
You might have better results.
Good luck!
Related
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
Have you tried the LG PC Suite? I found it very useful several times for getting out of a mess on my old G2.
Be careful! When I performed a factory reset on my G Pro 2 my external sd card got wiped.
Sent from my LG-D802 using XDA Premium 4 mobile app
help
Hi Vishesh,
Were you able to recover your phone?If yes then please help me getting out of a bootloop
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
I flashed my phone yesterday (bootloop) with this tutorial http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
Use this modded tools to flash your KDZ file
choose 3GQCT for Type
CS_EMERGENCY for PhoneMode
select your KDZ
put your phone to DOWNLOAD MODE then press Normal Flash, it takes about 12 mimutes to finishs
A factory reset is recommended
Link : http:// w w w.mediafire.com/download/mc2wmpdjt38sdr8/LG+Flash+Tool+2014.rar
Credit go to oringinal author
LG G Pro2 D838 bootloop
My LG G Pro2 D838 model keep looping it isn't giving me enough time to hard reset or to change the ROM it just keep boot looping every 5 + seconds and when i plug it in to charge it just keeps looping over and over again without seeing the charging light appearing
Same problem here with my F350L !!!
My phone got stuck at 90% while flashing. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. I can not go to download mode, either. My phone now is on a 'bootloop" mode.
Any help from our Masters out there on how I can fix this bootloop issue?
TIA.
Note: On Lollipop F350v20f
---------- Post added at 11:06 AM ---------- Previous post was at 10:46 AM ----------
gunlock4real said:
Use this modded tools to flash your KDZ file
choose 3GQCT for Type
CS_EMERGENCY for PhoneMode
select your KDZ
put your phone to DOWNLOAD MODE then press Normal Flash, it takes about 12 mimutes to finishs
A factory reset is recommended
Link : http:// w w w.mediafire.com/download/mc2wmpdjt38sdr8/LG+Flash+Tool+2014.rar
Credit go to oringinal author
Click to expand...
Click to collapse
Can't go to download mode as my phone F350L is no longer detected by my PC after it went bootlooping non-stop.
Is there any other better way?
TIA.
[Q] D838 can't boot into system, only LG logo then blank with LED green&light blue
Hi, I just bought D838 yesterday and used TowelRoot & supersu to root my phone.
After root ok, I saw an artical about how to release the limit of split windows by editing build.prop.
After editing i paste back but seems i lose a critical point to modify read/write authority.
Now the phone can't boot into system, only shows LG logo then blank and LED blink green & light blue.
my D838 can into download mode, and pc can detect usb device.
I had tried official LGmobile support tool upgrade, but stopped at 2%(shows error).
Also tried offline KDZ flash tool, but finally LGmobile support tool always anto opened then the result same with above condition.
I have no idea what i can do, hope someone can help me~~~
tks.
yuor problems sloved?
Atefstrong said:
yuor problems sloved?
Click to expand...
Click to collapse
yes, later on, I flashed D838 10D TOT file and it worked.
I just don't know why I can't flash successfully by KDZ.....
I'm also not able to flash any KDZ files. Could you please upload your D838 TOT file, it would save my phone if you did upload it for me.
I have Lg e440 = LG L4 II
i was using it one day like a week a go then it booted into hard reset mode and started doing it and restarted and stuck at lg logo from that time
I used LG flash tool 2014 to flash kdz V10F_00 UAE and the tool force close after kdz extract that is in CSE flash mode = log attached
2nd = i used Normal flash mode the force close is gone but it stop at 5% when flashing the kdz and say connect the phone to pc and it is connected and it is there in device manager and every thing is ok and i have latest drivers
what i did = 1. used cdma and 3GQCT mode no change
2. i have all drivers installed right and the phone read right because i own LG G2 D802 and i use the flash tool a lot
3. connect and disconnected the phone a lot in 2nd try but no effect
3. i try to do hard reset but no effect it just restart and stuck at lg again
4. i cant find any other thread with same problem that i can find
I need help for my old LG E440
Thanks in advance
and sorry for my bad English
View attachment Log2.txt
No one can help ?
Hi, thank you for using XDA Assist. There is not much activity on XDA about your device. But see if someone in this thread can help, http://forum.xda-developers.com/showthread.php?t=2775750&page=14
help
I have Lg e440 = LG L4 II
i was using it one day like a week a go then it booted into hard reset mode and started doing it and restarted and stuck at lg logo from that time
I used LG flash tool 2014 to flash kdz V10F_00 UAE and the tool force close after kdz extract that is in CSE flash mode = log attached
2nd = i used Normal flash mode the force close is gone but it stop at 5% when flashing the kdz and say connect the phone to pc and it is connected and it is there in device manager and every thing is ok and i have latest drivers
what i did = 1. used cdma and 3GQCT mode no change
2. i have all drivers installed right and the phone read right because i own LG G2 D802 and i use the flash tool a lot
3. connect and disconnected the phone a lot in 2nd try but no effect
3. i try to do hard reset but no effect it just restart and stuck at lg again
4. i cant find any other thread with same problem that i can find
I need help for my old LG E440
Thanks in advance
and sorry for my bad English
http://dl-1.va.us.xda-developers.com/3/3/3/2/9/8/7/Log2.txt?key=wpadtwlOpunqazL_YrY-eg&ts=1432857652
Hello guys, I have an Lg g2(vs980). Some days ago, I flashed Grolla rom on it and then it always booted in fastboot mode. Then somehow I got it into the download mode. I thought that it would be easy now to flash through lg flash tool. First I tried Kdz method but it always stopped at 2%. Then I tried tot method but every time I try to install the tot file, if I use vs980 dll file it shows me the error "Phone model is different. Check phone or dll" and if I use universal dll for lg mobile it shows me error"Crossdl [l01f] to [vs980].
Its been 3 days I am trying to unbrick my phone but all in vain. Somebody please help me.....
I solved my problem. It was a simple mistake that wasted my whole day. I didn't replaced the megalock.dll file in lg flash tool dirctory with the given megalock.dll file. After replacing, i used the universal dll file with my tot file and i was able to flash. Thankx Allah.
My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....