[Q] D838 can't boot into system, only LG logo then blank with LED green&light blue
Hi, I just bought D838 yesterday and used TowelRoot & supersu to root my phone.
After root ok, I saw an artical about how to release the limit of split windows by editing build.prop.
After editing i paste back but seems i lose a critical point to modify read/write authority.
Now the phone can't boot into system, only shows LG logo then blank and LED blink green & light blue.
my D838 can into download mode, and pc can detect usb device.
I had tried official LGmobile support tool upgrade, but stopped at 2%(shows error).
Also tried offline KDZ flash tool, but finally LGmobile support tool always anto opened then the result same with above condition.
I have no idea what i can do, hope someone can help me~~~
tks.
yuor problems sloved?
Atefstrong said:
yuor problems sloved?
Click to expand...
Click to collapse
yes, later on, I flashed D838 10D TOT file and it worked.
I just don't know why I can't flash successfully by KDZ.....
I'm also not able to flash any KDZ files. Could you please upload your D838 TOT file, it would save my phone if you did upload it for me.
Related
any1 have a copy of Bell/Virgin LG Eclypse C800G Stock Rom/backup? and info how to re-add the rom back to the phone?
I restarted my phone and now its stuck on the LG Logo boot screen. I tried doing the Hard reset using Vdown + A + F + Power came up with the android logo and still nothing. now since doing the hard reset its just always after turning on it goes into the reset mode then lo boot logo and sticks with the boot logo.
Thanks
P.S. sorry if this is in the wrong section and if so please place it to right section without deleting topic? Thanks
anyone?
Please I'd be most thankful if you could help me out as i really need the phone since the wife is 8months pregnant and I need the phone just in-case she goes into early labor and I'm out or at work she can call me.
Thanks
solution yet?
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
Nope sorry. Wish I did.
DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
where did you buy the phone?
i got it off my roommate he just turned it off one night then when he turned it back on it was stuck on LG screen then i tried a restore and now it gets stuck on the restore/ android unboxing screen then it stops and reboots and does it again
I believe that I have found the Stock Rom for the LG Eclypse | LG-C800G
LG Eclypse | LG-C800G Stock Rom in KDZ file format:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
I'm new to this so if anyone knows how to load the .KDZ file to the phone can you please let me know?
Thanks
BTW I found the ROM by going here:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>YOUR IMEI WILL BE HERE</esn>
<model>LGC800G</model>
<suffix>AVMBDG</suffix>
<msn>YOUR PHONES S/N WILL BE HERE</msn>
<esn_date>THE DATE OF THE IMEI WAS CREATED</esn_date>
<sw_version>V10C_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_url>
<sw_locale_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Thanks to Crashff over @ androidforums.com and his/her post @- http://androidforums.com/t-mobile-mytouch-q/589060-c800-submodels-g-dg-vl.html
I would like to inform XDA-Dev that the LG Eclypse | LG-C800G Stock Rom in KDZ file format is the true stock rom for the LG Eclypse | LG-C800G. I have tested it and it recovered my device.
I will give a lil info on how I did it the best I can but bare with me as I was not really keeping track on what I was doing when i did it.
1.) Download the LG Eclypse LG-C800G Stock Rom in KDZ file format by going
here:
- http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
and enter your IMEI where you see INSERT IMEI HERE in the address bar
or if your with (Virgin Mobile CANADA) then here:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
2.) Plugged in the phone
3.) I disabled the lge android platform usb modem
4.) I clicked on msxml.msi and
uninstalled it. then reinstalled after
uninstall was completed
5.) right clicked on KDZ_FW_UPD.exe ( You can download KDZ_FW_UPD.exe here: http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698 ) and
went to Properties then Compatibility and selected Windows XP SP2.
I also clicked on Run this program as an administrator. then pressed Apply or OK
6.) I then opened up B2CAppSetup.exe (DON'T DO ANYTHING WITH IT YET wait till you get to ((STEP 10)) ) it can be found here: http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
7.) I then ran KDZ_FW_UPD.exe and only changed the phone mode to EMERGENCY or CS_EMERGENCY I can't remember what one i picked so try all.
8.) I then selected the KDZ File
9.) I then pressed Launch software update as it was extracting the KDZ file
I did this (Step 10)
10.) I then went back to B2CAppSetup.exe then clicked on Customer Support then clicked on Recovery Phone then I entered in my IMEI then pressed Check
and there ya go. the B2CAppSetup.exe should look for and download your rom as KDZ_FW_UPD.exe starts recovering your phone. now let both complete even if one says its done.
Again hope this helps and sorry if its not a good guide as i was not keeping track as to what I was doing.
Lnks not working for the downloads
Plz am currently in gh same situation bt th lknks are not working. plz help me find th stock fom since I've looked allover in vain.
Halp
I need this, I have the T-mobile version of the rom. But I would really like the Canadian version, without the T-mobile **** on it.
Hi,
I am newbie here having recently bought an LG G Pro 2 F350s with CN mod V2 rom installed. I want to revert back to stock ROM (not sure if the stock rom is still inside the phone or not), but it seems like the phone cannot enter into Recovery Mode by holding down Power and Vol down key. The LG Logo seems to go in a loop with the logo and blank screen and than LG logo going on and on. Also please give me a link to get the stock F350s TOT file and DLL as all the links available seems to be broken and/or websites hosting them not working. Thanks in advance.
wenchebach said:
Hi,
I am newbie here having recently bought an LG G Pro 2 F350s with CN mod V2 rom installed. I want to revert back to stock ROM (not sure if the stock rom is still inside the phone or not), but it seems like the phone cannot enter into Recovery Mode by holding down Power and Vol down key. The LG Logo seems to go in a loop with the logo and blank screen and than LG logo going on and on. Also please give me a link to get the stock F350s TOT file and DLL as all the links available seems to be broken and/or websites hosting them not working. Thanks in advance.
Click to expand...
Click to collapse
I am also stuck with the recovery issue. Same problem. But you can flash stock ROM. Download it from the below mentioned link
https://docs.google.com/file/d/0B2d5-KLYqmKWT3E0enI5STFOY3M/edit
Guide to flash stock firmware
http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
Thanks ahsanshah
I am on to it, downloading the tot file right now. I hope it will solve my problem and also pray that you get to have your problem solved. Also please do tell me how to install Felix Version 3 after I get to have the stock rom in and running on my F350S. Thanks again.
Actually that is not a problem. THere is no custom recovery for this F350L. After flashing this tot file just root the phone using towelroot https://towelroot.com/. After that you can easily install felix rom . Instruction is there on the page.
Thanks Ahsan Shah. I was able to install stock rom. God bless you. Just a thought...which root is better and more safe i.e. IoRoot25 or Towelroot. Thanks again.
Towelroot is good and working perfect
I had a massive problem with my phone suddenly as it stopped detecting the SD-card or SD-ext.
I was advised by someone on the XDA forum that to fix this I needed to ''use kdz to flash a stock rom to restore the system''.
And so I downloaded the KDZ tool, downloaded the earliest rom in kdz format that I could find online (version 2.1), and followed the process to install this using KDZ through my laptop.
However all this did was totally ruin my phone!! :'(
As now it wouldn't even start up, just showed a black screen saying Linux panic and arms 11 error.
I managed to find a rom called CM recovery rom, and when flashing one through KDZ tool it atleast doesn't show that error screen anymore,
however when trying to turn the phone on it just stops at the android boot logo and gets permanently stuck there.
My goal is to get back to the rom i was on before the phone broke (CM 4.2.1),
AND,
to have the SD-card and SD-ext both being detected and working correctly.
However currently the phone wont even turn on!! :'(
Please can someone help me by telling me exactly how to fix this please??
How can i fix this? Need help
Flash again using LG Flash Tool, use D838 international version of Lollipop stock rom
Go to 'Download Mode'
Set the flash tool to CDMA+Emergency
Make sure you do everything OFFLINE
My phone got stuck at 90% while flashing D838 ROM. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. My phone now is on a 'bootloop" mode. And I can no longer go to Download mode so I can flash anew.
Any help from our Masters out there?
TIA.
profeduards said:
My phone got stuck at 90% while flashing D838 ROM. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. My phone now is on a 'bootloop" mode. And I can no longer go to Download mode so I can flash anew.
Any help from our Masters out there?
TIA.
Click to expand...
Click to collapse
Take a look at my thread for LG V20, read fastboot tutorial in particular. Most knowledge on my thread applies to LG-D838 which I own too. Just change things accordingly. For instance, instead of LG UP tool use LG Flash tool.
Once you read the articles, you would be your own master. Good Luck.
My LG v10 stuck on LG Logo, but when I attach an USB cable with computer it further goes to att logo and after 3 or 4 spins, it again stuck on att logo. I can get into download mod but not recovery or safe mod. I tried to flash my phone with LGUP but it shoes unknown model. tried with upper cut and common folder options but no luck. LG flash toll 2014 does not detect my phone and application stop responding when I try to read phone information. tried on different computers, different USB cables and different windows but the result is same. Once I had a LG f350 and faced the same problem. Only LG Flash tool 1.8 worked for my LG F350. I am hope full it may work for my LG H900 but I can't find TOT+dll file for LG H900 nowhere. Any one can help please.
I was on 5.1.1. rooted, Super SU and busy box installed when I tried to factory reset my phone and got into this trouble.
More Problems
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Shahidessa said:
I got a LG Firmware Extractor from a post on XDA. Extracted the KDZ file and got a .dz and .dll file. extractor also showing another file (something like .dllyib i think) but I ignored that and extracted what I needed. After that I flashed my phone with lg flash tool 1.8.. but flash tool kept on installing system file after 100% but my phone was stuck on 99%. After 117 % flash tool showed "waiting for connection" and then failed. I tried to reflash and got the same result. Now after showing LG screen, my phone got stuck on a black screen showing some bars going up and text "MiniOS" and stuck on this screen. I searched for the solution and some one told me to disconnect phone when flashing reached at 99% and then reattach it after changing the port. I did that but what I got was worse than before. :crying: Now I can get into recovery screen but after applying factory reset, phone goes off and restart again without doing any thing. My phone is stuck on boot loop at LG Logo. it keep booting when i connect to a charger or my computer . I cant get into download mod now. when I try to get into download mod, the screen with some dots appear and then phone restart again without going into download mod. when I connect my phone to PC it only do boot looping and nothing appear on my computer. My phone does not appear in device manager. Is there anything I can do now????????
Click to expand...
Click to collapse
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
SandyKick said:
hi @Shahidessa any luck ? what happend did you suceed flashing the phone ? same problem with mine as well T-mobile H901 but not detedting in LGUP. any idea on LG Flash tool ?
Click to expand...
Click to collapse
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Shahidessa said:
Nop. .. I sent my phone to a friend to get that repair from a repairing shop... not received back yet....
Click to expand...
Click to collapse
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
SandyKick said:
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
Click to expand...
Click to collapse
Great.... I am happy for you... My phone rejected by 3 repair shops as my friend told me.....