I have Lg e440 = LG L4 II
i was using it one day like a week a go then it booted into hard reset mode and started doing it and restarted and stuck at lg logo from that time
I used LG flash tool 2014 to flash kdz V10F_00 UAE and the tool force close after kdz extract that is in CSE flash mode = log attached
2nd = i used Normal flash mode the force close is gone but it stop at 5% when flashing the kdz and say connect the phone to pc and it is connected and it is there in device manager and every thing is ok and i have latest drivers
what i did = 1. used cdma and 3GQCT mode no change
2. i have all drivers installed right and the phone read right because i own LG G2 D802 and i use the flash tool a lot
3. connect and disconnected the phone a lot in 2nd try but no effect
3. i try to do hard reset but no effect it just restart and stuck at lg again
4. i cant find any other thread with same problem that i can find
I need help for my old LG E440
Thanks in advance
and sorry for my bad English
View attachment Log2.txt
No one can help ?
Hi, thank you for using XDA Assist. There is not much activity on XDA about your device. But see if someone in this thread can help, http://forum.xda-developers.com/showthread.php?t=2775750&page=14
help
I have Lg e440 = LG L4 II
i was using it one day like a week a go then it booted into hard reset mode and started doing it and restarted and stuck at lg logo from that time
I used LG flash tool 2014 to flash kdz V10F_00 UAE and the tool force close after kdz extract that is in CSE flash mode = log attached
2nd = i used Normal flash mode the force close is gone but it stop at 5% when flashing the kdz and say connect the phone to pc and it is connected and it is there in device manager and every thing is ok and i have latest drivers
what i did = 1. used cdma and 3GQCT mode no change
2. i have all drivers installed right and the phone read right because i own LG G2 D802 and i use the flash tool a lot
3. connect and disconnected the phone a lot in 2nd try but no effect
3. i try to do hard reset but no effect it just restart and stuck at lg again
4. i cant find any other thread with same problem that i can find
I need help for my old LG E440
Thanks in advance
and sorry for my bad English
http://dl-1.va.us.xda-developers.com/3/3/3/2/9/8/7/Log2.txt?key=wpadtwlOpunqazL_YrY-eg&ts=1432857652
Related
ok so i was using kdz updater to flash my rom on my phone set mode to 3GQCT Phone mode DIAG and my phone is in emergency mode so then i hit launch software update while flashing see some dll msg error's and stuff meanwhile its done and it rebooted my phone then i look at my phone and i see its stuck on lg screen and white flashing screen tried taking out the battery and put it back in no luck tried holding downvolume+home+power still no luck tried flashing again still no luck im using V10F_00.kdz for stock rom btw plz help
Model?
ayman244 said:
ok so i was using kdz updater to flash my rom on my phone set mode to 3GQCT Phone mode DIAG and my phone is in emergency mode so then i hit launch software update while flashing see some dll msg error's and stuff meanwhile its done and it rebooted my phone then i look at my phone and i see its stuck on lg screen and white flashing screen tried taking out the battery and put it back in no luck tried holding downvolume+home+power still no luck tried flashing again still no luck im using V10F_00.kdz for stock rom btw plz help
Click to expand...
Click to collapse
Is it the Dual sim L3-e405 or the singles sime L3-E400?
have you installed the the driver?
try to use phone mode to emergency mode. I forgot all the options since I only have the e405 3 months ago. Hope it helps, and maybe you could try to use OS with higher version, if you are using windows xp be sure it is sp3.
i have lg optimus l3 e400 and im running windows 7 i didnt delete the current rom when i wanted to update is that ok? or bad tried emergency as phone mode didnt work
problem solved it turned out that i didnt pay attention to the rom i downloaded was for e405 so now i downloaded one for e400 and it worked
Please help me to fix my
LG LU6200 i flashed it with sphinx
but my stupid brother accidentally updated it via OTA.
please help me to fix it
I'm now stuck on CWM, i dont know what to do..
i've been working 14hrs for this.
The ICS engeneeer version and LG logo shows up and then after it will direct me to CWM Recovery
Kindly
install original kdz.....it will make your phone workable...but custom roms will have same problem so now don't install cwm after installing original kdz
1-Download+ install LG driver www.lg-phones.org/lg-optimus-lte-usb-driver.html
2- Download LG official ROM (kdz)
main.develoid.com:82/lg/Optimus%20LTE/LG-LU6200/Stock%20Firmware/LU620187_00.kdz
main.develoid.com:82/lg/Optimus%20LTE/LG-LU6200/Stock%20Firmware/
3-Download and install LG update csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
4- Download Flash Tool and extract dl.dropbox.com/u/43909377/FlashTool.1.0.54.zip
5- Run Windows Enabler (from extracted files) and switch it on by clicking on it's icon in system stray in task bar
6- switch off your phone....now hold volume up + power key ....it it gets into download mode
7- Run the Uptextex.exe (from extracted files)
select the LG Official ROM (kdz) you want to install (WARNING : wrong KDZ File will brick the phone)
Select "emergency" and "3gQCT" as the figure and then click on the "NORMAL WEB UPGRADE
Select " Normal Web update test"
WAIT AND ENJOY
Caution: I am not responsible if anything happens to your PHONE........ Do this at your own risk!
Hey thank you i just followed the instructions and it worked well im now running with sphinx v4 but now having trouble using wifi tetherinh i tried to open it, it will start for like 2 seconds and then will turn off again i tried to use 3rd party app but its saying this
Sent from my LG-LU6200 using XDA Premium 4 mobile app
lg lu 6200 stucks when room start
can u please help me
my lg optimus lu6200 restarts after the cynorgen mode
Hey guys. when I click on Normal Web Upgrade Test. It opens up the LG Mobile Support Tool and NOT asking me the country or model or anything.
Hence I'm stuck completely. The support tool asks me to update the drivers. I can't proceed no matter what. What am i doing wrong here??
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
Have you tried the LG PC Suite? I found it very useful several times for getting out of a mess on my old G2.
Be careful! When I performed a factory reset on my G Pro 2 my external sd card got wiped.
Sent from my LG-D802 using XDA Premium 4 mobile app
help
Hi Vishesh,
Were you able to recover your phone?If yes then please help me getting out of a bootloop
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
I flashed my phone yesterday (bootloop) with this tutorial http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
Use this modded tools to flash your KDZ file
choose 3GQCT for Type
CS_EMERGENCY for PhoneMode
select your KDZ
put your phone to DOWNLOAD MODE then press Normal Flash, it takes about 12 mimutes to finishs
A factory reset is recommended
Link : http:// w w w.mediafire.com/download/mc2wmpdjt38sdr8/LG+Flash+Tool+2014.rar
Credit go to oringinal author
LG G Pro2 D838 bootloop
My LG G Pro2 D838 model keep looping it isn't giving me enough time to hard reset or to change the ROM it just keep boot looping every 5 + seconds and when i plug it in to charge it just keeps looping over and over again without seeing the charging light appearing
Same problem here with my F350L !!!
My phone got stuck at 90% while flashing. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. I can not go to download mode, either. My phone now is on a 'bootloop" mode.
Any help from our Masters out there on how I can fix this bootloop issue?
TIA.
Note: On Lollipop F350v20f
---------- Post added at 11:06 AM ---------- Previous post was at 10:46 AM ----------
gunlock4real said:
Use this modded tools to flash your KDZ file
choose 3GQCT for Type
CS_EMERGENCY for PhoneMode
select your KDZ
put your phone to DOWNLOAD MODE then press Normal Flash, it takes about 12 mimutes to finishs
A factory reset is recommended
Link : http:// w w w.mediafire.com/download/mc2wmpdjt38sdr8/LG+Flash+Tool+2014.rar
Credit go to oringinal author
Click to expand...
Click to collapse
Can't go to download mode as my phone F350L is no longer detected by my PC after it went bootlooping non-stop.
Is there any other better way?
TIA.
Dear friends,
I am in deep trouble. Few days ago I have flashed CM rom on my LG G3 F400L. Now the problem is after waking up today I find my set totally dead. I can't enter into recovery mode with holding buttons. The phone stucked into LG logo. Tried many times to flash with LG flash tool. But it says download fail, device model is different.Check ur phone or dll. Tried generic dll but not working. Any help will be much appreciated. Thanks.
How can i fix this? Need help
Flash again using LG Flash Tool, use D838 international version of Lollipop stock rom
Go to 'Download Mode'
Set the flash tool to CDMA+Emergency
Make sure you do everything OFFLINE
My phone got stuck at 90% while flashing D838 ROM. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. My phone now is on a 'bootloop" mode. And I can no longer go to Download mode so I can flash anew.
Any help from our Masters out there?
TIA.
profeduards said:
My phone got stuck at 90% while flashing D838 ROM. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. My phone now is on a 'bootloop" mode. And I can no longer go to Download mode so I can flash anew.
Any help from our Masters out there?
TIA.
Click to expand...
Click to collapse
Take a look at my thread for LG V20, read fastboot tutorial in particular. Most knowledge on my thread applies to LG-D838 which I own too. Just change things accordingly. For instance, instead of LG UP tool use LG Flash tool.
Once you read the articles, you would be your own master. Good Luck.