hello
i face a major problem in my lonovo s920 mobile. where i am trying to install new os in my phone before its compeletelly working,
but after installing CWM recovery i do hard reset ,cache reset and dalvik reset also than after i select the ROM zip its install successefully but its stop at the lenovo logo its not procedded after that i also go to service center but they told me its motherboard problem so what can i do plzz help me.
hitendra002 said:
hello
i face a major problem in my lonovo s920 mobile. where i am trying to install new os in my phone before its compeletelly working,
but after installing CWM recovery i do hard reset ,cache reset and dalvik reset also than after i select the ROM zip its install successefully but its stop at the lenovo logo its not procedded after that i also go to service center but they told me its motherboard problem so what can i do plzz help me.
Click to expand...
Click to collapse
Before ROM installation, did you do the required wipes with CWM recovery? You should most likely wipe dalvik, cache, system, and data. Then flash your ROM.
Evolution_Tech said:
Before ROM installation, did you do the required wipes with CWM recovery? You should most likely wipe dalvik, cache, system, and data. Then flash your ROM.
Click to expand...
Click to collapse
i have done every steps carefull also a rom get install successfully but its hang on lenovo logo,
hitendra002 said:
i have done every steps carefull also a rom get install successfully but its hang on lenovo logo,
Click to expand...
Click to collapse
Please link me to the ROM you installed.
Evolution_Tech said:
Please link me to the ROM you installed.
Click to expand...
Click to collapse
http://androidxda.com/download-lenovo-stock-rom-models
i also try a another rom but they sho me status 7 error during installation.
Related
HI,
installed colour os v 2.1 and now device not booting up. stuck on boot screen . plz help !!! steps that i've followed mentioned below. plz let me know if i've don anything wrong.
was on stock rom v2
1. installed CWM using sp flash
2. did - wipe data
3. did- wipe cache
4. did - dalvik wipe from advanced menu
5. did - format / system from mounts and storage menu
6. installed zip file - Color os Ota Fix_2.1.zip
7. did wipe data and wipe cache again
8. installed - color os V.2.1.zip
setup finished fine , but after restarting, saw the color Os logo n that's it, nothing else. please let me know if 've done anything wrong on my steps. i can still access CWM though. so i installed stock rom using the backup i've taken and it's working fine
thanks
pi_asif said:
HI,
installed colour os v 2.1 and now device not booting up. stuck on boot screen . plz help !!! steps that i've followed mentioned below. plz let me know if i've don anything wrong.
was on stock rom v2
1. installed CWM using sp flash
2. did - wipe data
3. did- wipe cache
4. did - dalvik wipe from advanced menu
5. did - format / system from mounts and storage menu
6. installed zip file - Color os Ota Fix_2.1.zip
7. did wipe data and wipe cache again
8. installed - color os V.2.1.zip
setup finished fine , but after restarting, saw the color Os logo n that's it, nothing else. please let me know if 've done anything wrong on my steps. i can still access CWM though. so i installed stock rom using the backup i've taken and it's working fine
thanks
Click to expand...
Click to collapse
see the Color os thread... have you followed the steps correctly?
4821
abhimanyu bajaj said:
see the Color os thread... have you followed the steps correctly?
Click to expand...
Click to collapse
yes i followed all the steps. i was able to install CM11 without any issue. but was not able to install colours os, AKSHI OS roms...
is there anything missing on my steps?
pi_asif said:
yes i followed all the steps. i was able to install CM11 without any issue. but was not able to install colours os, AKSHI OS roms...
is there anything missing on my steps?
Click to expand...
Click to collapse
as hridayHS said.... did you increase system partition?
First flash cwm partition patch (880mb or 1gb)
do this step
format data
format cache
wipe dalvic
flash color os v.2.1
reboot to recovery by (choosing from advanced menu)
wipe data,cache,dalvik reboot
setup rom etc..
Go to recovery flash both ota
[email protected] said:
First flash cwm partition patch (880mb or 1gb)
do this step
format data
format cache
wipe dalvic
flash color os v.2.1
reboot to recovery by (choosing from advanced menu)
wipe data,cache,dalvik reboot
setup rom etc..
Go to recovery flash both ota
Click to expand...
Click to collapse
hi,
thaks for the help, installed successfully, but now network is not working. can help me with that? tried restarting. no luck.
wil get fixed if i do reinstall?
pi_asif said:
hi,
thaks for the help, installed successfully, but now network is not working. can help me with that? tried restarting. no luck.
wil get fixed if i do reinstall?
Click to expand...
Click to collapse
oops.. it was the imei problem, fixed, thanks
abhimanyu bajaj said:
as hridayHS said.... did you increase system partition?
Click to expand...
Click to collapse
Can you tell me .. How to increase system partition ??
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Worpe said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
If you have a flashing tool then flash the stock firmware again and then give it a try.
Hit Thanks if it helped
Sent from my titan using XDA-Developers mobile app
pg8286 said:
If you have a flashing tool then flash the stock firmware again and then give it a try.
Hit Thanks if it helped
Click to expand...
Click to collapse
Ive tried that 4 times till now. It has been in a bootloop thrice. And I flashed stock. I currently am using stock firmware but want to flash the custom rom. The recovery is failing to wipe data because it is failing to mount data.
Worpe said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
Try this
1. Reboot to recovery (TWRP)
2. Select wipe.
3. Select advanced wipe.
4. Check system.
5. Repair or change file system.
6. Select change file system.
7. Select format type.
8. Swipe to change.
9. Select repair.
there is one problem with stock rom. its encrypts the data partition right after installing stock rom, therefore twrp can't access data partition. i had similar problem earlier. this is how i managed to fix.
solution: http://forum.xda-developers.com/showpost.php?p=67980158&postcount=7
i suggest you to stick with stock rom, because right now whatever roms or recoveries are made for this phone are blindly ported (just copy paste roms). i have tried about 3-4 roms for this phone, all had major bugs especially battery related. there is only one developer who made a stable rom so far is beingtejas, search his thread. if you really want to use a custom rom, try THIS rom made by gaurav kesarwani with help of beingtejas that is why i am suggesting it you otherwise it didn't worked for me atleast.
Worpe said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
Use TWRP 2.8.7. 3.0.0 is a can of bugs...
optimumpro said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
Hey You should have to try doing these steps these will helps you-
1.First after wiping cache and dalvik cache FLASH SUPER SU ZIP FILE
2.AFTER THAT FLASH THE ROM AND THEN REBOOT, it will solve the problem.
vickysoni said:
Hey You should have to try doing these steps these will helps you-
1.First after wiping cache and dalvik cache FLASH SUPER SU ZIP FILE
2.AFTER THAT FLASH THE ROM AND THEN REBOOT, it will solve the problem.
Click to expand...
Click to collapse
my internal storage is showing 0 i can download apps from playstore but can't download things from browser can't even take a screen shot
first wipe data and than goto advance wipe options and wipe all but do not wipe microsd
it is success full than install custom rom
can't mount data
I'm using cwm recovery, while factory resetting it can't
mount / data. Please help me.
Thanks
Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Sairaj3 said:
Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Click to expand...
Click to collapse
Is the ROM you are flashing made for your specific model number? Are you using the newest version of TWRP that you can find? Are you factory resetting, wiping cache and dalvik when you flash? Have you tried doing an advanced wipe in TWRP to wipe system partition and data partition and then flashing your ROM then wiping cache and dalvik after you flash?
Sent from my SCH-I535 using Tapatalk
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Sairaj3 said:
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Click to expand...
Click to collapse
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Sairaj3 said:
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Click to expand...
Click to collapse
To be thorough and make sure you miss nothing, I suggest these steps:
1)in TWRP, tap the Wipe button, then it should say at the top of the screen: "factory reset, wipe cache and wipe dalvik". Swipe the slider to do the wipe.
2)after wiping, tap the home button in TWRP, on TWRP home screen, tap the Wipe button again, then tap the advanced wipe option, wipe system and data.
3)tap home button, on home screen, tap install then flash your ROM and Gapps.
4)after flashing ROM and Gapps, wipe cache and dalvik(do not factory reset).
5)reboot.
Sent from my SCH-I535 using Tapatalk
im installing custom rom in my micromax a120.. i format dalvik cache, cache and mounts/storage to. then rom not installing it stuck on logo screen. i tried to flash stock rom but its also stuck on logo screen. please help me out.
ankurgiri65 said:
im installing custom rom in my micromax a120.. i format dalvik cache, cache and mounts/storage to. then rom not installing it stuck on logo screen. i tried to flash stock rom but its also stuck on logo screen. please help me out.
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
You have to do all required steps to flash custom/stock ROM.
1. Factory reset
2. Wipe System, Data, Cache/dalvik
3. Flash ROM
4. Reboot
FSadino said:
Hello and welcome to XDA-developers!
You have to do all required steps to flash custom/stock ROM.
1. Factory reset
2. Wipe System, Data, Cache/dalvik
3. Flash ROM
4. Reboot
Click to expand...
Click to collapse
i tried but not working....
Hello
I have marshmallow B560 and twrp_3.0.2 custom recovery on my MT7-TL09.
I tried to wipe it via TWRP recovery (I go to advanced wipe and choose dalvik+cache+data+internal storge+system), but after wipe, my MT7-TL09 was suspended on bootloop.
Now I have access to TWRP recovery menu only.
please help me
jalizi said:
Hello
I have marshmallow B560 and twrp_3.0.2 custom recovery on my MT7-TL09.
I tried to wipe it via TWRP recovery (I go to advanced wipe and choose dalvik+cache+data+internal storge+system), but after wipe, my MT7-TL09 was suspended on bootloop.
Now I have access to TWRP recovery menu only.
please help me
Click to expand...
Click to collapse
what you want to do....
you was wipe all and there's no os left on your device that's why it's on loop now you have to flash desire rom for your device you said you're on b560 try to flash Ale roms or chudy safynet pass rom...
fazi2015 said:
what you want to do....
you was wipe all and there's no os left on your device that's why it's on loop now you have to flash desire rom for your device you said you're on b560 try to flash Ale roms or chudy safynet pass rom...
Click to expand...
Click to collapse
thank u
But how can I flash rom while my device is on bootloop?
please explain more ...
jalizi said:
thank u
But how can I flash rom while my device is on bootloop?
please explain more ...
Click to expand...
Click to collapse
first when you boot into recovery make sure you swipe to customize system if asked if not go to mount and untick system read only then
download the rom I suggest 3.1.
https://forum.xda-developers.com/mate-7/development/ale95-kangvip-mt7-tl10-c00b571-t3479233
thanks to Ale
wipe all as you do and copy rom to your sd card then in recovery select install and choose the rom file flash it when flash complete wipe cach and dalvik cach then reboot first boot take 15-25min to bootup don't worry and keep it booting don't force off the device it's a part of installation.
hope it'll help you..
fazi2015 said:
first when you boot into recovery make sure you swipe to customize system if asked if not go to mount and untick system read only then
download the rom I suggest 3.1.
https://forum.xda-developers.com/mate-7/development/ale95-kangvip-mt7-tl10-c00b571-t3479233
thanks to Ale
wipe all as you do and copy rom to your sd card then in recovery select install and choose the rom file flash it when flash complete wipe cach and dalvik cach then reboot first boot take 15-25min to bootup don't worry and keep it booting don't force off the device it's a part of installation.
hope it'll help you..
Click to expand...
Click to collapse
thank u very much
In this situation is there possibility to flash an official ROMs on my device or not?
jalizi said:
thank u very much
In this situation is there possibility to flash an official ROMs on my device or not?
Click to expand...
Click to collapse
yes you can flash official one