Database Info

Android switch firmware rom asian to world (Lenovo P770)

Hi!
I have bought a Lenovo P770 with asian version firmware S127.
Is it possible to switch to a world version firmware wich suports google services?
What should I do to not brick my phone?
What version is the best?
Regards

MT65xx Preloader disappear after few seconds
When I try to prepare for flashing, I remove battery, usb, after I connect batteru, usb and it shows for a few seconds MT65xx Preloader device, but after it disappears and I can't see the device to update/change driver. I tried on 3 PCs with the same situation.
Can be that this phone is locked somehow?
please help
Regards!
ing_dritan said:
Hi!
I have bought a Lenovo P770 with asian version firmware S127.
Is it possible to switch to a world version firmware wich suports google services?
What should I do to not brick my phone?
What version is the best?
Regards
Click to expand...
Click to collapse

ing_dritan said:
Hi!
I have bought a Lenovo P770 with asian version firmware S127.
Is it possible to switch to a world version firmware wich suports google services?
What should I do to not brick my phone?
What version is the best?
Regards
Click to expand...
Click to collapse
I too have the same issue, want to switch to world rom from asian rom, if there is someone who could post a complete guide on how to install the world rom.
Regards

driver update
ing_dritan said:
When I try to prepare for flashing, I remove battery, usb, after I connect batteru, usb and it shows for a few seconds MT65xx Preloader device, but after it disappears and I can't see the device to update/change driver. I tried on 3 PCs with the same situation.
Can be that this phone is locked somehow?
please help
Regards!
Click to expand...
Click to collapse
its common, donot worry about it . first click on "mt65 ...preloader... queckly when its appears [2/3 seconds] then update driver ,as you download in ur pc and done.and install further action....[my english is bad]

Simple thing is just copy usbsr.sys to system32/drivers and ur phone ready to flash
Sent from my T1-E using Tapatalk

here is auto port tool for building recovery for p770 (mtk6577) http://forum.xda-developers.com/showthread.php?t=1825722

Sharp A1 / Z2 / FS8002

Dear Friends,
I've recently bought the Sharp A1 (LeEco Inside) and everything was running smooth until it feel on the ground.
The front screen is brooken!
I look everywhere for a replacement...even with SHARP tawain but no luck. No even in Aliexpress or ebay....I don't find parts for this phone anywhere.
Can someone provide some help?
Thanks in advance,
Sergio

Look ebay. Contact your local dealers and shops
Sent from my SHV-E210S using Tapatalk

[email protected] said:
Look ebay. Contact your local dealers and shops
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
I have done all off that....
No luck at all.
It's quite strange the lack of parts for this phone. I'm guessing that "Sharp" only gave the brand...but the hardware is from someone else.
I've already found out that the phone has the following names:
-Sharp A1
-Sharp Z2
-Sharp Aquos Z2
or even
FS8002.
Neverthless....i don't find lcd/digitizer/screen for it.
Thanks!

sasimoes said:
I have done all off that....
No luck at all.
It's quite strange the lack of parts for this phone. I'm guessing that "Sharp" only gave the brand...but the hardware is from someone else.
I've already found out that the phone has the following names:
-Sharp A1
-Sharp Z2
-Sharp Aquos Z2
or even
FS8002.
Neverthless....i don't find lcd/digitizer/screen for it.
Thanks!
Click to expand...
Click to collapse
Contact your phone manufacture
Sent from my SHV-E210S using Tapatalk

[email protected] said:
Contact your phone manufacture
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
I already have.
i've contacted "Commtiva Technology, Limited", the owners of Sharp and the makers of this model of phone in taiwan. And they answered...please contact SHARP Portugal (where I live).
Sharp in Portugal, kindly answered...."Sorry, we can't help, because we don't sell Sharp smartphones...only printers, and copiers...bla bla bla".

any help with an original sharp a1 firmware,or another firmware that can be installed on it?? i have same phone for 5 months and it begins to freeze from time to time for about 1 second,reseted to factory and worked fine for 2 days,then during the call i was hearing the sound of notification as i received messages,but no message arrived.reset again,all ok for a day,then freeze again. reset and ok for 3 days, and now i hear the same notification sounds, for couple of times during on a call. i want to put another android version if i can. now i have on it 6.0. i've tried to root it with all programs,not a chance. pls help. thx

Stock Firmware Download
Costi21 said:
any help with an original sharp a1 firmware,or another firmware that can be installed on it?? i have same phone for 5 months and it begins to freeze from time to time for about 1 second,reseted to factory and worked fine for 2 days,then during the call i was hearing the sound of notification as i received messages,but no message arrived.reset again,all ok for a day,then freeze again. reset and ok for 3 days, and now i hear the same notification sounds, for couple of times during on a call. i want to put another android version if i can. now i have on it 6.0. i've tried to root it with all programs,not a chance. pls help. thx
Click to expand...
Click to collapse
Checkout Sharp Mobile Taiwan...w.sharpmobile.com.tw/服務支援-z2

How to Root Sharp Z2?
How to Root Sharp Z2?
I have been search in google but nothing result.

ghopretz57 said:
How to Root Sharp Z2?
I have been search in google but nothing result.
Click to expand...
Click to collapse
Fastboot oem unlock and try flashing this https://drive.google.com/file/d/1XZdnNxF47kWY255igXlebuVIE9k26NpJ/view
msg me if it works and I will link you to Magisk that works for this model and the safetynet fix.

morgs640 said:
Fastboot oem unlock and try flashing this https://drive.google.com/file/d/1XZdnNxF47kWY255igXlebuVIE9k26NpJ/view
msg me if it works and I will link you to Magisk that works for this model and the safetynet fix.
Click to expand...
Click to collapse
not work...

ghopretz57 said:
not work...
Click to expand...
Click to collapse
WHats the problem?

morgs640 said:
WHats the problem?
Click to expand...
Click to collapse
I have been flash that twrp, but when i boot to recovery, it is still stock recovery.

ghopretz57 said:
I have been flash that twrp, but when i boot to recovery, it is still stock recovery.
Click to expand...
Click to collapse
Is your bootloader unlocked?

morgs640 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
Yes

ghopretz57 said:
Yes
Click to expand...
Click to collapse
When flashing recovery can u send me a screenshot of the cmd prompt after flashing? Or what does it say after flashing?

morgs640 said:
When flashing recovery can u send me a screenshot of the cmd prompt after flashing? Or what does it say after flashing?
Click to expand...
Click to collapse
The messages is:
Transfering OK
Writing OK
But when i boot to recovery, it is still stock recovery, not twrp.

Unbrick my phone?
OMG !
I own a sharp (fs8002) and playing around with it i was trying to root it, unlock the BL and install twrp so i can finally install a custom rom.
With not much info about this low supported phone, i used SP FlashTool and managed to erase everything from it. It is not responsive at all, i don`t see fastboot anymore , no revocery no nothing. SP Flashtool identify the device once plugged as mediatek usb port (com9) but i can not find anywhere the necessary files to UNBRICK it so to make it usable once again!
Is there someone who can help me revive and use this two months old phone ?

Sharp FS8002 stock rom
zeronavigator said:
OMG !
I own a sharp (fs8002) and playing around with it i was trying to root it, unlock the BL and install twrp so i can finally install a custom rom.
With not much info about this low supported phone, i used SP FlashTool and managed to erase everything from it. It is not responsive at all, i don`t see fastboot anymore , no revocery no nothing. SP Flashtool identify the device once plugged as mediatek usb port (com9) but i can not find anywhere the necessary files to UNBRICK it so to make it usable once again!
Is there someone who can help me revive and use this two months old phone ?
Click to expand...
Click to collapse
The stock rom at the Taiwan website (see my earlier post!) is an update-package. It contains a scatter-file that is not suitable for the flashtool...maybe someone can help with that. My guess is that it just does not have the proper format for flashtool. So someone should check that. The firmware seems to be complete, it's 2.1 Gigabyte. I applied the package via update from SD, it works:
Kernel-Version: 3.18.22+ Mon Sep 5 22:19:47 CST 2016
Build Number: NEXCNFN5801509051S release-keys

swrisch said:
The stock rom at the Taiwan website (see my earlier post!) is an update-package. It contains a scatter-file that is not suitable for the flashtool...maybe someone can help with that. My guess is that it just does not have the proper format for flashtool. So someone should check that. The firmware seems to be complete, it's 2.1 Gigabyte. I applied the package via update from SD, it works:
Kernel-Version: 3.18.22+ Mon Sep 5 22:19:47 CST 2016
Build Number: NEXCNFN5801509051S release-keys
Click to expand...
Click to collapse
I managed to download the update firmware file from taiwan website (TSP-1360-0-00WW-A03-update.zip) witch is a 1.92 gb file , but as you said the scatter file contained there is not recognized by SP Flash tool.
Is there a way to make a scatter file for fs8002 with a MT6797 chipset so i can proceed with the flashing ?

Sharp a1/z2 (fs8002) Stock rom via SPFlashTool
I am desperate.. Is there someone on this forum with this smartphone that can create a backup or has access and knowledge to Flash it with SPFlashtool ?
I managed to unlock bootloader, flashed a wrong recovery image and accidentally formatted bootloader and everything. The phone is not responding and i am unable to find anywhere the stock rom to flash it via SP Flash tool
I dont know what else to do..
HELP :crying:

New device : Gome K1

Hi,
I am a little new and don't really know about this subject but :
I purchased a new phone : a Gome K1.
This is not tablet but phone. This is a new brandt. This a MTK (MT6757).
For the story, it came to me with chinese ROM, all menus in chinese
I asked to the seller to give me a ROM with playstore and french. They done it.
I flashed their new ROM with a proprietary flash tool. Now I have a android 6 ROM with Playstore, french menus. Well !
But I'd like to know if there is a way to root it, and install a TWRP :
The ROM came with bootloader locked and no recovery. It is entirely blocked.
No way to unlock bootloader via the general way (fastboot oem unlock --> unknown command)
I read some articles that deal with spflashtool and porting TWRP, but I'm new to this and I don't think I will be able to make all these steps correctly to flash a TWRP ...
Does someone has an idea ?
Is my post on the good topic ?

Up, does someone have an idea of how to root it ?

Hello,i also have a Gome K1 phone and I am also interested at rooting it.
There is an ' OEM unlocking option' under the developers option in the settings, have you tried that yet?
If you managed to import twrp and rooted the phone can you pls send here the steps, Thanks

Hello, happy to not be alone with this phone ...
Yes I tried everything, after enabling unknown source, OEM unlocking and USB Debugging developer options :
- All root apks
- all existing root kits using ADB
- Method with a linux distro to access Phone filesystem as root ( cannot see my phone ... )
Now I'm trying to use SP flashtool last version, but even that cannot correctly access the phone to Readback my recovery : there is BROM error, so I think that phone is not compatible with the phone (seen on a forum ...)
So if someone has an idea, he is welcome
Inveds said:
Hello,i also have a Gome K1 phone and I am also interested at rooting it.
There is an ' OEM unlocking option' under the developers option in the settings, have you tried that yet?
If you managed to import twrp and rooted the phone can you pls send here the steps, Thanks
Click to expand...
Click to collapse

When I contacted them, they send me a non rooted custom ROM which embed Google Apps and All language, AND another flash tool.
This flash tool seems to be based on SP flash tool. It seems to have restrictions (no readback ability ...).
I'm not able to backup anything with this tool or with SP flash tool.
Whis spflashtool, when clicking ReadBack, I power off my phone, and plug USB cable.
It begins the process but I immediatly encounter a BROM error :
ERROR: status_brom_cmd_send_da_fail (0xC0060003)
I read a post which indicate to try to plug usb cable when pressing Power plus Volume Up, but I don't think it can work, because I know that their tool works without that operation.
So now I'm still stuck here. Does someone have an idea ?

Hi
On the Russian forum 4pda, the topic GOME K1 we are also discussing and trying to solve the problem of a locked bootloader. So far no results. ROOT is also not yet possible to get.
I've also ported twrp for GOME K1, but there's no point in installing it until the bootloader is unlocked. Otherwise we will get a brick.

Hi
In Developer options there is a setting to unlock bootloader, it's the third toggle down.
Hope this helps.

Amagram said:
Hi
In Developer options there is a setting to unlock bootloader, it's the third toggle down.
Hope this helps.
Click to expand...
Click to collapse
No, it's not working. This switch does not affect the boot loader state.

vsxby said:
Hi
On the Russian forum 4pda, the topic GOME K1 we are also discussing and trying to solve the problem of a locked bootloader. So far no results. ROOT is also not yet possible to get.
I've also ported twrp for GOME K1, but there's no point in installing it until the bootloader is unlocked. Otherwise we will get a brick.
Click to expand...
Click to collapse
Hello vsxby,
I was successful in flashing custom ROM that vendor uploaded for me.
So I thing I can flash just the recovery with their tool. I'm not an expert, so I'm just a little affraid to follow a guide to port a TRWP for Gome K1 and try to flash it, since it can brick the phone.
If you want, I can't send you a copy of their tool they sent to me (SPMultiPortFlashDownloadProject.exe) ...

z2x said:
Hello vsxby,
I was successful in flashing custom ROM that vendor uploaded for me.
So I thing I can flash just the recovery with their tool. I'm not an expert, so I'm just a little affraid to follow a guide to port a TRWP for Gome K1 and try to flash it, since it can brick the phone.
If you want, I can't send you a copy of their tool they sent to me (SPMultiPortFlashDownloadProject.exe) ...
Click to expand...
Click to collapse
Thank you, but I already have this tool. As I wrote before flashing TWRP we need to unlock the bootloader. While this is not impossible to do. But one of our users on 4pda is going to ask the manufacturer to unlock bootloader. In case of success, I will inform you.
If you want to experiment and flash TWRP with a locked bootloader, I can give you the TWRP I made, but I warn you, it's not safe.

Bro,Can you upload the firmware and tools to google drive or something like? It will be very helpful for dealing with this mediatek replica phone(aus6757_66_m),i got some possible factory test MTK AOSP,but the link expires ：（

@Vortex said:
Bro,Can you upload the firmware and tools to google drive or something like? It will be very helpful for dealing with this mediatek replica phone(aus6757_66_m),i got some possible factory test MTK AOSP,but the link expires ：（
Click to expand...
Click to collapse
It's link GD to multi firmware and tool

vsxby said:
Thank you, but I already have this tool. As I wrote before flashing TWRP we need to unlock the bootloader. While this is not impossible to do. But one of our users on 4pda is going to ask the manufacturer to unlock bootloader. In case of success, I will inform you.
If you want to experiment and flash TWRP with a locked bootloader, I can give you the TWRP I made, but I warn you, it's not safe.
Click to expand...
Click to collapse
Ok, hope manufacturer will accept to give bootloader unlock procedure

z2x said:
Ok, hope manufacturer will accept to give bootloader unlock procedure
Click to expand...
Click to collapse
We were unable to contact the manufacturer and the moderators of the official GOME forum do not have this information. At the moment, there are no solutions to this issue.

z2x said:
Hello vsxby,
I was successful in flashing custom ROM that vendor uploaded for me.
So I thing I can flash just the recovery with their tool. I'm not an expert, so I'm just a little affraid to follow a guide to port a TRWP for Gome K1 and try to flash it, since it can brick the phone.
If you want, I can't send you a copy of their tool they sent to me (SPMultiPortFlashDownloadProject.exe) ...
Click to expand...
Click to collapse
could you please post here what is the procedure you took to flash the rom. Seller sent me with multi language rom. i want to downgrade the rom to its original one. I used your tools in the windows 10 lap. and also in the windows 7 lap but it was useless. I am going to try the procedure in the windows 8.1 lap. can you tell me exactly how you flash your phone with that tool ?

Hey Bro,
I get my new Gome K1 with Global ROM
but have some issues with my new Gome K1 >> the GPS doesn't work proper for Google Maps / Waze, it doesnt show accurate position most of the time, but it seems work well with "offline GPS" (but offline GPS most of the time not able to find location that I ahead for meeting). Any recommendation/solution?
Thanks in advance

Hi, is there any modem file for this phone ? MDDB....

original eom (china rom).
Hello every one i buy thise phone and come with multilanguage firmware but i like the origin one, can anyone help me the link of the firmware of origin!!

vsxby said:
We were unable to contact the manufacturer and the moderators of the official GOME forum do not have this information. At the moment, there are no solutions to this issue.
Click to expand...
Click to collapse
After some time ... is there any news about his root? I wouldn' t like to change the rom, but just do the root thing would be useful ..... tks

i've disabled the google app in the settings and now the phone is stuck on boot logo... any ideas how to fix this?
---------- Post added at 06:51 PM ---------- Previous post was at 06:30 PM ----------
driska said:
i've disabled the google app in the settings and now the phone is stuck on boot logo... any ideas how to fix this?
Click to expand...
Click to collapse
found the answer on 4pda, can't post link.

Xperia 10 - kernel + root

Boot.img For Xperia 10 I31XX and I41XX variants.
I31XX Variants
DOWNLOAD:
STOCK
I41XX Variants
DOWNLOAD:
STOCK
For root you need install magisk manager and patch boot.img via magisk .
Next step is easy : Install drivers and use flashtool or fastboot to flash patched boot.img .
Good luck .
FLASHING:
For flash you need :
1.Unlocked bootloader (warranty to be not void)
2.ADB i FASTBOOT
3.Drivers for your device (try to install drivers from flashtool. Win10 users must disable drivers signing.)
If you like my work , please press Thanks
If you want to buy me a coffee for my work you can use PayPal Thanks
https://paypal.me/marek10747
My Facebook group :
Facebook support group , for all devices !!
I do TWRP soon for this device . At this moment I don't have this device !!
This kernel I do for xperia 10 , but I patch this kernel manually !!
This kernel is from flashtool , I only unpack it manually without use flashtool , because flashtool don't support unpacking this files now .[/B]​
XDA:DevDB Information
XPERIA 10 - KERNEL, Kernel for the Sony Xperia 10
Contributors
MAREK10747
Kernel Special Features:
Version Information
Status: Stable
For: I31XX , I41XX
Base: 53.0.A.4.X
Created 2019-04-10
Last Updated 2019-04-10

This kernel will to be working possibly with I41XX devices . Please test dear user and comment it here .

Thank you
download link for I41XX Variants does not work

BiaBertK said:
Thank you
download link for I41XX Variants does not work
Click to expand...
Click to collapse
I'm know This links is disable to moment of my finish work with this kernel . Soon I do boot.img and I add this link

I unlocked the bootloader 3 weeks ago. Beyond that, I've had a hard time making any other progress. Kinda worried to take risky steps since barely anyone has this phone. I feel all alone in the in the rooting community with this device ?

bluelemonzz said:
I unlocked the bootloader 3 weeks ago. Beyond that, I've had a hard time making any other progress. Kinda worried to take risky steps since barely anyone has this phone. I feel all alone in the in the rooting community with this device
Click to expand...
Click to collapse
Don't worry . I don't have device But I do special kernel for this device . I say you only one question : soon maybe users buy this device . I support only xa1 but few years ago I support e5 . This devices have too small users , on last two devices I'm only one dev what do system's for this devices

MAREK10747 said:
Don't worry . I don't have device But I do special kernel for this device . I say you only one question : soon maybe users buy this device . I support only xa1 but few years ago I support e5 . This devices have too small users , on last two devices I'm only one dev what do system's for this devices
Click to expand...
Click to collapse
Hello. Well thank you for helping myself and others with this device. A Sony device is very new to me. I usually would use the stock kernels on HTC and Samsung phones, but I know it's different with these devices. If you get a working kernel, could you give instructions how to install.. Thank you

bluelemonzz said:
Hello. Well thank you for helping myself and others with this device. A Sony device is very new to me. I usually would use the stock kernels on HTC and Samsung phones, but I know it's different with these devices. If you get a working kernel, could you give instructions how to install.. Thank you
Click to expand...
Click to collapse
All is in the thread

I downloaded the boot.img and boot.magisk.img files. I'm not sure what to do to install it via adb. I have a I31XX Variant

bluelemonzz said:
I downloaded the boot.img and boot.magisk.img files. I'm not sure what to do to install it via adb. I have a I31XX Variant
Click to expand...
Click to collapse
For install you need adb and fastboot
adb and fastboot drivers
drivers for your phone
cable
brain
time
Know/How about fastboot commands Sometimes you can try to use flashtool for install boot .

Probably a silly question as I haven't used Android until recently since 2009, but how do you know whether your device is I31XX or I41XX?...

monokrome said:
Probably a silly question as I haven't used Android until recently since 2009, but how do you know whether your device is I31XX or I41XX?...
Click to expand...
Click to collapse
Settings -> System -> About the phone -> Model

any method to root I41XX variant?

Phone Corrupted
My phone was corrupted when I installed the .bin file using FlashTool. Any advice on how to restore it?
---------- Post added at 02:50 AM ---------- Previous post was at 02:25 AM ----------
Also opening the official Sony Flash Program (Emma) yields a "No Matching Services" error, with the code: 19be779c-f8da-46e6-b8c3-eff31b39b980

Is there someone who tested? Want to do it, but without actually bricking a phone :V.

BlueWizzard said:
Is there someone who tested? Want to do it, but without actually bricking a phone :V.
Click to expand...
Click to collapse
I would recommend waiting for full support from FlashTool and TWRP before attempting this. At this point if the phone is bricked the only possible way to recover the firmware is to manually re-flash each individual file in the firmware .ftf, and I have not tested that yet.

When can we expect the I41xx variants links?

The only way to currently recover a bricked Xperia 10 is to use NewFlasher (https://forum.xda-developers.com/cr...ress-newflasher-xperia-command-line-t3619426) and XperiFirm (https://forum.xda-developers.com/cr...perifirm-xperia-firmware-downloader-t2834142)

Can anyone please test if this works and is safe to install?

If anyone wants to test, and make sure their phone doesn't get bricked, use ./flashboot boot <<boot image>>

Custom ROM for Wiko View 2 Plus

Hello forum folks,
I am a newbie to this forum. My only experience is putting a custom ROM on ar phone, so I knew a few basics.
I have a few questions about one device... Wiko View 2 Plus.
Because this phone is not too old there are no custom ROM's available. When do custom ROM's usually start to appear for less popular devices like this one? Do they appear at all?
Also, it I tried to boot into bootloader/fastboot. It seems to be blocked on this device. I tried a few methods from the internet to unlock it, (yes, my OEM is unlocked, USB debugging is on, etc.) but I did not succeed to enter this mode at all. I even replaced the new update by installing an older firmware version. But it didn't change things.
Since this is not possible, I have another question. Can one modify the original ROM (which extracts during the WIKO setup to set back the device to facotry reset) an make this ROM custom? And then install this custom ROM with the official setup?
Can you also modify a downloaded android update before installing it?
Thanks in advance.

Bump

Have you found a solution?
I can't find a good twrp for the Wiko View 2 Pro, any idea?