Database Info

[STOCK ROM][LB] Huawei Ascend P2 - B021

I've finally managed to find another copy of the stock Ascend P2 firmware [P2-6011V100R001C00B021]
Flashing is easy, just copy the dload folder to the root of your internal memory and use the system update app to apply a local update.
The ROM can be rooted using eRoot.
More tweaks and other mods for this rom will follow soon.
Downloads:
P2-6011V100R001C00B021
eroot v1.3.3

Thank you Angelbob! I can finally have the B021 update

Very cool I assume I can flash it even if I've removed some of the stock Apks from my current rom?
By the way there's a p2tools apk on the server- Whats it for?

Mine fails to update, after the system reboots in the Android recovery system.
Fails to mount E: /SDcard. Runs through the "checking module" stuff, and after Checking module Cust it writes Huawei SD card update fail..
and continues
cust copying files...
copy cust files successed!
and then the huge
FAIL.
I'm probably doing something wrong but what could it be?

Try a factory reset first
Sent from my C6603 using Tapatalk

How well does this ROM work?
EDIT: I also cannot get this ROM installed.
Could it be because I am already running BO25?
I tried factory resetting as you suggested to the other person, it made no difference.

Tried factory reset also, made no difference

Mine updated fine.
I thought this would remove the silly operator logo that comes up when i turn on my phone and remove all the apps installed by the operator, but it's all still there.
Is this just a 'kernel' update or am i missing something here?
Thanks.

Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007...

HI
anyone had success in flashing this on P2 which locked to 3 UK network?

the same for me !!
The same : "Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007... "

Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!

same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?

Mabe new update !!!
xixorro said:
same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?
Click to expand...
Click to collapse
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:

davide_94 said:
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:
Click to expand...
Click to collapse
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?

xixorro said:
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?
Click to expand...
Click to collapse
the update zip is mixed with the huawei p6 omni rom based on 4.4.4.
but i get error during install the zip.
error status 6

_wolfpup said:
Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!
Click to expand...
Click to collapse
You ought to try this method to downgrade your ROM.
1) your P2 must have root access;
2) find in the "default.prop" file (you'll find it in the "/" directory) and change "B025" to "B020" for example:
ro.confg.hw_bootversion=P2-6011V100R001C00B025...
3) find in the "build.prop" file and change all "B025" to "B020" for example:
ro.confg.hw_systemversion=P2-6011V100R001C00B025_SYSTEM
ro.build.display.id=P2-6011V100R001C00B025
ro.build.version.incremental=C00B025
ro.build.description=P2-6011-user 4.1.2 HuaweiP2-6011 C00B025 ota-rel-keys,
ro.build.fingerprint=Huawei/hwp2-6011:4.1.2/HuaweiP2/C00B025
ro.product.CustDVersion=B025 (here can be any other values, these are only for example).
Having changed all the above-mentioned values, you will be able to downgrade your B025 ROM to B021. Just remember, that a ROM version in the edited "default.prop" and "build.prop" must be lower than a ROM version which you want to downgrade to.
Good luck!

Android 4.4.2 Omni Rom successfully installed
l0l0l0 said:
still no custom rom for this device
Click to expand...
Click to collapse
History
At the first time i tried to build my own custom Rom Mixed with the Huawei P2 + Huawei P6. After installing my own rom my Huawei P2 system was death.
After i tryed a lot of hours to fix it but nothing helps.
All partitions were lost. I tryed to install the stock recovery and update the phone using Update.app. ( But didnt work)
i tryed really all things. but nothing works. Only one thing.
Step by Step Instruction:
Follow the instructions on your own risk
1- Download the B510 Update for the huawei P6 ""Download""
2- Download the Huawei Update extractor ""Download""
1. In Profiles Select Huawei P6
2. Choose the Update file that you have downloaded.
3. Mark
- system.img
- userdata.img
- cust.img
- boot.img
4. Right click on a market line and select "create flashable zip"
3- Download this Openrecovery ""Download""
4- Download ADB And Fastboot ""Download""
5- Extraxt the Adb/Fastboot zip file In a folder
6- Copy the recovery.img in the same folder
7- Open the folder and press "shift" + "right-click" on a free place in the folder select "Open command window here"
8- Make shure Usb Debuging is enabled and connect your phone with the PC
9- type "adb reboot bootloader"
10- type "fastboot flash recovery recovery.img"
11- type "fastboot reboot"
12- during startup press "power" + vulume-up + volume-down" at same time and wait for the recovery
13- Select "wipe" "swipe to factory reset"
14- Select "wipe" "format data"
15- Select "advanced" "adb sideload" "swipe to start sideload"
16- move youre flashable zip into the same folder (like recovery.img)
17- Open command window (Step 7-)
18- type "adb sideload "your-zip-name".zip
19- now the install beginn and you have the P6 Firmware installed (Dont try to reboot your Phone it dosnt work)
20- Download Omni Rom and Gapps ""Homade Rom Download"" ""Stable Omni Rom 4,4,2 Download"" ""Gapps Download""
21- Firs install the Homade Version (same like step 1
22- now install the Stable Omni Rom 4,4,2 (same like step 1
23- wipe cache and dalvik
24- install Gapps (same like step 1
25- wipe cache and dalvik
26- Congratulation You Have now a Huawei P2 Phone with The Huawei P6 Firmware And Omni Custom Rom 4.4.2
Follow the instructions on your own risk
Please Give me a feadback if it work.:good:
Say thanks If it work :good:
Knowed Issue:
Phonespeaker works only after plugin a headset and unplug.....

I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp

jdcrispe95 said:
I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp
Click to expand...
Click to collapse
go to original Post ==>
There is all things updated

[Q] How to sign files so that they work in Android System Recovery 3e

Hello Guys
I am new to android so please correct my mistakes and i will try to give every detail as possible.
I am having Genx tablet GX pad 300 (It is rooted). By mistake i left my tablet as home and my small brother tried to unlock it. As it was password protected so after 15 failed failed attempts, it got hard locked and Asked for my Gmail ID and PASSWORD to unlock. BUT my wifi was disabled so i was not able to reset it.
An other method was to use ADB and bypass the Password, but The usb debugging was disabled so it didnt worked either
thirdly I saw a method (on XDA) to use Recovery mode to flash AROMA Filemanager and delete the files that were related to the password.
​Now the real problem begins so please cross your fingers.
First i copied the 'aroma file manager" .zip file in external sd card. the file is in the attachment and here is the link to its XDA page, click here
First i booted my device into the Recovery mode and seleted the the option "Apply update from external sd" and selected the update file (.zip format). It gave me error
E Signature verfication failed
Installation aborted
I had Android System Recovery 3e
I did a five hour research and came to know that it is security in android system recovery 3e to reject unofficial installation, i came to know that if i have to fix these errors the either i have to flash a Custom rom like CWM or a MODDED Android system recovery 3e which allows the installation of unofficial apps. the problem is that there is now Custom CWM for my device and i dont know how to make one from the source code. Secondly they have to be installed by ADB but i cant acess my device locked. I also found that sometimes we try to flash a new recovery form within a recovery it may brick the device. i also found that the updates that can be flashed by android system recovery should be named Update.zip and should be officially signed.
I know that there are many methods and apps to sign the .zip files so that they are accepted by the Android system recovery 3e.
i came across apps like zipsigner and signapktic both of them are available on google play. I also used used manual method to sign the aroma filemanager .zip file but every thing i tried it gave me the E signature verification error installation aborted.
My Question is this that how to Sign files so that they are accepted in the ANDROID STOCK RECOVERY 3e
Please keep it simple as possible.:good::laugh:

Download APKManager (5.1). Extract it, copy your zip to ./other/ folder, run cmd.exe, change directory to ./other/ then sign using following command in cmd.exe:
java -jar signapk.jar -w testkey.x509.pem testkey.pk8 your-rom.zip signed.zip.

~It does not require internet connect connection..you can sign in to google account without internet~

Me too!
I have the same problem and can not find an answer for my life! I really need something that can sign the zip for the stock recovery!

do not recognize the command

[GUIDE] [How To] Install Xposed in Yuphoria

Requirements:
1. Rooted Yuphoria phone
2. Flashed with any custom recovery like TWRP or CWM (I haven't tried using CWM)
Steps:
1. Download Xposed Framework ZIP file from here: [OFFICIAL] Xposed for Lollipop/Marshmallow [Android 5.0/5.1/6.0]
(Click here for Unofficial Systemless Xposed)
For MiUI ROM, check this out: [UNOFFICIAL][5.0/5.1/6] Xposed for MIUI by SolarWarez
Important Note:
The First Yuphoria (YU5010) is arm64 architecture..
The later Yuphoria Pure Stock Android (YU5010A) is arm (32bit)
This thread is for Yu Yuphoria only. For other devices, Check build.prop's ro.product.cpu.abi to find whether arm/arm64/x86
Marshmallow (Android 6.0.x) or CM13 based ROMs are sdk23
Lollipop (Android 5.1.x) or CM12.1 based ROMs are sdk22
Lollipop (Android 5.0.x) or CM12 based ROMs are sdk21
Correspondingly, download the xposed-vXX-sdkYY-architecture.zip file..
(XX represents the current version, which is subject to change)
2. Place it in Internal Storage of phone and boot into custom recovery.
3. Now flash the zip file and reboot the phone..
(The device will take around 5 minutes to boot up since the dalvik cache is cleared during flashing)
4. Download and Install the app XposedInstaller.apk from: Xposed Installer Material Design
That's it!! Xposed Framework is Installed in your phone.
You can now start using your favorite Xposed modules (apps).
Note:
If you face bootloop, wait for 5-10mins to ensure it's a bootloop..
If yes, just flash the uninstaller.zip to remove Xposed..
Credits:
@rovo89 for the wonderful Xposed Framework
@vishal_android freak for TWRP
@DooMLoRD for CWM
Hit the Thanks button if it worked

Will try this... Tnx for sharing
Sent from my Yu Yuphoria
Read my thread EXTREME BATTERY BACKUP FOR YUPHORIA [GUIDE]

not working
GokulNC said:
Requirements:
1. Rooted Yuphoria phone
2. Flashed with any custom recovery like TWRP or CWM (I haven't tried using CWM)
Steps:
1. Download Xposed Framework ZIP file from here: Xposed for Lollipop [Android 5.0/5.1] (See attachments there)
Important Note:
For CM13 or any CM13 (6.0.x) based ROM, download the file named xposed-vXX-sdk23-arm64.zip from there
For COS 12.1 or any CM12.1 (5.1.x builds) based ROM, download the file named xposed-vXX-sdk22-arm64.zip from there
For COS 12 or any CM12 (5.0.x builds) based ROM, download the file named xposed-vXX-sdk21-arm64.zip from there
For pure Lollipop 5.1 (32bit), download the file named xposed-vXX-sdk22-arm.zip
(XX represents the current version, which is subject to change)
2. Place it in Internal Storage of phone and boot into custom recovery.
3. Now flash the zip file and reboot the phone..
(The device will take around 5 minutes to boot up since the dalvik cache is formatted during flashing)
4. Download and Install the app XposedInstaller_3.0_xxxxxX.apk from: Xposed for Lollipop
That's it!! Xposed Framework is Installed in your phone.
You can now start using your favorite Xposed modules (apps).
Credits:
@rovo89 for the wonderful Xposed Framework
@vishal_android freak for TWRP
@DooMLoRD for CWM
Hit the Thanks button if it worked
Click to expand...
Click to collapse

mdsaifalamansari said:
not working
Click to expand...
Click to collapse
What's not working??
This is for Yuphoria phone only.

yeah... i am using yuphoria only..when i updated to official cm12.1 OS and try to flash xposed zip via TWRP i got the error

mdsaifalamansari said:
yeah... i am using yuphoria only..when i updated to official cm12.1 OS and try to flash xposed zip via TWRP i got the error
Click to expand...
Click to collapse
What error?

error
GokulNC said:
What error?
Click to expand...
Click to collapse
cp :write error: n space left on the device
E: error executing updater binary in zip '/sdcard/xposed-v75-sdk22-arm64.zip'
---------- Post added at 06:53 AM ---------- Previous post was at 06:48 AM ----------
GokulNC said:
What error?
Click to expand...
Click to collapse
i have mailed you the error image on [email protected] hope you will find the solution soon....

mdsaifalamansari said:
cp :write error: n space left on the device
E: error executing updater binary in zip '/sdcard/xposed-v75-sdk22-arm64.zip
Click to expand...
Click to collapse
Is your phone rooted?
If yes, install Link2SD app..
Then uninstall any useless system app like 'Tags' or 'CM Bug Report' or 'Google Play Movies' using Link2SD so that you'll get some free space in system partition.
Then flash xposed now.

Hey bro. I deleted google play movies and google play books. After that i flashed the xposed.. It just perform very well on cm12.1 stock rom. Greenify is upto the extent.... But camera shows can't connect to camera app. Even i use third party camera app. It still shows the same thing. After that i flash cm12.1 camera and gallery app once again but not worked on yuphoria...
I'm long waiting for xposed for stock rom on yuphoria....

My yuphora get soft brick when i flashed framework
Sent from my YU5010 using XDA Free mobile app
---------- Post added at 04:40 AM ---------- Previous post was at 04:37 AM ----------
So then i flashed cm12.1 firmare
Sent from my YU5010 using XDA Free mobile app

mayankbanga18 said:
Hey bro. I deleted google play movies and google play books. After that i flashed the xposed.. It just perform very well on cm12.1 stock rom. Greenify is upto the extent.... But camera shows can't connect to camera app. Even i use third party camera app. It still shows the same thing. After that i flash cm12.1 camera and gallery app once again but not worked on yuphoria...
I'm long waiting for xposed for stock rom on yuphoria....
Click to expand...
Click to collapse
I'm using stock COS12.1 and facing no issues.
Maybe an Xposed module that you installed is messing with the camera.
adityamishraa said:
My yuphora get soft brick when i flashed framework
Click to expand...
Click to collapse
Hey, that is NOT soft brick, if you think your phone is stuck in boot loop by flashing Xposed.
Wait for 10-15 mins so that you'll see something like 'Optimizing Apps'.
(This is because the xposed zip clears the dalvik cache)

Gokul bro....
Could u pls tell me which xposed framework you're using.
I was using xposed-76-sdk22-arm64.zip
Which leads to camera can't comnect

mayankbanga18 said:
Gokul bro....
Could u pls tell me which xposed framework you're using.
I was using xposed-76-sdk22-arm64.zip
Which leads to camera can't comnect
Click to expand...
Click to collapse
I'm now using xposed-v79-sdk22-arm64.zip on my COS12.1

GokulNC said:
I'm now using xposed-v79-sdk22-arm64.zip on my COS12.1
Click to expand...
Click to collapse
When trying, showing : error executing updater binary in zip '/sdcard/xposed-v75-sdk22-arm64.zip'

chan10 said:
When trying, showing : error executing updater binary in zip '/sdcard/xposed-v75-sdk22-arm64.zip'
Click to expand...
Click to collapse
bro i think u on cos 12.1 just download system app remover from play store and delete some system apps
and then u will be able to install

Can temp recovery can be used for xposed
Can use a temporary recovery of twrp for the usage of xposed. Is there any need of a permanent recovery for its functioning . Help me out . I know how to boot in temporary recovery using fastboot..

mukulmagotra98 said:
Can use a temporary recovery of twrp for the usage of xposed. Is there any need of a permanent recovery for its functioning . Help me out . I know how to boot in temporary recovery using fastboot..
Click to expand...
Click to collapse
Just flash TWRP using the app "Flashify" from Play Store

Recovery
Flashing by flashify will leads to permanent replacement of cyanogen recovery with TWRP due to which i will not be able to get updates . I have to reflash my cyanogen recovery once again to get updates

Thanks

Sir using of flashify completely removes ur stock recovery with the custom one .......
I am saying can we use a tempory recovery ( hotboot like ) to install xposed .... Is there is any need of a fixed custom recovery for its functioning....
Can this be done : Like use temporary twrp that vanishes on reboot to flash closed and use stock cyanogen recovery for its later functioning

Root Recorey xposed For Qmobile S1 wiko Rainbow lite BLU c5+5 and Stock rom

Root
just install go to get root access
HTML:
http://www.mediafire.com/download/6qgi5belm0y1ri4/kingroot-lollipop.apkRecoveries
Twrp
HTML:
http://www.mediafire.com/download/wb1uy05365soch9/twrprecovery.img
PHilz
HTML:
http://www.mediafire.com/download/8b9wfn62bnx1wy9/philzrecovery.img
Install recover (1)
open recover goto to fastboot connect to pc and open adb and type
Code:
fastboot devices
and then install any wanted recovery you want i.e twrp
Code:
fastboot flash recovery twrprecovery.img
for philz
Code:
fastboot flash recovery philzrecovery.img
other way (2)
just downlaod img files install Mobile uncle
HTML:
http://www.mediafire.com/download/b8gl7dmlq6dj58j/mobile+uncle-toolbox.apk*
open App give root acces and just select desired recovery image and install throgh it
Xposed
downlaod and install appApp
HTML:
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
then go to recovery and install framework for xposed
Framework
HTML:
http://www.mediafire.com/download/ou054m3h6y0b2u2/xposed-v69-sdk21-arm.zip
Xposed Uninstaller
To Uninstall xposed just simply downlaod given zip and install through recovery
HTML:
http://www.mediafire.com/download/mn8c05dezfxgvh8/xposed-uninstaller-arm.zip
P.s if anything goes wrong
Stock rom
http://world.wikomobile.com/scripts/telecharger.php?id=87&type=MAJ

Does Backup and restore works?
backup: OK!!
restore: OK!!but stuck at bootlogo and boots again to recovery..

recovery working fine but..
twrp recovery is working fine but when installing xposed framework phone is getting stuck on noir logo and even uninstalling framework does not fix it please reply

how to fix bootloop when installing xposed frramework
shahrukh12 said:
twrp recovery is working fine but when installing xposed framework phone is getting stuck on noir logo and even uninstalling framework does not fix it please reply
Click to expand...
Click to collapse
i suddenly found this spft backup from the vietnamese forum that will fix the error when you installing xposed :fingers-crossed:
http://www.mediafire.com/?s7m61g20gy38did
how to install:
download sp flashtool and wiko rainbow lite driver from google
load scatter file from the folder
*)UNtick NVRAM (this is important. if you tick it, you will lost your IMEI!!)
turn off your phone
plug the cable
click on download in sp flash tool
wait for it...
.
now it should be worked :laugh::laugh:

This twrp recovery work for blu studio c 5+5? Do you know how to install a custom recovery? I want to install a custom ROM un muy BLU C 5+5. Help please

Installation of TWRP Recovery And Root wirhot any Error
Raen! said:
This twrp recovery work for blu studio c 5+5? Do you know how to install a custom recovery? I want to install a custom ROM un muy BLU C 5+5. Help please
Click to expand...
Click to collapse
Please watch this Detailed Video For QMobile S1 https://youtu.be/m4dU8eSAa34
---------- Post added at 04:55 AM ---------- Previous post was at 04:51 AM ----------
alyxumair said:
Root
just install go to get root access
HTML:
http://www.mediafire.com/download/6qgi5belm0y1ri4/kingroot-lollipop.apkRecoveries
Twrp
HTML:
http://www.mediafire.com/download/wb1uy05365soch9/twrprecovery.img
PHilz
HTML:
http://www.mediafire.com/download/8b9wfn62bnx1wy9/philzrecovery.img
Install recover (1)
open recover goto to fastboot connect to pc and open adb and type
Code:
fastboot devices
and then install any wanted recovery you want i.e twrp
Code:
fastboot flash recovery twrprecovery.img
for philz
Code:
fastboot flash recovery philzrecovery.img
other way (2)
just downlaod img files install Mobile uncle
HTML:
http://www.mediafire.com/download/b8gl7dmlq6dj58j/mobile+uncle-toolbox.apk*
open App give root acces and just select desired recovery image and install throgh it
Xposed
downlaod and install appApp
HTML:
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
then go to recovery and install framework for xposed
Framework
HTML:
http://www.mediafire.com/download/ou054m3h6y0b2u2/xposed-v69-sdk21-arm.zip
Xposed Uninstaller
To Uninstall xposed just simply downlaod given zip and install through recovery
HTML:
http://www.mediafire.com/download/mn8c05dezfxgvh8/xposed-uninstaller-arm.zip
P.s if anything goes wrong
Stock rom
http://world.wikomobile.com/scripts/telecharger.php?id=87&type=MAJ
Click to expand...
Click to collapse
Please watch this Detailed Video For QMobile S1 https://youtu.be/m4dU8eSAa34
---------- Post added at 04:55 AM ---------- Previous post was at 04:55 AM ----------
Please watch this Detailed Video For QMobile S1 https://youtu.be/m4dU8eSAa34

LG G3 beat - recovery error

I tried to install custom recovery in my LG G3 beat (D722k) running on Lollipop. I used Flashify app and downloaded the cyanogenmod image file from get.cm website which is a 10 MB file .
I opened flashify and selected recovery image option and selected the zip file to be flashed. Once flashing was done, I selected reboot and got an Secure boot error and then a blue screen appeared with error,
DEMIGOD crash handlerBI Apps watchdog reset
Ram dump mode
Option:SD Card ram dump mode
Push below files to sdcard before test,
rdcookie.txt, rtcookie.txt
I don't know whether I have done some mistake. Kindly help me installing custom recovery and custom ROM

hello there, could you fix it?? i have the same exact problem