Database Info

[Q] Update from 3.1 & Tiamat 1.4.4 failed

Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you

rogerodd said:
Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you
Click to expand...
Click to collapse
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!

okantomi said:
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!
Click to expand...
Click to collapse
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.

rogerodd said:
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.
Click to expand...
Click to collapse
The problem is that you can't flash anything from the external sdcard with v4.0.0.4. In rom manager, see if you can find"all clockwork recoveries" and find 3.2.0.0. If not, find 3.0.2.8 or 3.0.2.5 and flash one of them, preferably the latest of those I have listed. I think those will at least recognize your sdcard. If you can't do that, you will need to reflash the correct recovery the same way you did when you rooted. Remember, never flash a zip file through adb.
Good luck!

I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you

possible bad download... download again... also, don't think this would be an update... leave it as originally named, just choose the option to choose which zip file to install from the sd card

rogerodd said:
I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you
Click to expand...
Click to collapse
It sounds like you are flashing recovery ok, but you keep overwriting it with the stock recovery.
Here is some important information that should help a lot with making your new recovery "stick"and this was taken from the Idiot's guide to flashing...in the Development section, and originally written by publicanimal:
4. Install recovery image (CWM)
Download the recovery image file and save it to your computer
Boot into flash mode with 'adb reboot bootloader'
Install your downloaded recovery image
C:\Documents and Settings\Anders> fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo this section
Enter CWM with the following procedure
Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work, experiment with the timing ...
When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for reaching this far .
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. If that happens, or if you see "starting fastboot protocol " your timing wasn't right and you need to reflash the recovery image and try it again.
See original post,below for more information.
http://forum.xda-developers.com/showthread.php?t=1130996

[Q] How to sign files so that they work in Android System Recovery 3e

Hello Guys
I am new to android so please correct my mistakes and i will try to give every detail as possible.
I am having Genx tablet GX pad 300 (It is rooted). By mistake i left my tablet as home and my small brother tried to unlock it. As it was password protected so after 15 failed failed attempts, it got hard locked and Asked for my Gmail ID and PASSWORD to unlock. BUT my wifi was disabled so i was not able to reset it.
An other method was to use ADB and bypass the Password, but The usb debugging was disabled so it didnt worked either
thirdly I saw a method (on XDA) to use Recovery mode to flash AROMA Filemanager and delete the files that were related to the password.
​Now the real problem begins so please cross your fingers.
First i copied the 'aroma file manager" .zip file in external sd card. the file is in the attachment and here is the link to its XDA page, click here
First i booted my device into the Recovery mode and seleted the the option "Apply update from external sd" and selected the update file (.zip format). It gave me error
E Signature verfication failed
Installation aborted
I had Android System Recovery 3e
I did a five hour research and came to know that it is security in android system recovery 3e to reject unofficial installation, i came to know that if i have to fix these errors the either i have to flash a Custom rom like CWM or a MODDED Android system recovery 3e which allows the installation of unofficial apps. the problem is that there is now Custom CWM for my device and i dont know how to make one from the source code. Secondly they have to be installed by ADB but i cant acess my device locked. I also found that sometimes we try to flash a new recovery form within a recovery it may brick the device. i also found that the updates that can be flashed by android system recovery should be named Update.zip and should be officially signed.
I know that there are many methods and apps to sign the .zip files so that they are accepted by the Android system recovery 3e.
i came across apps like zipsigner and signapktic both of them are available on google play. I also used used manual method to sign the aroma filemanager .zip file but every thing i tried it gave me the E signature verification error installation aborted.
My Question is this that how to Sign files so that they are accepted in the ANDROID STOCK RECOVERY 3e
Please keep it simple as possible.:good::laugh:

Download APKManager (5.1). Extract it, copy your zip to ./other/ folder, run cmd.exe, change directory to ./other/ then sign using following command in cmd.exe:
java -jar signapk.jar -w testkey.x509.pem testkey.pk8 your-rom.zip signed.zip.

~It does not require internet connect connection..you can sign in to google account without internet~

Me too!
I have the same problem and can not find an answer for my life! I really need something that can sign the zip for the stock recovery!

do not recognize the command

insufficient memory error Nvidia Shield Tablet LTE

hello... i tried to flash my LTE US model to update 1.2.1 due to problem with cellular on lolipop..
the process have been gone smooth until fastboot flash system system.img
it says there failed.
and i cant boot my tablet, nor i could proceed with flashing update 1.2.1
could anybody help?
Credits to BlackDave from the thread http://forum.xda-developers.com/shield-tablet/help/problems-downgrading-to-kitkat-t2995892#
Fix:
1. download the full OTA from this thread
http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
2. also download CWM recovery.
3. after thats done, copy files from step 1 into external SD card( considering u can't get into the devices internal memory). DO NOT EXTRACT
4.boot the device into fastboot mode.
5. install CWM recovery from Step 2.
6. use CWM recovery to install files from step 1.
7. disable stock recovery IF U want(optional)
8. Restart and pray that your device WORKS.

[Completed] Can't install CM12 to Galazy S2 I9100P

I've downloaded the latest stable files and followed the instructions here to the letter:
http://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-cyanogenmod-12-t2955551
But I cannot get CM12 to install. If I boot the phone using stock recovery I can see and select the CM12 zip file but I get the 'Signature verification failed' error. If I use CWM recovery where I can toggle signature verification on and off, it's like it can't even see my SD card. Even though it says that the current directory = /sdcard it isn't, and instead just shows everything on the device internal memory.
Can anybody help? I've been stuck with this for about 8 hours.

I've also tried installing TWRP recovery. This does at least see my SD card and let me choose the CM12 zip file, but when I press the 'FLASH NOW' button, it asks me if I'm sure I want to reboot to recovery and complete the specified actions then does absolutely nothing when I select 'OK'.

Having spent hours trying various different things, I've made some progress and can now at least get CWM to see my SD card and the CM12 zip file. Unfortunately the installation fails with an error 7. I've deleted all of the 'getprop' entries from the 'updater-script' but it's made no difference. Please can someone help?

Thanks to the overwhelming support and advice received on here I managed to get it working
I'm posting this in case anybody else happens to have the same problem and finds this thread. This is what worked for me:
1. Download and install Odin
2. Flash stock ROM
3. Flash rooted kernel (I used one with CWM pre-installed)
4. Update CWM to v 6
5. Perform factory reset
6. Wipe cache
7. Wipe Dalvik cache
8. Install CM12
9. Install Google apps

Hello,
Glad you found your way,
Thread closed!
-Vatsal

Need custom recovery for Mobiistar C1 shine 4g mt 6739 device

Need custom recovery for Mobiistar C1 shine 4g mt 6739 device as m stuck need it urgently and want install android 10 gsi image my device has arm32 a only architecture some suggest me some good and lite gsi images please firstly I need custom recovery twrp please someone help.

It would be hard to support a 2018 device I guess.

[CLOSED] I Will build TWRP for your device!
I wanna build twrp for your device! Pls give info about your device! if possible give stock firmware!
forum.xda-developers.com

i can upload recovery.img file for if you want

its Mobiistar C1 shine (MT6739) arm 32bit a only supported device running on 8.1 i was some how able to root it but unable to install custom recovery if u can please build one for this device i will upload stock recovery.img in few minutes presently its bricked but i will recovery it because i have stock firmware and flashing tool of it....so dont worry just please build a custom recovery like twrp for this device asap if possible

Again: You request a TWRP build for your device going to this thread
[CLOSED] I Will build TWRP for your device!
I wanna build twrp for your device! Pls give info about your device! if possible give stock firmware!
forum.xda-developers.com

any custom recovery bro sorry for that (twrp)

my phone back running again i have flashed it with stock firmware recovery images i have attached earlier and so does phone details screenshot now present situation is 8.1 not rooted stock recovery and firmware so i hope if anyone can help i will be glad

installed latest magisk apk and .zip also by patching boot.img file and flashing that with sp tool to install magisk and got root privilege's

all now i want is proper running and fully functional custom recovery to install custom roms and mods

copvaibhav said:
its Mobiistar C1 shine (MT6739) arm 32bit a only supported device running on 8.1 i was some how able to root it but unable to install custom recovery if u can please build one for this device i will upload stock recovery.img in few minutes presently its bricked but i will recovery it because i have stock firmware and flashing tool of it....so dont worry just please build a custom recovery like twrp for this device asap if possible
Click to expand...
Click to collapse
I am not responsible for any wrongdoing by you. Always have ROM stock files. Any error, install stock recovery again.
First you need to unlock the bootloader if necessary! Unzip file attached and look 2 files.
Then, the installation plan:
0) Flash the TWRP with SPFT or fastboot;
1) Enter TWRP IMMEDIATELY without starting in the system, otherwise TWRP can revert to the stock;
2) When asked to enter the password, select Cancel;
3) Load the file with Magisk (look for any magisk19.zip for TWRP and the decryption file for EXTERNAL memory;
4) Flash Magisk immediately and then install the file data_decrypt_Mobiistar_C1_Shine.zip immediately;
5) Make FORMAT DATA - bottom left button - Type: YES. Go back to the TWRP menu;
6) Make Wipe: data, cache, dalvik (reset to factory settings! Save your data!);
7) Reboot to TWRP (password must not ask);
8) Restart on the system, root is received.

thanks bro for making recovery.img when installing magisk 19.zip its giving error on last step failed to mount /vendor/persist (invalid argument). done
after that i tried to install your data decrypt .zip after one reboot to recovery because i have tried before without reboot recovery once so this time rebooted and installed your data.zip file and again on the last step same error as magisk failed to mount /vendor/persist (invalid argument). done
after that i tried to format by typing yes but again same error failed to mount /vendor/persist (invalid argument).done
just to inform you i have formatted phone from inside by turning it on factory reset but nothing happened....and internal space is not mounting i some how managed to install these things via OTG USB but same error again and again. i am attaching screenshot also which i captured from other phone of mine.
kindly help asap

copvaibhav said:
thanks bro for making recovery.img when installing magisk 19.zip its giving error on last step failed to mount /vendor/persist (invalid argument). done
after that i tried to install your data decrypt .zip after one reboot to recovery because i have tried before without reboot recovery once so this time rebooted and installed your data.zip file and again on the last step same error as magisk failed to mount /vendor/persist (invalid argument). done
after that i tried to format by typing yes but again same error failed to mount /vendor/persist (invalid argument).done
just to inform you i have formatted phone from inside by turning it on factory reset but nothing happened....and internal space is not mounting i some how managed to install these things via OTG USB but same error again and again. i am attaching screenshot also which i captured from other phone of mine.
kindly help asap
Click to expand...
Click to collapse
This is Ok. I made TWRP fast and not remember if the stock partitions has \vendor\persist. So if has that's message is normal. Therefore messages about \vendor\nvdata;nvram;nvcfg is normal too. Very pacth zip files can delete that and the device cannot have IMEI.
First: Is good know the file TWRP worked;
- - You can't install any zip without FORMAT DATA first because FORMAT DATA process can view internal storage. If you don't FORMAT DATA maybe the zip file going wrong with MicroSD & OTG.
In this moment you understand: not use external storage! Put zip in the internal storage an try again.
About MTP: Has anything wrong wiht A8.1 & TWRP. Most devices with A8.1 and TWRP do not have access to MTP. I don't know what happens because I don't know why TeamWin was unable to resolve this.
Now you need put zip with adb command (search how to do) or use sileload on the TWRP.
PS: the picture attached by you show about decrypt. In the first moment you need acept modifications and password you press CANCEL.

lopestom said:
This is Ok. I made TWRP fast and not remember if the stock partitions has \vendor\persist. So if has that's message is normal. Therefore messages about \vendor\nvdata;nvram;nvcfg is normal too. Very pacth zip files can delete that and the device cannot have IMEI.
First: Is good know the file TWRP worked;
- - You can't install any zip without FORMAT DATA first because FORMAT DATA process can view internal storage. If you don't FORMAT DATA maybe the zip file going wrong with MicroSD & OTG.
In this moment you understand: not use external storage! Put zip in the internal storage an try again.
About MTP: Has anything wrong wiht A8.1 & TWRP. Most devices with A8.1 and TWRP do not have access to MTP. I don't know what happens because I don't know why TeamWin was unable to resolve this.
Now you need put zip with adb command (search how to do) or use sileload on the TWRP.
PS: the picture attached by you show about decrypt. In the first moment you need acept modifications and password you press CANCEL.
Click to expand...
Click to collapse
sideload is not starting forgot to mention it i have tried that also booted phone normal put the file in internal but in recovery cant have access to internal storage and yes i have press cancel first and that accepted modification but nothing happened no internal storage access only some how otg thats it i dont know what to do

copvaibhav said:
sideload is not starting forgot to mention it i have tried that also booted phone normal put the file in internal but in recovery cant have access to internal storage and yes i have press cancel first and that accepted modification but nothing happened no internal storage access only some how otg thats it i dont know what to do
Click to expand...
Click to collapse
Okay. Wait my free time and I'll create other TWRP for your device.
Reflash stock recovery if you want & test other file soon.
Update
\|/ Lucky file attached today. So install and test. You can install zip that I put before or Donwload acoording your device cpu has. Read instructions about that again.
Reference Download: https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/

thanks bro i dont know how it worked but it worked again i have to use otg but this time it worked by downloading different force disabler.zip after that i have formatted the data by typing yes it worked then again i flashed your disabler and new recovery image and phone booted magisk installed phone rooted.....thanks a ton i dont know how to say thanks you but thank you all .
can please suggest me as my mt 6739 is 32arm a only device some light gsi for my device actually i want custom mods in gsi so if u can suggest me which also supports my device i will be very thankful

copvaibhav said:
thanks bro i dont know how it worked but it worked again i have to use otg but this time it worked by downloading different force disabler.zip after that i have formatted the data by typing yes it worked then again i flashed your disabler and new recovery image and phone booted magisk installed phone rooted.....thanks a ton i dont know how to say thanks you but thank you all .
can please suggest me as my mt 6739 is 32arm a only device some light gsi for my device actually i want custom mods in gsi so if u can suggest me which also supports my device i will be very thankful
Click to expand...
Click to collapse
Look correct app to know about your device: Treble Info
You need try install AOSP 8 & 9: https://github.com/phhusson/treble_experimentations/releases
Look "bugs"; try solving; keep your time with experiments.....
After you can try LOS, RRMix, Havoc, etc.....
About this thread/ask help about Custom Recovery so Solved. @jerryhou85
Good Lucky!

system-arm-aonly-vanilla-nosu.img.xz
system-arm32_binder64-aonly-vanilla-nosu.img.xz
bro which file shpuld i download as i told you mine is 32bit arm a only (what is arm first link and arm32binder64 aonly difference) kindly tell.
just to clarify i have download both removed.xy from ext. and flashed from recovery system image but phone goes into fastboot after reboot and when rebooting in recovery at the top it shows no os installed.

lopestom said:
Okay. Wait my free time and I'll create other TWRP for your device.
Reflash stock recovery if you want & test other file soon.
Update
\|/ Lucky file attached today. So install and test. You can install zip that I put before or Donwload acoording your device cpu has. Read instructions about that again.
Reference Download: https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/
Click to expand...
Click to collapse
Sir it's stuck on password screen touch not working please fix it, I will always be grateful to you.

Honey2012 said:
Sir it's stuck on password screen
Click to expand...
Click to collapse
The first start need choose the CANCEL. I think you not know about TWRP (unofficial) and the process with device/TWRP without encryption/decryption process.
If you want that so send me some device to develop/have the possibility of getting that option.
Honey2012 said:
touch not working please fix it, I will always be grateful to you.
Click to expand...
Click to collapse
As you read, I not have your device in my hands!
Many 32bits and few 64bits devices have problem with touch screen from kernel. That's not my error! It's from device company.
I not know about touch screen work or not since copvaibhav not write about. But I won't fix this. There is also the possibility to use OTG and plug in a USB Mouse to use in TWRP.
There are solutions to fix the touch screen but I don't have the device and I don't have time to do it. Search and you will know. So solve it yourself and thank your self for it.
Ask copvaibhav for more process and using TWRP.