Database Info

[RECOVERY LOCKED/NE1] Safestrap Recovery v4.11 B01 [2019 Sep 12]

VERIZON SAMSUNG GALAXY S3 (D2VZW)
PLEASE READ READ READENTIRE OP
"ALL MAJOR WORK DONE BY HASHCODE SO GO GIVE HIM SOM THANKS.DO NOT POST ANY BUG OR ISSUE COUSED BY THIS RECOVERY IN ORIGINAL THREAD BY HASHCODE, POST HERE AND I WILL HELP YOU."
CURRENT PROJECT STATUS:
BETA v4.11-B01 (NE1/KK)
WHAT IS SAFESTRAP?
Safestrap is a Bootstrap / Recovery for locked bootloader phones. The goal is to avoid touching your primary system (I'll call this "stock" system) and only flash or make large changes to another place on your phone that Safestrap treats as a "2nd system" (in this case, it's a series of virtual ROM slots located on the internal emmc area: "/sdcard"). Once installed, you will see a "Splashscreen" giving you the option to hit "menu" to enter recovery. The recovery portion of Safestrap is now based on TWRP 2.6.1.0 (a touch based recovery) and you can perform .zip installs, backups and restores here. The additional features I've added to TWRP are mostly located under the "Boot Options" menu:
Here you can create virtual ROM-slots (3-4 on the S3 due to partition size and internal space) for flashing ROMs. NOTE: The bigger you make the /data partition the less room you will have to make other ROM-slots.
You can activate a new ROM-slot by choosing the slot you wish to make active and then selecting the "Activate" button. Once active, you will see the "rom-slot#" up in the top of the screen shown in green. If you make the "stock" ROM active, then you can see it in the top shown in red.
Once a ROM-slot is active, all actions you would normally perform using TWRP are directed to that ROM-slot. For example, "Install" to flash a .zip, backup and restore.
HOW DO I INSTALL SAFESTRAP?
Requirement: Root
[Safestrap pre V4.07] Requirement: busybox. Grab "Busybox" from the Play Store and run the installer.
Once installed, open up the Safestrap application, Agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
Then use the "Install Recovery" button. You should see the current version down in the lower left corner of the window. And the "Status:" should say "Installed" when you're done.
From there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter Safestrap Recovery using the [ menu ] button.
INSTALL VIDEO by DMX: https://www.youtube.com/watch?v=_RZI...e_gdata_player
HOW DO I ENTER RECOVERY?
During each reboot a splashscreen will be displayed showing whether the device is running a rom-slot or on the "Stock ROM".
Press the button shown on the screen to either enter "RECOVERY" or "CONTINUE" booting (or the hard button underneath each option).
HOW DO I UPGRADE SAFESTRAP?
Push the APK up to your sdcard.
Boot back into the "stock" rom-slot.
Open your old Safestrap app and use the "Uninstall Recovery" button
Browse to where you pushed the APK
Click on it and install like normal
Once installed, open the APK, Grant SU access, Use the "Install Recovery" button.
KNOWN ISSUES:
- Sometimes the installation doesn't work correctly. If you don't see the splashscreen after a rebooting. Install Safestrap again. (DEBUGGING THIS AS I GET TIME)
- Busybox is now required for the Safestrap APK to work correctly
DOWNLOADS:
CONFIRM THAT YOU ARE USING A VERIZON WIRELESS SAMSUNG GALAXY S3 (d2vzw) [KITKAT:NE1]
NEW
LATEST FILE: Safestrap-D2VZW-4.11-B01.apk
androidfilehost
OLD
LATEST FILE: Unofficial-Safestrap-D2VZW-3.75-B05.apk
androidfilehost
WARNING: Safestrap is heavily modified to be "Safe" for your device. Do not download TWRP from their website and expect it to work the same way. Also TWRP does not support Safestrap, tho some issues that may come up will be TWRP dependant, please try and contact myself or look on the forums for your device for answers before hunting down TWRP people. They won't be able to help w/ Safestrap specific questions.
Special Thanks To
@Hashcode , DeesTroy & TeamWin for all their hard work making TWRP such a fantastic recovery. If you are considering a donation, then please have a look at the Team WIN website: http://teamw.in/project/twrp2

CHANGELOG:
4.11-B01 [2019-09-12]
- TWRP updated to 3.3.1.
- Fix reboot function.
- Add reboot to safestrap button in reboot menu.
- Move Boot Options to advanced menu items.
- Fix CHARGER_BOOT detection.
- Fix datamedia mount.
- Add hijack-backup during image flashing.
- Update safestrap portrait theme.
- Update safestrap app to use topjohnwu's libsu & internal busybox (busybox app not needed anymore).
- Safestrap app: Update install recovery function.
See my github for more.
4.01-B03 [2016-03-29]
- USB OTG support.
4.01-B02 [2016-02-13]
- Fix brightness on Recovery.
4.01-B01 [2016-02-06]
- Update TWRP to version 3.0.0-0 full changes here
OLD
4.00-B02 [2015-11-22]
- Synced with latest TWRP commits.
- Remove read-only system.
- Remove screen timeout.
4.00-B01 [2015-08-13]
- Update TWRP recovery to 2.8.7.0 .
- Materialize Safestrap apk.
- Drop aosp support.
3.75-B05 [2015-02-02]
- Update TWRP recovery to 2.7.1.0 .
- Temporary fix for aroma installer.
3.75-B04 [2015-02-02]
- Add support to Omni ROM and fix sdcard on slot rom.
3.75-B03 [2015-01-15]
- Add support to AOSP on ROM slot (only) (this will load cm and slimkat ramdisk at boot)
3.75-B02 [2014-07-18]
- Fixed issue in TWRP recovey due to stock NE1 kernel framebuffer! (final fix)
all done by Hashcode
3.75-B01 [2014-06-26]
- Updated hijack for KK bugs
- Fixed ROM-SLOT support
- Fixed internal storage mount issue
Safestrap Recovery theme (Stock TWRP)
How to...
The theme zips are not flashable. First installation has to be done manually:
- Download the theme and rename it to "ui.zip".
- On SD card (if device has internal and external storage, use the internal) open TWRP folder and create a folder called "theme", without capital letters.
- Copy ui.zip to theme folder.
- Restart to recovery.
Safestrap Stock TWRP theme v4.00 B02.zip
Kitkat Custom ROM list work with Safstrap:
SUPERLITEROM! I535VRUDNE1
PaulPizz.VRUDNE1
Kernel modules
d2vzw-NE1-modules.zip
d2vzwpp-NF5-modules.zip

Does it mean I can flash kk based rom on one of the slots? If so, does it has to be TW based like the last version?

ruokuo said:
Does it mean I can flash kk based rom on one of the slots? If so, does it has to be TW based like the last version?
Click to expand...
Click to collapse
Yes kitkat tw only, and you can backup stock system and data and restore in slot rom.
I had my own custom tw rom but cant uploud 1 giga file
Wifi should ok without modules.

So where i can find ROMs for this safestrap, pls help im noob)

leroyinc said:
So where i can find ROMs for this safestrap, pls help im noob)
Click to expand...
Click to collapse
No ROMs yet, you can ask dev of custom rom to build kitkat ROMs.
Iam building one, noy yet ready but will take so much time to uploud.

mohammad.afaneh said:
No ROMs yet, you can ask dev of custom rom to build kitkat ROMs.
Iam building one, noy yet ready but will take so much time to uploud.
Click to expand...
Click to collapse
Pls call when some ROMs appear, thx.

leroyinc said:
Pls call when some ROMs appear, thx.
Click to expand...
Click to collapse
I will add links if some one update his custom rom.
you can backup stock rom and restore in slot rom and modify and debloat it as you want.

mohammad.afaneh said:
I will add links if some one update his custom rom.
you can backup stock rom and restore in slot rom and modify and debloat it as you want.
Click to expand...
Click to collapse
On my stock rom didnt work sms, could i do smth with this, can i load new radio or can u suggest me what to do?

leroyinc said:
On my stock rom didnt work sms, could i do smth with this, can i load new radio or can u suggest me what to do?
Click to expand...
Click to collapse
I dont have idea but flash full stock kitkat and wipe data may solve the problem.

mohammad.afaneh said:
I dont have idea but flash full stock kitkat and wipe data may solve the problem.
Click to expand...
Click to collapse
Okay, thx)

mohammad.afaneh said:
I dont have idea but flash full stock kitkat and wipe data may solve the problem.
Click to expand...
Click to collapse
Btw, will u give me instruction how to install ROM when it appear ?
And this ROM may have a basis like CM11 or it can be just KK ?
Thx.

leroyinc said:
Btw, will u give me instruction how to install ROM when it appear ?
And this ROM may have a basis like CM11 or it can be just KK ?
Thx.
Click to expand...
Click to collapse
Kitkat TW based rom only.
just creat a rom slot from boot menu in recovery, activate it, then flash the rom, reboot!

mohammad.afaneh said:
Kitkat based rom only.
just creat a rom slot from boot menu in recovery, activate it, then flash the rom, reboot!
Click to expand...
Click to collapse
will try.
---------- Post added at 12:15 AM ---------- Previous post was at 12:11 AM ----------
mohammad.afaneh said:
Kitkat based rom only.
just creat a rom slot from boot menu in recovery, activate it, then flash the rom, reboot!
Click to expand...
Click to collapse
and can i add old radio which i need to work i-net and sms in that ROM ?
P.s sorry for my noob questions.

so has anybody been able to create a rom with dsixda's Android Kitchen and successfully been able to run the rom with this version of safstrap? I have deodexed a stock rom VRUDNE1 and tried flashing it and i get a successful flash but on boot up once it gets to the red verizon screen it just stays there. ive let it sit for over 30 mins and no luck. ive tried everything i can think of including rebuilding the rom....???? and i doing something wrong here?? Has anyone else had any luck?

mohammad.afaneh said:
Kitkat based rom only.
just creat a rom slot from boot menu in recovery, activate it, then flash the rom, reboot!
Click to expand...
Click to collapse
Kit Kat touchwiz ROMs only. There are Kit Kat AOSP ROMs in the original development section. Noobs need to know they can't flash those through safestrap, only touchwiz ROMs
Sent from the Shark Tank using XDA Premium 4 mobile app

landshark68 said:
Kit Kat touchwiz ROMs only. There are Kit Kat AOSP ROMs in the original development section. Noobs need to know they can't flash those through safestrap, only touchwiz ROMs
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what means ``flash`` ?

larrycjr said:
so has anybody been able to create a rom with dsixda's Android Kitchen and successfully been able to run the rom with this version of safstrap? I have deodexed a stock rom VRUDNE1 and tried flashing it and i get a successful flash but on boot up once it gets to the red verizon screen it just stays there. ive let it sit for over 30 mins and no luck. ive tried everything i can think of including rebuilding the rom....???? and i doing something wrong here?? Has anyone else had any luck?
Click to expand...
Click to collapse
Use archikitchen I had built one and it booted.
Clone archikitchen repo for last changes.
You need ubuntu or virtual on windows.
deodexe first test to know if its boot.
Then add root, bbx, and debloat with archi only. You can remove apk manualy.
Dont include the boot.img! Not neccessary
build with bbe command.

landshark68 said:
Kit Kat touchwiz ROMs only. There are Kit Kat AOSP ROMs in the original development section. Noobs need to know they can't flash those through safestrap, only touchwiz ROMs
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry for mismatch I forgot the two letters.

leroyinc said:
what means ``flash`` ?
Click to expand...
Click to collapse
To flash means to put a ROM or kernel or modem or mod onto your phone.
Sent from the Shark Tank using XDA Premium 4 mobile app

[ROMS][Root][Mods] QMobile i9

Do All The Following At Your Own Risk. I Will Not Be Responsible In Any Case.
Click to expand...
Click to collapse
Rooting​
1.Rooting i9 stock rom is very simple, download the framaroot app attached below
2.Install framaroot
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox if you want
6.You are now rooted
For KitKat Update Click Here
Credits
umangleekha​

Custom Recovery
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
http://www.mediafire.com/download/b99962l7273y4du/MPRioRecoveryInstaller.apk
Credits
ng0tkul4​

Battery Mod
You must have noticed that about 4% battery is drained till morning when phone is in standby, a simple buildprop tweak can solve this and now my phone drains only 0% OR 1% battery in standby overnight, just follow the steps below-
1.You must be rooted before doing this
2.Download root browser from playstore
3.Open Root Browser.
4.Scroll down and open system folder
5.Open build.prop, you will see a menu asking how to open the file, select Text Editor
6.Now be very careful, don't make any mistake here
7.Scroll to the bottom and type "pm.sleep_mode=1"
8.Now press back button twice then press yes to save the changes and restart
9.Now enjoy no battery drain
Credits
umangleekha​

Stock ROM
1) Download the ROM from the link https://mega.co.nz/#!YwBRkCxB!hTSU0eqI-zMwufgqug2qaHpVrTutXnPCn4rPVJfAtEM.
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
Credits
malick186​

Miui ROM with OTA updates
Features:
Official MIUI V5
Nokia Keyboard
Official OTA updates
Extreme Scrolling
Init.d Support
Zipaligned
1) Download the ROM from the link http://d-h.st/Pc2
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
OTA Updates
Click Here For Updates
Credits
INCPAK Team
helloansuman​

Custom ROMs
Reserved For More ROMs

KitKat Rom For i9
For Updating QMobile i9 to KitKat Follow This Link
KitKat QMobile i9 Link

Need some help bro! Whenever flash the miui rom my internal sd card dnt get mounted! Any workaround which you know??? reply asap!
Sent from my MIUI using XDA Free mobile app

Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow

qwerfaseeh said:
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
Click to expand...
Click to collapse
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app

malick186 said:
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
Click to expand...
Click to collapse
Use this miui rom and update it with OTA it has no bugs
http://d-h.st/Pc2

QMobile i9 is now supported by MIUI India so visit to get latest updates
http://forum.miui.co.in/viewtopic.php?t=1492

For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui

qwerfaseeh said:
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
Click to expand...
Click to collapse
i installed this lewa os v1 rom on i9 sim card not detect after restore imei can you please help
https://www.facebook.com/notes/myph...gua-rio-versions-v0-v1-and-v2/288315014697928

To restore imei you need to have busybox installed check that it has busybox installed or not and use latest version of MTK droid tools

Original QMobile i9 Rom
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!

Its already on post

AliZaib1 said:
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Click to expand...
Click to collapse
Next time search before you post anything. :banghead:
Sent from my SGH-T999 using XDA Free mobile app

It is on my 2nd post, the link of which is posted on first page named kitkat for noir i9

I tried this method to install customer recovery in i9. But now my mobile isn't going into recovery. When I press both volume and power buttons it shows option to go into recovery and factory mode but then mobile just turns on if I press volume button or not. Can any one guide how to get my recovery fixed for Q mobile i9?. Thanks in advance.
qwerfaseeh said:
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
Click to expand...
Click to collapse

[StockFirmware] Vodafone Smart Tab 4 3G 4.2.2->7.0.1 TWRP and NOUGAT UPDATED!

THIS PROJECT IS NO LONGER SUPPORTED.
UPDATED 27/04/2017 Content written in RED...... NEW UPDATE 24/3/2018 CONTENT WRITTEN IN BLUE
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
24/3/2018: Miui8 Added. Flash and Go as usual. No NVRAM fix needed (at least i didn't need to flash it,you might have to if you get the nvram error in wifi).
-BUG: You have to manually set IP, dont let it do it automatically DHCP is broken in this build
***Please tell me any extra info as i haven't fully tested it out yet***
24/3/2018: Lineage OS (6.0.1): same as always with 6.0.1 aosp builds, Flash, Dont reboot and install nvram fix. then reboot and your good to go. Might need Gapps in this build.
24/3/2018: !!!THE BIG UPDATE TO NOUGAT!!!!
-Resurrection Remix Nougat:
Install as usual, no Nvram fix is needed this time around.
Download and install gapps 7.0.1 pico or what ever version you like.
If you have a SD-card inserted a warning will pop up, if you have files on there remove them before flashing the rom. After you have saved your files format it as internal and you will be good to go.
*ALSO KERNEL SOURCES ARE NOW AVAILABLE*
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***

Reserved

Links are now live and ready! Removed country lock from firmware so it can be installed on any Vodafone Smart Tab 4 in any country and on any *Service.
*Haven't been able to find a tester.

Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?

lintronics said:
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
Click to expand...
Click to collapse
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%

Brilliant. Took a bit of trial and error since I've not worked with this tool before but got my tablet updated to 4.4.2 at last. Thanks so much for putting this together, I really thought I'd be stuck on 4.2. Just gotta figure out how to root now, that doesn't seem to be working.

How to find exact model of my Vodafone Smart Tab 4 ?

Can i flash this on my iusacell alcatel pop 8 p320a? I need kitkat

Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help

Artur1993 said:
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Click to expand...
Click to collapse
Just change the file extension to Zip
---------- Post added at 03:00 AM ---------- Previous post was at 02:58 AM ----------
Valkiry said:
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Click to expand...
Click to collapse
Does this allow the Tab to make and receive calls over GSM? Is this unbranded firmware not Vodafone firmware?
You need root access to install custom recovery via adb in fastboot, so you mean get root, install recovery then remove SU before flashing?

Okay so the first dump (4.2.2) is stock firmware from Hungary Vodafone used by mtktools to flash, please not this does not have super user so your device is allowed to update to the 4.4.2 file.
Second file is an update to 4.4.2 for those that missed out on the OTA release because they had root.
Third file is a custom debloated 4.4.2 flashable through CWM.
Never install SU on hungary 4.2.2 firmware as you will never get to upgrade to 4.4.2 firmware.

Updated with new files please check post #1

Gapps on RR v5.7.4 is now fully functional. Enjoy please dont Forget to hit that Thanks button!

New RR 5.7.4 Update:
THIS IS A TWRP RESTORE METHOD!
Replace DATA.* and SYSTEM.* files in one of your own backups of RR5.7.4!
Updated SU to 2.79
Busybox Updated
Gapps Installed
DivineBeats V9 installed
Please note there will be alot of missing apps as i needed to make room in system partition for this. There will be no call functionality, or messaging functionality. Also music player app is gone along with YGPS and Adaway. Let me know how you guys go

Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).

Where is the Scatter File for MT8382?

Cookiestalker said:
Where is the Scatter File for MT8382?
Click to expand...
Click to collapse
There is no scatter file for MT8382. Vodafone changed it to lock people out of backing up. The original scatter file provided is the real device code. Why are you asking for MT8382?

przenczo said:
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Click to expand...
Click to collapse
Extract the files and re-ZIP it as a zip file. I made a mistake. It won't affect install

Valkiry said:
UPDATED 27/04/2017 Content written in RED
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Click to expand...
Click to collapse
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy

bussi2010 said:
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
Click to expand...
Click to collapse
Glad I could help you out dude! There is 7.1 floating around but it's not very good and I don't use this device much anymore. If I do end up doing it ill post it here. Don't forget to hit tthat thanks button

Install Xposed in Coolpad Note 5 [Nougat & MM]

This guide is for only Coolpad note 5 Nougat 7.0 [However you can try on MM too]
You must have root access and twrp before installing xposed framework
Note: Im not responsible if it damage/harm/brick your device. Install at your own risk
First take backup from twrp, so if you got into trouble you can restore your rom easily
----
Step 1) install xposed installer apk from here >> Click Here
Note: only install apk, but dont install framework from app
if it ask root permission then grant/allow it.
Step 2) Now you need to install framework using twrp
Download framework (nougat) zip>> Click Here
Download framework (mm) zip >> Click Here
Download xposed Uninstaller zip >> Click Here
^^i only tried nougat version, because i dont have mm. you can try if you have mm installed
Before flashing from twrp put your xposed uninstaller zip in your sdcard or internel storage, so you can remove xposed if you get bootloop
Step 3) Now flash xposed framework from twrp
- After flashing it will reboot & Wait for 20-30 minute
- Then you will see home screen
Enjoy
--> If your phone doesnt boot up after 30 minutes then you need to uninstall xposed using uninstaller zip
@Credit
- @rovo89
- TonyStark
Official Support thread>> https://forum.xda-developers.com/showthread.php?t=3034811

tcpcd said:
This guide is for only Coolpad note 5 Nougat 7.0 [However you can try on MM too]
You must have root access and twrp before installing xposed framework
Note: Im not responsible if it damage/harm/brick your device. Install at your own risk
First take backup from twrp, so if you got into trouble you can restore your rom easily
----
Step 1) install xposed installer apk from here >> Click Here
Note: only install apk, but dont install framework from app
if it ask root permission then grant/allow it.
Step 2) Now you need to install framework using twrp
Download framework (nougat) zip>> Click Here
Download framework (mm) zip >> Click Here
Download xposed Uninstaller zip >> Click Here
^^i only tried nougat version, because i dont have mm. you can try if you have mm installed
Before flashing from twrp put your xposed uninstaller zip in your sdcard or internel storage, so you can remove xposed if you get bootloop
Step 3) Now flash xposed framework from twrp
- After flashing it will reboot & Wait for 20-30 minute
- Then you will see home screen
Enjoy
--> If your phone doesnt boot up after 30 minutes then you need to uninstall xposed using uninstaller zip
@Credit
- @rovo89
- TonyStark
Official Support thread>> https://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Can you tell me which theme module is working...gravity box is working or not?

[email protected] said:
Can you tell me which theme module is working...gravity box is working or not?
Click to expand...
Click to collapse
none of working

How to use multiscreen option in coolpad note 5 nougat

Make a custom ROM for Coolpad note 5. Please. Based on stock Android Oreo.

Custom Rom For Huawei Y3ii LUA-U22 - Cyanogenmod 12.1 Unofficial

Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.

sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.

Does this work on LUA-U23?

DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.

Most of system apps have disappeared, clock bluetooth and others any reasom why ?

viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?

will this remove huawei apps like huawei backup??

drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.

but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.

drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM

hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance

pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?

Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:

pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy

Why is my phone stuck on start after flashing the Rom .

Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?

The link is down.... Anyone please give new download link

aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.

Link not Working
Link not Working

Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..