Hey guys,
(Ignore spelling and writing mistakes, I am not a native speaker :X )
i have some problems with my new phone. I plugged into my USB to root it but had some problems so I decided to wait a little with rooting and first learn more about it before rooting my phone.
Well, I plugged it out and booted, but instead of booting it loaded up some kind of "Recovery Mode" . I tried to get out of it but landed in the Hardware Testing Section, where I am stucked now.
With some research and help on reddit I found out that I was in the microphone test, I had to plug in my Headphones and could continue but now I am stucked here : ht tp:/ /imgur. co m/vGZorET ( delete spaces )
Unfortunately I couldn't find help in the WWW or your forum. I hope someone can help me
thanks & greetings
Konrad
RESOLVED : Guys, if you have this or a similiar problem with your phone just hold down Power Button for a solid 10 seconds!
Related
Hi.
My dad bought an Ampe 10 and one day it simply didn't start. So I'm trying to fix it.
I'm suppose to be able to get into a recovery menu if i hold volume - and power it on. But it stops at the android character with the thing spinning in its stomach. I've tried installing livesuit but i cant find any drivers so my computer can't recognize the tablet (also tried Pdanet).
Now I have no idea what to do?
Anyone know how i can fix it?
Excuse my english.
Help appreciated!
/ Robin
nöt said:
Hi.
My dad bought an Ampe 10 and one day it simply didn't start. So I'm trying to fix it.
I'm suppose to be able to get into a recovery menu if i hold volume - and power it on. But it stops at the android character with the thing spinning in its stomach. I've tried installing livesuit but i cant find any drivers so my computer can't recognize the tablet (also tried Pdanet).
Now I have no idea what to do?
Anyone know how i can fix it?
Excuse my english.
Help appreciated!
/ Robin
Click to expand...
Click to collapse
you might want to also try asking over at slatedroid (they have a forum dedicated to that tablet).
sorry i can't be more help.
Hi Everyone, i'm a new user; I want to tell you my problem, please help me !!
About 2 weeks ago, my ZTE Grand S Lite decided to crash, completely alone, without my intervention (every process process ended abnormaly); after various attempts to restart I was able to use it even for a day, and the next day in the morning, same story! I tried about 20 restarts, but to no avail, he continued to crash, until the phone has rebooted with a black screen with the title written as "Encryption unsuccesful" and quoted below in English that it was necessary to perform an hard reset for use the phone, as it was not possible to access the internal memory (attach image similar: ). Not to perform the hard reset while traveling around, and wanting to wait to get home to try to back up, I pressed the power button and the window appeared "Off" and "Reboot", I tried to press on reboot with the hope of returning to the loading Home. From that moment the phone was never turned over, not by any sign of life, except the red LED charging when connected to the mains.
After losing a week to contact several assistances, I had to give up the speech guarantee, based (as usual) on myself.
Searching the internet, I realized that the phone went Hard Brick, I tried several tools and keyboard shortcuts, getting to the point that what would work for me, would be the use of Flash Tool, to flash the phone completely.
So I:
- Open the phone
- Disconnect the battery (integrated)
- Connected to the computer and installed drivers to recognize it as "Mediatek USB Port (COM9)"
- Downloaded a ROM similar from Needrom.com (because I can not find the official ROM!)
- Launched Flash Tool (Version 3, but also version 5) as administrator
- Selected the scatter file (downloaded from the Internet, compatible processors MTK6589: http://www.academia.edu/8295186/MT6589_Android_scatter_emmc_PMT)
Then I tried in different ways to select or all fields, or only the PRELOADER, and the download starts, when I connect the phone, either by holding down the VOL + or VOL -, started the red line, but came to 100% , seemed to me an error dialog "BROM ERROR: S FT ENABLE DRAM FAIL (4032)". So after several attempts, I have replaced the file PRELOADER with one downloaded from the web (http://forum.xda-developers.com/showthread.php?t=2437902), so repairing the problem of error 4032, but having the problem Flash Tool loads the red line up to 100%, remaining then stops there (without reporting errors) for even 30 minutes! I read that should instead go first with a yellow line and then purple, or the opposite!
Could you help me please? I do not know what to do and I would not have to spend an additional € 200 for a new phone ... I would be very grateful, I wait answers,
Thanks!
(Sorry for my English)
HELP!
Please help me !!
Anyone with a little experience with Flash Tool !
Nobody ?
:crying:
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Please help me guys
device : Lenovo s5000-h
android version: 4.4.2
here's what happen, my tablet got slower because of too much apps. Installed by my daughter now, what i did is hard reset it,then after formatting it was successful, now after that it says the device needs to be updated, after it downloaded the update then ask for a reboot, after that it started to install the update, im not doing anything and wait the suddenly it say failed to updated.. After that i rebooted it again, now im stuck on starting screen after the lenovo logo appears... I provided some screenshots... I dont know what to do please help me anyone who is good in this... Any advice and help would be pretty much appreciated..
Regards vans
With my tablet this extacly issue happens but I tried pressing Power OFF and only VOLUME UP !! trigger then a chinese menu appeard. Here it is opposite as to the menu in English, because you use volume up to accept and volumne down to go through different modes - select the only option that contains some letters in English (smth like e MMC...) : this will bring your tablet to the point as if it was recently purchased so you will need to start from setting it up again, but it works again and very smoothly. hope it will help!. You can watch detail for this process in Lenovo S5000 Tablet Manual. Good luck.
Hi ! I have a Mstar S700 and a few days ago I did a Rom upgrade with SP_MDT_exe_v3.1504-A2015.03.18-v06-customer,
followed the instructions from my Mstar site, got it done, and when i turn on the phone it was asking me privacy protection pass!
I searched the net and in my way to solve that problem, the phone wont start at all!
I used Sp flash tools, Format with and without BootLoader then Download all! But still same problem!
If plug the phone to usb-pc or at chargeing, and press on button, and connect discconect the cable several times, for a
split second appears the logo or the batter charge but that's it!
Please if someone can help me, i tried 3 days with no result and i m hopeless !
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!