Hi ! I have a Mstar S700 and a few days ago I did a Rom upgrade with SP_MDT_exe_v3.1504-A2015.03.18-v06-customer,
followed the instructions from my Mstar site, got it done, and when i turn on the phone it was asking me privacy protection pass!
I searched the net and in my way to solve that problem, the phone wont start at all!
I used Sp flash tools, Format with and without BootLoader then Download all! But still same problem!
If plug the phone to usb-pc or at chargeing, and press on button, and connect discconect the cable several times, for a
split second appears the logo or the batter charge but that's it!
Please if someone can help me, i tried 3 days with no result and i m hopeless !
Related
Hi Everyone, i'm a new user; I want to tell you my problem, please help me !!
About 2 weeks ago, my ZTE Grand S Lite decided to crash, completely alone, without my intervention (every process process ended abnormaly); after various attempts to restart I was able to use it even for a day, and the next day in the morning, same story! I tried about 20 restarts, but to no avail, he continued to crash, until the phone has rebooted with a black screen with the title written as "Encryption unsuccesful" and quoted below in English that it was necessary to perform an hard reset for use the phone, as it was not possible to access the internal memory (attach image similar: ). Not to perform the hard reset while traveling around, and wanting to wait to get home to try to back up, I pressed the power button and the window appeared "Off" and "Reboot", I tried to press on reboot with the hope of returning to the loading Home. From that moment the phone was never turned over, not by any sign of life, except the red LED charging when connected to the mains.
After losing a week to contact several assistances, I had to give up the speech guarantee, based (as usual) on myself.
Searching the internet, I realized that the phone went Hard Brick, I tried several tools and keyboard shortcuts, getting to the point that what would work for me, would be the use of Flash Tool, to flash the phone completely.
So I:
- Open the phone
- Disconnect the battery (integrated)
- Connected to the computer and installed drivers to recognize it as "Mediatek USB Port (COM9)"
- Downloaded a ROM similar from Needrom.com (because I can not find the official ROM!)
- Launched Flash Tool (Version 3, but also version 5) as administrator
- Selected the scatter file (downloaded from the Internet, compatible processors MTK6589: http://www.academia.edu/8295186/MT6589_Android_scatter_emmc_PMT)
Then I tried in different ways to select or all fields, or only the PRELOADER, and the download starts, when I connect the phone, either by holding down the VOL + or VOL -, started the red line, but came to 100% , seemed to me an error dialog "BROM ERROR: S FT ENABLE DRAM FAIL (4032)". So after several attempts, I have replaced the file PRELOADER with one downloaded from the web (http://forum.xda-developers.com/showthread.php?t=2437902), so repairing the problem of error 4032, but having the problem Flash Tool loads the red line up to 100%, remaining then stops there (without reporting errors) for even 30 minutes! I read that should instead go first with a yellow line and then purple, or the opposite!
Could you help me please? I do not know what to do and I would not have to spend an additional € 200 for a new phone ... I would be very grateful, I wait answers,
Thanks!
(Sorry for my English)
HELP!
Please help me !!
Anyone with a little experience with Flash Tool !
Nobody ?
:crying:
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Helllo guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
Lackted said:
Helllo guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
Click to expand...
Click to collapse
Hi,
Looks like there is no dedicated forum for your device but you can try asking your question here http://forum.xda-developers.com/android/help for better help and support.
Good luck.
Hi Experts,
I was doing factory reset and my battery died in the middle of the process since then my phone is stuck at usb logo whenever i connect to pc/or turn it on it doesn't do anything.
asus.com/zentalk/data/attachment/forum/201501/16/182639lnd5bpp2db5yb5ub.jpg
s3.postimg.org/gfdfrfcz6/20150925_163022.jpg
4.postimg.org/9u8d47rst/20150925_164818.jpg
s11.postimg.org/dw1n6sajn/20150925_164917.jpg
I shout out to all the experts to help me as i have gave up try to almost all the solution online for doing flash firmware but no avail .
i just dont know which one is for myphone and how i have to install it.
PS Phone is not rooted.
Appreciate all ur help
Hello....Few days ago my phone asked for an update without wire....i downloaded it and asked for install so i did...after restarting it stoped work...was the dead android on display...so today i downloaded the sp flash tool and i got a recovery file for my phone and the scatter file...and i tryed to install. Turned few colors on and at the finish sayed something about rom but i didnt read just pressed the ok...then didn't turned on anymore...when i connect it via usb...pop's the sound on and for 1 sec shows up in device mananger and then get off continuously...Can i do something to It? can i bring it back to life?
Hi,
I can't find a relevant thread for your device and issue, but you could ask for help here...http://forum.xda-developers.com/showthread.php?t=2259645
Good luck!
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Issou said:
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Click to expand...
Click to collapse
Try to install drivers and then try with panasonic....