Hi Everyone, i'm a new user; I want to tell you my problem, please help me !!
About 2 weeks ago, my ZTE Grand S Lite decided to crash, completely alone, without my intervention (every process process ended abnormaly); after various attempts to restart I was able to use it even for a day, and the next day in the morning, same story! I tried about 20 restarts, but to no avail, he continued to crash, until the phone has rebooted with a black screen with the title written as "Encryption unsuccesful" and quoted below in English that it was necessary to perform an hard reset for use the phone, as it was not possible to access the internal memory (attach image similar: ). Not to perform the hard reset while traveling around, and wanting to wait to get home to try to back up, I pressed the power button and the window appeared "Off" and "Reboot", I tried to press on reboot with the hope of returning to the loading Home. From that moment the phone was never turned over, not by any sign of life, except the red LED charging when connected to the mains.
After losing a week to contact several assistances, I had to give up the speech guarantee, based (as usual) on myself.
Searching the internet, I realized that the phone went Hard Brick, I tried several tools and keyboard shortcuts, getting to the point that what would work for me, would be the use of Flash Tool, to flash the phone completely.
So I:
- Open the phone
- Disconnect the battery (integrated)
- Connected to the computer and installed drivers to recognize it as "Mediatek USB Port (COM9)"
- Downloaded a ROM similar from Needrom.com (because I can not find the official ROM!)
- Launched Flash Tool (Version 3, but also version 5) as administrator
- Selected the scatter file (downloaded from the Internet, compatible processors MTK6589: http://www.academia.edu/8295186/MT6589_Android_scatter_emmc_PMT)
Then I tried in different ways to select or all fields, or only the PRELOADER, and the download starts, when I connect the phone, either by holding down the VOL + or VOL -, started the red line, but came to 100% , seemed to me an error dialog "BROM ERROR: S FT ENABLE DRAM FAIL (4032)". So after several attempts, I have replaced the file PRELOADER with one downloaded from the web (http://forum.xda-developers.com/showthread.php?t=2437902), so repairing the problem of error 4032, but having the problem Flash Tool loads the red line up to 100%, remaining then stops there (without reporting errors) for even 30 minutes! I read that should instead go first with a yellow line and then purple, or the opposite!
Could you help me please? I do not know what to do and I would not have to spend an additional € 200 for a new phone ... I would be very grateful, I wait answers,
Thanks!
(Sorry for my English)
HELP!
Please help me !!
Anyone with a little experience with Flash Tool !
Nobody ?
:crying:
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
Dear Friends,
I am Arindom Samajdar from India. Though I did not have any theoretical learning over android programming, I got a lot of helps & knowledge from XDA Threads on this specially on rooting of android phones. And truly speaking from following the guides of this forum I really rotted my Xperia SP (C5302) successfully about 6 months before and installed CM11 Rom via CWM recovery mode in it.
I was using it flawlessly till 10 days back also. But 10 days before I planned to roll back it to its stock Sony Rom as I was planning to sell it & get a new phone.
But at this time I did not studied mutch & simply started to flash the .tft file of the stock rom which I had prepared long back by the help of Flashtool, when I was rooting my device first. But this time during flashing the file there gone something very wrong and the flashing could not completed over night also & unfortunately during this process battery of my phone drained out & the flashing interrupted. When I checked my phone in morning, I found that it is in switch off condition. When I connected it to charger, first it shows bright green light in its notification light (like it gives while connecting in Flash mode), after 1 or 2 mins it gives Red light with SONY logo in its screen & stayed as it is for another 1 or 2 mins. Then again green light and after some time again red light with SONY logo. And continues this loop. While I tried to switch it on it just vibrate & gives SONY logo on screen, nothing else & after some times goes off.
After several studies over the websites & XDA forums, I understood that there was a error occurred while flashing Kernel. But when I tried to fix it by the methods suggested over the webpages, I got nothing to work for my device as for every process (be it by Flash Tool or by CMD window of windows) the flashing is not being started at all while I am trying to flash the Kernel & after an hour also when I am disconnecting my phone, CMD or Flash tool is showing error of Flash failure & stating it as "Too many Links". I can't understand what this meant to.
My device being connected with PC via Flash Tool both in Flashmode & Fast Boot mode, that means my device is only soft bricked & I am sure that there must be some way to get it back working.
Please help me guys..
Hi, thank you for using XDA Assist. See if this helps, http://forum.xda-developers.com/showthread.php?t=2708815 Also, maybe this, http://forum.xda-developers.com/showthread.php?t=2311964
Hi Friend, Thanks for your reply. But my issue is not with the ftf file. I am having the ftf file. My issue is flashing of the same.
Whenever I am trying to flash the ftf file it does not go beyond "Flashing Data" stage. And when I try to flash only Kernel, it does not starts yet.
Sent from my Nexus 5 using XDA Free mobile app
Thread closed.
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
strix666 said:
dear friend
i have y511-u30...unfortunately i wipe system partition and my phone hang on start and i have not access to recovery or anything.i found a article about flash phone with sp flash tools and i did it but now my phone do not turn on at all and in sp flash tools not found my phone .in my computer (win7) in device manager for some second comes an item : Android usb ethernet/rndis and after seconds gone.please help me with this .i really need my phone.thanks
Click to expand...
Click to collapse
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
paywand said:
hello strix666 unfortunately your problem may not be fixed for some causes :
1. your phone is a low quality phone (sorry for saying that)
2.before huawei created the phone some documents leaked and many companies created clones with much lower quality
3. this is a common problem with this model of huawei phone so don't be surprised if it has gone BRICKED without anything
and i wanted to know what were you doing with the phone (with details) before that happens and did you try to had reset it?
Click to expand...
Click to collapse
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
strix666 said:
Dear sulaimaniyah,
thank you and i appreciated for honest answer, i instal a recovery that support touch and have so many features (recovery_TWRP_2.6.3.0) . i go to wipe section and wipe system partition.after restart phone my phone just stay on the logo huawei and do nothing.i try to flash my phone with SP flash tools but after 2time failed in process (i think because of wrong files that i chosen) .that logo doesn't show and my phone doesn't turn on and show nothing .in my computer in device manager comes an item with name Android Usb Ethernet/rndis but with yellow mark and i try so many drivers but still nothing.and for hard reset i have not access to any function.
Click to expand...
Click to collapse
dear strix666
i'm very sorry but the (recovery_TWRP_2.6.3.0) is a recovery used for lenovo phones specially lenovo p780 and as the most common results there are 3 things that happen :-
1. the phone gets bricked possibility : %70 (your current phone situation)
2. the phone gets stuck in a boot loop possibility : %22 ( thats what happened to your phone at the first flash )
3. the phone stays safe and nothing happens possibility : %8 ( impossible )
and so after you tried to fix it by flashing it 2 times again it is commonly bricked which can't be fixed easily and the only way to fix it is by using apps similar to odin.
but before that i need to need know some other details :-
1. does it charge or show the charging icon?
2. try to hold the volume down and power key for about 15 seconds anything happened?
3. connect it to your pc and go to | start menu > devices and printer > right click your device > troubleshoot
and if it doesn't appear please tell me.
by the way my name is paywand and sulaimaniyah is my city
Hi ! I have a Mstar S700 and a few days ago I did a Rom upgrade with SP_MDT_exe_v3.1504-A2015.03.18-v06-customer,
followed the instructions from my Mstar site, got it done, and when i turn on the phone it was asking me privacy protection pass!
I searched the net and in my way to solve that problem, the phone wont start at all!
I used Sp flash tools, Format with and without BootLoader then Download all! But still same problem!
If plug the phone to usb-pc or at chargeing, and press on button, and connect discconect the cable several times, for a
split second appears the logo or the batter charge but that's it!
Please if someone can help me, i tried 3 days with no result and i m hopeless !
Hello Users,
I've the following problem: A few days ago my about 3-year old Motorola RAZR HD XT925 (O2 Germany) stuck in using and I tried to restart it with holding "power" and "volume down". After that my phone seemed to boot but stuck at the pulsing "M"-Logo. Nothing happens. I do not have any experience with flashing smartphones and all this stuff so I started to read here and on other websides how I could solve my problem and I came up to this page here in the forum: [TUTORIAL] How to Flash Stock Motorola Fastboot files.
Tried to do everything like shown but I came up to the step where I start RSD Lite (tried v6.1.4 and v6.2.4) and my phone should be listed but it does not. ATB & Motorola USB Drivers are installed, but when I start the Utility the programm is searching for update but finds nothing. (I think it can't cause my phone can't get into mass-storage-mode without booting, or?) Fastbootmode seems ok, everything like it should be.
Can't figure out how I should get my phone shown in RSDLite.
So if anyone could help me I would be so thankful, cause I really love my RAZR and don't want to bury it! Additional needed information and/or pictures are no problem if needed!
Thanks in advantage!
(I apologize for any kind of grammar/spelling faults!)
Edith says: phone runs on Stock-Android (updated to 4.4.2).
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!