Database Info

[Q] Motorola Defy bricked after using bootloader and restarting device

I've looked through the forums. (if I missed the question I am about to ask in the forums, can someone link me to it? I am new and this is my first time posting, but I have used this forum to help me before)Well...Where do I begin....I rooted my Motorola Defy for the first time(this is my second Defy as my old on had hardware issues) and I decided to try to install a custom ROM(CM7). So I looked into it and downloaded Defy2int from the Android Market. I installed it and once it was done, I rebooted my phone and now it will not get passed the Motorola "M". It will load that "M" then turn off and start up again. Every time I plug it into the USB, a white light shows in the LED. I have tried factory reset and nothing. I know about the RSD lite, but my device is not connecting. Is there still a way to connect it? If so can someone please help me and work with me step by step so I do not mess up my phone further....Thank you :/

XChase said:
I've looked through the forums. (if I missed the question I am about to ask in the forums, can someone link me to it? I am new and this is my first time posting, but I have used this forum to help me before)Well...Where do I begin....I rooted my Motorola Defy for the first time(this is my second Defy as my old on had hardware issues) and I decided to try to install a custom ROM(CM7). So I looked into it and downloaded Defy2int from the Android Market. I installed it and once it was done, I rebooted my phone and now it will not get passed the Motorola "M". It will load that "M" then turn off and start up again. Every time I plug it into the USB, a white light shows in the LED. I have tried factory reset and nothing. I know about the RSD lite, but my device is not connecting. Is there still a way to connect it? If so can someone please help me and work with me step by step so I do not mess up my phone further....Thank you :/
Click to expand...
Click to collapse
Make sure you don't have any other USB connection made to your PC.I had same problem..Also if problem still exists try another system.

[Completed] [Q] M Horse (China Clone) Question.

Hello all, It's been awhile since I've been on.... A big while But things have changed a lot around and looks great, But on with my question. I have a M horse N9000W MTK6572, And recently tried a sys file restore using titanium backup and the process froze with a error stating that me deviceID had changed, Then the phone proceeded to reboot, But upon booting up it just stays on the android logo. Before this problem I was able to go into factory recovery as I only had the phone rooted but no custom recovery or firmware, And now no recovery using any button combo. I have asked a few on ebay if there jig or jtag would help but they all say not on the china clone as of yet. So is my phone a cool digital android desktop picture, Or is there a method someone knows
My pc nor mac recognize the device anymore either. Thanks in advance for any info or help

Hi,
I have searched and do not find information that is helpful.
With no recovery and no recognition from the computer, I'm afraid this is a hard brick.
Sorry, I know it is not what you wanted to hear. - support for almost any clone device is scarce at best.

[Completed] [Q] Unbrick ZTE Grand S Lite (S118) - Flash Tool MTK6589t

Hi Everyone, i'm a new user; I want to tell you my problem, please help me !!
About 2 weeks ago, my ZTE Grand S Lite decided to crash, completely alone, without my intervention (every process process ended abnormaly); after various attempts to restart I was able to use it even for a day, and the next day in the morning, same story! I tried about 20 restarts, but to no avail, he continued to crash, until the phone has rebooted with a black screen with the title written as "Encryption unsuccesful" and quoted below in English that it was necessary to perform an hard reset for use the phone, as it was not possible to access the internal memory (attach image similar: ). Not to perform the hard reset while traveling around, and wanting to wait to get home to try to back up, I pressed the power button and the window appeared "Off" and "Reboot", I tried to press on reboot with the hope of returning to the loading Home. From that moment the phone was never turned over, not by any sign of life, except the red LED charging when connected to the mains.
After losing a week to contact several assistances, I had to give up the speech guarantee, based (as usual) on myself.
Searching the internet, I realized that the phone went Hard Brick, I tried several tools and keyboard shortcuts, getting to the point that what would work for me, would be the use of Flash Tool, to flash the phone completely.
So I:
- Open the phone
- Disconnect the battery (integrated)
- Connected to the computer and installed drivers to recognize it as "Mediatek USB Port (COM9)"
- Downloaded a ROM similar from Needrom.com (because I can not find the official ROM!)
- Launched Flash Tool (Version 3, but also version 5) as administrator
- Selected the scatter file (downloaded from the Internet, compatible processors MTK6589: http://www.academia.edu/8295186/MT6589_Android_scatter_emmc_PMT)
Then I tried in different ways to select or all fields, or only the PRELOADER, and the download starts, when I connect the phone, either by holding down the VOL + or VOL -, started the red line, but came to 100% , seemed to me an error dialog "BROM ERROR: S FT ENABLE DRAM FAIL (4032)". So after several attempts, I have replaced the file PRELOADER with one downloaded from the web (http://forum.xda-developers.com/showthread.php?t=2437902), so repairing the problem of error 4032, but having the problem Flash Tool loads the red line up to 100%, remaining then stops there (without reporting errors) for even 30 minutes! I read that should instead go first with a yellow line and then purple, or the opposite!
Could you help me please? I do not know what to do and I would not have to spend an additional € 200 for a new phone ... I would be very grateful, I wait answers,
Thanks!
(Sorry for my English)

HELP!
Please help me !!
Anyone with a little experience with Flash Tool !

Nobody ?
:crying:

Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Lenovo S856 China Unbricking tutorial

Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.

Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse

Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.

way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?

This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.

[Completed] Motorola RAZR M won't start? Need to recover data.

Hiya. I'm very new to all this. My phone randomly stopped working and will not start beyond the Motorola logo. I can get it into some bios-looking option screens but nothing else.
I've never modified my phone not have I set it to debug or rooting or flashing or rom'd or anything. I've been searching all over and installed a adb tool thing and a driver that only seems to work when the phone is sitting on a "fastboot" screen.
Anyway.. I would REALLY like to recover all my pictures and messages and what not.
Cheers in advance.

Hi !
Here is an usefull thread
https://forum.xda-developers.com/droid-razr-m/general/how-to-flash-firmware-rsd-lite-to-t3184005
Some more useful info here
https://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Good luck !