this is a major annoyance... I've had a Samsung i760 for a couple months now and have found it seems to have a serious design flaw.
I like to listen to music at work, through my phone using a wired headset (two way headset with mic). I work in a quiet office environment. I always set my ring to silent/vibrate while at work. If I'm listening to music, and happen to receive a call, the music will stop playing through the headset and will start playing through the built in speaker of the phone for all my coworkers and supervisor to hear.
The music would continue to play like this even after answering the call... I have to bring up the player and stop it manually. I was able to partially alleviate this by disabling the 'play in background' setting. With that, the music will still play through the external speaker briefly, roughly 3 seconds, before the player pauses the song. Which is still unacceptable.
I have tried TCPMP and Windows Media and had the same result.
Also, if I have the phone set to ring audibly, the ring is forced through the speaker as well, and the music I was listening to AND the ringtone will play at the same time for those 3 or so seconds.
what I'm hoping someone can help me with is a) a way to make ringtones play through the wired headset if possible, or b) at least keep the sound from being forced through the external speaker when the wired headset is connected and I recieve a call. As it stands, I either can't listen to music at work (a big part of why I bought the phone), or I have to turn the phone receiver off and risk missing calls. Either option sucks and is making consider another phone... though I don't know if this is a WM6 issue or an issue with this specfic phone.
any help would be greatly appreciated!
*bump* anyone?
any way thru the registry to disable the built in speaker alltogether while leaving the headphones operational?
On Acer s200, you can change the value of registry key HKLM\Software\Acer\Scenario\HeadsetIn to 1...
Maybe that can help...
Hi,
I searched the forum, wiki, etc., but didn't find an answer.
I have an AT&T Fuze with the stock ROM (WM 6.1). I know the Fuze is supposed to support multiple simultaneous bt connections. What I would like to do is connect A2DP to my Pioneer stereo for music playback, and also connect handsfree to my Jawbone 2 headset for phone calls while in the car.
I can successfully connect A2DP to my stereo for music by itself.
I can successfully connect HFP to my Jawbone 2 by itself.
I *have* managed to connect to both at the same time, by staying on an active phone call with my Jawbone, then telling my Fuze to connect to the car stereo. However, no music could be heard (from either Mortplayer or WMP). The phone call stayed up just fine though.
Anyone know if there's a way to get both working at the same time?
(And before you ask, I would just use the hands-free capability of my Pioneer stereo for phone calls too, but I've found my car is too noisy for anyone to hear me with the Pioneer's microphone unless I hold it right in front of my mouth, which defeats the "hands free" goal...)
Thanks for any help you can offer.
Best,
Chris
In your case I do not think that is possible since the concept of being able to juggle 2 devices at the same time requires 1 to relinquish control while the other goes active. It turns off the music so you do not get distracted while talking and reconects the music after the call is over.
It seems to be a software protocol if anything. Yes both can be connected at the same time, but both cannot be "active" as in doing both music playback and voice calls.
I have a bt headset that handles 2 profiles at once and according to the protocol, if a call comes in, it pauses my ipod and then picks up the call and then resets back to normal after the call.. Either you have to mess with the coding itself or someone has to come up with a workaround, but I do not think that is possible.
Thanks for the reply. I had hoped it might be possible for the Fuze to route stereo audio to one BT profile (A2DP), while non-stereo audio (e.g., phone call, system tones, etc.) to the HFP profile, almost as though the profiles acted as addressable "service ports" (ala HTTP, SMTP, etc.).
But, unlike with TCP/IP, I admit to knowing next to nothing about how the BT stack works and how profiles are applied to certain types of data (or, how data is routed to a given BT association based on profile).
Thanks again,
Chris
well the thing is.. the fuze can connect to multiple devices simultaneously, but based on the music and voice call order, it is prohibited from doing both at the same time. so therefore when there is no call, the music plays, but when a call comes it, the music is paused and resumed after the call is done. (obviously the call has higher priority here).
My only suggestion is to leave it as it is since it is done so that you do not get distracted while talking and probably while you're driving.
Multitasking is difficult when you're listening to 2 things, responding to 1, and driving at the same time. The more you multitask the less you are able to devote to your main activity (in your case, driving).
but yeah. if you can find someone who can mess with that and allow for both to be active at the same time, then congrats. Otherwise just think of it as a safety measure.
Except that, when I had both the headset and the stereo connected to the Fuze, the music *didn't* pause. It just didn't output (as though the volume was muted). In fact, in both Mortplayer and WMP, it appeared as though it was playing at ~2X the normal rate (just watching the track playback time counter).
I know what you're talking about re: listen to music, call comes in, music pauses, call ends, music resumes. That's the behavior I get when I use the car stereo for both handsfree and A2DP.
The behavior when connected to two different devices seemed to be different, though, so I hoped that might mean it was in fact possible.
-Chris
yeah I know what you mean, but maybe the fact that it tried to do both tripped it up and so it took the call as a higher priority and focused the data towards the call.
atleast that is what I think.
I have almost the exact same configuration, except I am using a Sony car stereo but have a jawbone. What I have to do every time I get in the car is the following.
1. Let my stereo connect to both hands free and wireless headphone services.
2. Open bluetooth settings
3. Manually connect to my Jawbone.
It works great.
ATT Fuze
Energy Rom 072209
Old jawbone
Sony XPLOD Car Stereo
I'll also add it's pretty neat to be able to push the jawbone to activate MS Voice Commander and choose what music I want to play over my car stereo.
frankrizzo said:
What I have to do every time I get in the car is the following.
1. Let my stereo connect to both hands free and wireless headphone services.
2. Open bluetooth settings
3. Manually connect to my Jawbone.
It works great.
Click to expand...
Click to collapse
Thanks for the reply. I'll give that a shot. I'm not sure that my Pioneer stereo will automatically connect both handsfree and A2DP. I know it will do handsfree automatically. We'll see...
-Chris
I used to have a Galaxy SII that was able to connect to my car stereo through bluetooth with no issue.
With the Tmobile One S, often time my phone does not full connect it will do things like only connect for phone use but not for listening to music. I also used to be able to control moving the songs and I can no longer do that. I also cannot get the metadata to show up on the car display.
Many times a reboot will hook the audio up and I can listen to music, but I still can only go forwards and backwards by using the phone.
Is anyone else having issues like this?
Yep, I got the same issues....A2DP sync problem.
Does it sync your phone contacts too. If so change what contacts are synced only allow google contacts. This was a solution for a similar issue in another thread.
Sent back in time to find Marty.
No, I don't sync my contacts...worked perfectly with MyTouch4G...also noticed headset droid and jays headset control take away Bluetooth control capability...anyone know a work around besides disabling?
Same issue here with my bluetooth headset (Cardo scala rider G4) and HTC One X.
Since installing Jays headset control for my Jays One+ (which is a one-button wired headset) my bluetooth headset control fails big time. I can only use my headset play functionality and after disconnecting the headset the music player starts playing music again within a couple of minutes.
I'll try to disable Jays headset control and let you know if this resolves my bluetooth problems.
how do/when do you select which contacts to send to headset? Didn't see an option for this in Bluetooth settings.
I received the Tmobile update today and I still have the issue of the phone not transmitting the metadata to my radio. Interestingly enough when I stream Pandora the data from pandora shows on my radio display.
Do any of you all know of a ROM that will allow the metadata to be sent from my phone to the radio?
This is the only thing that really annoys me about this phone. Thinking of selling it when the SIII comes out.
I've been setting up voice commands recently for use in my car. I have an HTC One M8, but I don't think my issue is device specific (this isn't really an issue per say, but a tweak that I think should be possible).
What currently happens is my phone connects to the stereo using A2DP bluetooth. It plays music and takes phone calls as it should. When I initiate a voice command, the music is paused, the stereo displays "voice ctrl", and the command is heard through the stereo microphone. The issue with this, is the stereo does not return to playing music after the command. I have to press the call button on the stereo to return to the music.
What I would like to have happen is when a voice command is initiated, the media volume is reduced (using Tasker), and the phone microphone is used without triggering the stereo.
I've searched a fair amount, but haven't found any solution for defaulting to the phone mic when bluetooth is connected. I'm convinced there has to be a way to do it, what am I missing?
Solved it once
I have a Htc Desire 600, and my way of solving it is at the call menu there are small icons while on call, there's a bluetooh option, phone option and a handsfree option, i kept the phone option on default, hope that helps
Cheers!
Hello all
One of the issues I have with Bluetooth on this phone is that the controls aren't granular enough. I want to be able to make and answer phone calls in my car using the Bluetooth connectivity, however, when I turn Bluetooth on, Google Now and Maps also try to send their audio to the car speakers, and either A) you can barely hear the voice, or B) it doesn't work at all and I hear nothing (this is especially true when I'm playing other music media in the car that isn't coming from the phone).
Is there any way (or is there an app) that can redirect Google Now and Maps to continue to use the phone speaker, while phone calls can go through the car? Right now it seems like it's the same setting to control both phone calls and audio output from apps.