[Completed] Motorola Xt907 Verizon Completely Bricked Need Help - XDA Assist

Hi friends How r u This is Saad ! i need help about my motorola xt907 the problem is the phone is now totally bricked and when i try to update it on stock firmware it gives me.
failed flashing process 1/20 partition gpt main or failed flashing process 1/19 gpt etc..........
Also when i go to ap flash mode it shows
(Phone is Locked status code 0)
I try everything to unlock my bootloader i try droid razr uitlity for xt907 but that didnt work .I tried alot of stock firmwares but the flashing process always failed with new errors. I also try the bootloader online unlocking on motorola official website but the answer return as your "Your device does not qualify for bootloader unlocking"
ANY HELP WILL BE GREATLY APPRECIATED
THANKS IN ADVANCE

saadshaikh said:
Hi friends How r u This is Saad ! i need help about my motorola xt907 the problem is the phone is now totally bricked and when i try to update it on stock firmware it gives me.
failed flashing process 1/20 partition gpt main or failed flashing process 1/19 gpt etc..........
Also when i go to ap flash mode it shows
(Phone is Locked status code 0)
I try everything to unlock my bootloader i try droid razr uitlity for xt907 but that didnt work .I tried alot of stock firmwares but the flashing process always failed with new errors. I also try the bootloader online unlocking on motorola official website but the answer return as your "Your device does not qualify for bootloader unlocking"
ANY HELP WILL BE GREATLY APPRECIATED
THANKS IN ADVANCE
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Usually, (at least in the case of HTC's) if you are trying to go back to their stock you need a (re-)locked bootloader anyway. So the problem you are getting could be unrelated, and more like a bad download.
Check out the [HELP THREAD][Motorola Droid Razr M][XT907/XT905] Ask ANY Question. Noob Friendly thread of the > Motorola Droid RAZR M > Droid RAZR M Q&A, Help & Troubleshooting forum to share your predicament there, as that is where your device experts can be found.
Hope this helps, and good luck!

Related

[Q] xt910 downgrade

Hi xdadevelpers team unfortunately i have installed an unoficial rom for my device from this link http://forum.xda-developers.com/showthread.php?t=2069935 it works very good and no thing wrong with it but i have to send my phone to the Authorized agent here in egypt because of a problem at the sim card place in the phone so i need to get back to the official kernal which is ics is there any way to do this please help me
have you noticed, that this is the Razr HD section ?
And yes. MOAR fonts
Though you are indeed in the wrong forum, i'll help you out
There are 2 possibilities:
1. Your bootloader is unlocked:
Grab the appropriate Stock FW here: XT910 Stock Firmwares
And flash your phone according to this guide: http://www.andromods.com/tips-trick/how-to-restore-unroot-droid-razr-m-xt907-stock-original-firmware.html
Though the guide is for the xt907, it'll also work for xt910. As long as your BL is unlocked...
2. Your bootloader is locked and you're on safestrap:
Watch this
And above all: Next time post your question here: Droid RAZR Q&A
Xadro said:
Though you are indeed in the wrong forum, i'll help you out
There are 2 possibilities:
1. Your bootloader is unlocked:
Grab the appropriate Stock FW here: XT910 Stock Firmwares
And flash your phone according to this guide: http://www.andromods.com/tips-trick/how-to-restore-unroot-droid-razr-m-xt907-stock-original-firmware.html
Though the guide is for the xt907, it'll also work for xt910. As long as your BL is unlocked...
2. Your bootloader is locked and you're on safestrap:
Watch this
And above all: Next time post your question here: Droid RAZR Q&A
Click to expand...
Click to collapse
I'm so sorry that i did that mistake and i'm on my way to try your way thanks but also i have saved cid is it works and how to use it ?
mostafas60 said:
I'm so sorry that i did that mistake and i'm on my way to try your way thanks but also i have saved cid is it works and how to use it ?
Click to expand...
Click to collapse
What do you mean by saved cid? Is your phone carrier locked? Or what are you trying to say? You should pick a stock fw, which is at least your country/region better also from your carrier. It may also not be available at the site i mentioned.
If it is not available you could try and make a request. See the op of this thread
There is no such thing as an "unlocked bootloader" XT910 nor any other OMAP chipset Motorola device unless it is an engineering model with an NS bootloader.
There is no OEM unlock available for those devices and there never will be as the bootloader was never designed to be unlocked.
Motorola themselves have stated as much publicly.
This person has wiped their CID. partition in order to successfully flash a firmware from a different region onto his device.
He should seek advice in the proper forum fro those who have experience with this type of cross flashing issue.
It is precisely as a result of the locked bootloader status of these devices that these kinds of issues arise when users attempt to update their device with firmware not intended for their specific hardware or regional configuration.
Uh thanks for the heads up, wasn't aware of that. I assumed that motorola devices would be all similiar with this.
cellzealot said:
There is no such thing as an "unlocked bootloader" XT910 nor any other OMAP chipset Motorola device unless it is an engineering model with an NS bootloader.
There is no OEM unlock available for those devices and there never will be as the bootloader was never designed to be unlocked.
Motorola themselves have stated as much publicly.
This person has wiped their CID. partition in order to successfully flash a firmware from a different region onto his device.
He should seek advice in the proper forum fro those who have experience with this type of cross flashing issue.
It is precisely as a result of the locked bootloader status of these devices that these kinds of issues arise when users attempt to update their device with firmware not intended for their specific hardware or regional configuration.
Click to expand...
Click to collapse
Thanks a lot for your supply actually you did understood what happened with me
But now i faces problem i tried to get back to 2.3.6 and the phone stopped working totally and after two days of searching i found some way to get back to ics but it is opening only from Bp tools from the boot menu can you help me in that ?
mostafas60 said:
Thanks a lot for your supply actually you did understood what happened with me
But now i faces problem i tried to get back to 2.3.6 and the phone stopped working totally and after two days of searching i found some way to get back to ics but it is opening only from Bp tools from the boot menu can you help me in that ?
Click to expand...
Click to collapse
guys is there any one can answer me and how to solve this issue
http://forum.xda-developers.com/forumdisplay.php?f=1622
mostafas60 said:
guys is there any one can answer me and how to solve this issue
Click to expand...
Click to collapse
Probably if you go to the right forum man.
Sent from my PACMAN MATRIX HD MAXX

[Q] Confuse about Booloader & Rooting

Hey Guys, I decide to unlock the bootloader and root my Moto G so i start to read about it and preparing everything to do it in my pc (drivers, etc)
But when i start to read de Resource Guide Thread in the General forum i read something that confuse me specifically in the Root part that says:
"If you do not have or do not wish to unlock your bootloader then you can opt for @oasoas014 's method ( http://forum.xda-developers.com/showthread.php?t=2583652 ) of bootloader downgrade. You may also visit @Cooptx's more detailed guide ( http://forum.xda-developers.com/showthread.php?t=2585755 ) . Note, with the most recent recoveries, you do not need to downgrade your bootload"
But reading the @Cooptx's method says that need unlock bootloader, i really dont understand the @oasoas014 's method but reading all the comments says also that i need unlock bootloader.
So im kinda confuse here, is that im not reading well? or i just need to unlock it? someone can give me a strait answer?
You must unlock bootloader if you want root, there is not other solution for moto g atm. Maybe in future there will be an exploit to root bypassing bootloader like on moto x but not now.
Thanks you, the info is kinda confuse, im gonna put me in to work. Hope eveything goes well
bozzett0 said:
Thanks you, the info is kinda confuse, im gonna put me in to work. Hope eveything goes well
Click to expand...
Click to collapse
It's not that much work and Motorola makes it really easy to unlock the bootloader If you still need some help or run into trouble let us know!
hey
i tried to unlock bootloader via motorola web site but it says my device does not qualify for unlocking
tried flashing recoveries, root zips and updated to official kitkat, but still does not work
phoned motorola support and they said motorola doesn't guarantee bootloaded getting unlocked, it depends on luck
any suggestion?
Moto XT1033 Dual 16gb BR
pedrofortunato said:
hey
i tried to unlock bootloader via motorola web site but it says my device does not qualify for unlocking
tried flashing recoveries, root zips and updated to official kitkat, but still does not work
phoned motorola support and they said motorola doesn't guarantee bootloaded getting unlocked, it depends on luck
any suggestion?
Moto XT1033 Dual 16gb BR
Click to expand...
Click to collapse
Did they use the word " luck "?
Sent from Samsung Chat
jaspreet997 said:
Did they use the word " luck "?
Sent from Samsung Chat
Click to expand...
Click to collapse
not that word but she said it might work as it might not work, and there's nothing me or motorola could do about it

relock bootloader on Electrify M xt901

I want to reloack my bootloader on my Motorola Electrify M xt901 and read on the Motorola site that is possible if you can find a " Motorola signed image " for my device. I got a hold of them but they will give it for there newer devices but will not support mine. Any help on this matter will be appreciated.
Billc47 said:
I want to reloack my bootloader on my Motorola Electrify M xt901 and read on the Motorola site that is possible if you can find a " Motorola signed image " for my device. I got a hold of them but they will give it for there newer devices but will not support mine. Any help on this matter will be appreciated.
Click to expand...
Click to collapse
according to the information i found on your phone, once you unlock the bootloader it can NOT be re-locked.
i could be wrong, but that's the answer i read from a couple post of your exact question.

[Completed] Help!!! MOTO E 2nd gen BRICKED......

I'm new to this thing. i tried to root without knowing to unlock bootloader first and suddenly not able to get tru to flashmode.. i tried to unlock bootloader but I forgot to check oem unlock under Developer's Setting. Now i can't flash stock rom to fix this.. There's another way to fix/ enable oem unlock w/out using the device coz it's already Bricked i can't get tru.. Anyhelp would be appreciated..
XDA Visitor said:
I'm new to this thing. i tried to root without knowing to unlock bootloader first and suddenly not able to get tru to flashmode.. i tried to unlock bootloader but I forgot to check oem unlock under Developer's Setting. Now i can't flash stock rom to fix this.. There's another way to fix/ enable oem unlock w/out using the device coz it's already Bricked i can't get tru.. Anyhelp would be appreciated..
Click to expand...
Click to collapse
Hello,
Please register for a XDA Account and try posting your query here Moto E 2015 Q&A forum, the experts there maybe able to assist you.
-Vatsal

bootloader preflash validation failed moto xt926 plz help

im new about moto flash before it was ok just for some issue i went for it
i was flashing moto xt926 via utility pc method
but during flashing now its not working fine im searching many ideas from google but no one has solution
plz help me any way to bring it ok??
Seems like your bootloader is locked and you are either trying to downgrade of flash a custom image. You will need to unlock your bootloader first.
abidalimallah said:
im new about moto flash before it was ok just for some issue i went for it
i was flashing moto xt926 via utility pc method
but during flashing now its not working fine im searching many ideas from google but no one has solution
plz help me any way to bring it ok??
Click to expand...
Click to collapse
Exactly what is wrong with the device and what were you doing when it acted up?
if mobile are not on ok condition its just show only hanged on logo nd others matter also like unfortunately application closed so we cant unlock bootloader

Categories

Resources