Related
data2whatever v0.2
UPDATE: For the new test version of v0.3 and v0.4 look at the end of the post.
Features:
- Supports: Ext2, Ext3, Ext4 (and if kernel supports it: ) btrfs, ReiserFS
- Supports loop device as optional addon (as siberes data2sd)
- Flashable zip for many app2sd ROMs (no long setup required)
- It does a e2fsck (disk check) on every boot and creates a logfile on the sdcard (/sdcard/e2fscklog.txt)
- looks nice if you do a logcat on boot
- no "settings lost on reboot" bug like in my old or siberes script
- changes the scheduler for the sd-card and internal to noop for better performance on sd.
- Nandroid Backup of EXT2/3/4 external with AmonRa 2.0.0.1 or any clockwork recovery.
- Removes the common app2sd scripts on its own
Requirements
- A second partition (same as app2sd - Min 512 mb - 1024mb is highly recommended - max 2048 MB or there will be issues with market) in any format (as long as the kernel supports - ext2/3/4 support is default in most kernels - Ext4 or ReiserFS is recommended).
- An app2sd or non app2sd ROM (data2sd versions wont work) (this SHOULD work with most or at least many ROMs . Roms that are confirmed to work can be found in the post below. Please report to me it it works or not so i can update this thread. If it doesn't work i try to make it compatible asap. )
Installation
1.) Full wipe (at least needed on first installation)
2.) Flash the app2sd Version of the ROM of your choice
3.) DONT REBOOT
4.) If you rebooted then start over at 1.)
5.) flash the attached "data2whatever.zip"
6.) now reboot
ADDITIONAL INFO: Even without "life on the edge" you should watch the first 4 "don't"s of "life on the edge". The normal script use the same disk safety methods as NTFS on Windows or EXT4 on linux. But as you know you shouldnt just switch off the computer because there can still be issues in very rare cases. Reboots with tools like "snqs power menu" is the same as a batterypull (or pulling the ac plug on PC) and this isn't good in general (and this also applies for using it with app2sd). If you want to go to recovery just make a normal shutdown and switch the phone on with "volume down" button pressed.
Optional life-on-the-edge add on
EDIT: Life on the edge causes reboots. Don't use it for now.
This patch has the same effect as sibere's and ownhere's script (loop device - the way ownhere does in v4 doesnt work though). Other than those scripts it this addon doesnt need any repartitioning or other setup (like FAT or a third partition) and can simply be installed or removed with a flashable zip. All you need for this is a normal ext 2/3/4 partition (as above ^^). Ext4 is recommended for this (as above) since it is the fastest of those 3. This patch is more risky than normal ext3/4 considering the possibility of data loss. If you want to use this add-on you should watch the following (this also applys to ownheres and sibere script and is NOT more risky than their scripts):
- DON'T use the reboot of snq's powermenu (or any other reboot app)
- DON'T use anything in the "ROM Manager" that makes it reboot.
- DON'T do adb reboot / abd reboot recovery / adb reboot bootloader
- DON'T pull the battery while the phone is on (this should be obvious)
- DON'T remove the "sync" mount options for the Quadrant "boost" (this is a fake boost anyway)
All of this is like a powerloss for the sd-card and has a high change of data corruption.
From my test with this i give you an estimate what can happen if a powerloss occurs or any of the 5 points above happen:
- 50% general chance of corruption that will be autofixed on boot (not a problem)
- 10% chance of forcecloses after reboot of some apps (this can be fixed by deleting the app data or restoring it with titanium (or other) backup)
- REALLY tiny chance (didnt happen for me in over 40 "simulated" powerlosses) that partition gets corrupted (needs complete repartitioning of the microSD so all data on it will be gone then)
As long as you watch the 5 points above and as long as you don't drop the phone and the battery jumps out this will be safe.
Installation of the addon:
- Flash the "life-on-the-edge.zip" any time after you installed "data2whatever".
Installation of the addon:
- Flash the "life-on-the-edge-UNPATCH.zip" any time after you installed "data2whatever" and the addon. (this will revert back to the normal script)
Personal remark: While this is a improvement over normal ext4 it is not the "holy-grale" of a data2sd lag fix. I'm not using this myself and use a ReiserFS as second partition instead which is more safe and completly feels the same as a "loop" device considering performance.
Further Plans
- Changes for the mount options of the internal YAFFS2 Partition to optimize the speed of the "dalvik-cache" (have to look into YAFFS2 what can be done)
- Make Roms that doesn't work yet compatible to this
Thanks:
- cyanogen who made app2sd+ in the first place.
- sibere and ownhere who started all the data2sd.
- supercurio and Unhelpful of SGS' Voodoolagfix (#Project-Voodoo on freenode) for their helpfull script tipps.
- Coutts99 and Neophyte for their Kernels.
- woti23 for all those test's in this thread.
- All devs of XDA in generall for all this nice stuff that is done here
UPDATE: Test version of v0.3 and v0.4:
BOTH NEED A FULL WIPE BEFORE INSTALLED FOR THE FIRST TIME.
Please make a logcat of the first boot. This can help me to find possible issues.
This version now checks if your second partition is aligned and if not it will ERASE it and recreate it aligned. You will find more info about alignment later here (in the meantime you can google "ssd alignment" to get some info).
WARNING: THIS WILL ERASE THE SD-EXT PARTITION IF IT IS NOT ALIGNED. On top of that there is a little risk that it messes up the partition table. Although i made a lot of test with this and added busybox to assure compatibility there could still issues with it. If something should go wrong in recreating the partition you may have to REPARTITION the COMPLETE Sd-card. So make a BACKUP OF ALL YOUR DATA ON THE SD before you test this .
Additional info: Don't let yourself get confused by the many deleting messages on install. The update script tries to erase:
- busybox (newest version gets installed afterwards)
- 4 different versions of app2sd scripts
- dalvikcache2cache script
- the 3 binaries included (e2fsck, tune2fs, mkfs.ext4)
- 3 possible symlinks for the binaries
- mtab file
Everything that is erased gets either installed afterwards (busybox, etc ...) or isn't needed (app2sd scripts).
Please post the alignment log if you testet this. This log can be found on the sdcard ( /sdcard/sd-ext-alignment-log.txt).
==================================================================================
changelog
0.4d test release
- If the partitions gets aligned it will be formated with ext3 now instead of ext4 so it works with ROMs without ext4 kernel support.
0.4c test release
-fixed a rare issue that could happen on alignment if a partition has set the bootflag.
v0.4b test release
- fixed and Oxygen 2.0 RC4 related issue:
- renamed the "99complete" to "991complete" to prevent similiar issues on other AOSP ROMs that use individual properties.
v0.4 test release
- dalvik cache is now left internal. This should spread i/o and thus speed things up a bit.
- change scheduler to "deadline" if the kernel supports it
- changed logging: One file (data2whateverlog.txt on sdcard) for alignement and fsck with more info (thx moebius83)
- In case there is a swap partition (mmcblck0p3) this will also get aligned.
v0.3 test release
- this version will now recreate your sd-ext partition if it is not aligned (format: ext4)
- fixed the mtab error that could cause issues in some cases
- added busybox v1.17.2 to assure compatibility.
- added support for swap partition (if kernel supports it and partition 3 exists)
- removing more stuff on install (to make sure there are no old symlinks)
0.2e
-fixed an issue caused by the s-off fix.
0.2d
-fixed the cm6 fix
v0.2c
-fixed a bug that made this only work with S-OFF. (i totally forgot that system can't be mounted rw as default )
v0.2b
- fixed a typo of the last fix . This could have caused issues on leedroid. (thanks woti)
- added the patch for CM6 (thanks iinga)
v0.2
- fixed a syntax error making the script not working at all
- fixed a bug that would have occured on leedroid if it would have worked ^^
------------------------------------------
data2whatever v0.1 (dec 23.)
-completly rewrote of the data2ext script
Confirmed to work with:
- LeeDroid 2.3b A2SD (life-on-the-edge may not work)
- MIUI 0.12.18 R3
- Gingerbread Oxygen RC2
- Ginger Villain ROM
- CM6
- MidianUI r2e
- Desire stock (with init.d support enabled through ramdisk - more info)
Don't work yet:
(about HD roms in general. They will be the ones with most issues because they use external space for system stuff because of the size of the HD Rom - ill still try to make my script work with them)
- robocik's Z v06
- ReflexTSenseHD 1.5
nice work man
im using miui currently and it hass 04apps2sd instead
is this the same thing?
Very nice work.... and it kinda confirmed what i've been thinking all the time about it. Ppl thinks it speeds up your phone! Still this is of very good use if u want alot of space for apps
Rastaman-FB said:
nice work man
im using miui currently and it hass 04apps2sd instead
is this the same thing?
Click to expand...
Click to collapse
Check my 2nd post. I just edited it.
I love you.
But still the best way is to integrate it w/ ROM
where is the download link
ghmail2 said:
where is the download link
Click to expand...
Click to collapse
This
10char
Rafa91 said:
This
10char
Click to expand...
Click to collapse
a joke?
ghmail2 said:
where is the download link
Click to expand...
Click to collapse
+1
10char
Go here ->http://forum.xda-developers.com/showpost.php?p=9697369&postcount=7229
but i don't know if it's RCMixHD specific.
+1
Is it a joke or not?
ghmail2 said:
where is the download link
Click to expand...
Click to collapse
D'oh .... sry ... when i finished the post i went eating ... i had the fealing i should have checked it again
just wait omg ...
anko184 said:
Go here ->http://forum.xda-developers.com/showpost.php?p=9697369&postcount=7229
but i don't know if it's RCMixHD specific.
Click to expand...
Click to collapse
This one also works. All 3 Roms i posted use the same script
So generally, it should work on any rom with CM6/AOSP based A2SD script? Mkay...
ghmail2 said:
a joke?
Click to expand...
Click to collapse
It wasn't there before xD
Didn't get to experimenting with btrfs today, will test it tomorrow
Sent from my HTC Desire using XDA App
@melethron great work man, but I will remain to my opinion that data2sd(ext) is bad for so many reasons. But it is good to have choices.
But nevertheless your work is apreciated
Hi, having small issue here, trying to install this on the baadnwz rc2 hd rom, following all the steps, when i finally restart and everything boots up as it should, it freezes on the white htc screen before it asks you to select your network provider and force closes.
Anyone have a solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Youtube video of broodROM RC4
- Features for broodROM RC5 -
You can find a download link on the 2nd post
- I9001XXKQB (KPL) (Android 2.3.6)
-- 1 Odin package with recovery hang fix included
-- Rooted
-- Deodexed
- FeaMod Recovery v1.4 Fixed (based on CWM Recovery v5.5.0.4)
-- The fixed one, no hangs in recovery or bootloops
- Skyhigh Kernel v1.4d OC/UV
-- Thunderbolt Integrated
-- Set to 1.4GHz using Virtuous OC Daemon
- Script: /system/etc/init.d/01broodrom
-- Choose a CPU Profile or set a manual CPU configuration
* Battery Saving Profile / Balanced Profile / Performance Profile
-- Set I/O Scheduler
-- Set SDcard Read_ahead
-- Set Dalvik Heapsize
-- Enable/Disable Media Scanning
-- Enable/Disable Bootanimations
-- Enable/Disable Special Bootanimation
* Enable DMESG Unix output / LOGCAT as bootanimation or use the original (AOSP) library
-- Enable/Disable Google Error Reporting
-- Enable/Disable Battery Tweak (dirty * centisecs)
-- Change LCD Density (May cause market/app errors)
- Scripts: /system/etc/broodrom_scripts
-- auto_calibrate_battery
-- defragment_databases
-- factory_reset
-- fix_permissions
-- hard_reset
-- wipe_dalvik
-- zipalign_apps
- WiFi Tweak:
-- Connection stability tweak (WiFi connections with poor signals are better supported)
- WiFi Fixes (when you still have crappy WiFi)
-- Additional WiFi packages: KQ1 Modem / KQ1 WiFi Binaries
-- Additional App: FXR WiFi fix and rescue (last resort app, only use if the rest doesn't work)
- ICS Theme v4.0.1 by Reneph/RavoxX including:
-- Extended Power Menu with Screenshot function
-- Modded KQB Lockscreen (changed default wallpaper, no swipe to unlock message)
-- Lock animation: Shutdown-style Old TV
-- Smooth Spinners
-- SMS/MMS Mod
-- Camera Hack
-- "ICS Layout" Settings menu
-- ICS Grey Keyboard (by fadzlihellmuth)
- Additional ICS Theme Tweaks:
---- SystemUI.apk
-- Swipe to Remove Notification
-- Extended Status Bar 13 Buttons
-- Removed Battery Charged Notification
-- Custom Label in Statusbar (can be changed with nifty little app)
---- framework.jar
-- Disabled ScrollingCache (Smoother Scrolling)
-- Swipe to Remove Notification
---- framework-res.apk
-- Added more Auto-Brightness levels for more efficient brightness
-- Changed Default Wallpaper (also lockscreen one)
- Two Launchers:
- Go Launcher EX 2.86 with ICS Theme of kovdev
- Touchwiz 4
- Custom Boot Animation support, ICS boot animation (sanim.zip)
- No Adds (hosts file) (upd. 22 April)
- Default i9001 boot sound but 50% less volume
- Samsung Galaxy W GT-I8150 GPU Drivers
- Cyanogenmod APN List (All providers)
- Serious GPS Tweak (improves GPS allot)
- Beats Audio Lite
- Busybox
- Default Removed Bloatware:
-- Aldiko
-- Allshare
-- Beach
-- Buddies Now
-- Days
-- Dual Clock
-- Genie Widget
-- HRS Hotels
-- Info Alarm
-- Kies Air
-- Layar
-- Mini Diary
-- Music Hub
-- Press Reader
-- Pro Tips
-- Samsung Apps:
--- Widget Clock
--- Program Monitor
--- Stock Clock
-- Samsung Service App
-- Talk
-- Talkback
-- Thinkdroid
-- Unified Inbox
-- Write and Go
- Updated all stock apps to latest version excluding
-- Replaced TouchWiz Calculator with a more expanded one
-- Google Play is not updated because it caused errors in RC4, let it auto update
- Build.prop tweaks:
-- 3G Tweaks
-- No black screen when calling bug
-- No call out delay
-- Power saving tweaks
-- Better responsiveness
-- Set default screen brightness
-- New Dalvik flags
-- Better Reception
-- Quickboot
- Installation for broodROM RC5 -
1. If you have CWM installed: format all partitions. If you don't have CWM installed do a Hard Reset (*2767*3855#) Note: A hard reset also wipes your sdcard, make sure you got it backed up
Note: A format or hard reset is not always needed, you can always try to keep your data folder and flash broodROM RC5, wiping dalvik cache is still needed!
2. Put your phone in download mode (when off hold: vol -, home, power)
3. Start Odin, Choose AriesVE.ops file, check "One Package", choose: "broodROMRC5.tar.md5" > Click Start
4. Wait till the process is complete, now your phone will reboot and show you recovery mode, now choose reboot system now by pressing the menu button
5. Set animations to a few. (settings > display > animations) For the shutdown-style old TV animation and start enjoying your new rom
DISCLAIMER : FLASH AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE
Donations
If you really like the broodROM and/or Galaxy S Plus Configurator development you can consider donating me.
I really appreciate the donations, and I really want to thank the people who donate me
All donators will have instant access to all pre-releases and private beta's
Many thanks to the following people who donated me!
Leeon Wong Wong - €10,-
KoekwousNL - €5,-
t_raven - $10,-
dagothe9 - $5,-
J.A.T. Pajuelo - $5,-
L Sangiovanni - $10,-
S Petropoulos - $5,-
Dan - $20,-
tormentured - $7,-
cyclistefou - $10,-
geo_xar - $14,-
ManEater - $5,-
1009i - $5,-
J. Scharf-Brueck - $5,-
F.Hecker - $5,-
J.Sikken - €25, -
Latest version: RC5
Download: here (odin)
Download: here (cwm backup)
Download: here (additional tools and fixes)
Addons
WiFi Patch (KQE Binaries):
http://www66.zippyshare.com/v/35023232/file.html
Arabic Patch (beta)
http://www8.zippyshare.com/v/84760912/file.html
Revision 2 (beta)
http://www64.zippyshare.com/v/32115967/file.html
- Download page with all versions (sourceforge) -
https://sourceforge.net/projects/broodrom/files/
- Download page with all versions (importanic.ch thanks to Fr0zen1977!) -
http://broodrom.importanic.ch/
- Download page with all versions (mooo.com thanks to loonyhack!) -
http://broodrom.mooo.com/
broodROM RC4 FAQ
Q: I kinda like Apple, and I don't want an android pissing on an apple as bootlogo
A: Well.. this is only a custom boot logo, you can easily change it by reflashing the SkyHigh v1.4 Kernel
Q: I want to install a system accelerator like Thunderbolt or Adrenaline shot
A: Don't do that! The SkyHigh v1.4 kernel already includes an integrated Thunderbolt, adding more tweaks would simply bootloop your phone
Q: I saw the screenstate_scaling script in /system/etc/init.d, what's up with that?
A: screenstate_scaling is an addition to Thunderbolt, in this script the default awake & sleep governors are set, this script can function as an alternative to CPU Master. You will notice that CPU Master will give you a warning each time you boot your phone since the screenstate_scaling script will interfere with it.
Q: I noticed that you have set the sleep governor to ondemand, why is that?
A: I did that because I've experienced some alarm clock fails on 100Mhz, Of course you can try it out yourself, it might work just fine
Q: I want a better battery life for your rom! How can I achieve that?
A: You can perform the following steps to gain a better battery life: first thing is to lower the CPU Frequency, the default is 1.8GHz, but you can set it to 1.4Ghz (or so) with Antutu CPU Master. The second thing is that you can set the sleep governor to "powersafe" (can be found in screenstate_scaling script) this sets the phone in an even lower state and safes you battery (see the question above for the possible risks)
Q: I want to change my kernel, how do i do that?
A: I recommend you to not change your kernel since Skyhigh gives the best performance for broodROM RC4. Although you can download an alternative kernel and place it on your /sdcard, then reboot in recovery using the extended power menu and choose install zip from sdcard > install zip from internal sdcard > choose the zip file > install > reboot.
Q: My browser FC's all the time, how do I fix this?
A: Some people experience browser FC's, you can easily solve this by installing the broodROM_RC4_InetFixes.zip in recovery mode, don't forget to mount /system to be sure it installs correctly.
Q: My WiFi has constant drops, how do I solve this problem?
A: The first thing that you need to investigate is your "DHCP Lease Time" you can find this option in your router, if it's set to a low number please change it (mine is 604800). If this doesn't solve the problem you can try installing the KQ1 Modem using Odin (select AriesVE.ops from broodrom rc4 and choose the .md5 file as "Phone" package) and install the KQ1 Wifi Binaries using Recovery mode (also don't forget to mount /system) If you still encounter WiFi problems you will have to wait until the ICS Value pack release so i can permantely fix it.
Q: I saw the "Module Loader" app. what is this? and what can it do for me?
A: The module loader app is an app that allows you to run additional modules for your i9001. You can load several modules, I added the tun.ko module which is OpenVPN, the cifs.ko module which is Samba Shares Support (smb://) and the PPP Modules. If you are sure you will never use any of those you can delete the app by deleting "moduleloader.apk" file in /system/app
Q: I noticed that there are some bugs regarding the ICS Theme, some apps have gingerbread looks
A: You can solve this problem by downloading the newest ICS Theme and extract "framework-res.apk" and "twframework-res.apk" from the archive, then copy them from your sdcard to /system/framework and overwrite the current files, set the permissions to RW-R-R and reboot.
Q: I want to change the bootanimation, how can I do that?
A: I've chosen to keep the sanim.zip layout instead of bootanimation.zip which is default for SkyHigh v1.4. So you can place your bootanimation (named sanim.zip) in /system/media, set permissions to RW-R-R and reboot
Q: Is your Configurator BETA 4 compatible with broodROM RC4?
A: Yes and no, you cannot flash themes or mods, but you can use things such as changing boot animation, changing dns, updating hosts and so on (all things that include theme files are not compatible with broodROM RC4)
Q: I cannot buy apps from the store. how can i solve this?
A: Wipe the play store cache by going to settings > Applications > Manage apps > All > Play store > clear cache (thanks to nail16)
If this doesn't work, download an older version of the market here and delete /system/app/Google_Play_3.5.1.5.apk then place the market apk in /system/app and reboot (set permissions to RW-R-R) The market will now automatically update to the latest version.
Q: I cannot change the background of my lockscreen, why is that? I want to change it!
A: The lockscreen from KQ7 is a beta and does not support custom wallpapers yet. Although you can change the lockscreen by looking in the framework-res.apk file with Winrar, look for "framework-res.apk\res\drawable-hdpi" then you will find the "zzzzzzzz_default_lockscreenw.jpg" file at the bottom, You can replace that file by dragging your custom 480x800 lockscreen in there. set the compression level to "store" and put the framework-res.apk file on your /sdcard, copy it to /system/framework and overwrite the file. Don't forget to set the permissions to RW-R-R
(this also seems to work on the default way of changing the lockscreen background )
Q: I get random reboots, help?
A: Because all i9001 devices are not actually exactly the same, some devices could cause errors when using a support OC/UV kernels, you can flash the SkyHigh v1.3 kernel or Feacore 1.4 NonOC to prevent this problem.
Q: I have sdcard fails, how can I solve this?
A: the developer of the SkyHigh kernel is currently working on a fix, you can read about it here
Q: Where can I get additional information about the kernel?
A: You can find it in the SkyHigh Kernel Thread
Last update: 31-03-2012
More to come!
- RC5 Screenshots - (new)
Thanks to Coertmans for uploading the screenshots
thank you so much dude!! i was just about to flash the ori xxkps rom. u rocks!!
List of fixes for RC5 that will be included in Revision 2 patch:
USB Settings force close
Ram consumption (probably dalvik flags)
Fixes for 01broodrom
Fixes for broodrom_scripts scripts
Swipe error (not sure about this one, only 1 person reported it)
More? Please let me know
List of features that will be added to Revision 2 patch
Very extended guide on how to use/configurate broodROM RC5 Revision 2
New ICS Style status bar
Toggle 2G mod
broodplank1337 said:
For the people who want a clean and fast ROM without crap!
This ROM allows all kinds of customization.
When this ROM is installed it will look like a clean install of a stock ROM.
But will include these features:
- I9001XXKPS (Android 2.3.6)
- CWM Recovery v5.0.2.7. based FeaMod Recovery v.1.3 without OC/UV
- Rooted
- Deodexed
- Zipaligned
- Custom Boot Animation support (sanim.zip)
- Extended Power Menu
- AOSP Lockscreen
- Custom Battery Icon
- Lock animation: Shutdown-style Old TV
- Adrenaline Shot 13
- Samsung Galaxy W GT-I8150 GPU Drivers
- Removed Apps:
* Aldiko
* AllShare
* Beach
* Budies Now
* Days Widget
* Dual Clock Widget
* Genie Widget
* Info Alarm
* Kies Air
* Layar
* Mini Diary
* Music Hub
* Press Reader
* Pro Tips
* Samsung Apps:
- Calendar Clock Widget
- Program Monitor Widget
- Stock Clock Widget
* Sim Toolkit
* Talk
* Talk Back
* Think Droid
* Unified Inbox
* Write and Go
- Extra Apps:
* Superuser
Installation Instructions:
1. Open Odin and click "OPS", now choose the AriesVE.ops file.
2 Check "One Package" and select the "XXKPS_Performance_EditionRC1.tar.md5" file as the one package file
3. Click Start and wait until the process is done.. (may take 7 to 25 min)
4. Once your in CWM choose Reboot
5. The first start might take a while... Enjoy XXKPS Performance Edition RC1
Don't forget to set animations to a few for the shutdown-style old TV animation
Note: For some reason I couldn't add custom apps to the ROM without gettings FC's so I decided to leave them out.
Download the following apps after flashing the ROM:
* Root Explorer
* Terminal Emulator
* Adfree Android
Click to expand...
Click to collapse
is it greek language support with sms writing?
thanksssss
mikrokatevas said:
is it greek language support with sms writing?
thanksssss
Click to expand...
Click to collapse
yep its supported
I test it now !
cool dude!
cud u make an odin flashable for cranium rc5?
sakindia123 said:
cool dude!
cud u make an odin flashable for cranium rc5?
Click to expand...
Click to collapse
I could if it was working on my phone, I've tried installing it over 10 times but still get black screen unfortunately
broodplank1337 said:
I could if it was working on my phone, I've tried installing it over 10 times but still get black screen unfortunately
Click to expand...
Click to collapse
thanks very much....
have anyone try it ?
give us your opinions.....
thanks again
I have a problem after flash in download mode. "Installation aborted".
Alex93917 said:
I have a problem after flash in download mode. "Installation aborted".
Click to expand...
Click to collapse
did you make factory reset afterwards?
what is Terminal Emulator? is it a must to install?
broodplank1337 said:
I could if it was working on my phone, I've tried installing it over 10 times but still get black screen unfortunately
Click to expand...
Click to collapse
crap...........cud u give some instructions to how-to?i will pm it to someone wjo installed cranium rom
mikrokatevas said:
thanks very much....
have anyone try it ?
give us your opinions.....
thanks again
Click to expand...
Click to collapse
Im not talking about my ROM but about Cranium RC5, my ROM should work just fine.. tested it myself
sakindia123 said:
crap...........cud u give some instructions to how-to?i will pm it to someone wjo installed cranium rom
Click to expand...
Click to collapse
I will PM u instructions
mikrokatevas said:
did you make factory reset afterwards?
Click to expand...
Click to collapse
Yes. But, now, it's working ! Good work !!! Thank you.
Sent from my GT-I9001 using Tapatalk
Alex93917 said:
I have a problem after flash in download mode. "Installation aborted".
Click to expand...
Click to collapse
When u just reboot it's gone
Anyone tested this ROM in AnTuTu?
I will take a test in ten minutes.
---------- Post added at 01:43 PM ---------- Previous post was at 01:26 PM ----------
So, this is a Antutu Test report.
Uploaded with ImageShack.us
Scv7 - ICSupercharged
**WARNING** THIS IS ONLY FOR USERS ALREADY ON THE ICS LEAK,NOT FOR THOSE ON 2.3.6.****
CHANGELOG
UPDATE 9/26/12/
- Leak #2 SCV7 Fixes -
- fixed SU
- Fixed numerous oddities
*MMS resize and Init.d still not working*
Download and Flash in Bootmenu (First or second system)
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/scv72ndleak092112.zip
**FOR HOW-TO overclock, scroll down to main leak 2 download**
UPDATE 9/11/12/
- Leak #2 SCV7 Fixes -
- Fixed Init.d Support (overclock addon zips and Init.d scripts implemented should work now)
- Added Whirleyes bootmenu to /data/app
- Added SuperSU to data/app
- Root should be fixed
- Added back AccuWeather widget from Leak #1
- Removed blur services
download HERE or below in downloads section
*IF YOU INSTALLED SCV7 LEAK 2 ORIGINAL ZIP FROM 9/11/12 ,JUST FLASH THIS OVER , NO NEED TO WIPE DATA, JUST WIPE CACHE AND DALVIK CACHE*
UPDATE 9/11/12/
- Cooked Scv7 into Our Second ICS Leak
- Widgets Accessible from Home Screen
- All Updates Applied
- All Tweaks Applied
*For OC just use same files as before*
Download HERE or belore in Downloads
this is a FLASHABLE ZIP. NOT a RESTORE
UPDATE 9/1/12/
Merged Rom with Updates 1&2,Speedboost,and Spareparts addons.
Download Located below where the main rom download link is (i replaced the link)
Update 2 Fixed -
- Fixed Gallery FC
- Changed back some framework (no droid loader circle,stock loader)
- Fixed Toggle Icons (wifi-ing, sound)
- Fixed link in settings to holo launcher settings
- Added back stock Gallery for camera link
Download Here or scroll to Update/addons section
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/scv7up2fixed.zip
UPDATE 8/20/12/
Update 2 -
- Theme Updated
- Dialer
- Framework
- Phone
- Settings Icon
- New Toggles
Themed the rom more,updated some things i didnt like like the toggles before using various elements of cm9 themes (ice9,MixerICS,and Matted Blues)
Fash in bootmenu after wipe cace
Download - Fixed Above ^ [/URL]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE 8/13/12/
ADDONS -
- Speedup UI script implemented -
- writes more pages to disc, when given oppurtunity
- drop all cahces when given oppurtunity
- Keeps 4MB in memory
- Dumps Vfs cache less
- How much dirty data there must be to write to disc
- How often writeback daemons wakeup to write data to disc.
- How old 'dirty" data has to be to be written to disc
- Faster sdcard read speed
- file system speedups
- sets cpu governor to hotplug, is most intelligent
- decreases sampling rate, stops lag and saves battery
- sets I/O scheduler to SIO, considered best
- Sets read and write on I/O sceduler to max.
- will merge tasks if able
- doesn't verify bus info, faster I/O
- better memory mangement
- OOM fixes , shoould see awesome increase in multitasking
- Enabled ZRAM compressed memory
.
DOWNLOAD LOCATED IN ADDONS SECTION
UPDATE 8/10/12/
Update ADDON - Stock Moto Messaging App - Modded Black w/white&blue text
- linked Lockscreen to Stock Messaging
*AOSP MMS rarely sends Images fine,so this is its replacement.*
Download located below in ADDONS section
UPDATE 8/9/12/
Update APP - - Spare Parts
updated to Plus Version, the one i had was old with function that did not work (like OC etc)
download it HERE and flash in BOOTMENU, wipe cache only
UPDATE 8/9/12/
- Added back Google Music
- Fixed Permission Issues
- Changed Wallpaper on boot animation and in UI
- Tweaked some files
- lightened the system more
- default is 1125 overclock with hotplugx
- default is aodp lockscreen with 4 hotseats
UPDATE 8/6/12/
Rom Update 1 -
- Blacked out the Keyboard (white on black instead of white on gray)
- Cm9 Music App (replaces google music)
- Extended Settings in Settings.
- GPS Hack for faster Lock On
- Logger Disabled for smoother performance
- Latest Email Inverted (corporate sync should work fine,let me know) credit: galamdring
- Holo HD Launcher
- HOST file (blocks ads)
- Better Zip align on boot script
- Inverted Google Play 3.15.17 (latest) also replaced icon & renamed to Market ..i was feeling Nostalgic
- Spare Parts App
- More Build Prop Tweaks for better Performance
UPDATE 8/5/2012
ADDONS -
- Added 1200MHz & 1125Mhz on boot Init.d CPU Overclock w/modules
UPDATE 8/3/2012
ADDONS -
- Added AOSP Multiwave Lockscreen w/4 hotseats
UPDATE 8/1/2012
ADDONS -
- Added AOSP Multiwave Lockscreen (removed rotate)
- Added links for HD Widget installation,corrected for users it wasnt working for
UPDATE 7/30/2012
- Added back BlurCamera for full 8mp images, kept ics one too,ics camera set to default when hitting hardkey for camera.
- Scrollable Notification Toggles (8 total, not customizable)
- Removed Facebook,added back stock one
- Removed moto launcher completely, replaced with AOSP 4.0.4 Launcher
- Removed Rotation in Lockscreen.
- Reboot Options in Power Menu (after hitting power off)
***NOTE** i will be creating some flashable ADDONS for HD launcher today,working on them now. so u cna have the option to use the HD launcher and widgets***
What's new in V7?
- Supercharged RC 10 - 1000HP
- Rooted
- Init.d Support (credit to Jimbridgman and Lukensteinz for there help with this)
- Fix Permissions On Boot
- Battery Calibration on boot
- Zipaligned on Boot (/system/app and /data/app)
- Deodexed
- Zip Aligned Apps
- Jelly Bean 4.1 Framework Animations
- Removed stock unlock icon,replaced with AOSP
- Volume+ Hack (Ups volume 7 notches higher)
- Inverted Google Play
- Inverted Google Music
- AOSP Calculator
- AOSP Camera
- AOSP MMS
- AOSP 3D Gallery
- AOSP Calender
- AOSP Contact Pictures
- Inverted Youtube
- Inverted GMAIL
- Inverted Google Talk
- Inverted Google Voice
- Inverted Email
- Inverted Google+
- 1% Battery Mod (credit to alteredlikeness)
- DSPManager
- Net speed tweaks
- resolv.conf (google DNS servers)
- egl.cfg (Disables the Software Graphic driver and Software Rendering)
- Hosts File (Hosts file makes your Phone AD Free)
- Disabled google reports
- smoother scrolling
- Enabled GPU rendering
- Disabled Google OTA check-in
- Custom HD Boot Animation
- 180 degrees screen rotate
- lockscreen in landscape enabled
- Menu button to unlock
- Blacker UI
- Scrollable Notification Toggles (credit to cogeary and alteredlikeness for this mod)
UPDATES 8/9/12
- Added back Google Music
- Fixed Permission Issues
- Changed Wallpaper on boot animation and in UI
- Tweaked some files
- lightened the system more
- default is aodp lockscreen with 4 hotseats
How to Install:
1. Download ZIP
2. Extract ZIP into clockworkmod/backup of SDcard
3. Reboot into BOOTMENU...NOT clockwordmodrecovery
4. WIPE DATA/FACTORY RESET
5. Restore Rom
6. Reboot (first boot takes a minute as cache is built so don't freak out,just enjoy the pretty boot animation)
I AM NOT RESPONSIBLE FOR YOUR PHONE,SO FOLLOW DIRECTIONS.
Download Links:
FLASH LEAK #2 in Bootmenu as either first OR second system
INSTRUCTIONS FOR Leak #2 Based
1.Download ZIP
2.Place on SDCARD
3.Reboot into Bootmenu
4.Wipe Data/Factory reset
5.Wipe Dalvik Cache
6.Select "Install Zip from SDcard
7.Select "scv7leak2-fixed.zip"
8.Reboot
SCV7 ICS Leak #2 Based (August 31st 2012 ICS) *Updated 9/26/12 w/SU fixed*
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/scv72ndleak092112.zip
HOW-TO OVERCLOCK on Leak #2 SCv7
First FLASH OC Addon ZIP in bootmenu
Open Terminal Emulator (download it from market/google play)
type the following
su then hit enter
Now to Load the Modules type these One line at a time
insmod /system/lib/modules/symsearch.ko
insmod /system/lib/modules/cpufreq_hotplugX.ko
insmod /system/lib/modules/cpu_control.ko
Now to the overclock..
echo 3 1200 1398 > /proc/cpu_control/tweak_cpu hit enter
^ for 1200 Overclock
echo 3 1125 1398 > /proc/cpu_control/tweak_cpu hit enter
^ for 1125Mhz Overclock
echo hotplugx > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor hit enter
Done
**NOTE: This will not stick through reboot,in order to get this to stick on boot you would need Smanager from market, its free. Download it ,create a new document on in system/data folder and paste the lines that you are typing above into a blank document,save it,rename it to overclock.sh. open smanager and hit "Browse as Root"and then locate that file, click on it,then hit the Skull and crossbones (SU) ,and then hit the crank (BOOT) then hit save and exit.***
----------------------------------------------------------------------
RESTORE LEAK #1 in Bootmenu as first system
SCV7 ICS Leak #1 Based (July 6th 2012 ICS)
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/SCV7.zip
NOTE: do NOT update su binary. The SU is specific for 100% supercharge. If you change them it will break the supercharge script.also do not replace the services.jar with any mods that may come.unless its noted in mod thread that it is patched for supercharge.
---------------------------------------------------------------------------------------------------------------------
ROM UPDATE ZIPS:
Update 2
(Merged with main Rom download on 9/1/2012)
Update 2 -
- Theme Updated
- Dialer
- Framework
- Phone
- Settings Icon
- New Toggles
- Fixed holo launcher link in settings
- Added back Stock Gallery for camera link
INSTRUCTIONS:
1. Download Scv7up2fixed.zip
2. Place On SD Card
3. Reboot into Bootmenu
4. Wipe Cache Partition
5. Wipe Dalvik Cache
6. Select Install Zip
7. Install
6. Reboot.
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/scv7up2fixed.zip
Update 1
(Merged with main Rom download on 9/1/2012)
Whats In It?:
- Blacked out the Keyboard (white on black instead of white on gray)
- Cm9 Music App (replaces google music)
- Extended Settings in Settings.
- GPS Hack for faster Lock On
- Logger Disabled for smoother performance
- Latest Email Inverted (corporate sync should work fine,let me know) credit: galamdring
- Holo HD Launcher
- HOST file (blocks ads)
- Better Zip align on boot script
- Inverted Google Play 3.15.17 (latest) also replaced icon & renamed to Market ..i was feeling Nostalgic
- Spare Parts App
- More Build Prop Tweaks for better Performance
DOWNLOAD: ADDED TO ORIGINAL ROM ^ ^ ^ ^
INSTRUCTIONS:
1. Download Scv7update1.zip
2. Place On SD Card
3. Reboot into Bootmenu
4. Wipe Cache Partition
5. Wipe Dalvik Cache
6. Select Install Zip
7. Install
6. Reboot.
--------------------------------------------------------------------------------------------------------------------------------------------
ADDONS/FIXES:
Speed it Up script by Leviathan26
(Merged with main Rom download on 9/1/2012)
- Speedup UI script implemented -
- writes more pages to disc, when given oppurtunity
- drop all cahces when given oppurtunity
- Keeps 4MB in memory
- Dumps Vfs cache less
- How much dirty data there must be to write to disc
- How often writeback daemons wakeup to write data to disc.
- How old 'dirty" data has to be to be written to disc
- Faster sdcard read speed
- file system speedups
- sets cpu governor to hotplug, is most intelligent
- decreases sampling rate, stops lag and saves battery
- sets I/O scheduler to SIO, considered best
- Sets read and write on I/O sceduler to max.
- will merge tasks if able
- doesn't verify bus info, faster I/O
- better memory mangement
- OOM fixes , shoould see awesome increase in multitasking
- Enabled ZRAM compressed memory.
ORIGINAL SOURCE:http://forum.xda-developers.com/showthread.php?t=1723259
credit to Leviathan26 for this script , and jimbridgman with help fixing it up for the a2
FLASH in recovery after WIPING CACHE AND DALVIK
**If you want Overclock, flash it after flashing this, as this re-arranges/cleans up the Init.d folder and scripts**
-----------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------
Extra modules pack v0.1.3 (feat. overclock module) compatible w/ Leak #1 or Leak #2
What is this? : this is to achieve overclock, this is done by using Whirleyes overclock module + governers for the droid razr. I altered it a little bit to work for the atrix 2 as we have 3 set clocks and razr has 4.I then Baked up an Init.d script so it runs on boot instead of the current method of terminal emulator commands, end resault ..noob proof Also this includes some governors for different preferences,to read what each does go HERE and for pegasusq go HERE . included down below are two overclock flashable zips. The first is to overclock to 1125Mhz with GPU overclocked at 398Mhz. The second is for 1200Mhz overclock and GPU overclocked to 398Mhz. I included both because some Atrix 2's can handle 1200mhz (like mine) but for some it will bootloop the phone. so if it does,restore your rom and stick with 1125Mhz.
Included Governors -
boostedASSv2
pegasusq
smartassv2
hotplugx
interactivex
**By Default i have Governer set to Hotplugx. If you want to change the governer, install Antutu Cpu Master Free off of google play. from there you can set on boot whicever governer you prefer. Enjoy! **
Downloads:
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/scv7oc1125.zip
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/rdavisct/SCV7/scv7oc1200.zip
** you have to wait about 45 - 60 seconds after boot before the settings show up**
INSTRUCTIONS:
1. Download zip
2. Place On SD Card
3. Reboot into Bootmenu
4. Select Install Zip
5. Install
6.Reboot.
Credit: Thank Whirleyes for this awesome hack.
-------------------------------------------------------------------------------------------------------------------------------------------------
SCREENSHOTS
Credits: Jimbridgman , Cogeary, Alteredlikeness, lukensteinz, whirleyes, lkranser ...all my fellow developers who have contributed to this effort. they have all helped me in creating this rom,with advice,suggestions,and valuable input. their continuous self-less contribuations here on XDA should not go unrecognized.
Scv6
What's new in V6?
- Updated Supercharged script to RC 8.2
- Milestone Overclock (two versions - 1200Mhz/1125Mhz)
- Inverted Settings (white on black bg)
- Inverted Framework w/blue clock text
- Zip align script on boot
- speedy v7 script
- Net speed tweaks
- Logger removed
- Cache cleaner on boot
- Edt Tweaks
- Android 4.0 System server
- Smoother scrolling tweak
- spare parts
- custom Signal Icon
- custom 4g data icon
- Inverted Keyboard (white text on black bg)
- Custom Boot Animation
How to Install:
1. Download ZIP
2. Place ZIP on root of SDcard
3. Reboot into CWM Recovery
4. WIPE DATA/FACTORY RESET
5. Flash ZIP
6. Reboot (first boot takes a minute as cache is built so dont freak out)
*note: i would not recommend restoring any apps with data,otherwise you may face issues. Restoring just the APPS is fine,leave the data out of it*
Download Links:
**RE-UPLOADED 6/9/2012**
Issues addressed and Fixed
Supercharged v6 w/oc to 1125
mirror 1125
Supercharged v6 w/oc to 1200 - for phones that can handle 1200mhz without bootloop
mirror 1200
FLASH IN CWM RECOVERY,NOT RESTORE
SCREENSHOTS
CREDITS: lfaber06 - original creator of the Supercharged V6 Rom for the Atrix 2
JRW 28 - Current Half creator/half owner of Supercharged v6 rom, without him,scv6 wouldnt be half as good as it is (witty,yes i know)
——-------—------—------—------—-----—-----—--
What do we have here?
-Supercharged script's
-SuperClean script's
-Deblur
-Deodex
-Oc Under terminal emulator (built in in V4 and above see second post)
-Build.Prop tweaks (a lot of 'em)
-Sdcard speed tweaks
-1 percent battery mod
-No carrier logo
-Quick Settings
-Webtop over hdmi
*********-How to Install...**********
------------------This only applies to v1-4, For V5 and above follow instructions listed next to downloads below---------------
-Boot into**BOOTSTRAP**(NO SAFESTRAP)
-Format System
-Install Stock Deodex rom
-Wipe Data/Factory Reset
-Wipe Cache
-Wipe Dalvik Cache
-Reboot phone
-Once stock rom has loaded install bootstrap and reboot into recovery(we need a clean, deodxed, rooted base)
-Wipe Data/Factory Reset
-Wipe Dalvik Cache
-Wipe Cache
-Install SuperCharged Rom
-*****DO NOT FORMAT/WIPE ANYTHING AFTER FLASHING****
-Now what???
-When prompted choose go launcher and set as default
*********Changelog*********
-V1.0
-Initial Release
-Known minior theming bugs.
-v2.0
-Fixed a few theme bugs(wipe data/factory reset)
-Fixed Contacts
-Edit's to updater script
-Added apps (including bloat freezer, I checked its cool)
-Move some apps to /data (so you can uninstall them)
-Added ics notification sounds
- Put back moto launcher (use home switcher)
-V3
-****HUGE Performance increase over V1 and V2****
-Fixed Super user issue's
-Fixed busy box issue
-Fixed webtop?
-Fixed permission issues with oc. Should no longer cause a reboot.
-V4
-Fixed webtop (I'm sure this time)
-OC'd to 1122 on boot
-Ad blocking in hosts file
-Wireless tether hack is now included (this damn thing..)
-Removed Motomizer (I could not seen any improvement over the included scripts)
-Removed Scripts app and BloatFreezer (both were causing push ad's)
-Removed Ciq Completely! (THANKS JIMBRIDGEMAN!)
-V5
-Based on 2.3.6 Update
-Added CapnPez's Toggles
-Better Init.d support (Now loaded from system/bin if install-recovery.sh fails)
-New boot animation
-More build.prop tweaks
-This is a fesh build of 2.3.6 from a system dump, it has been deodxed.-----------V5_Update_1
------------------Fixed haptic feedback matches 2.3.6
------------------Fixed Supercharger "V6" scripts THANK YOU ZEPPELINROX
------------------Build prop edits to wifi, vm, and 3g Thanks Tyler Carter
---------------------------V5_Update_2
-------------------------------------------Added reboot option and ICS animation. Thank you JRW28 and COGEARY
-------------------------------------------Added ICS Ui, Notification's, and Ringtones.
-------------------------------------------Added Voicesearch from market to system/app
-------------------------------------------Fixed gps fix issues that show up after a few days with rom
************A note on over clocking For SCV5 Only***************************
For best results this is how ya need to do it. (only if you are using the old method exp typing 1200 into terminal emulator)
-Do not over clock until your phone is fully loaded (feels like setup lag is gone)
-Use motor_hot_plug governor
-Set min and Max to 1000
-Reboot the phone
-Wait till the phone is fully booted (again feels like lag is gone)
-Now open terminal emulater and type "su"
-Now type "1100"
-Run at 1100 for a few mins put some stress on it at 1100
-Now go to terminal emulator and type "su"
-Now type "1200"
****I'm seeing much better results if I "break it in" the over clock as opposed to just jumping in at 1200****
Thanks to Rick#2 for this overclock method.
Original OC thread http://forum.xda-developers.com/showthread.php?t=1341514
************READ ME************
If you are running V4 you will need to delete the file OC3 in system/ect/init.d in order to use this overclock method, the default method in V4 is different then this one but they are both included. Please read the post linked below to learn how to set your own clock speed.
If you want to OC to say 1200 you would open terminal emulator type su, then echo 1200000000 > /proc/opptimizer
Another option is say you know your phone is stable at 1250 you could go to /system/etc/init.d open the file oc3 and change the values to 1250000000 and you would be at 1250 on every boot. DO NOT SET THIS TO A LEVEL YOUR PHONE IS NOT STABLE AT YOU WILL BOOT LOOP.
http://rootzwiki.com/topic/14511-opptimizer-project-omap4-overclocking-kernel-modulesofficial-thread/
Why distribute a rom as a backup?
It's just so much easier to maintain a rom like this, by just using the /system image for the restore we keep things small, simple, and updates can come much faster. We are also eliminating the possibility of a bootloop during flash to a new rom and we don't need a prep rom that causes gps issues! This will also mean the future updates in theory should never require you to format /data. That means we should not have to lose all our setting's in future editions of the supercharged roms!
____
-Beta;
It means the rom is a "WIP" Work In Progress, With enough of the features working to be a daily driver. In this stage the rom is not to be considered as a finished product or 100% stable. Expect bugs, (Report bugs!)
_____________
********Included in SCV5 update*****
-Like the lighter haptic feedback 2.3.6 has stock?? Me too... Here's how to get it back in SCV5.
1: Click here ----> http://depositfiles.com/files/fg1c2ro4e
2: From cmd or terminal type:
3: adb push framework-res.apk /sdcard/
4: adb shell
5: su
6: mount -o rw,remount /dev/null /system
7: cp /sdcard/framework-res.apk /system/framework/
8: reboot
9: All Done!
__________________
***********MD5**********
SuperCharged V5_Update_2 618A7E1EC527439459717391BDACEB07 *SuperCharged_V_5_Update_2_Do_Not_Flash.rar
SuperCharged V5 AC513654F485042DE5A3E3686031C1B4 *SuperCharged_V_5_DO_NOT_FLASH.rar
SuperCharged V4
SuperCharged V3 35BAE13E25D61A1E3531EECE446F3C2B *SuperCharged_Atrix_V3.zip
SuperCharged V2 CA30B7CDE32C633C8E74EC0005D3C700 *SuperCharged_Atrix_V2.zip
SuperCharged V1 257B237EB0566E679591FB1D493A8A3E *SuperCharged_Atrix.zip
Just Incase..
Dude, you are the s**t! Can't wait!
Sent from my MB865 using xda premium
Very cool. Tag team effort.. Should be a tasty baked treat!
Sent from my mind using XDA
Once again thanks for the awesome work and can not wait to try out scv6!!!!!
Can we get some sneak peeks of what SCV6 will look like? Maybe a small list of new features that will be included?
you guys better make scv6 great or I am gonna cry. JK, but I am still expecting something great as I loved scv5v and JRW28's lithium. willing to test anything you want me to, working or not at all. PM me if you need testing. I should be available all weekend.
I'm still rocking SCV5.2. It's works awesomely. I just have had great success with this rom. Hoping v6 is even better.
NAB4 said:
I'm still rocking SCV5.2. It's works awesomely. I just have had great success with this rom. Hoping v6 is even better.
Click to expand...
Click to collapse
QFT. Been on V5,2 since day one, excited for V6. Keep up the great work, guys!
can't wait for v6!!i'm rocking the scv5 now and im loving it..hope there will be upgrade from v5..goodluck and keep it up!
russian
rdavisct, can you integrate russian langpack patch to SCv6?
patch is there (thx hamster89): http://rusatrix2.googlecode.com/files/Atrix2RUDEODEX2.3.6_v2.5.update.zip
(CWM patch)
Light_Soul said:
rdavisct, can you integrate russian langpack patch to SCv6?
patch is there (thx hamster89): http://rusatrix2.googlecode.com/files/Atrix2RUDEODEX2.3.6_v2.5.update.zip
(CWM patch)
Click to expand...
Click to collapse
That might be very difficult... Are those the russian versions of the stock system apps and files in that zip package? What does it change? Language packs usually just affect the keyboard and dictionary (LatinIME.apk and a libjni_latinime.so file, i think)... or are you thinking to add a new /res/values-ru/strings.xml to each and every apk?? That's a big order my friend..
Probably the best you can hope for is the US version stock moto/gb keyboard in SCv6 (which is a damn fine keyboard, and supports русский язык - видишь? - it even has the russian dictionary built in).
Out of curiosity, what is your system version (settings> about phone)?
But, I will definitely be looking into that zip myself... Спасибо!
Sent from my mind using XDA
many of apk (strings.xml and some images for dialer and etc) is translated by russian team. All of there in this archive, but it consist stock deodex apks, not SC`s.
Light_Soul said:
many of apk (strings.xml and some images for dialer and etc) is translated by russian team. All of there in this archive, but it consist stock deodex apks, not SC`s.
Click to expand...
Click to collapse
Thanks for the update, but the zip you attached has doubles of the /res/ folder for every apk.. someone would have to pick apart every apk and copy the needed files.. it would be very cool to put multiple languages/locales in a custom rom (there are already many roms for other phones with multi-language support), but also a difficult task..
I might still look into it though... Thanks again for the info and the zip!
Sent from my mind using XDA
I'm running v5.2. If I install Ubuntu under webtop as per here by jimbridgman, will that get undone when I update to v6? I assume it will, although the file on the SD won't change, leaving only the parts that update the "internal" android files to be rerun.
ManOverbored said:
I'm running v5.2. If I install Ubuntu under webtop as per here by jimbridgman, will that get undone when I update to v6? I assume it will, although the file on the SD won't change, leaving only the parts that update the "internal" android files to be rerun.
Click to expand...
Click to collapse
So u asked and also answered your own question lol j/k ..yes it should still be there because the scv6 is going to be a flashable zip. No wiping
Sent from my MB865 using XDA
rdavisct said:
So u asked and also answered your own question lol j/k ..yes it should still be there because the scv6 is going to be a flashable zip. No wiping
Sent from my MB865 using XDA
Click to expand...
Click to collapse
Will the zip work from v5 or would I need to be on 5.2?
Jce9182 said:
Will the zip work from v5 or would I need to be on 5.2?
Click to expand...
Click to collapse
Won't matter..as scv6 is built from 5.2 so itll add the contents of update 1 & 2 regardless
Sent from my MB865 using XDA
rdavisct said:
Won't matter..as scv6 is built from 5.2 so itll add the contents of update 1 & 2 regardless
Sent from my MB865 using XDA
Click to expand...
Click to collapse
Good deal. I'm on blaze now that's why I asked. Guess ill flash scv5 then get it set up how I want it then back it up till scv6 is ready.
MOAR | fully recommended for legacy & old devices <3 | 11/1/15 | sched_tuner v1.0.8
this MOD is VERY COMPATIBLE with any other MODs.
have fun!
n00bs, READ OR GTFO!!
this is my final stance of trying to make a quality mod compared to other all-in-one package "MOD"z (basically just simple all-in-one tweakz and crap)
hope you appreciate my work. -hoholee12-
pretty much most of these mods here will be more compatible if your device is older, or has older(or outdated) Android versions!
i originally designed it for Galaxy S(yes, the 2010 phone xDDD) in mind....these engines dates back to 2012-2013 on theory & small implementation, now repackaged as full version for better use!
if you get the necessary api missing error message before the menu shows up, you should NOT use wakelock sheriff and scaudiofix. they are likely to glitch out and cause havok!!
you need a "properly" working busybox and BASH interpreter to run this MOD.
you can get BASH from here.
you can get busybox from here.
for whitelisting apps on wakelock sheriff & stuff about thread booster and how to apply it, please read the end of the manual on the 7th option. :3
TL;DR how to:
download the sched_tuner_updater.zip and flash it.
type in terminal:
Code:
su -c bash
sched_tuner
all done.
Click to expand...
Click to collapse
latest revision can be found here!: https://raw.githubusercontent.com/hoholee12/avcore/master/sched_tuner.sh
new update bypasses debugfs limitation. users can now use extra boot tweaks and engines without debugfs.NOTE: two 'not supported' lines will occasionally appear instead of lists.(its not a bug, it means your device dont support debugfs.)
screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy Note II running wakelock_sheriff, look how much this thing saves battery!!(it wasnt like this before)
My older Galaxy S(5 yrs old with almost degraded battery!) running wakelock_sheriff. before this, it would go off in 6 hours, now it stays almost at the same level while going for more than 13 hours!!
what does it do?
-scAudioFix: this is a new engine i have developed since v0.0.6(released as a working state on v0.0.7). it controls cpu clock speed to avoid throttling when mediaserver process bursts out for resources, therefore it has an effect of killing audio skipping, or audio stutters when playback.
do NOT get confused over its name, its more than just lagfixing audios. it also saves battery by monitoring mediaserver process in realtime!
-rtmixman: continuation of my older project that has been widely used and loved by android community.
it adjusts minfree values so that heap allocation will be faster and supposedly boost general performance.
mpengine entry was replaced by rtmixman in v0.0.9
-boot tweaks: literally boot tweaks. these are the tweaks that cannot be done after boot.(such as changing system_server priority)(i am the only one who discovered this exploit, yay me!)
you will have to make the script to run on boot in order to make boot tweaks work.
-wakelock sheriff: a relatively new engine, introduced in v1.0.0(at the time i wrote this)
when your device goes to sleep, this will detect any processes that are hogging up the cpu and end them silently. thus prolonging battery life.
it has similar mechanism as scAudioFix. its algorithm is much faster than scAudioFix.
even if the cycle is fast enough, cpu may wake up periodically from this engine too.
its recommended to set a longer sleep time(default: 1min)
-thread booster: continuation of my older project(thread priority booster beta: http://forum.xda-developers.com/showthread.php?t=2076101)
this will boost foreground applications to have more cpu resources than any other, resulting in smoother and less laggy performance!
Click to expand...
Click to collapse
Recommended for use with other disk I/O tweaks.(the only area this mod doesnt cover.....)
(new version)v0.0.3(and up) now installs extra bootup tweaks when set on boot.
boot time may increase(since it changes boot priorities on zygote process), but in exchange, smoothness scrolling speed will last much more.
Click to expand...
Click to collapse
v0.0.6 now has MPEngine13 built-in for better performance and stability!(removed in v0.0.9)
v0.0.7 now has scAudioFix built-in for better performance and stability!
v0.0.8 now fixes mpengine compatibility on ALL DEVICES!!
v0.0.9 now has rtmixman built-in for better performance and stability!
v0.0.9 update2 is completely bugfree!
v1.0.0 now has wakelock sheriff built-in for longer batterylife!
v1.0.2 fixes all the critical compatibility problems on newer Android systems!
v1.0.3 adds whitelist functionality on wakelock_sheriff!
v1.0.5 now has thread booster built-in for better performance!
how to install = guide on installing a mod installer
STEP1) download the attachment posted below-->sched_tuner.pdf
STEP2)remove the extension name(and you can change the file name to whatever you'd like)(mine's 'sched_tuner'.)
P.S. you can also change the file name itself to something YOU would like to name it with. e.g.) iloveyou.sh
STEP3)put it in /system/bin, /sbin or /system/xbin(any folder that contains posix applets) = recommended for speed
Or... you can rename it to 'sched_tuner.sh'(extension 'sh' means its an executable script) and install the script like this-->(open the terminal emulator first and then...)
Code:
$ bash sched_tuner.sh --install -s /system/xbin
found it!
please wait...
program file already exists. overwrite? (y/n) y
copying files...
================================================================================
install complete!
type 'sched_tuner' to run the program!
$
all done! now you can go to the 'how to use' section.
if you are too stupid to follow the instructions and would rather want to flash the zip instead, download sched_tuner_updater.zip and flash it.
Click to expand...
Click to collapse
NOTE: this will basically copy itself(the installer) to the directory where it should be installed.
how to use
(if you have done the "how to install" correctly,) open the terminal, and do this:
Code:
sched_tuner
you will be greeted with this:
Code:
scheduling features tuner v0.0.3
current scheduling features list:
GENTLE_FAIR_SLEEPERS [COLOR="Red"]is ON.[/COLOR]
START_DEBIT [COLOR="Red"]is ON.[/COLOR]
WAKEUP_PREEMPT [COLOR="Red"]is ON.[/COLOR]
AFFINE_WAKEUPS [COLOR="Red"]is ON.[/COLOR]
generally, [COLOR="Lime"]GREEN[/COLOR] is considered OK, while [COLOR="Red"]RED[/COLOR] is NOT OK.
-------------------------------------------------------------------------------
select an option:
1)disable everything(speedhack!)
2)set the tweak on boot(init with few extra tweaks)
3)backup list
4)restore list/uninstall
5)refresh list
6)exit
you want to test the performance improvement before installing it to your device?
then the first thing you would want to do is select 1st one: disable everything(speedhack!)
--> this is the fastest way to see the performance improvement on the fly!(also temporary.)
you should see:
Code:
scheduling features tuner v0.0.3
current scheduling features list:
GENTLE_FAIR_SLEEPERS [COLOR="lime"]is OFF.[/COLOR]
START_DEBIT [COLOR="lime"]is OFF.[/COLOR]
WAKEUP_PREEMPT [COLOR="lime"]is OFF.[/COLOR]
AFFINE_WAKEUPS [COLOR="lime"]is OFF.[/COLOR]
generally, [COLOR="Lime"]GREEN[/COLOR] is considered OK, while [COLOR="Red"]RED[/COLOR] is NOT OK.
-------------------------------------------------------------------------------
select an option:
1)disable everything(speedhack!)
2)set the tweak on boot(init with few extra tweaks)
3)backup list
4)restore list/uninstall
5)refresh list
6)exit
and then, if you want to install it for daily use, go ahead and press: '2)set the tweak on boot(init with few extra tweaks)'
you will have to reboot your device in order to see extra improvements after that.
after you reboot, you will see:
Code:
scheduling features tuner v0.0.3
current scheduling features list:
GENTLE_FAIR_SLEEPERS [COLOR="lime"]is OFF.[/COLOR]
START_DEBIT [COLOR="lime"]is OFF.[/COLOR]
WAKEUP_PREEMPT [COLOR="lime"]is OFF.[/COLOR]
AFFINE_WAKEUPS [COLOR="lime"]is OFF.[/COLOR]
[color="yellow"]looks like the mod is already installed.[/color]
-------------------------------------------------------------------------------
select an option:
1)disable everything(speedhack!)
2)set the tweak on boot(init with few extra tweaks)
3)backup list
4)restore list/uninstall
5)refresh list
6)exit
it means the setup was successful.
NOTE: more and more mods will be included on newer versions.
Click to expand...
Click to collapse
NOTE: -do NOT move or delete the installer when a mod was applied on boot. sched_tuner_task will fail to find the installer location and fall in endless loop, resulting in a battery drain.
-also remind that installing(or moving) the mod installer to any location inside system(or data) partition will speed up the modding process every boot.(if you had the installer located on sdcard while applying the mod on boot, the task will have to wait till the sdcard gets mounted on every boot.)
how to self-troubleshoot
if nothing shows up on terminal screen except things that looks like an error such as: "error code 1",
don't freak out and just do what i say:
Code:
sched_tuner --bbpass
if it still don't work, do:
Code:
sched_tuner --verbose
or do:
Code:
sched_tuner --verbose --bbpass
and post the output right here.
Click to expand...
Click to collapse
clicking thanks button and constructive feedback is appreciated!:good:
TIP: works great with http://forum.xda-developers.com/android/software-hacking/script-flag-tuner-1-0-t3039223
changelogs
-first release (v0.0.1)
-added init.rc support(v0.0.2)
-minor typos fixed
-new bootup tweaks and bugfixes added(v0.0.3)
-added debugfs mount point(hoping it works)
-added rootfs mount point
-revamped alot of code
-future-proof bugfixes(v0.0.4)
-more boot tweaks added(v0.0.5)
-mpengine added for performance(v0.0.6)
-scAudiofix added for single core devices(v0.0.7)
-API update #3
-scAudioFix updated!(v0.0.7 update1)
-cleaned alot of gibberish codes
-more bugfixes
-scAudioFix updated for less battery drain.
-API update #4
-API minor bugfix
-API update #5, #6
-very smart scAudioFix(v0.0.8 PREVIEW)
-API update #7(v0.0.8)
-tweaked Android startup(v0.0.8 update1)
-removed mpengine(v0.0.9)
-added rtmixman(v0.0.9)
- tweaked Android startup(v0.0.9 update1)
- tweaked rtmixman(v0.0.9 update1)
-rtmixman heapgrowthlimit support(v0.0.9 update2)
-few bugfixes
-wakelock sheriff added for battery life (v1.0.0)
-description update & potential bugfixes (v1.0.1)
-mostly critical bugfixes(v1.0.2)
-API update #8(v1.0.3)
-more error msgs for debugging(v1.0.3)
-wakelock_sheriff whitelist enabled(v1.0.3)
-API update #8 minor bugfix(v1.0.4)
-more clear descriptions on whitelisting apps added.(v1.0.4)
-API update #9(v1.0.4)
-thread_booster added for performance(v1.0.5)
-API bugfixes(v1.0.5)
-tweaked a few things on v1.0.5(v1.0.5)
-API update #14 & thread_booster improved(v1.0.6)
-thread_booster_hell improved(v1.0.7)
-thread_booster_hell improved & boot tweaks improved(v1.0.8) - FINAL VERSION
Click to expand...
Click to collapse
if anyone would like to contribute code to this project, you can find the git page here.
Is this universal?
Yes it is.
https://img.bi/#/KbV2uqR!YdAtN1zEn5Ifu2xuf7ldAtGVXLImRcfo05iLjcIc
Same location as busybox
https://img.bi/#/ETKmp3n!1gdXECQ443woGPXFDBKFZkyUR1Wrt0DWPVwBxF8T
Sent from my GT-I9505 using XDA Free mobile app
Does it modify any system files? Or just installs itself in the init.d folder? Any requirements do I need before installing the mod? If possible, how do I remove it? Sorry for asking so many questions, want to be sure before flashing this on MIUI rom.
alexbrian21 said:
Does it modify any system files? Or just installs itself in the init.d folder? Any requirements do I need before installing the mod? If possible, how do I remove it? Sorry for asking so many questions, want to be sure before flashing this on MIUI rom.
Click to expand...
Click to collapse
you can read the description on how to install the mod.
as for removing, you can uninstall the mod by choosing 4th option'restore lists'.
new update!
-new bootup tweaks and bugfixes added(v0.0.3)
Click to expand...
Click to collapse
Getting ready to install and try this out. Thanks for the effort.
hoholee12 said:
new update!
Click to expand...
Click to collapse
Can you put extra detail on how to install this? I'm getting a bit confused. The terminal can't find the file that I want to install. Maybe a video guide would help? And does it conflict with other mods?
alexbrian21 said:
Can you put extra detail on how to install this? I'm getting a bit confused. The terminal can't find the file that I want to install. Maybe a video guide would help? And does it conflict with other mods?
Click to expand...
Click to collapse
i managed it with stericson busybox installer and smanager. first looked where busybox is located, moved file to it, Renamed as .sh and selected as executable with su rights + install arguments. Then use terminal to start
Sent from my GT-I9505 using XDA Free mobile app
I still think a video guide would be better. HeathenMen can you make one? It'll be very useful for people with installing problems.
Questions
A few questions I'm confused about in the OP. You're referring to CPU Schedulers so is this tweak adjusting i/o schedulers or cpu governors. I usually dont see terminology as "CPU scheduler" Or is it not doing anything with either of what I mentioned. Reason being I'm running a performance gov with screen on and don't want slow that down as with greenify and screen dim, etc I have amazing battery life with screen on performance gov. But I of course want more performance out of my phone.
Thanks
Josh
alexbrian21 said:
I still think a video guide would be better. HeathenMen can you make one? It'll be very useful for people with installing problems.
Click to expand...
Click to collapse
Had some problems myself but it worked. As soon as ive got time for it, why not
Sent from my GT-I9505 using XDA Free mobile app
It's only for samsung device or all?
Well, i cant run, because not such directory on sys/kernel/debug/ bla bla :silly:
HeathenMan said:
Had some problems myself but it worked. As soon as ive got time for it, why not
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks a lot. I myself am having problems installing it as well.
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
ZeroDroid said:
It's only for samsung device or all?
Well, i cant run, because not such directory on sys/kernel/debug/ bla bla :silly:
Click to expand...
Click to collapse
I asked in the first page. It's universal.
alexbrian21 said:
Thanks a lot. I myself am having problems installing it as well.
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
I asked in the first page. It's universal.
Click to expand...
Click to collapse
Yes universal but not all kernel have sched feature
Run : my error /sys/kernel/sched_features: no such file or directory
I see with root explore and yes file not found
i added a fix. please redownload.
some kernels dont have debugfs mounted at boot. this might fix it
Not able to create init.d folder or create scripts within folder b/c read-only. I'm using custom AEL kernel with init.d support, folder already there with several scripts, used root explorer making directory r/w, but still read-only error. This error happens in terminal after typing su, then sched_tuner, then option 2. Option 1 works, just can't stick on boot. Script works great, thanks for help.
MOVED TO - https://forum.xda-developers.com/android/software-hacking/roms-android-acceleration-strip-t3848806
What does this do?
This flashable ZIP file attempts to speed up Android OS by implementing tweaks and removing programs that the average Android user may not utilize. It adds build.prop tweaks and removes a lot of applications installed in system/app and system/priv-app. This means that this ZIP file will free up space in your hard drive and increase performance since not as many apps will be running in the background.
This zip file will manipulate/edit...
system/etc/init.d
build.prop
Installed Android applications
Hosts file
Before doing anything, be sure to backup with recovery since things might go wrong.
How to install/update:
1. Download ZIP
2. Boot into recovery mode and make a BACKUP first!
3. Flash my ZIP file
4. After the process, delete/wipe dalvik-cache and cache partitions
5. Done! Now boot into the system and wait for the boot process to take you to lock screen
6. Open Settings > Apps > : (3 dots on the top right corner) > Reset app preferences (If you do not have this step, you can skip)
7. Done! After flashing, I recommend calibrating battery (you do not need to do this every update!)
For updates, just download the updated ZIP and flash it! Easy peasy.
Common Issues:
Boot Loops
Black Screen on Startup
Phone won't boot
Settings do not respond when opened
Certain apps lost functionality
Spam messages saying: "Unfortunately android.app has stopped working"
Any issue that comes up, restore it from backup. Usually, uninstalled system apps are what cause these issues. To prevent these issues, you will need to remove some lines in the updater-script in my ZIP and reflash it.
Compatibility:
This ZIP file should be compatible with all ROMs (even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge using stock.
Tested to be working on LineageOS 16.0 S7 Edge Build 2 17.09.2018
My Device Info:
Samsung S7 Edge - G935W8
Superman ROM v3.0.1 OREO
SuperStock Kernel v3.1.0
Nova Launcher v6.0beta4
Ultimate Performance Mod v13
Bett3r Battery and Performance Mod v1.7
Changelog:
1.5beta2 *UNTESTED*
- Fixed the HOSTS file
. - Remove invalid rows
. - Added 13,000 new lines (now containing over 61,000 lines!)
. - Removed useless lines
. - Sorted alphabetically
. - Removed empty lines
1.5beta *UNTESTED*
- Added a LOT more Init.d tweaks (increases performance by managing cpu and ram better and many more)
- Added a LOT more BuildProp tweaks (increase performance)
- Added a hosts file (contains over 48,000 lines!) that blocks malware and ads, thus increasing speed
1.4.1
- Tested and fixed some issues. Includes all changes below.
- Ignore the error, "failed to mount /cache". It will function regardless
1.4beta3 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Included v1.3.3 changes
1.4beta2 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added buildprop tweaks
- Does not include v1.3.3 changes
1.4beta *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added init.d tweaks
- Does not include v1.3.3 changes
1.3.3
- Added ADAPT SOUND and PRINTERS to debloat list
1.3.2
- Added a build prop tweak to utilize hyperthreading
1.3.1
- Added more apps to debloat list. Expect more apps to be added in the future
1.3
- Added more to debloat list
- Added buildprop tweaks
- This should fix error 7 in TWRP
- COMING SOON: Init.d tweaks
1.2.1
- I'll add build.prop and init.d tweaks when I can
- More apps to added to debloat. BACKUP
- After flashing be sure to wipe cache and dalvik
1.2 - DO NOT DOWNLOAD. ERROR IN UPDATER-SCRIPT. FIXING IN v1.3
- Added init.d tweaks
- Added BuildProp tweaks
- Added more to debloat list
1.1
-Added more to debloat list, be sure to backup just in case anything goes wrong!
1.0
- Init
Permissions:
- Feel free to take anything from the zip file, however, you must credit me as creator.
- If you are reuploading this on another website, add a link to this xda thread.
I do unzip, delete some script i use, zip again, try flash then error in flashing.
Try to flash the original but no change anything.
Can u explain more detail please? Sorry bad english i'm from indonesia.
Love flasing said:
I do unzip, delete some script i use, zip again, try flash then error in flashing.
Try to flash the original but no change anything.
Can u explain more detail please? Sorry bad english i'm from indonesia.
Click to expand...
Click to collapse
version 1.3 is working and I haven't tested 1.4beta. Try flashing 1.3.2
If you removed some stuff it is likely you accidentally removed important pieces of code check the lines to make sure that you did not remove the ; symbol
Thanks sir dev! My 1gb ram exmobile now blazing fast!
Samir96 said:
Thanks sir dev! My 1gb ram exmobile now blazing fast!
Click to expand...
Click to collapse
https://forum.xda-developers.com/an...tion-strip-t3848806/post77762441#post77762441
If you want more speed, this is the more updated version FYI ^^^