My Xperia M is not booting up. It is not in boot loop but stuck on sony logo. I tried to flash a new rom using using CM Recovery but got an error on installation part. So I tried to open internal memory but again I got this error (link for pictures given, cant write full link).
dropbox.com/s/o70pxlhzrcaxifm/IMG_20150731_190039064.jpg
dropbox.com/s/qj67ksusu3tf5m0/IMG_20150731_190435348.jpg
U tried to install a ROM.
but is ws an error
u cant boot in recovery
phone stuck at sony logo
but..phone not in boot loop....
kumarvinay071 said:
My Xperia M is not booting up. It is not in boot loop but stuck on sony logo. I tried to flash a new rom using using CM Recovery but got an error on installation part. So I tried to open internal memory but again I got this error (link for pictures given, cant write full link).
dropbox.com/s/o70pxlhzrcaxifm/IMG_20150731_190039064.jpg
dropbox.com/s/qj67ksusu3tf5m0/IMG_20150731_190435348.jpg
Click to expand...
Click to collapse
You might have better luck asking in your specific device forum.
http://forum.xda-developers.com/showthread.php?t=2484283
If the phone is not bricked,perhaps you can flash a latest recovery,preferably twrp since cwm is getting outdated. Just install odin,flash the recovery and try installing the rom from twrp using external sd card. Hope it helps.
Sent from my GT-I9300 using XDA Free mobile app
may be you are using a wrong cm recovery.
Related
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Redzo said:
Try removing battery for 2-3 minutes and se if that can get it to boot or at least get to recovery.
Click to expand...
Click to collapse
I'm in recovery mode now.
I'll look in the forum for a modus opererando from that point but again any additional suggestion/help is welcome
ok.
I'm in the recovery mode v5.0.3.5 by TZ (guess is the phanton owner)
My SD card is formated and I've copied the phanton.zip file. tried to install... no luck. also copied the sony factory file and still no luck.
the menu gives me different options but not sure what to do. will still look in the forum but no luck so far....
I have not rooted the device (and do not know what to do), still cannot flash the factory rom with flashtool (as described above) ...
Any help on where to start from the recovery mode?
francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
kazabubu said:
Welcome to XL world!
I think that you are a little bit confused!Relax...
First of all...,ftf is stock rom and .img is kernel.
So,first u have to unlock the bootloader and then u have to flash stock rom again otherwise u'll get into bootloop.Then u have to flash a custom kernel with CWM (which u can find in Development sector or in Original Development sector) and then flash a custom ROM via CWM from Development sector...
Hope I helped...
Click to expand...
Click to collapse
thanks Kazabubu, I understand the steps you described and :
1) I have successfully unlock the bootloader
2) TRIED to flash the stock rom (ftf) (using flashtool, in flash mode ) but the phone was staying in "Preparing files for flashing" and then disconnecting
3) I think I managed to flash a custom kernel ( phanton) in fastboot mode
4) reboot in recovery mode
5) tried unsuccessfully to install a ROM (stock or custom) under recovery mode.
NOW... extremely strangely I left my phone connected to my PC and went to buy some stuffs... When I came back flashtool had flashed the stock rom... and it's working again.... do not ask me how... I have no idea.
I''ll leave it like that and will "only" try to root it as it is.
I'll close the thread and again thanks for you help guys!
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
can u help me ?
varunpilankar said:
Just flash a custom kernel first then boot into CWM and then flash a SuperSU.zip from the recovery.. It will directly root your phone..
Here is the link for the Zip file..http://download.chainfire.eu/204
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
I tried to root via VROOT , next step i installed http://forum.xda-developers.com/showthread.php?t=2598697
dexteroid.
now my phone wont start, it only shows black screen....can you help me
Is it showing you red light when you keep on charge?
Sent from my LT26ii using xda app-developers app
okay chill!
Open flashtoot Dont connected your phone
click on the thunder logo..then flashmode the choose the file you want to flash..it will prepare the file..
After that it will prompt you to connect your phone
press vol.down and connect your phone!
Hope it helps~
francoism said:
hi,
I've been looking around the forum and couldn't find a solution for my problem
I bought a Xperia L for my child and based on my experienced with my Nexus 4 I wanted to install a custom Rom.
the phone is free sim. I 'm allowed to free bootloacker it.
After enabling USB debbugging ON and installing the drivers with flashtool (vers 9.13 on win 7 64bit) I managed to boot in flash mode and unlock the bootloader via flashtool (thanks to the key provided by Sony) .
the phone rebooted with the Sony logo and those coloured lights.AND USB debbuging OFF !!!!
I've tried to flash a original sony ftf (in put into the firmware C2105_15.0.A.2.17_CE or C2105_15.3.A.1.14_CE file in flashtool) but no luck. it tells me that is preparing the files and then reboot into "device" (usual reboot)
After removing the battery I've rebooted in fastboot and somehow managed to flash the custom Rom (.img) from Phantom (I can see his logo when I turn the phone on). but that's it.
I'm somehow suspecting the USB debbuging OFF creating me issues and the SD card being blank to not help either.
I've installed the PC companion lately but it does not recognized it either...
I'm quite a newby and my goals are 1st to have it working again then to root it in order to install a custom ROM.
Any help or suggestion is welcome
Click to expand...
Click to collapse
its very easy my friend just download cm11 google for xperia l transfer it to ext sd card then go to recovery mod factory reset everything wipe cache and delvik too then install cm11 zip
Hello guys,
i have a karbonn a 18 with cwm recovery . flashed stock rom following the guide given on xda for flashing stock rom via flashtool v.4.0 and now phone is stuck at boot logo. phone can boot into recovery only. kindly help me out.
Oh great. You still have access to your recovery, simply download any rom available for your device. Transfer it to your device, if your device does not have an SD slot, simply push the rom.zip to your device via adb.
Once you have the ROM on your device, simply wipe data and cache and install the ROM.
Please remember, the next time you flash a ROM. Please make a back up as it will save you in such situations like this.
If I helped, don't hesitate to hit that Thanks button
did that but didnt work before only
You have to download a stock rom compatible woth your device and install it through odin may be it works
Sent from my GT-S6812 using XDA Premium 4 mobile app
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
Hi,
I want to learn all cool stuff about phones and thats why I rooted my Sony Xperia z c6603 unlock boot loader and then flash twrp custom recovery using twrp app. It shows flashed successfully. But when I boot into recovery mode. It didnt boot in recovery mode. Every times it boots in Android only. I tried every thing used hard key, downloaded app to boot into recovery but all fails. So, I tried to flash recovery using adb tool but when I flash it shows an error which I have attached in this thread. So, plz help where I have done wrong.