Related
I would like to report that at least we have SUCCESSFULLY flashed and rooted MJ7 UK firmware using Mobile Odin Pro 3.85.
This is for the SM-N9005 Qualcomm Snapdragon model.
We were originally rooted on MJ1 by using Root de la Vega, with Knox 0x0, which made the Mobile Odin flash possible.
SUCCESSFUL FIRMWARE VERSIONS ROOTABLE: MI7, MJ1, MJ3
UNSUCCESSFUL ROOT :MJ6 and later
NOTE: THIS DOES NOT RESET YOUR KNOX if it is 0x1.
Originally reported in a Malaysia forum here: - XDA user williamyi (WiLyi on Lowyat.net forum) was the first user to report trying this method with success. Thank him in post 2 !!
Success 1 - williamyi
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477527
Success 2 - joytest
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477946
Success 3
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64482052
Success 4
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64493286
Success 5
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64494080
Knox remains 0x0
All we need to do is to to reinstall Xposed and its mods.
Thanks @Chainfire !!!!!
Many other XDA users are also now reporting success by flashing to MJ7 using this method.
Steps: (thanks to WiLyi of Lowyat.net forum) aka @williamyi in XDA
1. Download UK MJ7 firmware.
2. Extract the tar.md5 (I placed in internal SD - not sure if this make any differences)
3. Open the tar.md5
4. Check:
i. Everroot
ii. Inject SuperSU
iii. Inject Mobile Odin
5. Flash
NOTE: Mobile Odin will throw a standard warning about tripping Knox. That can be ignored (we did). Remember to tick Everroot so that you will be rooted immediately upon flashing.
NOTE: Mobile Odin "A compatible device was detected, but with an unexpected partition layout. Mobile ODIN cannot operate. This is a common error on CM and MIUI ROMs on some devices."
This can be solved by uninstalling and reinstalling SuperSU or its updates.
joytest said:
I would like to report that at least 2 users have SUCCESSFULLY flashed and rooted MJ7 UK firmware using Mobile Odin Pro 3.85.
More to come as it was reported in a Malaysia forum here
Success 1
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477527
Success 2
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477946
Knox remains 0x0
All we need to do is to to reinstall Xposed and its mods.
Thanks @Chainfire !!!!!
Steps: (thanks to WiLyi of Lowyat.net forum)
1. Download UK MJ7 firmware.
2. Extract the tar.md5 (I placed in internal SD - not sure if this make any differences)
3. Open the tar.md5
4. Check:
i. Everroot
ii. Inject SuperSU
iii. Inject Mobile Odin
5. Flash
Click to expand...
Click to collapse
You beat me on posting this. Hopefully this could help those who which to update to latest firmware without tripping the Knox. Happy flashing everyone
But you can't run mobile odin without root it says?
Sent from my SM-N9005 using Tapatalk
Drizzy xS said:
But you can't run mobile odin without root it says?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I had initially rooted with the Root de la Vega method, and Knox was still 0x0. I wanted to test a newer ROM MJ7 so after @williamyi had succeeded I tried as well.
We're all happy campers now.
Drizzy xS said:
But you can't run mobile odin without root it says?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I have rooted the firmware using Root De La Vega since day the early days and gotten the root access without tripping the knox.
This time I flash the UK's MJ7 firmware using Mobile Odin Pro 3.85 and successfully update the firmware from the first MJ1 to the latest MJ7 without tripping the knox as shown in the first link in the first post
joytest said:
I had initially rooted with the Root de la Vega method, and Knox was still 0x0. I wanted to test a newer ROM MJ7 so after @williamyi had succeeded I tried as well.
We're all happy campers now.
Click to expand...
Click to collapse
Dam is there no way to root mj7? I tried to root it using odin and URDLV but every time I try I get the odin fail error and it doesn't work
Sent from my SM-N9005 using Tapatalk
*realised you need to be rooted first to be able to flash via mobile odin
Drizzy xS said:
Dam is there no way to root mj7? I tried to root it using odin and URDLV but every time I try I get the odin fail error and it doesn't work
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Maybe this guide will help
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64362662
credits @antt00
Will work only for people with old bootloader and yet rooted
geek78 said:
Will work only for people with old bootloader and yet rooted
Click to expand...
Click to collapse
Which firmware are you in now? As far as I know firmware later than BMJ1 comes with a new bootloader.
You may try to root it using URDLV first before flashing to later firmware using Mobile Odin. Alternatively you may try method in post 8
williamyi said:
Which firmware are you in now? As far as I know firmware later than BMJ1 comes with a new bootloader.
You may try to root it using URDLV first before flashing to later firmware using Mobile Odin. Alternatively you may try method in post 8
Click to expand...
Click to collapse
Thanks but it was not a question
For SM-N9005 only
Please do mention that it is only for SM-N9005 only. I hope that N900 gets some good stuff as well
um009 said:
Please do mention that it is only for SM-N9005 only. I hope that N900 gets some good stuff as well
Click to expand...
Click to collapse
Ok done.
joytest said:
Ok done.
Click to expand...
Click to collapse
Also add that this is tested on MJ1 bootloader only. URDLV will definitely trip MJ3 bootloader and above. Dunno about MOP.
Add another to the success stories, still had/have the MJ1 bootloader, now up to MJ7.
Sent from my SM-N9005 using Tapatalk
awww I was actually hoping you mean like flashing a recovery or kernel with mobileodin and keeping the knox 0x0 ;P... too much wishful thinking I guess.....
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
MCube74 said:
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
Click to expand...
Click to collapse
MJ8? Are you using HK firmware? Not sure if the bootloader is the same in MJ7 or not, but if they are using a new bootloader, then I believe there is no way to downgrade the bootloader
MCube74 said:
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
Click to expand...
Click to collapse
No..you cannot as you already have new bootloader when your flash the MJ8 firmware. Even if you use RDLV..you will still trip your Knox as RDLV meant to those who still on the old bootloader.
MCube74 said:
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
Click to expand...
Click to collapse
If you flashed the MJ8 file as it comes straight from Samsung then no, you can't downgrade without triggering the Knox counter.
If it was a URDLV version then yeah.
Sent from my SM-N9005 using Tapatalk
For those who want root and custom recovery on 4.4.2 here is my way without root binary errors or recovery issues....
1. Downloaded 4.4.2 for Canada from Sammobile and flash via odin
2. Install this Recovery https://mega.co.nz/#!kEUzAS5a!a6TA0xuSg-pEYxSmZxnjmcB7cNOwRCZ_MqMiwXvD65c via odin Credits to Angel_666
3. Install this SuperSU http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip?retrieve_file=1 via TWRP Recovery
4. Reboot and enjoy
Thats how i did and have now fully working 4.4.2 with custom recovery and root access ...
hey
Thanks.
now better
Already rooted
I already have my tab 3 10.1 rooted so if i install the new KitKat 4.4.2 will i need to reroot??
lindsay56 said:
I already have my tab 3 10.1 rooted so if i install the new KitKat 4.4.2 will i need to reroot??
Click to expand...
Click to collapse
Ofcourse , you'll need to reroot it .
Don't forget to press the thanx button!!!!!
Sent from my GT-P5210 using XDA Premium 4 mobile app
If i am on 4.2 stock rooted (US version), will this Canadian 4.42 ROM and root procedure work for me?
Thanks
OKAstro said:
If i am on 4.2 stock rooted (US version), will this Canadian 4.42 ROM and root procedure work for me?
Thanks
Click to expand...
Click to collapse
Yeah , It will work . I have also USA version . Just download firmware from sammobile & flash through odin v3.09 . And then follow what this guide says .
Don't forget to press the thanks button!!!!!
Sent from my GT-P5210 using XDA Premium 4 mobile app
Use this app to flash recovery img file, in case you have difficulties installing cwm or philz: https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
mzheng086 said:
Use this app to flash recovery img file, in case you have difficulties installing cwm or philz: https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Click to expand...
Click to collapse
following this guilde you need custom recovery to root so you can't use root app's without root
Can any one say whether the Canadian 4.4.2 has multi user enabled, if not has any one tried to apply the multi user hack.
Newbie question. If I wanted to temporarily disable the root so that apps which may have an issue with rooted device can continue to work how would this be done. I saw in one forum where someone said they were only able to do this with the 4.2.2 ROM.
Legendsmoker -
I just got prompted when starting KIES for the KitKat update. I have the US version of the Tab 3 10.1 (5210). I assume I can use your root steps to root the US KitKat firmware?
Here's what KIES says:
Current firmware version : PDA:NB2 / CSC:NB2 (XAR)
Latest firmware version : PDA:NH2 / CSC:NH2 (XAR)
Thanks
OKAstro said:
Legendsmoker -
I just got prompted when starting KIES for the KitKat update. I have the US version of the Tab 3 10.1 (5210). I assume I can use your root steps to root the US KitKat firmware?
Here's what KIES says:
Current firmware version : PDA:NB2 / CSC:NB2 (XAR)
Latest firmware version : PDA:NH2 / CSC:NH2 (XAR)
Thanks
Click to expand...
Click to collapse
Sure you can
Wysłane z mojego SM-G900F przy użyciu Tapatalka
Thanks, rooted without any problem.
norms123 said:
Newbie question. If I wanted to temporarily disable the root so that apps which may have an issue with rooted device can continue to work how would this be done. I saw in one forum where someone said they were only able to do this with the 4.2.2 ROM.
Click to expand...
Click to collapse
Use the xposed framework and there is a plugin called rootcloak.
Fix?
I recently did the Samsung update to Android 4.4.2. I've tried multiple times to root my device, but each time, the SuperSu has not functioned properly. The first time it would not update correctly, so I tried a different .zip and the SuperSu in that one would freeze every time I would try to use it. Will this fix the problems I am having?
thatgentleman said:
I recently did the Samsung update to Android 4.4.2. I've tried multiple times to root my device, but each time, the SuperSu has not functioned properly. The first time it would not update correctly, so I tried a different .zip and the SuperSu in that one would freeze every time I would try to use it. Will this fix the problems I am having?
Click to expand...
Click to collapse
just follow my guide
LegendSmoker said:
just follow my guide
Click to expand...
Click to collapse
Yeap! as LegendSmoker is referring, it seems chainfire SuperSU-v2.02 is the only one to survive 4.4.2 anti-root attacks!
LegendSmoker said:
just follow my guide
Click to expand...
Click to collapse
Thank you. Worked perfectly!
Updated files help
Thanks so much. i kept using guides that were for older android versions ergo older non-updated root files and recovery files :good::good:
Hi everyone,
Here i bring a quick way to FULL Restore/Update Stock to v10j no matter from which version you are coming from. (E.g...v10e,v10d,v10i)
This will restore/update your phone to full stock v10j deleting all trace of root and TWRP Custom Recovery, your internal storage will be untouch.
STEPS :
---------
1- Download BootStack zip T-Mobile Users Click Here , MetroPCS Users Click Here
2- Download Return2Stock zip T-Mobile Users Click Here , MetroPCS Users Click Here
3- Reboot to TWRP (Custom Recovery)
4. Flash LG G STYLO BOOTSTACK Zip file
5. Flash LG G STYLO Return 2 Stock Zip file
6. Wipe CACHE and DALVIK
7. Reboot (at this point you no longer have Root and TWRP)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Reserve...
Thank you.
I rooted to gain access to ad block for apps but now with Lollipop the app does not work. So I was thinking of going back to stock. Thanks for your hard work.
Anyone know of a good app that blocks ads?
Roism said:
Thank you.
I rooted to gain access to ad block for apps but now with Lollipop the app does not work. So I was thinking of going back to stock. Thanks for your hard work.
Anyone know of a good app that blocks ads?
Click to expand...
Click to collapse
adaway works good for me
If I used the one click root method to root my device, can I do re root doing that method again and regain twrp?
Can anyone report how the 10j update is running if it has changed anything for the better or sped up the device I know its for the stagefright patch but there is supposed to be other fixes in it also to speed up things ????
---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------
ArtifexEra said:
If I used the one click root method to root my device, can I do re root doing that method again and regain twrp?
Click to expand...
Click to collapse
YES, if you flash this Restore Rom or any other rom just follow the right instructions about Root like if you are in 5.1.1 use the LG_LP5.1.1 One Click Root Method in This Thread (Click Here) and follow the instruction for TWRP
jigglemoe said:
Can anyone report how the 10j update is running if it has changed anything for the better or sped up the device I know its for the stagefright patch but there is supposed to be other fixes in it also to speed up things ????
---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------
Click to expand...
Click to collapse
about speed i haven't had a performance issue at all since the first 5.1.1 update, so my device still/been snappy since then.
Okay so i updated my phone to the 10j upgrade and also re rooted. Do i need to keep the bootstack zip and the return to stock zip? or can i just delete those zip files?
ArtifexEra said:
Okay so i updated my phone to the 10j upgrade and also re rooted. Do i need to keep the bootstack zip and the return to stock zip? or can i just delete those zip files?
Click to expand...
Click to collapse
No need to keep them just do a backup using TWRP to be safe in near tweaks or updates or any mess
I don't have a computer to update to 10j can I use that bootstack.zip with the debloated Rom? Basically can I use that bootstack.zip by itself to update the radio/modem/stagefright?
Sent from my LG-H631 using XDA Free mobile app
mrbox23 said:
I don't have a computer to update to 10j can I use that bootstack.zip with the debloated Rom? Basically can I use that bootstack.zip by itself to update the radio/modem/stagefright?
Sent from my LG-H631 using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can and/or you can use @GameTheory. V10j which have the bootstack+system and is pre-rooted (no need to use a root method)
DrakenFX said:
Yes you can and/or you can use @GameTheory. V10j which have the bootstack+system and is pre-rooted (no need to use a root method)
Click to expand...
Click to collapse
I tried gametheory's 10j it softbricked my device. I had to use the original LP5.1.1 to get it back. Will flashing your bootstack and v4 debloated together work? I don't have a computer to kdz my way out of it. Will flashing your bootstack put recovery back to stock?
My stock ROM backup is the original 5.0.1 firmware and updated with the LP5.1.1, anything 10j softbricks device and I need to flash the LP update to get it back.
Sent from my LG-H631 using XDA Free mobile app
mrbox23 said:
I tried gametheory's 10j it softbricked my device. I had to use the original LP5.1.1 to get it back. Will flashing your bootstack and v4 debloated together work? I don't have a computer to kdz my way out of it. Will flashing your bootstack put recovery back to stock?
My stock ROM backup is the original 5.0.1 firmware and updated with the LP5.1.1, anything 10j softbricks device and I need to flash the LP update to get it back.
Sent from my LG-H631 using XDA Free mobile app
Click to expand...
Click to collapse
Yes flashing Bootstack+Debloated_v4 work together ,(both are for v10j update)
What you mean anything v10j softbrick?
GT updated the v10j zip a few days ago adding the bootstack+preroot and Is that including my Stock Restore? If you go Stock Restore make sure to have the TWRP img file to flash while still in recovery cuz as soon you leave the recovery without flashing TWRP again youll loose TWRP and need PC to get back...
PS. Wipe Cache+Dalvik after flashing everything.
DrakenFX said:
Yes flashing Bootstack+Debloated_v4 work together ,(both are for v10j update)
What you mean anything v10j softbrick?
GT updated the v10j zip a few days ago adding the bootstack+preroot and Is that including my Stock Restore? If you go Stock Restore make sure to have the TWRP img file to flash while still in recovery cuz as soon you leave the recovery without flashing TWRP again youll loose TWRP and need PC to get back...
PS. Wipe Cache+Dalvik after flashing everything.
Click to expand...
Click to collapse
Cool it worked thanks. Turned out debloated ROM was not for me though lol
Sent from my LG-H631 using XDA Free mobile app
If I use the v10j update will it lock my bootloader http://androidforums.com/threads/me...-v10j-rom-flashable-updated-9-26-2015.926221/ this post leads me to believe it will Im on the t mobile variant Im rooted and have installed twrp in which case Im sure I will loose both of then but I dont want a locked bootloader
ipeedalil said:
If I use the v10j update will it lock my bootloader http://androidforums.com/threads/me...-v10j-rom-flashable-updated-9-26-2015.926221/ this post leads me to believe it will Im on the t mobile variant Im rooted and have installed twrp in which case Im sure I will loose both of then but I dont want a locked bootloader
Click to expand...
Click to collapse
No, your bootloader will not be locked. There's a setting in developer options called "Enable OEM Unlock" which unlocks the bootloader. There's nothing I wrote in that post that suggests your bootloader will be locked. You will also keep root and twrp if you flash my v10J from that post.
ipeedalil said:
If I use the v10j update will it lock my bootloader http://androidforums.com/threads/me...-v10j-rom-flashable-updated-9-26-2015.926221/ this post leads me to believe it will Im on the t mobile variant Im rooted and have installed twrp in which case Im sure I will loose both of then but I dont want a locked bootloader
Click to expand...
Click to collapse
You can flash this TWRP after going back to stock..
twrp-2.8.7.0-10j.img
Found here..
https://www.androidfilehost.com/?w=files&flid=33154
TWRP Will flash an image. Just make sure you don't reboot after flashing stock stuff stay in the recovery you won't get back into TWRP if you reboot right away. Also find the supersu zip so you can root.
total noob here
can anyone give me a step by step on how to install stock firmware on the lg ms631 without using twrp? I see threads that say use LG Flash Tool, but it says to select 'CDMA' and this is a GSM phone, so I want to make sure I won't damage it. Thanks for any help you could give me.
Follow those directions, there's nothing wrong with them.
i tried this and ended up in an lg logo bootloop....tried to go into recovery on lg h631 and my only option is a factory reset on this phone... recovery wont even come up..tried that and only get a black screen....it turns off apparently....any help?
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------[/QUOTE]
Hi folks . Dear @Chainfire update your CF-Auto-Root base and now we get opportunity to have root with the simplest method ! It works now on 5.02 and 5.1.1 stock firmwares . Sorry but knox is tripped .
Now this works on SM-T530 , SM-T530NU , SM-T535 , SM-T532 , SM-T533 ,SM-T330NU , SM-T331
Complete list you can see on https://autoroot.chainfire.eu/ .
HOW INSTALL :
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA(AP)
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin file, press the PDA(AP) button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
DOWNLOADS:
SM-T530
SM-T530NU
SM-T533
SM-T535
SM-T330NU
SM-T331
Added SM-T330NU and SM-T331
worked on 533 but are we now able to install twrp permanent?? anyway thanks a lot for root!
looking-g said:
worked on 533 but are we now able to install twrp permanent?? anyway thanks a lot for root!
Click to expand...
Click to collapse
You better ask @HausiX10 about this in PM .
Wow thank you for this! I successfully rooted my Tab 4 SM-T330NU using 5.1.1 on the first attempt with the files provided here. I had been trying all weekend to successful root my device using other methods and files, but for some reason they all resulted in bootloops. I kept reading through the troubleshoot forums for a solution, but nothing worked. I wish I would have found this thread sooner, it would have saved me a lot of problems!
bootloop
Hi I'm stuck in bootloop; set warranty bit: kernel. Any solutions?
Still working?
"You can find more detailed instructions and assistance at XDA." Mhm, I am on XDA so where are that detailed instructions? And when I finished root Unified daemon, Media memory and TouchWiz - home are stopping working. Is it normal?
I need sm-t537v please
What about the bootloader?
repey6 said:
Hi folks . Dear @Chainfire update your CF-Auto-Root base and now we get opportunity to have root with the simplest method ! It works now on 5.02 and 5.1.1 stock firmwares . Sorry but knox is tripped .
Now this works on SM-T530 , SM-T530NU , SM-T535 , SM-T532 , SM-T533 ,SM-T330NU , SM-T331
Complete list you can see on https://autoroot.chainfire.eu/ .
HOW INSTALL :
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA(AP)
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin file, press the PDA(AP) button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
DOWNLOADS:
SM-T530
SM-T530NU
SM-T533
SM-T535
SM-T330NU
SM-T331
Click to expand...
Click to collapse
Hi @repey6. Thanks for the tutorial.
Do you know if I need to worry about unlocking the bootloader on my device? It's a SM-T531 (Brazil) running 4.4.2.
@Chainfire's auto-root page warns that flashing the auto-root with the bootloader locked will probably brick it, but I'm so noob that I don't even know if mine is locked or not. I can only imagine that it is, since I haven't done anything close to flashing anything on this device.
Thanks for your attention.
BourbonCowboy said:
Hi @repey6. Thanks for the tutorial.
Do you know if I need to worry about unlocking the bootloader on my device? It's a SM-T531 (Brazil) running 4.4.2.
@Chainfire's auto-root page warns that flashing the auto-root with the bootloader locked will probably brick it, but I'm so noob that I don't even know if mine is locked or not. I can only imagine that it is, since I haven't done anything close to flashing anything on this device.
Thanks for your attention.
Click to expand...
Click to collapse
Hi. Your bootloader is not unlocking. But supersu is not actual now. Magisk root is better.
So how to I unlock it?
repey6 said:
Hi. Your bootloader is not unlocking. But supersu is not actual now. Magisk root is better.
Click to expand...
Click to collapse
Thanks for the answer! So, how do I unlock the bootloader then? Haven't been able to find it here in XDA. Also, I've found a post here on the forum where a user claimed Magisk didn't work in 5.0.2 because the kernel was too old. Do you know if Towelroot is better?
Pls help. :crying:
BourbonCowboy said:
So how to I unlock it?
Thanks for the answer! So, how do I unlock the bootloader then? Haven't been able to find it here in XDA. Also, I've found a post here on the forum where a user claimed Magisk didn't work in 5.0.2 because the kernel was too old. Do you know if Towelroot is better?
Pls help. :crying:
Click to expand...
Click to collapse
have you found a solution? same problem here!!!!!!!!!!!!!
This is stock QA2 Marshmallow firmware .. If you simply want to restore back to stock for any reason or wanting to update .. enjoy!
AP_N920TUVS4DQA2_CL9831985_QB12244006_REV00_user_low_ship.tar.md5
BL_N920TUVS4DQA2_CL9831985_QB12244006_REV00_user_low_ship.tar.md5
CP_N920TUVS4DQA2_CL9831985_QB12244006_REV00_user_low_ship.tar.md5
CSC_TMB_N920TTMB4DQA2_CL9831985_QB12244006_REV00_user_low_ship.tar.md5
https://www.androidfilehost.com/?fid=745425885120706315
File is corrupted pls reload.
carlosjcar said:
File is corrupted pls reload.
Click to expand...
Click to collapse
Really i will check in a few minutes
Just downloaded, winrar says there damage or an error with the file.
New update uploaded!
Is this Firmware rootable
Could I just install BL and Modem? And keep my port note7?
215Aphillyated said:
Is this Firmware rootable
Click to expand...
Click to collapse
Yes
Sent from my SM-N920T using Tapatalk
Same steps as last updated firmware?
Can we revert back to MM if we use this? Thanks in advance.
SM-G928G..S6 Edge Plus
You can either use CF Root or Root within TWRP ..
Oops sorry disregard my question..overlooked it in Op. Again sorry.
Note 4 UXedge V10
Can you just flash twrp and jovy23's stock modified kernel to this? Also is rooting on this phone as simple as installing twrp and installing su from recovery?
---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
JUSMEJOSE said:
You can either use CF Root or Root within TWRP ..
Click to expand...
Click to collapse
Thanks.. that answered my question as i was asking it..
QA2 is MM.
will this erase data on the phone or just update? trying to help a friend fix his bricked phone. thanks
hello sir iam flash this file n920t 4 file after flash compleat but after direct start recovry mod and show this errer dm-verity vriication failed;;;need to check drk first plz sir ineed solve this iwait your rep
someone tried down from nougat to this version?
i was on 7.0 nougat i downgraded to this one now EMEI is showing unknown what the heck did you put into this file it messed up my phone?