Hi!
I own a Prestigio 3400 and I believe I'm in need of an android 4.2.2. ROM (if I correctly understood how that whole system works).
I rooted my phone and everything was working perfectly until I decided to reboot it. Now, the phone got stuck at the booting screen (after the manufacturer logo everything turns like dark blue and stops dead in its tracks). I can access the recovery options, but nothing seems to work; tried everything, from cleaning the cache to completely wiping the system. I figured that a new OS should do the trick so I've tried to find the original firmware (long shot or a completely wrong move?) but that doesn't seem to be a thing. Also, I couldn't find any kind of ROM that would suit my phone and from what I understood (and admittedly, that's not so much) only certain ROMs go to certain phones.
Since my phone is now but a worthless brick and hours and hours of googling only left me in tears, I would greatly appreciate any kind of help or guidance.
I didn't, because I can't find it.
All of the links on the prestigio site are actually updates. The link to v.1.0.16 is the 1.0.13 to 1.0.16 update, not the firmware itself. I tried all of them though (better safe than sorry), but nothing seems to be working.
I think I found a 1.0.11 firmware but it requires the phone to be connected to the pc and seeing I can't make my pc to acknowledge the phone, that's not doing much for me. A kitkat version [for which is said that could be applied to my phone] isn't working either (installation just aborts).
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
So I've had this tablet for a while now, and normally I come here for any help, tips and guides for rooting or unbricking.
Never have I had a block in the road till now. Originally the settings kept saying "unfortunately settings and stop".
I cleared the cache first then.... didn't work. Then the date storage.... didn't work either.. and finally I went extreme.
I factory reset the thing. Major no no... Now the lock scene is gone as well as blue tooth and wifi are non accessible.
If I try opening it, it'll crash and or sometimes just reboot on its own.
I really do not want to bother anymore with fixing the error and just want to revert back to stock rom.
So does anyone have the original firm ware? It is currently running JB 4.2.2
The MODEL # is P310A
I did flash the recovery to Clockwork Recovery. Since the original recovery menu
did not have a clear 'dalvik cache' option.
Yes I understand I have royally destroyed this thing. But this thing is completely useless to me if I can't log on to the net.
-Thank you.
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread: [ROOT][RECOVERY] UNOFFICIAL Alcatel OneTouch Pop 7 p310a Tablet Thread
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
(I'm not sure where I should put this thread, and this section seemed to be the most apropriate. If it is not, sorry)
Hey.
So, I had a tablet I weren''t using. It is a Sunstech Tab7Dual, with RK3066.
I tried to turn it on, to give it to my father, who needs it. When I did, the tablet went on a bootloop. It turns on, then shows the brand's logo, and then the boot animation, and just repeats the boot animation forever. I noticed that when the device's battery is about to run out, it initiates the tablet for a half of a second.
I didn't have anything special that might mess with the system on it, just Mounts2SD and root. And I can't access recovery on this tablet (I don't have a Custom Recovery).
My PC seems to detect the device, but doesn't recognize it.
I tried SD Firmware Tool and had no success. Also had no success with RKBatchtool, that only displays a pink square instead of a green one.
What can I do?
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi! I've got myself in trouble. :crying: I've researched the forums and Google without success.
Long story short: The phone ran out of storage constantly. I'd successfully rooted the device.
The Mt657xRepartition_EN.apk used to repartition the storage got the phone stuck at the boot logo.
I can enter in recovery (Power + Volume Up) but I do not have the stock ROM to flash it back, nor I know how to use the ADB listed as one of the recovery options.
The ROM was identified as: e1911_v77_mt6628_hjy1_9p017_v20
I've photos from the phone and internal label, but as a new poster, I cannot offer the links in this message yet.
I'd no luck in finding it anywhere. It's frustrating...
Would a kind soul with the same phone provide me a copy of the firmware and point me to a tutorial on flashing it back to the phone?
I do not want to mess with the repartitioning anymore, just get the phone back to a working state so my daughter can use it again, despite it's limitations. It's a fine phone but it's awfully limited by the poor partitioning scheme of it's 4GB memory.
Any assistance will be highly appreciated.
Thanks a lot!
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I've got a Lenovo A7--40 3500-FL. I accomplished root with Kingo and installed SuperSu Pro. Successfully updated binary and what not than the screen started to flash. Booted into recovery and factory reset. Now been stuck in the boot screen, it takes about half an hour to boot but no launcher ever takes over I simple see the lock screen but it does not respond to input. I don't think the reset ever took as there is a custom boot logo and that is where I am stuck. Never installed a Rom, could never find one for the deice and I have not had much free time. Only way for me to get out of the boot loop is to drain the power. This all statrted about a month ago and I figure it is finally time to ask for help.
Lenovo Smart assistant is unable to connect and push the stock Rom. Also unable to install drivers today but that seems new and is prob related to Win 10 and not the device. Smart assistant failure makes me think somehow USB debugging was disabled but I cant be sure. Is there another way? Some sort of adb hack that will override or enable debugging? I downloaded original Lenovo rom bu can't figure out how to push it not knowing is ISm is enabled.
Thanks, I am going to try to flash from SD one more time while I wait..
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good