(I'm not sure where I should put this thread, and this section seemed to be the most apropriate. If it is not, sorry)
Hey.
So, I had a tablet I weren''t using. It is a Sunstech Tab7Dual, with RK3066.
I tried to turn it on, to give it to my father, who needs it. When I did, the tablet went on a bootloop. It turns on, then shows the brand's logo, and then the boot animation, and just repeats the boot animation forever. I noticed that when the device's battery is about to run out, it initiates the tablet for a half of a second.
I didn't have anything special that might mess with the system on it, just Mounts2SD and root. And I can't access recovery on this tablet (I don't have a Custom Recovery).
My PC seems to detect the device, but doesn't recognize it.
I tried SD Firmware Tool and had no success. Also had no success with RKBatchtool, that only displays a pink square instead of a green one.
What can I do?
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
Hello,
I currently have a JXD S6600C Tablet [Device model: S6600C-A13-01-20131100926] which is not booting up. It is switching on, but the screen is not going past the "JXD" logo. I left it switched on for several hours, but it stays stuck on that screen.
I also reset the tablet to its factory settings through the recovery mode, but it is still getting stuck on the "JXD" screen. :crying:
Also, before I encountered this particular problem, I rooted the tablet, and was installing several games and apps. I restarted the tablet after rooting it, and had no problems; it is only after I installed some games that I encountered this problem.
Now, I don't have the drivers of this particular tablet, and I don't really know what I am supposed to do.
I would be very grateful if someone would be so kind to help me with this dilemma.
Thank You.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Thank you very much. I shall do so.
As the topic said,
I accidentally format the bootloader (its a 8KB partition that asked for format before you can use it that pop up during rooting process)
The moment i hit the format button, my phone goes for a quick vibrates and died. No power, no recovery/diagnosis mode, wont charge, pc goes error on driver while connected with the phone. Tried taking the battery out and hold the power button, leave it there for 2 days, tried any other stuff. It just wont flinch.
Is the phone hardbricked? Or is the battery faults? Is there a chance that the recovery can be made just to make my phone alive again? It was hard for me to find as this phone is kinda underground brand. Any help would be appreciated. Thanks!
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread where you can ask: [Q] Phicomm FWS 710 Pro stuck before boot animation
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
HI, my grandpa bring to me these wiko rainbow stocked in boot, in a boot loop, as he only know turn on and off that kind of phone, i've excluded boot loop from trying install cwm or else.
I've tried to update from the wiko mobile site, he just change me a bit the boot logo, but still in boot loop.
Important!
I don't have access to the recovery and even to the factory mode, go on, but nothing doing still continue the boot loop.
I've tried with spflash tool, it's 2 days i don't sleep for this thing, some ideas! thank you vary much,
AxelViralix
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi! I've got myself in trouble. :crying: I've researched the forums and Google without success.
Long story short: The phone ran out of storage constantly. I'd successfully rooted the device.
The Mt657xRepartition_EN.apk used to repartition the storage got the phone stuck at the boot logo.
I can enter in recovery (Power + Volume Up) but I do not have the stock ROM to flash it back, nor I know how to use the ADB listed as one of the recovery options.
The ROM was identified as: e1911_v77_mt6628_hjy1_9p017_v20
I've photos from the phone and internal label, but as a new poster, I cannot offer the links in this message yet.
I'd no luck in finding it anywhere. It's frustrating...
Would a kind soul with the same phone provide me a copy of the firmware and point me to a tutorial on flashing it back to the phone?
I do not want to mess with the repartitioning anymore, just get the phone back to a working state so my daughter can use it again, despite it's limitations. It's a fine phone but it's awfully limited by the poor partitioning scheme of it's 4GB memory.
Any assistance will be highly appreciated.
Thanks a lot!
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi!
I own a Prestigio 3400 and I believe I'm in need of an android 4.2.2. ROM (if I correctly understood how that whole system works).
I rooted my phone and everything was working perfectly until I decided to reboot it. Now, the phone got stuck at the booting screen (after the manufacturer logo everything turns like dark blue and stops dead in its tracks). I can access the recovery options, but nothing seems to work; tried everything, from cleaning the cache to completely wiping the system. I figured that a new OS should do the trick so I've tried to find the original firmware (long shot or a completely wrong move?) but that doesn't seem to be a thing. Also, I couldn't find any kind of ROM that would suit my phone and from what I understood (and admittedly, that's not so much) only certain ROMs go to certain phones.
Since my phone is now but a worthless brick and hours and hours of googling only left me in tears, I would greatly appreciate any kind of help or guidance.
I didn't, because I can't find it.
All of the links on the prestigio site are actually updates. The link to v.1.0.16 is the 1.0.13 to 1.0.16 update, not the firmware itself. I tried all of them though (better safe than sorry), but nothing seems to be working.
I think I found a 1.0.11 firmware but it requires the phone to be connected to the pc and seeing I can't make my pc to acknowledge the phone, that's not doing much for me. A kitkat version [for which is said that could be applied to my phone] isn't working either (installation just aborts).
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck