[Completed] Tablet freezes and cpu heats up at lock screen (Gigaset QV1030) - XDA Assist

I just bought Gigaset QV1030 from the internet (i was aware of the issues but i hoped that a reset might help). So the tablet boots (fast) until the lock screen , there it works 4-5 seconds and freezes (only holding the reset button helps to shut it down) , also it overheats without reason.
I don't know if an app is causing it , so i hope a reset and software update might help , but i can not acces the recovery ( i tried power and + , also allot of other combinations , nothing works , it either doesn't turn on , or turn's on without recovery)
I also don't know if fastboot and usb debbuging are checked.
Is there any way to flash a recovery , or make a bootable flash drive with a recovery? Or somfthing else? I'm not very good at rooting , i know only the basics...
The PC sees the tablet , installs drivers , but CMD can not see and adb devices (probably usb debbuging unchecked?)

Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Related

[Completed] [Q] CAT B15 hard brick or soft brick, not have access to download mode

I have a smartphone CAT B15, was very slow despite making several vecez the restore factory settings.
Use the program MTK Droid Root & Tools v2.5.3, I made a backup of the recovery, change boot and recovery for a smart phone that I found on the internet, but restart the smart phone on and off, just go to recovery and when renicio from recovery restarts and infinitely again, I have to get the battery to stop rebooting, when I try to enter download mode the computer reconose smart phone one desconcta seconds and then just goes off and is charging the battery.
remove the battery, I press the volume up key and connect the smartphone to the computer connects and disconnects a few seconds.
Replace cable with an original and neither worked.
¿I can retrieve the boot from the recovery through a package update.zip?
before this happens try to install an update from the recovery to come down from the search for updates android but I could not install.
excuse me for my english but I'm Colombian and I speak English.
Thank you for your prompt response.
Hi,
Here's a good thread on your device that you can read through or ask for help,
> Android Development and Hacking > Android General > [Guide] All about Caterpillar B15 (CAT Compal B15)
If that doesn't help you, you can ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.

[Completed] Overmax Quattor10+ brick

Hello. I have problem tablet Overmax Quattor 10+ (my friend give it to me, becouse she pushed too hard power on button, so I had to open tablet and repair it by home-made solution). Everything gone perfect, tablet went on to the PIN screen. I asked her if she know it, but she said that the tablet hadn't any PIN secure. I was searching a lot how to crack PIN (not for SIMcard, just Android secure), but I didnt find anything so I started to install software again. I downloaded everything from here : overmax site. After download I pressed HomeButton connected to PC, program has found the device and asked me to format or not device. I pressed yes, the formatting went to 4% and device has disconnected (I didnt touch the USB cable or something). After this tablet couldn't boot (nothing show on screen), when I try again to format it, the program show info, that the Tablet or system image is incorrect. Windows detect the device in Device Manager. Anyone have solution for this?
Thank you in advice. Greetings.
Hi,
I'm sorry but I don't find anything related to your device, so you must start asking in one of this Q&A forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
or
> General discussion > Questions and Answers
Good luck
Thread closed, thank you.

[Completed] [Q] Toto tv netbook wont enter recovery mode

Mt Toto tv lap one netbook boots to the Toto icon with the message: Boot into recovery mode. I forgot the password so I used Android Device Manager to wipe and reset to factory defaults. Now I'm stuck at the icon screen. I tried the recommended procedure to boot into recovery mode: Press reset button, unplug power cord, continue pressing reset button and replug power cord. Nothing changes. In the comments section of the one blog with the reset procedure. a lot of people wrote in that the procedure didn't work. No one has replied with another option. The netbook is a year old and worked fine, as I wrote, I just forgot the password. The problem, as I see it, is: I need to find a way to discover the proper procedure to boot into recovery mode or perhaps there is some software out there that would let me reinstall the os. I'm open to any suggestions. I appreciate you taking the time to read this and for any advice you may have. Thank you.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Thread closed, thank you.

[Completed] Bootloop on RK3066 tablet

(I'm not sure where I should put this thread, and this section seemed to be the most apropriate. If it is not, sorry)
Hey.
So, I had a tablet I weren''t using. It is a Sunstech Tab7Dual, with RK3066.
I tried to turn it on, to give it to my father, who needs it. When I did, the tablet went on a bootloop. It turns on, then shows the brand's logo, and then the boot animation, and just repeats the boot animation forever. I noticed that when the device's battery is about to run out, it initiates the tablet for a half of a second.
I didn't have anything special that might mess with the system on it, just Mounts2SD and root. And I can't access recovery on this tablet (I don't have a Custom Recovery).
My PC seems to detect the device, but doesn't recognize it.
I tried SD Firmware Tool and had no success. Also had no success with RKBatchtool, that only displays a pink square instead of a green one.
What can I do?
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] [Q] I think i hardbricked my Phicomm i813... any help?

As the topic said,
I accidentally format the bootloader (its a 8KB partition that asked for format before you can use it that pop up during rooting process)
The moment i hit the format button, my phone goes for a quick vibrates and died. No power, no recovery/diagnosis mode, wont charge, pc goes error on driver while connected with the phone. Tried taking the battery out and hold the power button, leave it there for 2 days, tried any other stuff. It just wont flinch.
Is the phone hardbricked? Or is the battery faults? Is there a chance that the recovery can be made just to make my phone alive again? It was hard for me to find as this phone is kinda underground brand. Any help would be appreciated. Thanks!
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread where you can ask: [Q] Phicomm FWS 710 Pro stuck before boot animation
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Categories

Resources