Q&A for [WIP]CyanogenMod 12.1 for Xiaomi Mi 4i
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [WIP]CyanogenMod 12.1 for Xiaomi Mi 4i. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
DELETE
Hi guys, may be my question is oftop, but
What about dual boot for mi4i as like mi pad, it would be perfect for testing goals and safe for regular users ?
Can't flash the build on my mi4i
Hi guys, is anyone facing the same issue? I have rooted and flazhed TWRP using the tool provided on forum but when it comes to flashing the CM build on my device it doesn't recognize it and says my device is TCL_m3g , which TWRP version do you use? Thanks for the help
bicks13 said:
Hi guys, is anyone facing the same issue? I have rooted and flazhed TWRP using the tool provided on forum but when it comes to flashing the CM build on my device it doesn't recognize it and says my device is TCL_m3g , which TWRP version do you use? Thanks for the help
Click to expand...
Click to collapse
It happened to me too
Don't worry there's a solution. You might have used mi4i toolkit v3 for rooting.
But when I tried the updated toolkit that is V4 from MIUI forums.
Link:
https://drive.google.com/file/d/0B0pkb-PnDIp8cTc4NENOODFRazA/view
Flash TWRP again and you are good to go
time for for some CM12.1 beta testing`
works like a charm with mi4i tools v4, now time for the serious stuff! thanks for the help
Exchange email encryption fails
Guys, first the rom fees great for a WIP! Seems everything works as expected for me but can't find a way to add my exchange account to the email app, I tried even to encrypt the device and see if it would work but nothing, also downloaded a zip file another device forum to bypass exchange security. Nothing works, any help? Thanks guys! Julien
bicks13 said:
Guys, first the rom fees great for a WIP! Seems everything works as expected for me but can't find a way to add my exchange account to the email app, I tried even to encrypt the device and see if it would work but nothing, also downloaded a zip file another device forum to bypass exchange security. Nothing works, any help? Thanks guys! Julien
Click to expand...
Click to collapse
exchange support is quite incomplete in cm 12.1
that should get rectified in near future by cm team itself
Patch Sensors
Flash Patch-sensors.zip with TWRP
Then, factory reset needed.
after the first boot, change the lockscreen into a pattern mode to cope with SoD
Find bug : Animation off charging
( i can't speak English ) hahahaa
Error
I am trying to flash the cm12 build using TWRP however I am getting an error message - "error executing updater binary in zip" This package is for device: ferrari; this device is TCL_M3G
However this a Mi4i. What could be the problem? Has the device name changed over updates?
Please help.
SharekhaN said:
I am trying to flash the cm12 build using TWRP however I am getting an error message - "error executing updater binary in zip" This package is for device: ferrari; this device is TCL_M3G
However this a Mi4i. What could be the problem? Has the device name changed over updates?
Please help.
Click to expand...
Click to collapse
Check my post above.. About toolkit v4
Tried that and failed
So here is the deal. i did see that post and tried to flash twrp which is in v4.
It shows successful and reboots but i still get in to the normal MI recovery. Dont know whats going wrong here.
Finally proud to say I'm a 4i owner. It runs way smoother than MIUI. Sweet. ^^ Thanks for all the hard work.
Can i flash it.........
is it fully working..???? sensors are working or not...???? please help...................
I would like to have the init.qcom.post_boot.sh
Pls someone upload. Thx [emoji4]
Sent from my Mi 4i using Tapatalk
Shubhadeep Chowdhury said:
is it fully working..???? sensors are working or not...???? please help...................
Click to expand...
Click to collapse
its working aftr flashing patch zip
Sent from my Mi 4i using XDA Free mobile app
chongns said:
I would like to have the init.qcom.post_boot.sh
Pls someone upload. Thx [emoji4]
Sent from my Mi 4i using Tapatalk
Click to expand...
Click to collapse
here is your file
Dt2w
Please enable this feature as well. ->to all the devs
Can someone provide me zip file of gapps?
Sent from my Mi 4i using Tapatalk
Related
Q&A for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][n80xx][Samsung JB] Boeffla-Kernel 2.5 stable (03-09-2014). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lord Boeffla said:
Hi all,
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
Update zzmoove to version 1.0-beta1 (credits to ZaneZam)
Update exFat driver to 1.2.9
Update the flash binary in the boeffla-kernel-reset recovery script, bump to version 3.1
Enjoy
Andi
Click to expand...
Click to collapse
It sjust awesome
help to find kernel n8013
Someone.. anyone.. where can i find this kernel ? a download link would great.. thanks in advance..
3.0-beta3 is now ready for you (both n8000 and n801x variants).
Change log is the same for both kernels.
Version 3.0-beta3
22.10.2014
As always... Read the op.
Then you will see everything is here:
www.boeffla-kernel.de
Andi
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Araragi said:
hello I'm New On Android, I want to ask regarding flashing the kernel ...
Do I need to run Kernel cleaning Script Afterflashing the kernel? Thanks
Sent from my GT-N8000 using Tapatalk
Click to expand...
Click to collapse
Hm... are you talking about leaving Boeffla-Kernel or moving to Boeffla-Kernel?
If you leave Boeffla-Kernel, you do not need to use any cleaner script. Boeffla stores everything under /data/.boeffla, and this cannot be used by any other kernels.
If you move to Boeffla, also usually no cleaning before required.
Only exception: If you were on a kernel before that stored all his configuration into init.d scripts, then you should cleanup your /system/etc/init.d folder before flashing Boeffla.
That's all however.
Andi
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
w_ayon said:
Where can I find ur beta version of the kernal and how can I flash it...im using gnabo rom..could u plz guide me through
Click to expand...
Click to collapse
All you need is on the homepage, as stated in the OP of all kernel threads.
www.boeffla-kernel.de
Andi
ALL: Google is again playing games and locked down the first of my 3 donation apps in Playstore. Of course no compelling reason provided.
But as I already prepared for that half a year ago, I would like to remind you to use your personal unlock key to gain donation functionalities.
If you have not yet generated (this can be done in the donation app itself) and entered it into Boeffla-Config, it is now urgent to do that!!!
I cannot ensure Google will not lock down the other two donation apps as well soon, so you should be prepared now.
From my side, next Boeffla-Config app version will not support these donation apps anymore but only personal unlock codes.
Also, I will replace remaining donation apps in Playstore very soon (today or tomorrow) with a dummy app that tell users to get in touch with me manually.
Thanks for understanding... and alohas Google, all done wrong, guys there.
Cheers
Andi
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
sarvar97 said:
Hi all. I have a gnabo rom v7 on my n8000. Can I install this kernel to my device? Android version is 4. 4. 2. Thanks beforehand.
Click to expand...
Click to collapse
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Lord Boeffla said:
Absolutely, take latest 3.0-beta version for your device (n8000, not the n801x version).
Andi
Click to expand...
Click to collapse
Thanks a lot, the kernel is fantastic.
Hi from Russia. Excellent operation! I tried to pay, but my payment system of it doesn't allow to make. Sorry. The kernel for N8000beta5 isn't set through TWRP2.8.3.0 "error bynary". I set through Odin. Everything is great. Good luck!
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Lord Boeffla said:
And you can also use Boeffla-Config app to flash kernel updates now.
Surprised twrp throwing an error, s3 and opo kernels flash fine with twrp. But I only report what others say, I never use twrp. I am a philz touch guy...
Andi
Click to expand...
Click to collapse
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
But this is unexplainable then... the flash binary has not changed for more than half a year.
However I got to know in the OnePlus One thread, TWRP seems to have introduced some issues lately. But never used TWRP myself, so it is just second hand information I have seen.
Andi
Guroff1974 said:
OK! I set Philz v6.48.4. The kernel of beta5 was normally stitched. Last versions of kernels were normally sewed on TWRP. Thanks! Good luck!
Click to expand...
Click to collapse
Ah, but can be something else.
In order to avoid people are flashing wrong kernels, I put asserts in.
Could you please just boot your tablet and look in /system/build.prop file what the entries are there for:
ro.build.product
ro.build.model
ro.build.device
Many thanks
Andi
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Lord Boeffla said:
Ok, for the time being I uploaded the kernels again without the assert checks.
So be careful to not flash the kernel on a different device than the Tab10.2
Please redownload the zip again, it should work now also in TWRP.
Thanks
Andi
Click to expand...
Click to collapse
I redownload N8000beta5 of 31.01.2015. Now everything is good. The kernel is set through TWRP and Philz. Gnabo v8 firmware. Thanks! Good luck!
problem with boeffla kernel v3 beta 6 for samsung note 10.1 (n801x)
Hi ! I am using the samsung kitkat stock rom 4.4.2 rooted in a samsung galaxy note 10.1 (n8010). First time trying a kernel. I have tried to install the boeffla kernel mentioned in the title, both via odin and trwp, but i have the same problem once installed... when rebooting the tablet it just stays in a black display after the "samsung galaxy note 10.1" title. It just does not start, i have to boot in download mode and reinstall the stock rom via odin. Help please! I would like to try this kernel in my tablet ! Thanks!
[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Q&A for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i need help
Az-one786 said:
here you go... http://forum.xda-developers.com/showthread.php?t=2397942
you can choose between micro/nano/pico
Click to expand...
Click to collapse
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
mohammad jarrah said:
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
Click to expand...
Click to collapse
I think u should put your questions here http://forum.xda-developers.com/showthread.php?t=1877166
This topic is only for LiquidSmooth questions
About your question: Install BMM and do partition stuffs then you will be able to install 4 more custom ROMs on your phone :fingers-crossed:
But first, read this great tutorial (including videos)
http://forum.xda-developers.com/showthread.php?t=2602229
System 6 Error when loading Nano/mini Gapps on LS v32 Atrix2
I got brave today, after much reading on the forums and watching Tech ArnY rooting videos and BMM 0.3.4 - Great information.
Here are the steps that I took today and their results:
1.) Rooted the Atrix 2 MB865 (AT&T) that has OTA ICS 4.0.4 ROM. Rooting was successful,
2.) Post install of MBB 0.3.4 and SuperUser, I kept the ICS 4.0.4 ROM on System 1 of the phone.
3.) Next, following Tech Arn Y's teaching, I was able to successfully flash LiquidSmooth (AcePort-LS-KK-Milestone-3.2-edison.zip) onto System 3 post wipe clean /dalvik, et cetera and successful install.
4.) So far, so good. Next I attempted to load GAPPS from this link (http://forum.xda-developers.com/showthread.php?t=2397942). Again, post check of MD5 check sum for both mini and nano GAPPS - no issues.
5.) While attempting to flash either the mini or nano GAPPS onto the Atrix 2 into System 3, it shows the following (E: Error in /ext/pa_gapps-modular-nano-4.4.4-20141121-signed.zip) (Status 6) Installation aborted.
6.) I can boot into either ROM without issues, however, even after a reflash of System 3 and again successful install of LS-KK-Miestone 3.2, GAPPS gives Status 6 install error.
Looking for clues in these forums, but I have not come across anything yet. Any/all help would be very much appreciated!
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
1BadWolf said:
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
Click to expand...
Click to collapse
Thanks 1BadWolf for the reply. At first, I thought that the size of the GAPPS was perhaps the issue, but it did not end up to be the case. After continuing my search in XDA Forums (a wealth of great information here without doubt!), I stumbled upon a video that explained Status 6 and Status 7 errors which are the most common when flashing GAPPS post ROM into any phone. In my case, here is the summary of the events:
1.) Flashed pa-gapps mini 4.4.4 (at 229 mbytes ) - Status 6 error.
2.) Wipe clean System 3 and then flashed pa-gapps-nano 4.4.4 (at 120 mbytes) 2x - Status 6 error.
3.) Being somewhat frustrated, and yet challenged, I took the clue for the status 6 error and by chance, I grabbed the Slim_mini-gapps 4.4.4 (at 65 mybtes) - Gapps successfully loaded!
4.) Wanting to confirm whether the issue lives in the size of the GAPPS - or - something in one of the scripts (Meta-INF > com > google > android > update-binary or update-script), I went ahead and did another Wipe-Clean and flashed Slim-normal-gapps 4.4.4 (at 183 mbytes) - Gapps successfully loaded
Summary: In business and in life, something a solution or a work-around is found and implemented without knowing the root cause!
Hopefully, the documenting of my journey here will be beneficial to someone down the road just as many of the posting in this forum have been (and continue to be) to me too!
I have installed this ROM on my Atrix 2.. Stable rom as mentioned.I just found one bug,i.e The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Expecting a hope..
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
_partha_ said:
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Click to expand...
Click to collapse
parthapmc said:
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
Click to expand...
Click to collapse
Hey guys, thanks for trying out my Liquidsmooth port and offering your feedback. Unfortunately, I'm no longer able to work on the existing ports or even lollipop since development has completely died down.
This is because our current recovery, BMM isn't able to boot any lollipop rom and it's the only working one we have. All developers and supporters have moved on pretty much, so all you can do is just play around with what's there. I'm still kinda around with my A2, but don't have the time to do anything anymore since I've moved onto a newer device, work, life, etc.
If you want someone to blame for this, firstly blame Motorola for the locked bootloader and then blame Google for making 5.0 have enforced SELinux which is why we can't boot any LP rom. Aside from that, this device is amazing to have and I hope you all have a wonderful time with it.
Sent from the Ace's MB865 using Tapatalk
Q&A for [ROM] MIUI V5 Multilang [H60-L04]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] MIUI V5 Multilang [H60-L04]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How to remove Chinese characters
kishoredroid said:
MIUI V5 - Honor 6 H60-L04
Found this while browsing. Running smooth for over a day on my L04. All features working flawless. The ROM is so fluid and responsive.
All credits to "Jacketti", who shared this.
View attachment 3296257 View attachment 3296258 View attachment 3296260 View attachment 3296259 View attachment 3296261
DownloadROM - http://bit.ly/1JM8mnlGapps - http://bit.ly/1zt4STc or your favourite Gapps.
As always I am not responsible for anything, or every this and that happens to your device, or you! Flash at your own risk!!
Flashing Instructions1. You need unlocked bootloader
2. CWM Recovery
3. Wipe - Data, System, Cache, Dalvik
4. Flash ROM zip
5. Flash Gapps
6. In mounts and storage - "Format /data and /data/media"
7. Reboot
Working
All
Bugs
None so far. Report if you come across.
Click to expand...
Click to collapse
How to remove Chinese characters, Its Very Annoying ??
Someone could upload it to MEGA?
Thanks.
Someone could upload it to MEGA?
Thanks.
Hi there, thanks for sharing this ROM.
I noticed that some of the german translations doesn't work.
Is there maybe a german language pack, like for the italian language?
Thanks.
This account's public links are generating too much traffic and have been temporarily disabled!
can you upload to mediafire?
Dropbox Error 429
Hey can you please upload the ROM somewhere else, the dropbox link isn't working any more. Thanks in advance.
Sorry, I was off for sometime. Will upload by EOD.
Work or no work ???
This ROM fit the model of Honor 6 H60-L02 dual-SIM version ?
aleksgiab said:
Work or no work ???
This ROM fit the model of Honor 6 H60-L02 dual-SIM version ?
Click to expand...
Click to collapse
I believe H60-L02 works fine
Dropbox cant download, too much traffic
can you post the link on another filehost ? I cant download from dropbox, it says it generate too much traffic .
Thanks
Thank you, it works very well! Some issue are present though
1. Overheating. It heats during simple actions a lot, basically most time i use the phone it's quite hot.
2. GPS. I tried many solutions to make it work, but still. It loses satellites constantly, and gps cold start is few minutes (5-8 secs on stock for me)
3. A little issue with navbar. It is absent on lockscreen and you see part of homescreen wallpaper on its place.
Anyway great work
my phone seems to be stuck in a boot loop. please help?
how to flash MIUI V6 in honor 6 h60-l04!
Hi,
Please tell me how to flash MIUI v6 in my honor 6 h60-l04.
I have tried it from here but end up with boot loop.
Now i have flashed EMUI v3.0, but i want to flash MIUI v6.
pLz help me!
Regards,
Biswajit
Q&A for [ROM] Huawei Honor6 MIUI6 Release [Update 5.5.17]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Huawei Honor6 MIUI6 Release [Update 5.5.17]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Tabo8226 said:
ON h60-l04 it will work on B390?
So I need to flash B390 and then this patch yes?
OR i can just install this and that's all? ^^
Click to expand...
Click to collapse
nicholadia said:
No H60-L12 based on EmotionUI 3.0? Please let me know for me to try this ROM....thanks so much.
Click to expand...
Click to collapse
yes, you must go on B390 and then flash this rom!
it is most beautiful rom :fingers-crossed:
Can this be installed on b380? Also screen saver feature present?
Sent from my H60-L04
How do I get the play store working?
edit: flashing gapps helped
Modem of H60-L04
Good day!I have the same problem with the firmware (tried all versions), always error com.android.phone !!! The modem version of the same...
obninsk said:
Good day!I have the same problem with the firmware (tried all versions), always error com.android.phone !!! The modem version of the same...
Click to expand...
Click to collapse
Same problem: baseband 21.223.00.00.031
Hi,
I can't install any apk, from the google play neither, it says that I have no abaliable space when I have 12 gb free.
Can anyone solve this problem? thanks, im using Cm11 version on L02.
Sorry for my bad english.
MIUI 6 for Huawei Honor 6 Author: Ry09iu
I want to ask about problem com.android.phone. Because this is really very interesting bug. I want to know if it is carrier problem, then why I didn't meet this problem on some MIUI firmwares for H60-L02 ?? Like Miui 5.4.3 and Miui 5.6.13 ? But many users from 4pda tell that there is no MIUI version based on official firmware which haven't this problem. I will very happy if Ry09iu can correct this trouble. We can take a log for help. Thank you very much Ry09iu for this great work!
Q&A for (news) Xiaomi Released Kernel Source for Mi 4i
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (news) Xiaomi Released Kernel Source for Mi 4i. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
custom rom
when is the custom rom coming out? please bring it out soon..
somnath390 said:
when is the custom rom coming out? please bring it out soon..
Click to expand...
Click to collapse
Comming... . soooon.......
nice to see some development has going on!
I'm maman_ on the xiaomi forums, and I'm planning to compile aosp 5.1.1 or 5.0.2 for the Mi 4i. Any help will be very appreciated
currently I had downloaded the android sources, and cloning the kernel source to the `devices` folder. If I'm not wrong, the next step is constructing the device tree for mi4i. any pointers?
also seems that xda user dh.harald has been succesfully integrate the wifi drivers into the kernel, which is a good news.
also new thread in the development thread will be good too
Waiting fo relase its will be awesome
thanks for u r work
Thanks
Thanks for giving ur time highly obliged
CM
Now that a few people are trying to port CM to the Mi4i, I wonder what it takes that it will be officially "supported" by CM?
can i request for official support form custom recoveries like TWRP 1st instead of jumping to custom rom development??
wolkenjaeger said:
Now that a few people are trying to port CM to the Mi4i, I wonder what it takes that it will be officially "supported" by CM?
Click to expand...
Click to collapse
i dont think cm will officially support this device so sson...we need to fix everything to get official support.
k2wl said:
i dont think cm will officially support this device so sson...we need to fix everything to get official support.
Click to expand...
Click to collapse
I understand, but if everything works, how is the process to have it officially supported?