Database Info

[Q&A] [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]

Q&A for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

bootloop problem after flash the kernel
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?

Curiosity
This is the only android based rom that works on my hardware bricked Nexus 5 (moisture maybe); Sailfish, B2G and Ubuntu Touch works too, but the stock rom and other android based roms screen locks as soon configuration starts (usually touching in "next" after selecting language). I sense that porting the FLymeOS's app settings/configuration could reach any other rom run or something... Any ideas?
Thanks in advance, and sorry for my poor english

M_Nexus5 said:
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Click to expand...
Click to collapse
You should use ElementalX CM version

Vpabc said:
You should use ElementalX CM version
Click to expand...
Click to collapse
Yes that is what I used, I download it from the this thread so shoud is for CM
And also I tried with the new version 1.12, I download it from ElementalX page, the link was under the CM section ! But same problem, my device go into bootloop !
I have other question please, I changed the dpi of play store to 480 by using the Xposed module, but still I can't get some of Apps when I use the search box of play store !
Shoud change the whole dpi of system & applications or need to change another google app to solve this problem ?!
Thaaanks for helping

This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem

Vpabc said:
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Click to expand...
Click to collapse
thanks, we are waiting for the next version

is there update in the soon
or developers left him ...

Flyme OS not working on my Nexus 5
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!

sp268_simple said:
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
Click to expand...
Click to collapse
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps

ferozzzz said:
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
Click to expand...
Click to collapse
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...

sp268_simple said:
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
Click to expand...
Click to collapse
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)

ferozzzz said:
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
Click to expand...
Click to collapse
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..

When update to flyme4

Problems with immersive mode on fullscreen games
Hi. I flashed Flyme OS a couple of days ago, and I have to say I am loving every single moment of this. Love the interface, love the speed and even the battery life is pretty impressive compared some other ROMS!
Although, I have been experiencing an extremely annoying bug with fullscreen games. I play COC on my phone on a daily basis and when I open the game, the onscreen buttons (Back, Home and Recent) buttons don't disappear like they are supposed to on android 4.4. They stay fixed and visible.
Now, I normally wouldn't mind this, if the full game interface is visible. The problem is that the onscreen buttons are fixed on top of the game, which means that part of the screen is hidden behind the buttons. It is really difficult. I tried a couple of stuff I found on google to fix it.
The only thing I found closest to a fix is to disable the whole onscreen buttons thingy by setting the value of "mu.hw.mainkeys" to "1" in "build.prop" file. Then I installed the "PIE CONTROL" app by "coolace" from the Playstore. It have been working really well for now. But, since it includes installing an external app, which takes up more memory to run I was hoping you guys could look into this and suggest a way to fix this. I like to keep my device clean without installing too much extra applications!
Other than this little problem, I find this as a very top notch ROM. Good work to the developers. Keep it coming
Hope to hear from you guys, and I look forward to newer versions of this ROM, especially one ported with the latest Lollipop release!
Thank You.
---------- Post added at 03:14 PM ---------- Previous post was at 03:06 PM ----------
sp268_simple said:
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
Click to expand...
Click to collapse
I had this problem at the beginning too. But, I downloaded the latest PA Gapps pack and installed it. Worked like a charm after that!
Here is the download link:
http://d-h.st/qOq
This is the PICO package, which means that it will only install the most basic gapps like playstore and play services that you absolutely need to run the system properly! You will have to download the other apps like Gmail and Hangouts from paystore.

Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle

JalmiNyondong1933 said:
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
Click to expand...
Click to collapse
Yes. I installed after lollipop update. Got that error in the first try too!
When flashing the lollipop update, you flashed the hhz12d bootloader. All you have to do is flash the hhz11k bootloader using fastboot. Worked for me after that.
Here is the link where I downloaded hhz11k bootloader:
http://downloadandroidrom.com/file/Nexus5/bootloader/bootloader-hammerhead-hhz11k.zip
:good:

he means cm11. Its work, really, writen now, from flyme, with stock 5.0 and multirom

[EDIT: MY PREVIOUS QUESTION WAS ALREADY ANSWERED] [IGNORE THE ATTACHED IMAGE]
hi my friends! I have 2 questions:
1. I can't make the app "operadora ddd" work with this rom for some reason.
2. Fullscreen mode is definitely broken
Is it normal?

very good
today I used it very good..

[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014

[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Q&A for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

i need help
Az-one786 said:
here you go... http://forum.xda-developers.com/showthread.php?t=2397942
you can choose between micro/nano/pico
Click to expand...
Click to collapse
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(

mohammad jarrah said:
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
Click to expand...
Click to collapse
I think u should put your questions here http://forum.xda-developers.com/showthread.php?t=1877166
This topic is only for LiquidSmooth questions
About your question: Install BMM and do partition stuffs then you will be able to install 4 more custom ROMs on your phone :fingers-crossed:
But first, read this great tutorial (including videos)
http://forum.xda-developers.com/showthread.php?t=2602229

System 6 Error when loading Nano/mini Gapps on LS v32 Atrix2
I got brave today, after much reading on the forums and watching Tech ArnY rooting videos and BMM 0.3.4 - Great information.
Here are the steps that I took today and their results:
1.) Rooted the Atrix 2 MB865 (AT&T) that has OTA ICS 4.0.4 ROM. Rooting was successful,
2.) Post install of MBB 0.3.4 and SuperUser, I kept the ICS 4.0.4 ROM on System 1 of the phone.
3.) Next, following Tech Arn Y's teaching, I was able to successfully flash LiquidSmooth (AcePort-LS-KK-Milestone-3.2-edison.zip) onto System 3 post wipe clean /dalvik, et cetera and successful install.
4.) So far, so good. Next I attempted to load GAPPS from this link (http://forum.xda-developers.com/showthread.php?t=2397942). Again, post check of MD5 check sum for both mini and nano GAPPS - no issues.
5.) While attempting to flash either the mini or nano GAPPS onto the Atrix 2 into System 3, it shows the following (E: Error in /ext/pa_gapps-modular-nano-4.4.4-20141121-signed.zip) (Status 6) Installation aborted.
6.) I can boot into either ROM without issues, however, even after a reflash of System 3 and again successful install of LS-KK-Miestone 3.2, GAPPS gives Status 6 install error.
Looking for clues in these forums, but I have not come across anything yet. Any/all help would be very much appreciated!

@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.

1BadWolf said:
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
Click to expand...
Click to collapse
Thanks 1BadWolf for the reply. At first, I thought that the size of the GAPPS was perhaps the issue, but it did not end up to be the case. After continuing my search in XDA Forums (a wealth of great information here without doubt!), I stumbled upon a video that explained Status 6 and Status 7 errors which are the most common when flashing GAPPS post ROM into any phone. In my case, here is the summary of the events:
1.) Flashed pa-gapps mini 4.4.4 (at 229 mbytes ) - Status 6 error.
2.) Wipe clean System 3 and then flashed pa-gapps-nano 4.4.4 (at 120 mbytes) 2x - Status 6 error.
3.) Being somewhat frustrated, and yet challenged, I took the clue for the status 6 error and by chance, I grabbed the Slim_mini-gapps 4.4.4 (at 65 mybtes) - Gapps successfully loaded!
4.) Wanting to confirm whether the issue lives in the size of the GAPPS - or - something in one of the scripts (Meta-INF > com > google > android > update-binary or update-script), I went ahead and did another Wipe-Clean and flashed Slim-normal-gapps 4.4.4 (at 183 mbytes) - Gapps successfully loaded
Summary: In business and in life, something a solution or a work-around is found and implemented without knowing the root cause!
Hopefully, the documenting of my journey here will be beneficial to someone down the road just as many of the posting in this forum have been (and continue to be) to me too!

I have installed this ROM on my Atrix 2.. Stable rom as mentioned.I just found one bug,i.e The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.

I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.

Expecting a hope..
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?

_partha_ said:
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Click to expand...
Click to collapse
parthapmc said:
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
Click to expand...
Click to collapse
Hey guys, thanks for trying out my Liquidsmooth port and offering your feedback. Unfortunately, I'm no longer able to work on the existing ports or even lollipop since development has completely died down.
This is because our current recovery, BMM isn't able to boot any lollipop rom and it's the only working one we have. All developers and supporters have moved on pretty much, so all you can do is just play around with what's there. I'm still kinda around with my A2, but don't have the time to do anything anymore since I've moved onto a newer device, work, life, etc.
If you want someone to blame for this, firstly blame Motorola for the locked bootloader and then blame Google for making 5.0 have enforced SELinux which is why we can't boot any LP rom. Aside from that, this device is amazing to have and I hope you all have a wonderful time with it.
Sent from the Ace's MB865 using Tapatalk

[Q&A] [ROM MIUI KK v6] - sMIUI 5.1.2 <<< AROMA,initd,tdb,multilang,zipalign,cpuTweak

[Q&A] [ROM MIUI KK v6] - sMIUI 5.1.2 <<< AROMA,initd,tdb,multilang,zipalign,cpuTweak
Q&A for [ROM MIUI KK v6] - sMIUI 5.1.2 <<< AROMA,initd,tdb,multilang,zipalign,cpuTweaks >>>
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM MIUI KK v6] - sMIUI 5.1.2 <<< AROMA,initd,tdb,multilang,zipalign,cpuTweaks >>>. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

You use which theme in the screenshots ?

What is different between Miui Polska and sMiUi

Bug
Hi!
The camera app isn't working for me in v 5.1.23.
Any solution?
Thx

Notifications delay
In this rom there are problems of delay in notifications as in the stock , whatsapp messenger etc....?? Thanks for the work

sMiui 5.3.6
I,ve installed the rom on xiaomi mi4 and there some random reboots during the day.....I installed by clean installation after full wipe e reset

what trickery is this ?
after i installed any updates post 27 one on smiui . the system randomly reboots /? any solution to this > bitti ?

great ROM
I will try tonight

Awesome Rom
Awesome Custom rom for MI4..After updating latest build of 31.07.2015 getting Browser FC...

I cannot update to the latest 6.1.28 version through Update app and got the message like on the attached screenshot. And also I've tried it also on recovery mode and got the same result.
I think I've downloaded a corrupted file. But I've downloaded it for like 5 times normally without any network interruption through both PC or Android.
Can anybody tell me what is going on and how to solve it? Thank you

[Q&A] [ROM] Huawei Honor6 MIUI6 Release [Update 5.5.17]

Q&A for [ROM] Huawei Honor6 MIUI6 Release [Update 5.5.17]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Huawei Honor6 MIUI6 Release [Update 5.5.17]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Tabo8226 said:
ON h60-l04 it will work on B390?
So I need to flash B390 and then this patch yes?
OR i can just install this and that's all? ^^
Click to expand...
Click to collapse
nicholadia said:
No H60-L12 based on EmotionUI 3.0? Please let me know for me to try this ROM....thanks so much.
Click to expand...
Click to collapse
yes, you must go on B390 and then flash this rom!
it is most beautiful rom :fingers-crossed:

Can this be installed on b380? Also screen saver feature present?
Sent from my H60-L04

How do I get the play store working?
edit: flashing gapps helped

Modem of H60-L04
Good day!I have the same problem with the firmware (tried all versions), always error com.android.phone !!! The modem version of the same...

obninsk said:
Good day!I have the same problem with the firmware (tried all versions), always error com.android.phone !!! The modem version of the same...
Click to expand...
Click to collapse
Same problem: baseband 21.223.00.00.031

Hi,
I can't install any apk, from the google play neither, it says that I have no abaliable space when I have 12 gb free.
Can anyone solve this problem? thanks, im using Cm11 version on L02.
Sorry for my bad english.

MIUI 6 for Huawei Honor 6 Author: Ry09iu
I want to ask about problem com.android.phone. Because this is really very interesting bug. I want to know if it is carrier problem, then why I didn't meet this problem on some MIUI firmwares for H60-L02 ?? Like Miui 5.4.3 and Miui 5.6.13 ? But many users from 4pda tell that there is no MIUI version based on official firmware which haven't this problem. I will very happy if Ry09iu can correct this trouble. We can take a log for help. Thank you very much Ry09iu for this great work!

[Q&A] [PATCHROM] Miui v6 for GT-i9105/P

Q&A for [PATCHROM] Miui v6 for GT-i9105/P
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PATCHROM] Miui v6 for GT-i9105/P. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

not Import/Export contacts to the SIM-card&Show SIM contacts.
---------- Post added at 09:27 AM ---------- Previous post was at 08:54 AM ----------
not Import/Export contacts to the SIM-card&Show SIM contacts.

BUG
not accept to 64GB flash card , do not connect , offers formatirovaniya.Ispravit this bug

помогите
As ispravte bug flesch card to 64GB , firmware Accepted formatirovat.kakie it offers suggestions?

fdn mode not working!

Great.... thanks

Great rom
I used the rom few days on i9105 and it's awesome. Fast and less battery consuming. Nice features. Every thing is OK. some time force stops but overall the best rom. The few bugs in my device are
App store sub languages are not in English
Vedio not working
Titanium Back Up and xposed are yet to work.
Hands up for the hard work.
Thanks

Good job!
Best ROM I've seen. Amazing ram usage, no lags, beatiful ui. Thanks a lot!

how i do flash a new update plz?

Amr fego said:
how i do flash a new update plz?
Click to expand...
Click to collapse
As usual
1. Wipe data
2.Flash Rom & Gapps
3.Wipe data
4.Reboot system

Launcher bug?
Can't use other launcher as default. Any suggestions?
BTW great rom, i'm waiting for update cuz there are some annoying bugs. Miui rullz

Any News Update ?

Problem with selection network type
Hi @haky86 thnk for good work.. i want to tell you that there is a problem with network type selection. if i select 2g as network i can't change it . i've tried all but is impossible to resolve problem on the device...

Hi @haky86 good work!
1)But in status bar there are any toggle like miui v5
2)When change font it not change
3)Why there isn't android lollipop?
(Sorry for my english)
Tks!

i can't change Network type from 2G to 3G, Please Fix it

wsm/xposed problem on rom
I have a problem with Wsm tool and Wposed framework. When i install it and reboot the device i got a bootloop does anybody know how to solve it?

I have a problem with Wsm tool and Wposed framework. When i install it and reboot the device i got a bootloop how to solve it?