Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
bajki_ktm said:
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
Click to expand...
Click to collapse
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
cakrabayu said:
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
Click to expand...
Click to collapse
I don't have installed KIES..
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
cakrabayu said:
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
Click to expand...
Click to collapse
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
bajki_ktm said:
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
Click to expand...
Click to collapse
Really sad about your problem bro.... something wrong with the procedure or your firmware.. there are many cases like you.. you can refer to :
http://androidforums.com/samsung-ga...help-firmware-flashing-failed-using-odin.html
http://forum.xda-developers.com/showthread.php?t=1877308&page=2
http://forum.xda-developers.com/showthread.php?t=1984717
http://forums.whirlpool.net.au/archive/1919243
but it is up to you to give it a try. Luckily for me, I did not encounter the same problem like yours while flashing with pc odin. I prefer using mobile odin. it is safe and easy. Good luck bro...
I am having the same issue on my P6810 (16gb). I cannot use the emergency recovery in Kies because I don't have the recovery code that it asks for (I bought the device as used faulty so don't know the update history). When I try to use the firmware upgrade / initialisation function to reset the tablet, Kies downloads the firmware but fails to connect to the tablet when I plug it in (in download mode, which I can access).
I have tried flashing a downloaded firmware using Odin3 v1.85 and it appears to start okay and copies cache.img but quickly hangs at the factoryfs.img stage.
I have tried different both win7x64 and winXP PCs with no success. I did try Heimdall, which uses a different USB driver, and while I did not have an appropriate Heimdall compatible firmware to flash, I was able to get a display of the current PIT information, so the tablet was communicating OK.
Does my device need repartitioning? I have seen many references to a PIT file, but don't know where to download it from.
This seems to be a common problem from what I can tell so far.
Any help appreciated.
Thanks.
Hello i have the same problem. I read all of your suggestions and guess that should be use a pit-file. Is this overwrite a system. I have troubled ROM compiled and want to install the new one downloaded from sammobiles fo my country. Am I right? Please help me?
So I was previously running the MF3 baseband on my SGH-I337 (ATT) and couldn't install any custom ROMs until I tried safestrap. I installed the Google Play Edition ROM and it worked successfully, except the WiFi wouldn't turn on. I could have flashed modem files but I was advised multiple times not to do so. Anyways, I was removing the ROM through safestrap and accidentally wiped my system and all its files I think. Now my phone is stuck in a bootloop (constant Samsung logo) and I can't recover with ODIN because I get an error (shown below). Also, I could only find a TAR file which ends with either MK2 or MDL, my phone was previously MF3, could this be the cause of any problem? Any fixes?
Additional Info:
1) I cannot boot into stock recovery, I'm always forced into download mode.
2) ODIN gives the error everytime I try to flash the stock ROM that I downloaded.
3) I've tried flashing the 16GB PIT file with little luck, the operation finished successfully but I'm still not able to flash anything else because:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm quite new to all of this, any help is greatly appreciated. Sorry if I'm leaving out information, just ask if needs be.:laugh:
My i337 is doing the same thing, except I started on mk2. I see tons of folks asking about complete write fail on google, so I know this is a bigger issue that hasn't been identified yet...but when I get this POS working, I am selling it and NEVER buying anything with a locked bootloader (or the AT&T logo) again. I wish I had researched better and chosen a tmobile S4 to use on at&t.
I got the exact same error like you do in Odin with flashing a new PDA / Recovery. Cannot get rid of error messages, status 7, fail in odin and so on, but my phone isnt in boot loop like yours..
GT-N8013
Blue/Gray
16GB Wifi Only Model
I was watching a youtube video, my tablet froze for an hour, died, then I let it charge and it rebooted into the samsung logo. After that it decided to go white screen and goes to a white screen every time it's booted. I've been trying to resolve this on my own with various resources for about a month now.
I can get to ODIN mode no problem, but I can't flash anything. I have recently bought a new OEM Samsung USB cable and tried multiple versions of ODIN on two different machines. Directly connected to the motherboard and not USB 3.0 ports.
I think the solution to my problem may be answered:
Here: http://forum.xda-developers.com/showthread.php?t=2268735
or
Here: http://forum.xda-developers.com/showthread.php?t=2713297
It is hard for me to comprehend the English used in the first link as I think Authors first language is not English. I think what he is saying is that if ODIN is not working then you have to flash the PIT file via adb and a SD card, but I cannot access Recovery, and I don't recall fully how to use ADB in Downloading Mode, if that's possible at all. He also states I may need to downgrade my bootloader version based on the last ROM that I had on my tablet. If someone could educate me on that I'd appreciate it.
The 2nd link says I need the stock firmware for my country(I live in the U.S. of A.) and to nand erase all but I feel like that should be used as a last resort. I did download both N8013UEALI3(4.0.4) & N8013UEUCMI3(4.1.2) from sammobile.com though.
When I try to flash just a Recovery/ROM, with Autoreboot checked, I get the PIT error message below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, with Auto Reboot & Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT by its self, Re-partition checked, I get the error message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to flash a PIT w/ Recovery/ROM, Re-partition Checked and Auto-Reboot checked, I get:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any assitance would be greatly appreciated, I've been without my tablet for a month now. I have any backup, I don't recall the ROM I flashed because it was so long ago, but I'm pretty sure the version was Jellybean. I know my recoevry was one of the later CWM TouchScreen Rom recoverys but I can't recall the version. Thanks for any help, please let me know what information I'm lacking or what I can do, thank you all for your time.
Update
Any assistance would be greatly appreciated. I have tried to different PIT files for the PIT mapping and they both failed. Getting pretty desperate now. I can't even NAND Erase All, I gave that a shot and it failed:
When I select NAND Erase All, stock rom(4.0.4 or 4.1.2), Pit, & Re-Partition checked, Nand Erase all Checked, I get the following in ODIN 3.07 and 3.09:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm starting to think its the ECCM and maybe I need a JTAG repair. Like I said before, I can't get into recovery, I just get a all white screen. When the tablet first died I got the Samsung logo and then it rebooted and went White, I never got the Samsung logo again. Any help please? Even if it's just recommendations for trusted JTAG repair sites, because I don't trust the ones I've found ths far. Or know PIT files that have worked for flashing on the N8013. Anything at all.
BUMP
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
onlysafonne said:
I found this article here: http://www.sammobile.com/forum/showthread.php?t=23562
Exact same problem I am having, I think I'm going to need a JTAG repair. I just posted a request to get some fresh PIT files from multiple android versions. I ill keep posting updates on how this is going, I feel alone in this issue since no one has said anything but I get multiple views...but I see more and more people are starting to post in the help section for this particular brand of tablet in the past 3-5months, it sounds terrible but I'm glad I'm not alone since I feel like im talking to myself here.
Just contacted Mobiletechvideos guys, I hope they are legit. I'm will to pay $50 for a jtag repair if i can have this tablet back.
Click to expand...
Click to collapse
@onlysafonne what file fails? I see your log above
carl1961 said:
@onlysafonne what file fails?
Click to expand...
Click to collapse
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
onlysafonne said:
I've tried to use both ODIN & Heimdall. All files are failing for me. I tried stock 4.0.4 & 4.1.2 Roms, 3 different PIT files, I even tried to NAND erase all with a stock rom and ODIN continues to fail for me. I installed a virutal box on multiple machines running XP SP3 since windows 7/8 weren't working for me as well, that failed as well. When I try to flash the PIT files I get the output from ODIN in my OP, nothing is working for me. I'm just thinking I experienced instant death on this tablet for no reason at all. The most success i've had is with Heimdall just being able to reboot the tablet for me and then go back to Downloading mode, but nothing else is responding for me.
I'f I can get some fresh pit files from fully operational devices I will know that I've done everything I can excluding JTAG repair myself. If I can't get some fresh PIT files from multiple android versions, then I might just have to send it to the Mobiletechvideos guys to see if they can repair.
Thanks for the reply and interest in my issue!
Click to expand...
Click to collapse
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Heimdall
carl1961 said:
no I got the pit file from here http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
tell me how to grab it and I will get it from my tablet now for you
Click to expand...
Click to collapse
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
onlysafonne said:
To download a copy of your PIT all you have to do is install Heimdall, with zadig driver (Samsung/General Device) , boot your tablet into Download mode, and download a copy of your PIT by going to Heimdall Frontend, clicking utilites, and downloading and saving your PIT to your desktop(or where ever you want) and uploading it for me.
Heimdall can be found here: http://glassechidna.com.au/heimdall/
After you are down with Heimdall, make sure you uninstall the driver from "Device Manager" in your USB Devices, that way, you can use ODIN again. A;; of this should only take about 5-10mins, as all the files are really small. i really appreciate this.
Click to expand...
Click to collapse
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
carl1961 said:
@onlysafonne
ok I did it also a compair to My-N8013.pit that you said did not work, they or identical so that may be bad news for you.
thread
http://forum.xda-developers.com/showthread.php?t=1916936
PIT Magic v1.3.10 - Samsung PIT Creator, Editor, Analyzer
Click to expand...
Click to collapse
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
if you not under warenty I would maybe buy a used one on ebay that might just have a cracked screen, you might even find a 32GB one
http://www.ebay.com/itm/Samsung-Galaxy-Note-10-1-32-GB-Wi-Fi-GT-N8013-/361155880699?pt=US_Tablets&hash=item54169166fb
onlysafonne said:
Thank you for this post, that helps me alot, it appears it is beyond recovery via ODIN at this point. Thank you for taking the time to compare your PIT to the previous one. I will wait for Mobiletech to contact me back and post an update from there.
Click to expand...
Click to collapse
onlysafonne, I have the same problem. I can use Odin and get to CWM but nothing I flash will get me past the Samsung Galaxy Note 10.1 image I cannot even get it to shut off. It will go black then power right back up.
I have flashed with Nand Erase All checked only
KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_u ser_low_ship.tar
Any ideas? I have not heard of JTAG
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Flying_Phil said:
I have a N8010 and I'm also in this kind of bootloop.
Nothing works.
I had OmniRom 4.4.4 installed and the newest TWRP.
I only can get into Download Mode.
When I try to get into Recovery the blue TWRP Screen pops up for a second and then it's going back to "Samsung Galaxy Note 10.1" Logo.
I even tried to disassemble the battery. But this didn't work either.
Any ideas what I can do? If not, I'll have to take it to repair. Got some warranty left, but I rather fix it myself.
Thanks
Click to expand...
Click to collapse
have you tryed to odin install your firmware? usally the bootloop is caused because you need to do a factory reset to get rid of (in your case OmniRom 4.4.4) your firmware as I see is http://www.sammobile.com/firmwares/confirm/31427/N8010XXUDNE4_N8010BTUDNF1_BTU.zip/
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or cwm recovery. But there is still twrp.
I can't open your link :-/
Flying_Phil said:
Yes, I did try that. Is still in bootloop afterwards. I also tried to flash stock recovery or can recovery. But there is still twrp.
I can't open your link :-/
Click to expand...
Click to collapse
try this N8010 recovery with the included 3.07 odin put in PDA slot and do no check re-partiton look at picture
@Flying_Phil
yes samfirmware is picky go here and search your N8010 you most likly need to signup (it's free) and as you see most odin updates or "home" which means it does not do a factory reset which is ok if your updating a stock unrooted rom so you need to do a factory reset when coming from a custom rom.
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Flying_Phil said:
well I tried to flash your attached file. Odin said "Pass!" but my Tablet still does the bootloop.
Like I said, I tried to flash several firmwares. All with this same result. First I tried the German version, then the Austrian and the Australian.
Now yours was the version for new zealand.
I have no clue, why this doesn't work.
Here is the log from Odin and I attached a screenshot.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_N8010XXUDNK1_N8010NZCDNK1_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Click to expand...
Click to collapse
ok so did you try and reboot to stock recovery and do a factory reset
carl1961 said:
ok so did you try and reboot to stock recovery and do a factory reset
Click to expand...
Click to collapse
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Flying_Phil said:
sorry, I forgot to tell about it.
Yes I tried to go into Recovery, but there ist still TWRP on it and it still crashes after a second.
I even tried the flash without checking "Auto reboot", so I could boot directly into recovery, but it worked neither.
Click to expand...
Click to collapse
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
carl1961 said:
ok lets backtrack
what is your tablets stock info? and or you 16 GB or 32 GB
Click to expand...
Click to collapse
GT-N8010 16GB. Need more?
Screwed up, need some help. (4.4.2 to 4.3 attempt gone bad)
Hello everyone out there! Long time lurker, first time poster.
So I've had what seems to be a soft brick on my verizon s3 (SCH-I535) and it is time to just lay it out here because (as always) I can't find the fix to MY problem (so selfish I know )
So let's start at the very beginning..
I have had my s3 for awhile now and I ended up rooting the phone to stay on 4.3. The biggest reason for this was to keep FoxFi working (I have no internet where I live and tethering is the only option). Once FoxFi was working for 4.4 I decided to go ahead and update but first I had to unroot which wasn't a big deal. I unrooted and voila! I was on 4.4.2!
Okay so I just tried ThePagel's methosd
When I upgraded, I noticed my FoxFi was VERY slow all of a sudden and being a gamer, I didn't like this one bit! So I thought to myself "Hey, just flash back to your 4.3 file."... as I hear all of your collective heads shaking in disappointment, followed by facepalms, I now see the error of my ways.. Attempting to flash back to 4.3 of course hung my phone up in Odin (It was stuck at SetupConnect I believe) and this led to my soft brick. Bummer...
So what have I attempted? Well I kept seeing this thread pop up, http://forum.xda-developers.com/showthread.php?t=2586319 but it's talking about the OTA for 4.3.... I was 4.4.2. I also attempted to fix the issue via this thread: http://forum.xda-developers.com/showthread.php?t=1840030 and alas, it fails me as well.
Now as far as errors for these trails, let's get down to what I see on my phone and what I see on odin..
When trying the Hero's method, Odin fails with this log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRALEC.bootchain.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone, I get this log: (Under download mode of course)
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
(In grey)
QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER RP (or AP, can't tell) SWREV: 2
(in red)
SW REV CHECK FAIL : Fused 2 > Binary 0.
Right now I am downloading the file needed in ThePagel's fix but it is VERY slow (only dial up and satellite internet I **** you not, out here). When that gets done I will come back here and post the same logs for both the phone and ODIN should it not work.
I see there are a lot of fixes out there for various things but the problem is, I don't know exactly what is wrong with my phone. Of course if I try to turn it on normally I get the yellow triangle so the fact it turns on means it is a soft brick. I have also read a lot of threads talking about custom recovery but I don't know how this works. Does custom recovery get me back into recovery mode? Or is this only for when your phone is rooted. Anyway, I'd love to pick some brains on this matter and maybe someone sees something in the errors that I do not.
I apologize for my ignorance... all I wanted to do was go back to 4.3 and root it to stay there.. if this can not be done and I am forced to stay with 4.4.2, I will do so.. but any advice for either would be a great welcomed sight. Send links to threads and what have you if you don't want to type, other than to call me an idiot, I deserve it for not reading and understanding everything fully before attempting this flash.
Okay I just tried ThePagel's method and this is what I get:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_I535VRUCNC1_I535VZWCNC1_2198062_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone, everything looks the same except the last line reads:
SW REV CHECK FAIL : Fused 2 > Binary 1.
So.....what do you guys think?
****UPDATE****
I was able to find a stock, no frills 4.4.2 kitkat and I flashed that. My phone is back working again. Is there a way to delete this thread?
I don't believe there is any way to delete the thread without getting a forum moderator to do so.
Personally I would recommend against deleting it. Better would be using it as a teaching example for others who find themselves in the same predicament, especially since you added how you fixed the issue. It may also help some from making the same error.
Hi everyone,
On my S6 all of a sudden I got the blue screen saying that I need to connect it with Smart Switch for a Recovery. Smart Switch wont recognize the S6. So I tried with Odin to flash a new stock firmware but I keep getting NAND Write Operation Failed after boots.img.
This phone hasnt been used for several months, but I want to recover it because there are very valuable holiday photos on it. So the internal memory cant be wiped. I a hoping that flashing a stock rom will make the phone boot again.
Odin Log
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried various stock roms and also various usb cables. The phone was last used in the 1st week of october, so the first rom (6.0.1.) I tried to flash was the lastest prior to it (september). After that I tried August and then I jumped in time to January because I read about a rollback isnt possible. After January (the last month for 6.0.1) I decided to try the latest stock rom avaible for 7.0.
My phone is unbranded but just incase I also tried the 3 branded roms for my country (the netherlands) for vodafone, T-Mobile and Ben. All tried roms gave the same response as stated above.
I also tried to unpack the tar file and use TarCreator to create a separate Tar file for each .img. Then flash them 1 by 1 in Odin. But again the same Nand write error is given.
Odin versions that I used: 1.85 and 1.10.6
Things I didnt try yet:
Pit I kept the Pit empty on Odin. After some research it still wasnt clear to me if using a stock Pit file would not wipe the internal memory.
I hope some here could clarify that. And if I can safely use a Pit file, do i then 1st run the pit file, restart Odin and then flash the Rom. Or can i just enter them both at the same time/session?
BootloaderI found some info that said that boatloader might be corrupted? Again also about that I couldnt find a clear answer if it would wipe the internal memory. Also I am not sure where to find good boatloader files.
I've spend now 3 days on google searching solutions and trying different roms and I dont know what to try next. I hope one of the experts on this forum might know another solution or can give a clear answer on the Pit or Boatloader options.
Kind regards.
Try with Newest ODIN (3.12.7) instead of a Very Old ODIN for at Android 2.2 only (3.08) -> thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection
Illutorium said:
Try with Newest ODIN (3.12.7) instead of a Very Old ODIN for at Android 2.2 only (3.08) -> thedroidguru.com/download-latest-odin-odin3-all-versions-full-collection
Click to expand...
Click to collapse
Thanks! Somehow I was under the assumption that 3,18 was higher but I see the mistake now.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
After boot.img the phone turns off black screen, then goes back to the smart switch recovery screen. Gave it a few more tries and tried with Auto Boot enable and disabled. After the last attempt the phone screen stays black, even when plugged into the charger
Also Ive noticed that the right side of the phone now gets very hot when plugged in.
The screen still stays black. The phone wont even turn on anymore :/
Flashing stock will wipe your data anyway. There is a chance it won't format your internal storage though. If there is VERY important data, you should go to a professional data recovery service.