[Q&A] ▬CЯEED v4▬ |DXKT7|[ROM][KERNEL] - Samsung Galaxy Fit GT 5670

Q&A for ▬CЯEED v4▬ |DXKT7|[ROM][KERNEL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ▬CЯEED v4▬ |DXKT7|[ROM][KERNEL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

odin & ops download link expired and after installing odin multidownloader v4.43 com
pratyush.creed said:
How to Install Rom:
1.Download ROM and Copy to SD Card.
2.Install Clockworkmod Recovery From Here: CWM 5
3.Boot Into Recovery Mode.
4.Flash Via CWM.
5.Do a Data Reset.
How to Install Rom[NOOB-PROOF]:
1.At First Download the Tools Required to Install Stock Rom and Custom Recovery : HERE-(ODIN+OPS)
2.Extract The File.You Will Find Two Files BENI.OPS and ODIN.exe.
3.Download and Install the Samsung Usb Drivers On Your PC
*Checking If You have Froyo or Gingerbread Installed*
Open Settings > About Phone
At Bottom Check the Android Version :
2.2.1=Froyo
2.3.3/2.3.4/2.3.6=Gingerbread
If you have Froyo Installed Follow the Steps to Update to Gingerbread On Your Device :
*You Should Do a Factory Reset/Data Wipe by Dialling this Code " *2767*3855#" *
1.Download the Gingerbread Firmware from Here and Extract it: DDKT3 2.3.6
2.After Download is Finished Power Off Your Phone.
3.Now Turn it On by Pressing these 3 Keys Together (Volume Down + Home Key + Power Button)
4.This Will Take You To Download Mode.(A Yellow Triangle With Android Bot Logo)
5.Open the ODIN.exe on your PC .
6.On the Left Side Check "One Package" Option.
7.At Bottom Right Side on One Package option Point it to the Gingerbread Firmware You Just Downloaded and Extracted. (It Should be a *.tar File)
8.Connect The USB Cable From PC to Phone.
9.Then You will see the First Box in ODIN Below 'Com Port Mapping' Turns Yellow
10.Click Start
11.After around 4-5 minutes Gingerbread Installation On Your Device will be Completed.
Now,If Your Device is Running Gingerbread Continue Towards Installation Of ClockworkMod Revery.
1.Download the 'ClockworkMod' from Here : CWM 5 *Do Press Thanks For Sir Tj's Hardwork*
2.After Download is Finished Power Off Your Phone.
3.Now Turn it On by Pressing these 3 Keys Together (Volume Down + Home Key + Power Button)
4.This Will Take You To Download Mode.(A Yellow Triangle With Android Bot Logo)
5.Open the ODIN.exe on your PC .
6.On the Left Side Check "One Package" Option.
7.At Bottom Right Side on One Package option Point it to the ClockworkMod Recovery You Just Downloaded. (It Should be a *.tar File)
8.Connect The USB Cable From PC to Phone.
9.Then You will see the First Box in ODIN Below 'Com Port Mapping' Turns Yellow
10.Click Start
11.After around 10 Seconds ClockworkMod Installation On Your Device will be Completed. (You Remove Cable After 10 Seconds as a the ODIN will take it to 5 Minutes)
Now You Have Gingerbread and Clockwork Mod Installed.
To Install Creed Follow the Steps Below:
1.Download the Copy The Latest Creed Version To Your SDCard.
2.Power Off the Device.
3.Switch it On by Pressing "Middle Key+ Power Key"
4.This will Take You to ClockworkMod Recovery .
5.In Recovery Touch Doesnt Works ,So use Volume Keys For Up/Down Options ,Middle Key to Enter and Back Key to go Back.
6.Select the Option "Data Wipe" and Then "Yes"
7.Now Goto 'Mount' Option .
8.Select "Format System" and Then "Yes"
9.Now Go Back To Main Menu and Select Option "Install Zip From SdCard"
10.Now Select "Choose Zip"
11.Point to the Location Where You Saved The Creed Rom
12.Select The Zip and Then Select "Yes"
13.Rom May Take Some Time To Install
14.If it Asks To Reboot Choose 'No' ,Jus go back again to the Main Menu and Do a Data Wipe Again.
15.Now Select 'Reboot'
Congratulations !!! Creed is Installed On Your Galaxy Fit GT-S5670.
Keep Enjoying and Do Post Feedbacks/Problems/Sugestions To Help Making the Rom Better.
Click to expand...
Click to collapse
help please

Related

ICS stock (oneclick) and CWM via Rom Manager

I have taken my new skyrocket and flashed it with the ICS stock (oneclick) rooted it using these instructions:
Code:
How to Root and Install CWM Recovery on Galaxy S2 Skyrocket ICS Firmware
Part I: Installing CWM Recovery (Required before rooting)
1.Download the CWM package.
Download Link | Filename: SkyrocketCWMrecovery.tar
2.Download Odin 1.85 from → here.
Filename: Odin 1.85.zip | Size: 199 KB
3.Extract the contents of the Odin 1.85.zip file to a folder.
4.Open Odin (from step 3) — double-click the Odin3 v1.85.exe that you got after extracting the file Odin 1.85.zip.
5.Now, boot into download mode on the phone. To do this, turn off your phone. Plug in your USB cable to the computer, but not to the phone. Then, holding the Volume Up and Volume Down buttons on the phone, plug in the USB cable to the phone while holding those buttons. Once the Download mode screen shows up, let go of the buttons.
6.You should get the message “Added!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed. See point 3 above under Pre-Installation Requirements.
7.In Odin, click the PDA tab, and select the file SkyrocketCWMrecovery.tar (from step 1).
8.Important! Do not make any other changes in Odin except selecting the required files as given in step 7. Leave all other options as they are.
9.Now hit the START button to start flashing Clockworkmod recovery on your Galaxy S2 Skyrocket. After flashing is complete, the phone will reboot, and you’ll get a PASS message (with green background) in Odin. You can now safely disconnect your phone.
IMPORTANT Note: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, do the following – disconnect the phone from the PC, close ODIN, remove battery, re-insert it, then do the procedure again from Step 4.
Part II: Root the ICS Firmware
1.Download the root package.
Download Link | Filename: Superuser-3.0.7-efghi-signed.zip
2.Transfer the Superuser-3.0.7-efghi-signed.zip file to your internal SD card.
3.Turn off the phone, then boot into recovery. To do so, press and hold the Volume Up + Volume Down + Power buttons till the first white Samsung text shows up, then let them go. You’ll boot into recovery soon enough. In recovery, use Volume buttons to navigate and the Power button to select.
4.Select install zip from sdcard, then select choose zip from sdcard. Scroll to the Superuser-3.0.7-efghi-signed.zip file on the sdcard and select it. Confirm installation by selecting Yes – Install Superuser-3.0.7-efghi-signed.zip on the next screen.
5.After the installation is complete, select go back then select reboot system now to reboot the phone. You now have a rooted UCALC4 ICS firmware on your Galaxy S2 Skyrocket.
I have the CWM recovery installed, but within Rom manager It's telling me CWM recovery needs to be installed and I need to select a phone. I see the T-Mobile Galaxy S2, but I do not see the ATT Skyrocket. Any ideas?
For some odd reason Im getting "Android is upgrading.. Optimizing X of 62" on every reboot.
Any ideas on this as well?
Don't use ROM Manager.... It only works for fixing permissions.
I'd suggest do all these task in CWM and keep rom manager away.
custommx3 said:
I have taken my new skyrocket and flashed it with the ICS stock (oneclick) rooted it using these instructions:
Code:
How to Root and Install CWM Recovery on Galaxy S2 Skyrocket ICS Firmware
Part I: Installing CWM Recovery (Required before rooting)
1.Download the CWM package.
Download Link | Filename: SkyrocketCWMrecovery.tar
2.Download Odin 1.85 from → here.
Filename: Odin 1.85.zip | Size: 199 KB
3.Extract the contents of the Odin 1.85.zip file to a folder.
4.Open Odin (from step 3) — double-click the Odin3 v1.85.exe that you got after extracting the file Odin 1.85.zip.
5.Now, boot into download mode on the phone. To do this, turn off your phone. Plug in your USB cable to the computer, but not to the phone. Then, holding the Volume Up and Volume Down buttons on the phone, plug in the USB cable to the phone while holding those buttons. Once the Download mode screen shows up, let go of the buttons.
6.You should get the message “Added!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed. See point 3 above under Pre-Installation Requirements.
7.In Odin, click the PDA tab, and select the file SkyrocketCWMrecovery.tar (from step 1).
8.Important! Do not make any other changes in Odin except selecting the required files as given in step 7. Leave all other options as they are.
9.Now hit the START button to start flashing Clockworkmod recovery on your Galaxy S2 Skyrocket. After flashing is complete, the phone will reboot, and you’ll get a PASS message (with green background) in Odin. You can now safely disconnect your phone.
IMPORTANT Note: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, do the following – disconnect the phone from the PC, close ODIN, remove battery, re-insert it, then do the procedure again from Step 4.
Part II: Root the ICS Firmware
1.Download the root package.
Download Link | Filename: Superuser-3.0.7-efghi-signed.zip
2.Transfer the Superuser-3.0.7-efghi-signed.zip file to your internal SD card.
3.Turn off the phone, then boot into recovery. To do so, press and hold the Volume Up + Volume Down + Power buttons till the first white Samsung text shows up, then let them go. You’ll boot into recovery soon enough. In recovery, use Volume buttons to navigate and the Power button to select.
4.Select install zip from sdcard, then select choose zip from sdcard. Scroll to the Superuser-3.0.7-efghi-signed.zip file on the sdcard and select it. Confirm installation by selecting Yes – Install Superuser-3.0.7-efghi-signed.zip on the next screen.
5.After the installation is complete, select go back then select reboot system now to reboot the phone. You now have a rooted UCALC4 ICS firmware on your Galaxy S2 Skyrocket.
I have the CWM recovery installed, but within Rom manager It's telling me CWM recovery needs to be installed and I need to select a phone. I see the T-Mobile Galaxy S2, but I do not see the ATT Skyrocket. Any ideas?
For some odd reason Im getting "Android is upgrading.. Optimizing X of 62" on every reboot.
Any ideas on this as well?
Click to expand...
Click to collapse
+1.
The CWM in app store is not as up-to-date as one would think. If you use it to install CWM it will install an OLDER version... Forget about it. I used to use it just to boot to recovery, wihtout the hassle of the buttons. Only for that.
Re the "Android is upgrading...." The old applications were not deleted completely. Wipe cache partition, Fix permissions, wipe dalvik cache (in CWM Advanced).
Good luck !

A2107A-H Firmware update, Custom Rom and CWM Recovery (calling feature - unlocked)

Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)​
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse
Reupload Please
Please reupload the tools section.
Thank you in advance
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
pemergency said:
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
Click to expand...
Click to collapse
Hi there,
Can you try http://uploaded.net/ ?
I used it for many files so far and seems to work OK.
Thank you.
re
yesterday on Chinese side get everything.
flashed - rom (lots of Chinese garbage) does - only Chinese and English.
English also very buggy - phone goes.
sorry ... google translator
.................................................
Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)​
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse
german language ?
Yes for settings and all stock app. All apps added by myself are not translated
Sent from my GT-N7000 using xda app-developers app
brief assessment of the costum rom "pemergency" mod = which must be paid
- Setup / flash -> OK
- IMEI must be corrected manually by terminal as tool does not work
- Constant error message "simcard failed" (slot2) although only 1 slot has
- "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
- Spoke only Russian / English / chinese integrated as standart
- Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
mrbonsen said:
brief assessment of the costum rom "pemergency" mod = which must be paid
a) Setup / flash -> OK
b) IMEI must be corrected manually by terminal as tool does not work
c) Constant error message "simcard failed" (slot2) although only 1 slot has
d) "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
e) Spoke only Russian / English / chinese integrated as standart
f) Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
Click to expand...
Click to collapse
a) no comment
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
c) This Rom is for A2107a-h which is a 2 slots device, so I dont see a problem on this point
d) I said as this is modiffication, I decide to remove a stock launcher, you can install any other one of your choice
e) I also answered to your question as for german language only original apps are translated and the main system, on other threeead is clearlly said as this rom using more locale 2 for translation.
f) and as a last one, why you expecting anything original in a modiffied ROM?
I stoping to doing anything with this ROM for a simple reason:
- FREE ROM = 900 downloads,
- PAID ROM FOR £5 = 5 downloads - embarrassing
Why?
and one more thing...
My correspondence with mrbonsen, when I tried to help him out with the installation process is also interesting. About 10 emails with instructions to mrbonsen and also 10 emails of insults from mrbonsen. That means something....
So conclusion is simply... go back to your original firmware and I will give you your £5 back
and also 10 emails of insults from mrbonsen.
Click to expand...
Click to collapse
I would, at least at three mail the conversation ended :victory:
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
Click to expand...
Click to collapse
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
mrbonsen said:
I would, at least at three mail the conversation ended :victory:
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
Click to expand...
Click to collapse
Hehe, ok, this is all my fault, I just should expecting as this ROM could be installed by a persona like you, my bad
BTW I using this ROM from a weak or more and have no problem at all. Waiting for comment from other users ...
Sent from my IdeaTab A2107A-H using XDA Premium HD app
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
pemergency said:
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Click to expand...
Click to collapse
You did a great job and 900 downloads are impressive. i have a A2107A-H 1GHz 1GB RAM 16GB Flash - how come nobody is providing feedback or helping out in this development? Could there be a way to update.zip just the standard factory ROM? maybe that could be possible by doing a diff on the chinese and european source code? sorry i'm just a lamer looking to help out. any news from lenovo developers on the 4.1 release?
today is your cwm rom accessible for download for trial?
Ofcourse it is possible to get back the standard ROM just ask someone who still have a European ROM to do a copy by nandroid backup and you can restore this by centeCWM. So after that you will have a stock ROM with CWM but without calling feature.
I nearly finish another ROM with calling feature but this will be based on Russian ROM. I just need to get European system backup to do it same thing with European ROM.
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Password for CWM Firmware : xdadevpemergency
NEW MANUAL AND FILES (discontinued project)
For both option's copy "clockworkmode/backup/modpemergency" folder to sdcard internal or external!!!
OPTION 1: For CWM Recovery devices:
Downloads:
Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your internal storage or external sdcard.
It should looks like this one:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore from internal sdcard" or "advanced restore" in a case of using external card
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advanced/wipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
OPTION 2: For non CWM recovery devices
Copy clockworkmode/backup/modpemergency to your external card, it should looks like this:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
downloads:
1. CWM Recovery https://hotfile.com/dl/182805290/fe4ac19/CWM_Firmware.zip.html
2. Flash Tools https://hotfile.com/dl/182820835/8dd3c06/Tools.rar.html
3. New Flash Tool without error (replacement for the one from Tools.rar package https://hotfile.com/dl/183057140/692cbbb/SP_MDT_src_v3.1216.02_A2012.05.22.zip.html
4. Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
5. USB Driver
For windows xp https://hotfile.com/dl/182950442/360c725/USB_VCOM_Driver.zip.html
For windows seven https://hotfile.com/dl/182950251/0c9ee3d/usb_driver.zip.html
Install CWM Recovery:
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
The "Data source file" and "Da file name" should have assigned path from SP_MDT_src_v3.1216.02_A2012.05.22 folder. If is not assigned properly please do the folowing steps:
- File/Open Download Agent File and choose file MTK_DATABASE.mdb from SP_MDT_src_v3.1216.02_A2012.05.22 folder
and
- Factory database/Setup data source file and choose file MTK_AllInOne_DA.bin from SP_MDT_src_v3.1216.02_A2012.05.22 folder
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Install pemergency custom ROM
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your external sdcard.
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore"
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advancedwipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
After that sometimes it is nessesary to repair IMEI
IMEI repair
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
Good Luck...
NEW ROM on the way. Will be posted on the end of this week.
- oryginal multilanguage for most of languages like in a stock european ROM (not more locale)
- fixed most bugs from the previous pemergency mod
- stock launcher
- Battery life incresed to 30% more then oryginal ROM
- Battery status in a settings
- Downloading all apps from google store (no incompatibility problem)
- Quick Boot
- Better sim management
- All options for synchronisation, like in oryginal european stock ROM
and many many more...
Finished in 98%
Anyone would like to pay for this £5?
Free update for everyone who bought the previous version!!!
ok, I certainly update :good:
may inform some user from the German forum.
pretty much at the end of the page
http://www.android-hilfe.de/lenovo-ideapad-a2-forum/341347-a2107a-root-cwm-custom-rom-5.html

[How To] Install Jellybean 4.1.2 +Root

Install XXLPY Android 4.1.2 Jelly Bean Firmware on I9070 Galaxy S Advance
LINK-
http://www.hotfile.com/dl/187838919/fd98d34/I9070XXLPY_I9070SERLPY_SER.zip.html
STEPS-
Android 4.1.2 Official Firmware
1.Extract Firmware zip file that you downloaded already from above link, you will get a .tar file and some other files.
2.Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
3.Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
4.Now, put the Galaxy S Advance I9070 phone in Download Mode by pressing pressing and holding down the Volume Down and Home buttons while pressing the Power button until you are welcomed by a green robot indicating you are in Download Mode.
5.Now run Odin3 v3.07.exe (see Step 2) as an Administrator because Admin privileges is required to complete the process smoothly.
6.Now connect your Galaxy S Advance GT-I9070 with your PC using USB cable. A message will arrive under Odin’s message box in the bottom left saying “Added!!”. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should then reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
7.Select these files in Odin at respective buttons from extracted I9070XXLPY firmware folder :
a)Click the PDA Button, and select the .tar file here with *code* appearing in its name
8.in Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file (see Step 7.4).
9.Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
10.Once flashing completed, the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
NOTE-If you have PARAMETER ERROR delete.md5,extension should end with .tar and put it in PDA.
ROOT(by shaaan)
How to :
1. Download the zip and place it in the root of your sd card.
PS : SD Card is a must.
2. Reboot to the stock recovery.
3. Select install update from external storage.
4. Select the root.zip file.
5. Viola
Enjoy your rooted JB.
LINK- http://d-h.st/ook
Thread already there under general.
http://forum.xda-developers.com/showthread.php?t=2086965
Reported.
hmm
thats was not a proper guide,
you edited it later.
Perform a factory reset after booting 4.1.2 ... else you will get "Insert SIM card" error.
Thread closed, its pretty much the same as this one >>> http://forum.xda-developers.com/showthread.php?t=2086965

Rooting and CWMR for Qmobile Noir A7

Earlier we posted the screenshots, claiming to finally have nailed Qmobile Noir A7. Here is the most requested post for the step by step method of rooting, All you are required to do is follow the steps.
Installing CWMR
1. Download the Files
i. Scatter and CWMR for A7(Download Here)
ii. SPFlashTool ( Download Here )
iii. Drivers for A7 – CD or from the Q site.
iv. root_a7.zip( Download Here )
2. With phone on, connect the phone to the computer and start USB Debugging.
3. Install the Drivers to it through driver file.
4. Now Switch the phone off and connect the phone to the computer again. It’ll ask you to install the another driver. Install it from the preloaders downloaded.
5. Put the file in Scatter per Image Below.
6. Ensure nothing but the recovery check box is clicked. Rest remain unchecked.
7. Switch off your Phone. Take the Battery out for 5 Secs and reinsert the Battery.
8. On Flashtool press download.
9. Connect your phone cable connecting it to the computer. No hurries take your time. (Ensure when download was clicked your phone was not connected to the phone)
10. Upon successful flashing you will see the green circle icon.
11. Close the tool and restart your phone in recovery mode by holding power + Volume up
12. You should be able to enter CWMR.
Rooting Phone
Download Root_A7.zip file
Copy to SD card.
Power off your phone.
Turn on by pressing power button + volume up button.
Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “Root_A7.zip” –> Select Yes
When done Successfully Go Back main CWMR And Reboot your phone.
Check your applications section you’d have superuser there.
Open Superuser app and in settings update your binaries.(Congratulations you are rooted).
PS : INCPak never lied to anyone, doubt ever us we just ensure that this procedure is verified and doesn’t mess your phone !
- See more at: http://www.incpak.com/tech/lets-root-qmobile-noir-a7/#sthash.Vds1TVe2.dpuf
CREDITS:UBAID KHAN AND KHURRAM

[Recovery+Backup+Root] Walton Primo C1

Cautions:
1.your warranty is now void.
2.do this at your own risk.
3.read the whole post before starting.
Flashing CWM recovery and taking backup :
1. Download the package and extract all files.
2. Extract the driver.zip located in drivers folder->1
3. Install the driver.if your OS is 64bit then install the x64 one.if the OS is 32bit,then the x86 one.
4. Open researchdownload application
5. Select the 2nd button with double cog sign.
6. Now a new window will appear like the screenshot attached.
7. Right click on the file name field.choose the files located in "Required files" folder of the package.
be careful here.Put fdl1 in fdl1 field,fdl2 in 2nd field and the recovery image(extract the "CWM-recovery-SC8810-nonpadded.zip") in recovery field. Then press the "OK" button.
8. Press the Start (Play) button in ResearchDownload -application (third button).
9. Turn off the phone.
10. Keep holding the "- volume" key. Without releasing the button "- volume" plug the usb cable
11. The process of CWM- burning should be started now in ResearchDownload-application and it will take approximately 1 Minute.
I think you can release the Vol.Button, but I had kept it nevertheless.
12. Wait until the CWM-flashing has been finished (A green sign will appeare and "Passed" will be shown in ResearchDownload- application window).
13. Remove the battery, wait 20 seconds. Put battery back and turn on the phone.
14. now hold the vol (-) and power button until the screen flashes (40 seconds or less or more) and now you are in the CWM recovery menu.
15. PLEASE make a full backup by the "backup and restore" option .make sure there's about 500mb free space in your micro SD card.
16. after the backup reboot the phone and PLEASE store the backup files in somewhere else..(the whole ''clockworkmod'' folder)
congratulation. you have done a full backup and flashed your CWM recovery.
Rooting device:
*don't do this.if u find that your backup size is lower than 250mb~300mb(slight +/- may occur)
1. download and put the "superuserandfullbackup.zip" in your micro SD card
2. power off your device.
2. Reboot to Recovery by holding volume (-) and power button until the screen flashes and recovery menu comes.
3. just go to "install zip from sdcard option and select the zip "superuserandfullbackup.zip"
4. flash it
5. reboot.
Advices:
Rooting is dangerous.so first make a full backup of your unrooted stock Rom just after flashing CWM.
Store the backup(size will be around 250mb~300mb(+/- ) in someplace safe.it's the life of your phone.If anything goes wrong,it's the only key to fix your phone.......be careful.........
Getting back your warranty:
Restore your stock Rom's backup.Then,flash the stock recovery(included in the package.find it in RECOVERIES folder),in the same way you've flashed the CWM.
good luck.and thanks for reading this.

Categories

Resources