Hello everyone,
I have a G920V (Verizon S6) and unfortunately it was soft bricked this afternoon. It's stuck on the "Start Up Failed" screen and wants me to use the Verizon Repair Software which I don't have nor can install because the device is bricked. I want to use Odin to flash the stock firmware back on to the device while using the pit file to re-partition the device. Odin gets stuck on "NAND Write Start!!" which leads be to believe that his is the only way to solve this.
Does anyone have this file or know where I can get it?
Curious but did you check this thread first?
http://forum.xda-developers.com/verizon-galaxy-s6/general/verizon-s6-stock-restore-files-t3096000
krelvinaz said:
Curious but did you check this thread first?
http://forum.xda-developers.com/verizon-galaxy-s6/general/verizon-s6-stock-restore-files-t3096000
Click to expand...
Click to collapse
Awesome thanks! I had to use Odin 3.10.6 and the OE2 ROM and I'm all good now.
Related
Can someone help me out as I am new to all of this... I have searched a lot of tutorials and threads but cannot find anything that makes sence to me... or something that does not mention root.
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Hey there guys.
Long time creeper first time post. Plus a while since I have even tried to root or flash custom roms.
I succesfully rooted my verizon I535 Galaxy SIII 4.4.2 but went to flash Liquid smooth (which i know now i wasnt supposed to) onto it and got:
system software not authorized by verizon has been found blah blah blah. but i can still get into download mode. but not recovery mode. In download mode it reads:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER AP SWERV: 2
I got the files i need from [GUIDE Win/Linux/Mac] Debrick 4.3 with Odin or Verizon Utility + PIT [SOFT BRICK] thread.
Im on Mac and got JOdin working and followed every step to the T. In my termal window it says device detected but in JOdin it still has the red "Disconnected" and in message window it reads <ID:0/008> Added!! Device Not Detected.
any help or ideas would be greatly appreciated.
anyone?
No one has any ideas? Im really at my wits end here. :crying:
Help me all mighty Droid Gurus, You are my only hope!
artcrymes said:
No one has any ideas? Im really at my wits end here. :crying:
Help me all mighty Droid Gurus, You are my only hope!
Click to expand...
Click to collapse
Not too many ppl have MAC, you should try to find a PC and see if it works.
Using mobile XDA, and entered question in wrong thread... sorry!
JOdin doesn't work with 4.4.2. Personal experience. Only 4.3 or lower. You need to get a PC. It is required to use Odin on 4.4.2 like that.
Sent from my HTC One M8 running NuSenseSIX. S-OFF.
Hey guys,
I have a semi-bricked AT&T Note Pro 12.2
I am able to get into download mode. When trying to boot I get an error about not being able to find the PIT and bad flash. This tablet tried to take an OTA but during the update process it rebooted and we are now stuck here.
Would it be possible for someone to provide their PIT for 5.1.1? Or even better, an ODIN tar. All I have been able to find so far are OTAs which do not help me in Odin.
chriskader said:
Hey guys,
I have a semi-bricked AT&T Note Pro 12.2
I am able to get into download mode. When trying to boot I get an error about not being able to find the PIT and bad flash. This tablet tried to take an OTA but during the update process it rebooted and we are now stuck here.
Would it be possible for someone to provide their PIT for 5.1.1? Or even better, an ODIN tar. All I have been able to find so far are OTAs which do not help me in Odin.
Click to expand...
Click to collapse
You cant find it here?
http://www.sammobile.com/firmwares/
I soft bricked it using odin trying to downgrade to kitkat from lolipop. Can anyone link me to a working firmware for Samsung Galaxy s5 sm-g900a. Is there anyway to fix this? I could goto sammobile.com/firmwares and search sm-g900a and load the ap tar.md5 file and start the proccess? Anyway to download just the AP one besides the other HUGE files (BL,CP,CSM)
For God sakes someone help me!
Tronlegend said:
I soft bricked it using odin trying to downgrade to kitkat from lolipop. Can anyone link me to a working firmware for Samsung Galaxy s5 sm-g900a. Is there anyway to fix this? I could goto sammobile.com/firmwares and search sm-g900a and load the ap tar.md5 file and start the proccess? Anyway to download just the AP one besides the other HUGE files (BL,CP,CSM)
Click to expand...
Click to collapse
ll
I dont know if i should post this here but here i go. Hey Guys i am very new to xda and very new to rooting. i recently rooted my galaxy s7 edge (sm-g935fd)
And my phone wasnt connecting to phone and i searched and they said to turn off usb debugging. and then i restarted my phone once and it said custom binary blocked by frp lock.
and since then i have been trying for almost three days and i am hopeless. I did factory reset by holding power and volume up and did not work
i tried using odin to upload a stock firmware but i get nand start and then fail.
i have tried a few post about how to fix nand but i cant understand it as it is not very clear
So please i really need help on how i can fix this
my device details
Samsung s7 edge (Says Duos on the back)
Model- SM-G935FD
Please help a brother out
oh and it says sw rev check bootloader failed when i use odin for new stock firmware
Saifu.jpg said:
I dont know if i should post this here but here i go. Hey Guys i am very new to xda and very new to rooting. i recently rooted my galaxy s7 edge (sm-g935fd)
And my phone wasnt connecting to phone and i searched and they said to turn off usb debugging. and then i restarted my phone once and it said custom binary blocked by frp lock.
and since then i have been trying for almost three days and i am hopeless. I did factory reset by holding power and volume up and did not work
i tried using odin to upload a stock firmware but i get nand start and then fail.
i have tried a few post about how to fix nand but i cant understand it as it is not very clear
So please i really need help on how i can fix this
my device details
Samsung s7 edge (Says Duos on the back)
Model- SM-G935FD
Please help a brother out
oh and it says sw rev check bootloader failed when i use odin for new stock firmware
Click to expand...
Click to collapse
The firmware that you are trying to flash is giving you the sw rev error because that firmware is an older/downgraded version than the version that is already on the phone. You have to flash the firmware that is the same as what is already on the device or a newer version, you can't flash an older version. Find the newest, most updated firmware that you can find for your specific model number.
Do a Google search for:
"Stock firmware for SM-G935FD"
Then find the newest available version that is made for your specific region/carrier.
Sent from my SM-S767VL using Tapatalk
Thank you. I shall try this let you know.