* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
______________________________________________________________________________________________________
Flash CTRecovery from this post (100% Working recovery for Rooting the device)
to check what is working with this recovery click here
Generic Guide
• Make sure to have the MTK driver properly installed
• Make sure to Click on USB Debugging
• Download the compatible SP Flash Tool for your device
• Download the CTR Recovery for your device
• Get the appropriate Scatter for your device (also available in the Firmware directory)
• Run Flash_Tool.exe has an administrator
• Click on "Scatter Loading" and choose the scatter MTxxx_Android_scatter_emmc.txt file
• Unckeck all the partition except the recovery one in order to flash only the recovery
• Click on the recovery path, and choose the CTR Recovery file to flash
You should have something like :
• SP Flash Tool v3 :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
• SP Flash Tool v5 :
• Click on "Download" : SPFT is now waiting for a device a COM port to Flash
• Remove your battery from your device, or unplug it, or make sure your device if off
• Plug your device to your PC with USB cable (a good cable, on a direct back USB port, avoid front USB ports)
• The flashing process will start automatically : do not unplug your USB cable !
• A red bar for COM loading, a purple bar for Preloader Flashing, a yellow bar for Firmware flashing
• Wait for a Green Circle saying the flash process is finished, like below shown.
• Unplug the USB cable, close SPFT, but don't power on your device
• Boot your device directly into Recovery with the key combination (it's Vol- + Power on many MTK devices, but could be different depending the device)
• You can also go to recovery through adb.
like: adb.exe reboot recovery
And check that CTRecovery installed.
Related
Hy everybody :laugh:
Whats Features in CWM 7.0.5.4 (M_A_H) version:
* cyan colors are stunning
* cwm can kill instantly without reboot
* cleanup tab option: shortcut to try to fix forcequits after updates, return to recovery and select on the main screen (Wipes Cache, dalvik, and fixes permissions)
* Standard options to backup and restore to either the SD card or internal storage
* Mount points match those of most running roms
* adb shell works as root (with or without system mounted)
* set boot mode menu to select the boot partition (hidden on know non-multiboot bootloaders)
* setbootmode and itsmagic command line tools for advanced users
* /data/linux directory is not deleted on erase userdata, nor backed up on nandroid backup (just like /data/media) to allow a space for linux files for dual boot and chroot linux installes.
Requirements:
1. Rooted Android Device.
2. Available SuperUser
How to install CWM on Xperia neo L:
1. Download Tool : Install CWM for Xperia neo L from below.
2. Enable USB Debugging On your Smart Phone.
3. ADB(Android Debugging Bridge) Drivers should be installed on your PC.
4. Extract files of the Tool to the PC and run the file named ("install-cwm1.cmd").
5. Connect the Xperia neo L (in switch-off mode) by pressing (Back key) to the PC.
6. Follow the instructions given when you open the file mentioned above.
7. When finished Reboot your phone.
8. DONE!
9. To get into CWM recovery menu,at boot time immediately repeatedly press the Volume Down to go to the CWM menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good::good::good::good::good::good::good::good::good::good::good::good:
thx
HOW TO UNBRICK Q NOAIR A30 (Qmobile).
DISCLIMER:
If you somehow manage to damage your phone all responsibility is on you not me. Here I want to declare that I did not developed these tools I just combined them and made a tutorial.
AIM:
To help people using low end devices. So let’s begin.
REQUIREMENTS:
A computer with windows operating system.
Q Noair A30 (Qmobile).
A USB data cable.
Q Noair A30 USB drivers.
SP Flash Tool.
Download Package from
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HERE
1. Download and extract Q Noair A30 Unbrick Package at your desktop or any other comfortable place there you will find three folders.
2. Open Q Noair A30 USB drivers folder & run installDriver .exe.
3. Open SP Flash Tool folder & run flash tool .exe.
4. This screen will appear click on Scatter-loading.
5. Now this screen will appear, select MT6572_Android_scatter file from !Files_to_FlashTool folder.
6. Now this screen will appear check all the little box except PRELOADER and USRDATA and click on Download as shown in pic.
7. Now this screen will appear ignore the warning and click yes.
8. Now off your phone and remover its battery for few seconds and immediately connect it to PC via USB cable in power off condition and wait for flashing. After that this screen will appear with a green circle it means that you have successfully flashed your phone.
Congratulations!!!!!!!!!! you have done it:laugh:
NOTE:
As you have successfully recovered your phone and now if you want to install CWM on it then fallow my This tutorial.
bro can u tell us how to solve iemi error after flashing rom as i have lost my imei ... null
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards. Please
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you .
Click to expand...
Click to collapse
REQUIREMENTS:
1. Rooted Micromax bolt a068
(It can be rooted by Framaroot by using the Barahir exploit)
2. Busybox installed
(Busybox installer is available on the Play Store)
3. Windows PC with MTK and ADB Drivers installed, you can do it from PDAnet (Links are in the downloads section)
4. MTK Droid Tool
DOWNLOADS:
MTKDroidTool - http://upfile.mobi/246121.205a7c738ab251cca07417fd509f2c47
Ini file - https://www.dropbox.com/s/jvtgj1qxah6oost/MTKdroidTOOLini.zip?dl=0
PDAnet - http://pdanet.co/a
PROCEDURE:
1. Install PDAnet to install drivers. Connect ur USB with usb debugging enabled (Enable USB debugging in your phone. Go to Settings—About phone—then tap 10 times on Build number. Then Find "Developer options'' in Settings. Tick mark USB debugging on. Keep Developer options on)
Turn off antivirus for sometime if there is any.
2. Extract MTKDroidTool.rar and ini file of just 1 kb and keep them in the same folder.
Now connect your device to the computer and open MTKDroidTool.exe
Connect your switched on rooted device to your computer and open MTKDroid tool.exe, the tool will recognize your device and connect to it, if the colour indicator in the bottom left comer is green,you already have root shell,and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress bar, if the indicator stays yellow, or you get an error message, this probably means you do not have Busybox installed, you can install it from the google playstore. When the indicator turns to green you have root shell which is necessary for this operation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next click on the tab 'root, backup, recovery' and select 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to make cwm recovery auto
matically' click Yes.
Then it will ask to install created recovery on phone, click Yes.
The device will reboot now into CWM, use volume keys for navigation and power key for ok.
Hit the Thanks button if u like Suraj Lulla's work.
Flashtool Set up Guide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before set up
Make sure disable Antivirus app otherwise you unable to install Flashtool .
Required
* I recommend Flashtool v 0.9.18.6 latest version might cause some problems.
* Java runtime for Flashtool - Here
* Xperia companion for Drivers - here
* Internet Required for first time.
Let's Start
* Install all 3 apps
Install Flashtool in C:/ Drive
*After installation of Flashtool, Open C:/ drive's Flashtool>drivers folder
* Now install and run Flashtool Drivers.exe check Fast boot and and Flash mode n install.
*Now Open xperia-companion (previously Sony pc companion) and connect your phone to pc/laptop after successful connection Xperia-companion will show your phone model no this means drivers installed successfully.
* Now Run Flashtool wait few seconds And connect your device .
*To check everything goes right , open your phone settings -devloper option-mark USB debugging go back to settings-security-mark unknown sources . × Switch Off×
*Run Flashtool
Flash mode
Connect your device into pc while holding volume down- Flashtool will show device connected in Flash mode.
Fastboot mode
Connect your device into pc while holding volume up+ (device notification light will glow) Flashtool will show Device connected in Fastboot mode.
(If Flashtool log show this message means you are good to go take further steps)
Flashtool set up complete.
I tried this method in both Windows 7 and 8.No need to disable driver signature enforcement in Windows 8.I m not sure about Windows 10.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING: I am not responsible for any bricked devices, bricked windows installations or a thermonuclear war!
Click to expand...
Click to collapse
What is Eclipse Flash Tool?
Eclipse Flash Tool (EFT) is a portable program for flashing Android devices
How to use
Open the program as Administrator
When you first open the tool you will get this popup window:
You should click YES if you dont't have the following drivers installed:
MediaTek USB drivers
ADB USB driver
Samsung USB driver
If you have all of these drivers installed click NO
If you are finished with the driver installation you should see these two windows:
A CLI interface
A UI interface
In the UI interface you should see these things:
A device list and a refresh button for it
A file selection menu
A flashing type input
A flashing mode selection
A Recovery, a Flash and a Fastboot button
Two toggles at the bottom
Info: You dont necessarly need to select your device in the device list if you are using the SP Flashtool flashing mode
When you are trying to flash your device make sure its turned ON and USB Debugging is enabled
Using the flashing type
FastbootEnter the partition you want to flash on (eg.: recovery)
Odin
Select the wanted files using the "Select" button
You can use the following options for Odin if you are using an old version:
b for bootloader filea for APc for CPs for CSCu for UMS
SP Flashtool
You can use the following options for SP Flashtool:
formatdownloadformat-downloadfirmware-upgradecert-downloadefusedram-repair
Updatesv1.1
Added ADB and Fastboot terminal support (click the checkbox in the bottom-right corner to toggle)
v1.2
New UI look
Fixed some bugs
v1.3
Added ADB quick buttons (Power Off, Volume Up, Volume Down, Screenshot, Logcat), click the checkbox in the bottom-right corner to toggle
v1.4
Added more ADB quick buttons (Lock / Unlock device, Back Button, Home Button, App Switcher Button, ScreenMirror+RemoteControl[BETA])
Added APK installer and file copy field (Check both checkboxes to toggle)
v1.5
Added multiple file support for odin flash mode
Added Samsung FRP bypass option
Fixed some bugs
v1.6
Added a Toolbar
Program now displays infromation of your computer in the console
Added Reset buttor for Odin files
Fixed some bugs
TODO
Add more FRP bypasses
If you have any good ideas feel free to tell me them
Download
If I got you interested in my tool you can download it here:
Download v1.0
Download v1.1
Download v1.2
Download v1.3
Download v1.4
Download v1.5
Download v1.6
Official Website