Database Info

EASIEST WAY TO ROOT NOAIR A2_CLASSIC (Qmobile).

EASIEST WAY TO ROOT NOAIR A2_CLASSIC (Qmobile).
DISCLIMER:
If you somehow manage to damage your phone all responsibility is on you not me. Here I want to declare that I did not developed these tools I just combined them and made a working tutorial.​
BACKGROUND:
Few days back I purchased a Noair A2_Classic and found that it is one of the devices that are very difficult to root and for this you have to unlock its bootloader and install CWM first then you can root them. So I decided to find some safe and easy way and after a great effort found a method which I am going to share with you.
So let’s begin.
REQUIREMENTS:
 A computer with windows operating system.
 Q Noair A2_Classic (Qmobile).
 USB drivers.
 USB data cable.
 Download Root Package from Here
NOTE:
For this process USB debugging must enabled on you phone go to system setting\applications\development
PROCESS:
1. Download and extract Q Noair A2_Classic Root Package at your desktop or any other comfortable place.
2. Run installDriver .exe. this will install drivers for your device.
3. Run Root Genius V1.9.6 .exe. and connect you cell to PC via USB data cable and click Next.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Now this screen will appear.
5. After successful connection tool will recognize your phone as shown in pic now click on Quick Root button.
6. After that root process will begin as shown in pics and during it your phone will be restarted.
7. After successful completion of root process this screen will appear.
8. Now install Busy Box and Root Checker apps and check root & busy box access via Root Checker.
Congratulations!!!!!!!!!! you have done it
NOTE:
As you have successfully rooted your phone and now if you want to install CWM on it then fallow my this tutorial.

Karbonn A35: How to flash stock ROM and root

Last week, I wanted to revive an old phone, Karbonn A35 as the system partition was infected with Ghost Push. Since I couldn't find any online tutorial, I decided to create one myself.
Disclaimer: Know and understand each step before doing it. I'm not responsible for any bricked device.
Things you will need:
1. Your Karbonn A35 Smart-phone.
2. A PC with Linux/Windows.
3. SP Flash Tool (Download from here).
4. Karbonn A35 Stock ROM (Download from here).
5. USB Drivers for the smart-phone installed (Click here for instructions).
6. Latest Framaroot apk for rooting. (Get it from here).
Instructions for flashing stock ROM on Karbonn A35
1. Download the required ROM and software and extract them in a folder.
2. Disconnect your phone, switch it off and remove the battery.
3. On your PC, run the sp-flash tool and in the second field (Scatter Loading File), select the file firmware/MT6572_Android_scatter.txt from the ROM zip extract folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. In the dropdown below that, change from "Download Only" to "Format+Download".
5. Click the green Download button on top.
6. Now connect the phone (without battery) to the PC through USB cable.
7. You will see that as soon as you connect, the new ROM starts flashing on your phone.
8. Once done, you will see a large green icon for success.
9. Now close the SP Flash tool, disconnect the phone, insert the battery and start it.
10. Done! :good:
Instructions for rooting Karbonn A35
1. Connect the phone to PC and transfer the framaroot APK to SDCARD.
2. On the phone, go to Settings->Developer Options->Security and turn on the Unknown sources setting if not done already.
3. Install the framaroot APK on the phone.
4. In the app, click on Install SuperSU and try the exploits one after the other.
5. Once the exploit works, restart the phone.
6. You are now root!:good:

[Noob friendly] Simple Flashtool set up Guide for any Windows version

Flashtool Set up Guide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before set up
Make sure disable Antivirus app otherwise you unable to install Flashtool .
Required
* I recommend Flashtool v 0.9.18.6 latest version might cause some problems.
* Java runtime for Flashtool - Here
* Xperia companion for Drivers - here
* Internet Required for first time.
Let's Start
* Install all 3 apps
Install Flashtool in C:/ Drive
*After installation of Flashtool, Open C:/ drive's Flashtool>drivers folder
* Now install and run Flashtool Drivers.exe check Fast boot and and Flash mode n install.
*Now Open xperia-companion (previously Sony pc companion) and connect your phone to pc/laptop after successful connection Xperia-companion will show your phone model no this means drivers installed successfully.
* Now Run Flashtool wait few seconds And connect your device .
*To check everything goes right , open your phone settings -devloper option-mark USB debugging go back to settings-security-mark unknown sources . × Switch Off×
*Run Flashtool
Flash mode
Connect your device into pc while holding volume down- Flashtool will show device connected in Flash mode.
Fastboot mode
Connect your device into pc while holding volume up+ (device notification light will glow) Flashtool will show Device connected in Fastboot mode.
(If Flashtool log show this message means you are good to go take further steps)
Flashtool set up complete.
I tried this method in both Windows 7 and 8.No need to disable driver signature enforcement in Windows 8.I m not sure about Windows 10.

[Completed] error occured during flashing stock rom in k5 plus

Sahara fail error occurred in lenovo k5 plus...

XDA Visitor said:
Sahara fail error occurred in lenovo k5 plus...
Click to expand...
Click to collapse
i have not tried this method but this is what i could come across while searching in xda forums....
you may also register yourself at XDA and search more or check this thread http://forum.xda-developers.com/android/general/unbrick-vibe-k5-plus-qfil-qpst-method-t3467830
IMPORTANT : First of all you should always have all the drivers installed on your PC.
READ EVERYTHING CAREFULLY AND MAKE SURE YOU HAVE FOLLOWED THE STEPS CAREFULLY AND THEN POST QUERIES.[/COLOR]
The following drivers are needed for this task:
1. Lenovo USB Drivers.
2. QDLoader QFIL Drivers
Search for them on google and you will find them very easily. Most of the time they are there in the stock rom zip folder under a folder named Drivers.
Install all of them.
1. Download the Stock ROM you need for your phone from here:
DOWNLOAD STOCK FIRMWARE (Thanks to Shreps)
2. Extract the above zip to a folder. You will get three folders: Drivers, Images and Tools.
3. From the Drivers folder, Install all drivers.
4. From the Tools folder, install the QPST Tool. In your Start Menu it will come as QFIL. Don't worry about that.
5. Power Off your device.
6. Open QFIL TOOL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Now On top you will see two options: 1. Flat Build 2. Meta Build
Select FLAT BUILD
8. In "PROGRAMMER PATH" click Browse and go to the folder named Images and select the one file it displays (something like prog_emmc....mbn).
9. Now click "Load XML" and select "rawprogram0.xml" file and then another dialog box will open. Here select "patch0.xml".
PC WORK IS DONE. DO NOT CLICK DOWNLOAD.
Your device should be switched off.
NOTE CAREFULLY: Hold "VOLUME UP + VOLUME DOWN" key (Do not press POWER button). and connect the USB Cable from PC to the phone.
Your phone should now display RED LED LIGHT and the QFIL Tool should now change from NO PORT to QUALCOMM.....Something like that.
You are now ready. Click on Download button on QFIL TOOL and then wait for atleast 15 minutes.
After the dialog at bottom shows "DOWNLOAD SUCCESSFUL" in blue color, UNPLUG your device. Wait for a few seconds or a minute and then POWER ON your device.
First boot takes about 8-10 minutes.

[Recovery] [SP FLASH TOOL]TWRP v3.0.0.3 - Lenovo K3 NOTE [100% Working]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing custom recovery TWRP on K3 Note using SP Flash Tool (TUTORIAL With VIDEO)
Download Link [SP FLASH TOOL + TWRP v3.0.0.3 + USB Drivers] :- http://viid.me/qr1zo5
First, get your PC ready:
1. Download and Install "LenovoUsbDriver_v1.1.13.exe", then Restart pc.
2. Download and extract "SP_Flash_Tool_exe_Windows_v5.1452.00.000.zip" using Winrar
3. Open SP Flash Tool (Double click on flash_tool.exe from inside the SP Flash Tool folder)
4. Go to Options > Option... > Download > Tick "DA DL All with Checksum" > Close the options box
5. Close SP Flash Tool
Now, the flashing part:
1. Download and Extract "TWRP_v3.0.0-3_for_SP_Flash_Tool.zip" *
2. Open SP Flash Tool, and From "Download" Tab click on "Scatter-Loading"
3. Browse the TWRP v3.0.0-3 folder and select the "MT6752_Android_scatter.txt" file > Ok **
4. Click on "Download" icon
5. Completely turn off your phone (BUT DO NOT REMOVE BATTERY) and connect it to PC using usb cable.
6. Wait till the Process completes and a "Download ok" box will appear with a green tick. Disconnect the phone from cable.
Done!
Now press and hold VolumeUp+VolumeDown+PowerButton all three buttons at one untill you see the "TWRP" logo.
The phone will boot into custom recovery you just installed.
VIDEO TUTORIAL​https://www.youtube.com/embed/3YS_L1BVpMs​
** You can also flash ROW/CUSTOM roms (which are made ready for SP FLASH TOOL) using this method. For that, Just select the scatter file inside the ROM folder
Thank You !!​​