Related
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
masse1369 said:
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
Click to expand...
Click to collapse
Sure just got yesterday. In fact it covers all of the glass portion of the screen. For reference there is no reduction in touch sensitivity with the protector in place.
While I think the cost is high, Martin Fields protectors have always been high quality. This is no exception.
Awesome news! Thanks for the reply!
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...? http://www.martinfields.com/US/prod...oogle_Nexus&modeln=Nexus One&prod_type=screen
uansari1 said:
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...?
Click to expand...
Click to collapse
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Ugh, I want to put down for this sheild but the only thing holding me back is it's not whole body protection!
Thank you for your review! I doubt anyone will have a problem with as details are what matters
Also can you include some random pictures from the Nexus with the Martin Fields Protecter on the camera? I saw the one on their page but i'm always skeptical
It sucks ! had one and started pelling after a week, I keep my phone in my pocket.....now I have invisible shield and THAT one holds.
xavina said:
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Click to expand...
Click to collapse
Thanks so much for your thorough review. Two things though... first, can you please take a pic of the screen for us, especially showing how the fitment is? I believe you when you say it's just barely short, but am just curious. Second, I'm glad to know I'm not the only one who noticed a change in the proximity sensor with these thicker skins.
I'll almost certainly be ordering this product it looks like. One more thing... does it have a guarantee or anything?
Edit: Found this review with installation tips... seems to be just like a Seidio screen protector.
http://the-gadgeteer.com/2004/01/05/martin_fields_overlay_plus_pda_screen_protector_review_/
I've attached a few pictures of the phone and a few taken from the Nexus One
Screen protector
I tried to get as close as possible to the screen to show the edges (Don't mind the Skinomi skin lol).
The one of the camera protector seems clear, but there is one section that is discolored to the rest, that'll be the place I bent lol (bottom half when looking at the picture I took).
Pictures taken from the Phone
There are 2 pictures taken with the phone; one normal and one using the zoom feature.
The picture of the plants are closer, in mid/low light.
The picture of the mountain is further away and in bright light. It's not exactly clear because it's rainy/misty today, sorry for that one.
The last pair is of a magazine in little-no light using the flash as the only source of light.
Warranty
Regarding the warranty, I didn't see mention of anything so I can't really say. If I find anything, I'll be sure to post it.
Thickness
To me, it seems slimmer than the Skinomi Skin because I can feel it almost flush to the metal but it might be my imagination.
I can only upload 8 at a time, so I'll post the others in another post.
These are the remaining photos I took from the phone.
Wow... the fitment looks perfect man. Thanks very much for the pics. Still waiting to hear from Seidio, but this is the front runner. I'll order a new one this week. By the way, I'm jealous that you live near mountains.
Haha, yeah, living in Hawaii has its perks. Wish I could have taken more pictures but I just figured I'd get something posted asap.
If anyone would like to see any specific pictures/angles, I'd be happy to oblige. Like I said though, the camera I have isn't exactly great so quality is kind of lacking.
I'll post again later though seeing how someone had an issue with the protector peeling. I also put my phone into my pocket, so we'll see if it collects lint, peels, etc. So far, my Skinomi seems to be acting like a lint magnet so that may skew results lol.
One last thing of note, I've been hearing word that Martin Fields uses a mild adhesive. With this protector, I guess it's possible that a really mild adhesive is used but I know for sure it's static; depending on which side I'd place a strip of tape close to it, it would actually pull or push the tape in a certain direction. It didn't really feel sticky but I could definitely tell which side needed to be placed on screen; it wasn't smooth on one side.
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
tehkseven's review of martin fields vs dcmugen (generic)
Bicster_ said:
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
Click to expand...
Click to collapse
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
laughter95 said:
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
Click to expand...
Click to collapse
Link to dcmugen?
uansari1 said:
Link to dcmugen?
Click to expand...
Click to collapse
His ebay seller ID is dcmugen88
Thanks, will order some dcmugen88 product. The material sounds the same. His 5 pack is cheap! If it works ok I'll have a new protector every month instead of every year, lol.
I too just ordered (2) of the Anti-Glare ones from dcmugen for $4.49 shipped.
I will report back once I receive it and will give a review.
Just a follow up review, now that I've had the protector on for a little while.
I usually keep my phone in my shirt pocket but I decided to mix it up and
Throw it into my pants pocket (with keys) for the purpose of this review.
Looks
Still very impressed by the looks of the protector. Nothing has changed that
I can tell; no peeling effect, no lint collection (again, could be due to skin
protector lint collection lol).
Scratching
Haha, as mentioned by another reader, this protector does indeed scratch.
Now, here's the funny thing: It didn't scratch due to my keys, but rather my
cleaning cloth.
Some cleaning cloths burn the edges and while I'm usually
careful with those, I figured if this thing has been taking my keys, it should
be able to hold out; not the case.
It's a very deep scratch, so much so that I can feel it under my finger.
The cool thing is though, I cannot see the scratch under normal circumstances.
I can't feel it under normal use either.
Seriously though, I can't even see the scratch under daily use.
Only by flashing direct light can I see the scratch, and by moving my finger
slowly over it can I feel it.
Note: scratch is maybe 1/8th of an inch long.
Clarity
Screen still displays beautifully and pictures are still awesome.
Cleanliness
Still remains pretty clean throughout a few days, only wiping it down every
two or three days. Pretty darn good I guess.
Conclusion
While I'm sort of sick that it got scratched, it's so unnoticable that I haven't
felt the need to replace it. Don't know how long it will last, but if ever
I decide to replace it, I'll post again and give the reasons why.
I'm still quite pleased with this protector and I don't think I'll ever use
anything besides these static cling protectors (be it Martin Fields or another).
hey Xavina. Are you near kea'ahala pl? looks like the pictures are taken from my old house almost haha.
Nevermind. But the bkgrnd is close.
[/IMG]
My old driveway. Anyways off topic ... carry on.
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
I don't use them ...
farwish said:
http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
Click to expand...
Click to collapse
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
I get where you're coming from Peter but just because you don't want screen protectors doesn't mean you shouldn't try and contribute to someone who does. My Captivate had gorilla glass and it has plenty of scratches just because of grit. It happens, no matter what.
However, Ultra Fine is just going to be super clear, and Ultra Oleophobic will do it's best to keep finger prints from showing/building up.
PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
grinmaul said:
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
Click to expand...
Click to collapse
ditto here. i noticed the other day i had a tiny scratch up near the ear piece of my GNex. mine has never been dropped so not sure where i got it from but it was the first phone i went completely naked with. won't make that mistake again. def getting a screen protector and most likely the SGP Oleo.
PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
nabbed said:
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
Click to expand...
Click to collapse
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy. Many people don't believe in screen protectors. I live in sandy Florida and I've been just fine. My friend on the other hand scars his screens.
vioalas said:
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy.
Click to expand...
Click to collapse
True, its all a matter of personal choice. There is a tiny change in the feel when you use a screen protector, and some don't like it. If a person chooses not to use a screen protector, and willing to live with scratches (if they do occur) then that's totally up to them. If someone scratches the screen, and claims the GG as "defective", then I suppose that is irresponsible (as there is not advertised guarantee against scratches).
That said, GG is far from impossible to scratch. Its intended to be scratch resistant, but can still be scratched (and even cracked). Coming from another device with GG, I can tell you that I have seen many cases of people that got scratches after normal use, and no obvious instances of abuse, drops, etc. And if you remember when the iPhone first came out with GG, there were also plenty of instances of people getting scratches almost immediately after release. On the other hand, plenty of people have had good luck with no scratches on GG, even after serious drops, etc. A bit of luck is certainly at play. But if you don't use a screen protector, and end up with a scratch, you can't easily undo it. IMO, its better to use a protector, and not have to worry about such regret.
A good quality screen protector has very minimal change in feel (although there is a very slight difference) no change in look, and will also attract fingerprints and smudges a bit less than the "naked" screen. Cheap ones are not worthwhile, and often look and feel much worse, and can start peeling off easily. Some people that are against protectors, may be due to experience with a cheap one. Bodguardz and Skinomi are quality ones that I have used, and there are plenty of other good ones.
Hey guys, this topic was started to answer a mans question about the difference between two types of screen protectors not borosilicate and gorilla glass. I feel that this topic should be A. closed if nothing good is to be added, or B. put back on topic for the benefit of OP.
okay, i'll knock his question out really quick...
the Ultra Fine (Anti-fingerprint) is a matte type of screen protector. because it is matte, it's going to degrade the colors a little bit. they won't be as vibrant as without this particular protector.
the Ultra Oleo is a clear screen protector. approx 100% of the colors will still come through as if you didn't have this one on. it's made to be resistant to fingerprints, though the Ultra Fine is going to do a far better job of keeping fingerprints off.
so, you have to ask yourself this...
do you mind losing some of the pop from the colors to keep fingerprints off of your screen, or would you rather see your display like there was nothing on it but have more visible fingerprints?
i always go with the clear ones. i had a matte protector on an old iPhone (3G?) and didn't like it. haven't had a matte one since.
Its a bit hidden, but it says on the product webpage FAQs:
What are the differences between the Steinheil Ultra Fine and Ultra Oleophobic Screen Protectors?
All of our screen protectors are Japanese made, enhanced optical hard films. The Ultra Oleophobic screen protectors is a clear type where it absolutely doesn't affect the screen image quality. Ultra Oleophobic has an oil resistant coating to resist oil and other contaminants. Ultra Fine screen protector is matte type hard film which resists against fingerprints and smudges, but it is less clear compared to other Steinheil screen protectors.
So it seems the main difference is that the Oleophobic seems to be the "regular flavor", while Ultra Fine has a matte finish (and $2 more). What is "best" for matte versus regular finish is typically a matter of preference. Matte tends to give less glare (and might be helpful outdoors in sunlight) but tend to be less clear, and may have a tackier feel or even textured feel (not sure if the different feel is true for this particular brand). Hopefully somebody with specific experience with this brand can give an opinion.
Some people (like the previous reply) don't like matte; while I've seen others that seek it out.
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
http://forum.xda-developers.com/showpost.php?p=25084817&postcount=69
there ya go vioalas, that's the skinomi protector, and it's a wet app so it's just like, the best fit possible. Hope that helped!
vioalas said:
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
Click to expand...
Click to collapse
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
s.m.knipe said:
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
Click to expand...
Click to collapse
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
mrvirginia said:
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Any other places to get these now that fit.. Dry and not $16
s.m.knipe said:
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Click to expand...
Click to collapse
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
mrvirginia said:
guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
The wet apply protectors are not as scary as they would seem. Your lightly spray the application fluid onto the protector, and its really not enough to penetrate into any cracks. And even if it does, its not enough to short circuit anything. Have the device powered off, and let it dry for the recommended time, and you will be fine.
I used dry apply protectors for my first couple smartphone, as I was also a bit wary of the wet apply method. But when I finally went the wet apply method, I found it easier to install. The wet method give you some time to get the protector perfectly in place before the protector adheres.
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
mrvirginia said:
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
Click to expand...
Click to collapse
I have a Skinomi installed on my Flyer tablet, and am quite pleased with it. its very smooth with no noticeable orange peel effect.
I guess I'll do the wet application. Would you guys trust the radioshacks/bestbuys that offer to apply it for you?
Since this was my first install of a glass screen protector, I didn't know what to expect. I was glad to find out that the install process seemed easier than any InvisibleSHIELD I've done in the past. The results are great so far. No bubbles and the screen is beautiful.
I have tons of cases laying around so I'll add to this post and give a run down of how things go.
Verified OKAY
Spigen Slim Armor
Incipio DualPro SHINE (a little tight... place 1st layer on perfectly before slipping into outer layer)
Speck CandyShell
Trident Aegis Series (doesn't fit 100% perfectly on top edges... still okay)
Not Working
Seidio SURFACE (aka Platinum / PT Best Buy Case) - Will not close completely.
EDIT:
Reply to member questions...
Thanks! Great video...I may have to pick one up.
Sent from my Nexus 10 using xda app-developers app
Just picked up the Spider GLAS. Trying screen protector which is thinner than the GLAS. t. Couldn't be happier with the case, plus it doesn't interfere with my incipio case. Perfect solution for anyone looking for a screen protector.
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
flu13 said:
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
Click to expand...
Click to collapse
You are correct sir!
Thanks for the video, I'm waiting for my Mime glass screen protector to come in. I'll try to add the aluminium button in before the screen install.
levaryw thought
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
vdanasto said:
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Click to expand...
Click to collapse
Oops. Before making another video, I must have just skimmed over your question. It appears to work fine on the lock screen. Which version did he have? GLAS.t or GLAS.tr?
flu13 said:
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Click to expand...
Click to collapse
It was actually the supplied jelly bean button. It only took some time because I used the alignment around the home button to determine where to drop the GLAS onto the surface pretty much. That and focusing on the sides more than the top. Also, I thought there was a huge bubble down there initially as well. It was the plastic protector though.
screwdestiny said:
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
Click to expand...
Click to collapse
I looked at the product quickly and it appears to have a larger opening up top. Since this case really hugs the device, that becomes an issue for the Spigen GLAS.
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
galaxy808 said:
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
Click to expand...
Click to collapse
Oops. Usually I give the video a quick one time over. Must have missed it.
Since I pay for 99% of the stuff seen, and it is my phone, I have to make a choice. Do I make a video and sacrifice a lousy install, or do I poke my head in the shot .
I think they might leave those areas open to ensure they function correctly. It does cover the front facing camera though. If you look at the protector the poster a few above was talking about.... It doesn't appear to cover much of the top at all.
As long as you're rocking something, it's better than nothing. I thousand knives can't damage Gorilla glass, but 1 penny sharing space in the same pocket sure can lol.
yeah I think I prefer the glas.t over the TR just because it's thinner can looks more like nothing's on than the TR with the beveled edges.
I may get it eventually maybe if they have a father's day sale lol, like the 20% off memorial day.
I'm still digging this product. I have some Chinese glass screen protectors, but I'm going to have to give them away for user submitted reviews.
I can't get myself to take the Spigen off the S4.
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Great video. Thanks for sharing! I love SPIGEN products.
Thx for your video. It will help me so much
Ryukouki said:
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Click to expand...
Click to collapse
Not really. I use a case on it always though.
You can feel the edges of the glass if you're moving it around, but if you just place the phone directly up to your ear, you won't notice anything.
It is my pleasure to provide the videos. Thanks for watching.
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
eyecon82 said:
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
Click to expand...
Click to collapse
The phone hasn't been put through a lot of use to date, however as of this weekend my wife is giving up her iPhone 5 and using this regularly. We have a newborn baby and she will be carrying that thing in her purse and back pocket most of the time.
If there are issues, she should be able to get them to appear! I'll report back if anything happens.
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.
I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market
niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)
sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk
suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.
sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.
Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).