what the different with those screen protectors? - AT&T, Rogers HTC One X, Telstra One XL

http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks

I don't use them ...
farwish said:
http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
Click to expand...
Click to collapse
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter

I get where you're coming from Peter but just because you don't want screen protectors doesn't mean you shouldn't try and contribute to someone who does. My Captivate had gorilla glass and it has plenty of scratches just because of grit. It happens, no matter what.
However, Ultra Fine is just going to be super clear, and Ultra Oleophobic will do it's best to keep finger prints from showing/building up.

PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin

grinmaul said:
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
Click to expand...
Click to collapse
ditto here. i noticed the other day i had a tiny scratch up near the ear piece of my GNex. mine has never been dropped so not sure where i got it from but it was the first phone i went completely naked with. won't make that mistake again. def getting a screen protector and most likely the SGP Oleo.

PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.

nabbed said:
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
Click to expand...
Click to collapse
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy. Many people don't believe in screen protectors. I live in sandy Florida and I've been just fine. My friend on the other hand scars his screens.

vioalas said:
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy.
Click to expand...
Click to collapse
True, its all a matter of personal choice. There is a tiny change in the feel when you use a screen protector, and some don't like it. If a person chooses not to use a screen protector, and willing to live with scratches (if they do occur) then that's totally up to them. If someone scratches the screen, and claims the GG as "defective", then I suppose that is irresponsible (as there is not advertised guarantee against scratches).
That said, GG is far from impossible to scratch. Its intended to be scratch resistant, but can still be scratched (and even cracked). Coming from another device with GG, I can tell you that I have seen many cases of people that got scratches after normal use, and no obvious instances of abuse, drops, etc. And if you remember when the iPhone first came out with GG, there were also plenty of instances of people getting scratches almost immediately after release. On the other hand, plenty of people have had good luck with no scratches on GG, even after serious drops, etc. A bit of luck is certainly at play. But if you don't use a screen protector, and end up with a scratch, you can't easily undo it. IMO, its better to use a protector, and not have to worry about such regret.
A good quality screen protector has very minimal change in feel (although there is a very slight difference) no change in look, and will also attract fingerprints and smudges a bit less than the "naked" screen. Cheap ones are not worthwhile, and often look and feel much worse, and can start peeling off easily. Some people that are against protectors, may be due to experience with a cheap one. Bodguardz and Skinomi are quality ones that I have used, and there are plenty of other good ones.

Hey guys, this topic was started to answer a mans question about the difference between two types of screen protectors not borosilicate and gorilla glass. I feel that this topic should be A. closed if nothing good is to be added, or B. put back on topic for the benefit of OP.

okay, i'll knock his question out really quick...
the Ultra Fine (Anti-fingerprint) is a matte type of screen protector. because it is matte, it's going to degrade the colors a little bit. they won't be as vibrant as without this particular protector.
the Ultra Oleo is a clear screen protector. approx 100% of the colors will still come through as if you didn't have this one on. it's made to be resistant to fingerprints, though the Ultra Fine is going to do a far better job of keeping fingerprints off.
so, you have to ask yourself this...
do you mind losing some of the pop from the colors to keep fingerprints off of your screen, or would you rather see your display like there was nothing on it but have more visible fingerprints?
i always go with the clear ones. i had a matte protector on an old iPhone (3G?) and didn't like it. haven't had a matte one since.

Its a bit hidden, but it says on the product webpage FAQs:
What are the differences between the Steinheil Ultra Fine and Ultra Oleophobic Screen Protectors?
All of our screen protectors are Japanese made, enhanced optical hard films. The Ultra Oleophobic screen protectors is a clear type where it absolutely doesn't affect the screen image quality. Ultra Oleophobic has an oil resistant coating to resist oil and other contaminants. Ultra Fine screen protector is matte type hard film which resists against fingerprints and smudges, but it is less clear compared to other Steinheil screen protectors.
So it seems the main difference is that the Oleophobic seems to be the "regular flavor", while Ultra Fine has a matte finish (and $2 more). What is "best" for matte versus regular finish is typically a matter of preference. Matte tends to give less glare (and might be helpful outdoors in sunlight) but tend to be less clear, and may have a tackier feel or even textured feel (not sure if the different feel is true for this particular brand). Hopefully somebody with specific experience with this brand can give an opinion.
Some people (like the previous reply) don't like matte; while I've seen others that seek it out.

Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.

http://forum.xda-developers.com/showpost.php?p=25084817&postcount=69
there ya go vioalas, that's the skinomi protector, and it's a wet app so it's just like, the best fit possible. Hope that helped!

vioalas said:
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
Click to expand...
Click to collapse
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...

s.m.knipe said:
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
Click to expand...
Click to collapse
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.

mrvirginia said:
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.

Any other places to get these now that fit.. Dry and not $16

s.m.knipe said:
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Click to expand...
Click to collapse
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.

mrvirginia said:
guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
The wet apply protectors are not as scary as they would seem. Your lightly spray the application fluid onto the protector, and its really not enough to penetrate into any cracks. And even if it does, its not enough to short circuit anything. Have the device powered off, and let it dry for the recommended time, and you will be fine.
I used dry apply protectors for my first couple smartphone, as I was also a bit wary of the wet apply method. But when I finally went the wet apply method, I found it easier to install. The wet method give you some time to get the protector perfectly in place before the protector adheres.
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
mrvirginia said:
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
Click to expand...
Click to collapse
I have a Skinomi installed on my Flyer tablet, and am quite pleased with it. its very smooth with no noticeable orange peel effect.

I guess I'll do the wet application. Would you guys trust the radioshacks/bestbuys that offer to apply it for you?

Related

Realook Screen Protection (5 stars)

Just ordered and installed Realook screen protectors and I couldn't be more pleased. I have used other screen protection from Zagg and Sprint and I did not like them nearly as much. I will do my best to describe what its like but you really need to see it in person.
Feel:
The material is a firm plastic that when applied feels nearly the same as the bare glass. I did not like Zagg because it felt soft and textured like an orange peel. This stuff is 95% the same feel as glass and I waited 20 days before installing it, so I have a good level of comparison.
Look:
Clear as glass. I have not yet tested what effects it has on glare, but there is no noticeable difference indoors. Also it is ready to go 30 seconds after installing. All you need to do is push out the large air bubbles. It doesn't take 1 or 2 days to settle like some other protectors. Other people in this thread reported a rainbow reflection in the sun light when the screen is off.
Installation:
Before I started I ran the shower on hot to fill the bathroom with some steam to settle the dust. There is nothing that will bother me more than a single spec of dust under a screen protector, I will obsess about it to no end. Due to my rough and dry hands I am a dust machine and I have never failed to get at least 1 piece of dust under every screen protector I have installed. This time was no different. I mis-aligned the screen on installation and had to peel it back, when I did 1 spec of dust planted itself. I used a piece of tape they include in the box to peel back the screen, and another piece of tape to pull off the dust and it was clean. I am sooo happy about this point. Other protectors I used with adhesive would grab onto dust and never let go. Since it does not use adhesive so it is easy to put on and peel back off if you made a mistake.
The Bad:
Back button less responsive. It will still work on the first touch every time, but you do need to touch a little harder than before.
Box Includes:
2 screen protectors.
1 Wet wipe
1 Plastic card to push out air
2 pieces of tape(if needed)
1 microfiber cloth(to clean the screen before and after installation)
Sorry for the slightly blurry photos. Taken with another Epic4G and it doesn't like to focus on close ups.
$11 at Amazon
does it make the screen fuzy?
Perfectly clear. I wish I had a better camera to show it.
edit: I just discovered macro mode in the camera settings. I will post more photos soon.
Returned the Sprint speckled ones that was degrading display quality to the local Sprint store and am awaiting delivering of Realook for both Samsung Epic and Panasonic GF1 camera. Realook sounds like the best option and value out right now for the Epic until Steinheil Ultra Oleophobic is made available for comparison.
a holes wouldnt take mine back
+1 for Realook! Best screen protector i have used. Same experience as Pops.
I also went to Realook after Skinomi. Love Realook! Slick, smooth feel like the original glass. Relatively easy to apply. No screen degradation. Wonderful, all around.
does no opening for cam hinder it?
Anyone want to trade their spare ReaLook for a pair of PhantomSkinz screens?
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
churro7 said:
does no opening for cam hinder it?
Click to expand...
Click to collapse
Doesn't seem to. It is pretty optically clear. With 640x480, you probably wouldn't notice if there was any difference anyway.
tonysohn said:
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
Click to expand...
Click to collapse
I agree with all of those. I only have a gap on the bottom, though. Left and right seem to be exact.
I see the rainbow effect but it doesn't seem to cause any problem for me. I really don't notice it unless the display is off.
I do have the less responsive buttons, especially the back button. I'm wondering if I could slice off the bottom centimeter of the protector smoothly enough to make it worth trying.
Jason
I like it, but...
It's harder to clean than the Gorilla Glass of the Epic. It also has more friction than the Gorilla Glass. Your fingers won't glide across it as effortlessly. Finally, it has slightly rough edges that you can feel.
I should sell my unused RL screen for 5 bucks or something. Do people typically do that with their unused protectors?
Just ordered mine from amazon after reading this thread, i hope it is as good as you say it is. I have used Zagg a few times before, and Skinomi twice, and BodyGuardz on my nexus one. my favorite was BodyGuardz, but for 10 bucks i think it is worth trying this one. ill give feedback when it gets here in a few days.
If anyone wants another (good) opinion, here's a review from ppcgeeks.
I posted my review on realook a while back on ppcgeeks. Best protector ever IMO. http://forum.ppcgeeks.com/sprint-ep...king-screen-protector-tips-4.html#post1942030
Post #34
Sent from my SPH-D700 using XDA App
i use skinomi very nice and slick
I might give real look another chance but I used one on my touch pro 2 for a few months it looks and feels absolutely great however when i took it off today there was definitely some residue left behind. Swiping on the screen was not as smooth as when i first bought it. I just got my epic today and blew the installation of the clarivue protector. I don't think reallook has no adhesive, I think it has some adhesive so before I give them a try again i am gonna try boxwave and clarivue 1 more time.
the best protector IMO
I agree that the Realook protectors are the best. I installed mine a week ago and i'm really liking it. The look is awesome, the fit is perfect and it doesn't really have much more drag then the naked glass. The one issue is the fingerprints and oil residue. I can tell you that the phone is much more difficult to keep clean with the Realook, but that's not big of a deal. I used to just use my shirt or pants to wipe the phone clean, and now i have to use a microfiber. Even then it takes about two to three times the effort to get the oils off. I would still recommend this product.
I just got my real look in today (ordered thursday night) and i have a 10% off coupon code if anyone plans on getting one via amazon before the 30th.. pm me if anyone wants the code...
ordered from same link the OP posted $11 shipped so coupon will drop a buck off.. nothing much but I figured id throw it up here
UPDATE:the coupon is spoken for.
Ok i need to first say Pops_G you rock for informing me about this screen protector, and your method with the shower was genius, wish i did that when i installed all the other screen protectors in my past. On to my experience...
I just got the Realook Screen protector today, and i previously stated in a prior reply, i have tried zagg invisible shields, BodyGuardz ( OLD FAVORITE ) and Skinomi. The application of the Realook Screen protector was hands down, the Easiest ever, i didn't think it could go that fast. And in terms of how it looks and feels, I could not believe my eyes. You seriously cannot tell when looking at the screen that there is a protector on there. Zagg, Bodyguardz, Skinomi all have, in some regard, no matter how small, a orange peel effect, where there are small ripples in the screen from the water that is used in the installation process, they go away in time, but it is slightly noticeable. They also feel rubbery and take away from the graceful movements of the screen. Plus you have to turn off the phone, pull batter, use a water/soap spray mixture, worry about air bubbles, let it dry 24 to 48 hours, and wake a week plus for the solvent to evaporate. I had this Realook applied in 5 minutes, it would of been less, but i was super anal about making sure not a spec of dust was on the screen. lol.
Now this is just my first impression, after a hour or so of use. It is plastic which makes it feel very much like the original screen, although im sure that will allow the screen protector to scratch, unlike zagg, bodyguardz, and skinomis rubber film where they wont, unless you really try. And also it does show the finger oils more than the actual glass does. I am ok with this becasue that is the purpose of the protector, to get scratched and not the actual screen, Plus i have a backup because 2 came in the pack. GREAT DEAL. Second, i only see this screen protector working for phones that have a completely flat screen and have some sort of small lip around the phone. For Example: I dont think it would work best on a palm pre, which has no lip, and then it could be more easily peeled off down the line. But for the Epic 4g... Seriously im in love.
Thanks again Pops_G

The Screen guards for Note 8.0

The Note 8.0 doesn't come with anything like a Gorilla Glass. So I guess, a ScreenGuard would be pretty important, especially for Guys who carry the 8.0 everywhere. So post your experiences, recommendations here for everyone to see.
P.S. The Note 8.0 is yet to be launched in my country(India), but eBay is already full with 2-3 dozen listings for Scratch guards ranging anywhere between 5-20 USD!!
Sent from my Spice Mi-310 using XDA
agambhandari said:
The Note 8.0 doesn't come with anything like a Gorilla Glass. So I guess, a ScreenGuard would be pretty important, especially for Guys who carry the 8.0 everywhere. So post your experiences, recommendations here for everyone to see.
P.S. The Note 8.0 is yet to be launched in my country(India), but eBay is already full with 2-3 dozen listings for Scratch guards ranging anywhere between 5-20 USD!!
Sent from my Spice Mi-310 using XDA
Click to expand...
Click to collapse
While Samsung doesnt explicitly advertise it, there is certainly some sort of treated glass on the Note 8. The glass is comparable to the glass on the Note 2 both in thicknesses and hardness. I tested on one of the bank's test units and it can certainly take abuse, even so far as resisting scratches from coarse granite.
Sent from my GT-N5110 using Tapatalk HD
robyr said:
While Samsung doesnt explicitly advertise it, there is certainly some sort of treated glass on the Note 8. The glass is comparable to the glass on the Note 2 both in thicknesses and hardness. I tested on one of the bank's test units and it can certainly take abuse, even so far as resisting scratches from coarse granite.
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Thats good to know. Though I wonder why Samsung would choose to do so?
Even if doesn't want to pay royalties to Corning for the Gorilla Glass, at least it could write "scratch resistant glass" in its specs.
Would certainly improve our impression of the build quality of the Note8.
robyr said:
While Samsung doesnt explicitly advertise it, there is certainly some sort of treated glass on the Note 8. The glass is comparable to the glass on the Note 2 both in thicknesses and hardness. I tested on one of the bank's test units and it can certainly take abuse, even so far as resisting scratches from coarse granite.
Click to expand...
Click to collapse
That really is bizarre that Samsung doesn't seem to mention anything about the quality of the glass--that seems like a big oversight on their part! It is good to hear your first-hand experience though--that is encouraging!
Perhaps at some point you or others could give a more detailed analysis of the glass quality, specific abuse it can withstand, etc.?
Even Gorilla Glass can be scratched from normal usage (as numerous reports by XDA users on various devices will attest). So don't take for granted that treated glass or GG makes your screen impossible to scratch.
Many people prefer the feel of going bareback with no protection, which is understandable. And its certainly a matter of preference. But its a simple fact that once you do scratch it, it really can't be undone. So if you are worried about scratches, better to protect it now, and not have to regret it later.
As far as what protector to buy, my recommendation would be to avoid the cheap ones. They tend to scratch easily, attract fingerprints, and you will be lucky to get them to last a couple months. Get a quality one in the $20 US range, as these are typically very difficult to scratch, actually attract less fingerprints and grime than the bare screen, and last a long time. I've had good quality protectors on my phone and my old tablet, that have been on for a year of more, and still look great. So in terms of durability and sheer quality, buying a good quality protector really pays off. Also, the wet apply type is much easier to install than dry.
Not sure what brands are available in the OPs home country. But I've had good luck with Skinomi and Zagg, but there are other high quality brands, as well.
redpoint73 said:
Even Gorilla Glass can be scratched from normal usage (as numerous reports by XDA users on various devices will attest). So don't take for granted that treated glass or GG makes your screen impossible to scratch.
Click to expand...
Click to collapse
+1 to your opinion. Have seen some Gorilla glasses scratched.
Regards to applying, I would actually from a brick-and-mortar mobile shops, those guys are real experts at applying these.
Also, can anybody tell me the effect of the screen guard on the S-pen experience. Glossy or Matte. Which one would be preferrable? so as to not deteriorate the experience much
Sent from my Spice Mi-310 using XDA
redpoint73 said:
Even Gorilla Glass can be scratched from normal usage (as numerous reports by XDA users on various devices will attest). So don't take for granted that treated glass or GG makes your screen impossible to scratch.
Click to expand...
Click to collapse
Well said!
agambhandari said:
Also, can anybody tell me the effect of the screen guard on the S-pen experience. Glossy or Matte. Which one would be preferrable?
Click to expand...
Click to collapse
I'm wondering about these questions too.
agambhandari said:
Regards to applying, I would actually from a brick-and-mortar mobile shops, those guys are real experts at applying these.
Also, can anybody tell me the effect of the screen guard on the S-pen experience. Glossy or Matte. Which one would be preferrable?
Click to expand...
Click to collapse
The wet apply screen protectors are pretty forgiving, and easy to apply. But having a pro do it is not a bad idea, if you are uncomfortable trying. If they mess it up, they typically just take it off and try again with a new protector (at no charge to you). Obviously not an option, if you do it yourself.
Can't comment personally on matte protectors. But some folks over at the HTC Flyer forum (my old tablet, that also has pen support) seemed to like the matte protectors, as the slightly textured surface felt a bit more like writing on paper. Using the pen on the glossy or non-matte variety is very similar to how it feels on the bare screen.
Matte protectors also cut down on glare. But they tend to give a "hazy" look to the screen that I find unacceptable.
redpoint73 said:
The wet apply screen protectors are pretty forgiving, and easy to apply. But having a pro do it is not a bad idea, if you are uncomfortable trying. If they mess it up, they typically just take it off and try again with a new protector (at no charge to you). Obviously not an option, if you do it yourself.
Can't comment personally on matte protectors. But some folks over at the HTC Flyer forum (my old tablet, that also has pen support) seemed to like the matte protectors, as the slightly textured surface felt a bit more like writing on paper. Using the pen on the glossy or non-matte variety is very similar to how it feels on the bare screen.
Matte protectors also cut down on glare. But they tend to give a "hazy" look to the screen that I find unacceptable.
Click to expand...
Click to collapse
Thanks for the quick reply.
As a screen itself, I find Matte ones to be better, the viewing angles and sharpness can feel a notch down than the glossy, but the reduction in glare is pretty significant. I have it on one of my Laptops(also Samsung) and it feels very good.
I guess have to wait for others' views on the S-pen experience. Probably other Note devices have some opinions on other XDA sections, will try to find out
I hired the Geek Squad to install one of those InvisibleShield protectors from BestBuy when I got my Note 8, and had it on my tablet for about three hours. I took it off because it creates an incredible amount of friction with the S Pen's nub, making writing with the thing a fantastically aggravating chore (not to mention that the pen left track marks). I'm not saying that all screen protectors are so bad when it comes to this thing's core functionality, but InvisibleShield sure is. I'd be very curious about a protector with the lubriciously of the actual screen.
ZaphodAK42 said:
I hired the Geek Squad to install one of those InvisibleShield protectors from BestBuy when I got my Note 8, and had it on my tablet for about three hours. I took it off because it creates an incredible amount of friction with the S Pen's nub, making writing with the thing a fantastically aggravating chore (not to mention that the pen left track marks). I'm not saying that all screen protectors are so bad when it comes to this thing's core functionality, but InvisibleShield sure is. I'd be very curious about a protector with the lubriciously of the actual screen.
Click to expand...
Click to collapse
Could you throw some light on the material of the Screen Guard, was it glossy or matte?
So are you without the Guard now?
Sent from my Spice Mi-310 using XDA
Check out the thread I just made for the MiniGuard. It works very well!
Sent from my GT-N5110 using xda app-developers app
agambhandari said:
Could you throw some light on the material of the Screen Guard, was it glossy or matte?
So are you without the Guard now?
Sent from my Spice Mi-310 using XDA
Click to expand...
Click to collapse
The guard was glossy, near as I can remember. I am indeed without the protector.
Sent from my GT-N5110 using XDA Premium HD app
ZaphodAK42 said:
I hired the Geek Squad to install one of those InvisibleShield protectors from BestBuy when I got my Note 8, and had it on my tablet for about three hours. I took it off because it creates an incredible amount of friction with the S Pen's nub, making writing with the thing a fantastically aggravating chore (not to mention that the pen left track marks). I'm not saying that all screen protectors are so bad when it comes to this thing's core functionality, but InvisibleShield sure is. I'd be very curious about a protector with the lubriciously of the actual screen.
Click to expand...
Click to collapse
The ZAGG InvisibleShield screen protectors are the type applied with a liquid solution. Any of these type of screen protectors need to sit untouched for at least 24 hours to completely dry and become hard. Otherwise if you use your device before the skin has had a chance to completely dry, it will be slightly gummy at first, then a bit harder but still a bit of a rubber-type surface when using a stylus, which causes the stylus tip grab or stutter across the surface. Even when dry, these have a slight Orange Peel surface that I don't care for. YMMV. IME these also don't work well or last very long in Tropical or humid enviroments.
I've never liked any of the wet-application protectors for these reasons...I've tried the Zagg's, Skinomi's and one other I can't remember. I'll stick to the SGP/Steinhill Ultra Crystal dry-application protectors. Unfortunately, these aren't available yet for the Note 8.0.
Just my .02
bbfoto said:
The ZAGG InvisibleShield screen protectors are the type applied with a liquid solution. Any of these type of screen protectors need to sit untouched for at least 24 hours to completely dry and become hard. Otherwise if you use your device before the skin has had a chance to completely dry, it will be slightly gummy at first, then a bit harder but still a bit of a rubber-type surface when using a stylus, which causes the stylus tip grab or stutter across the surface. Even when dry, these have a slight Orange Peel surface that I don't care for. YMMV. IME these also don't work well or last very long in Tropical or humid enviroments.
I've never liked any of the wet-application protectors for these reasons...I've tried the Zagg's, Skinomi's and one other I can't remember. I'll stick to the SGP/Steinhill Ultra Crystal dry-application protectors. Unfortunately, these aren't available yet for the Note 8.0.
Just my .02
Click to expand...
Click to collapse
Huh... that liar. The guy at BB told me that the protector would be just fine and dandy after two hours, which is why I bailed after trying to use it for an hour. Oh well. At least it provided about an hour of amusement as my buddy and I attempted to rip or puncture the plastic with everything we had in the house (we were unsuccessful, even with ceramic knives and a motorized hand drill) (edit- after I had taken the protector of my tablet, of course). I'll keep an eye out for one of the dry applicators that you mention. And I'll apply it myself, after reading the instructions with my own eyes.
Sent from my GT-N5110 using XDA Premium HD app
ZaphodAK42 said:
I'll keep an eye out for one of the dry applicators that you mention. And I'll apply it myself, after reading the instructions with my own eyes.
Click to expand...
Click to collapse
Be aware that dry apply is much more difficult to put on. With wet apply, you have time to slide it around, into just the right position, before you squeegee the excess application fluid out. With dry apply, its basically like a sticker, if you are off by just millimeters as you start to place it, you have to peel it back and start over, likely getting more fingerprints on the edges every time you do that.
Also, for some reason I can't explain, the wet apply gets much less dust under the protector as you apply it. The wet apply protectors I've used (twice now) have gone on flawlessly, and dust free as far as I can see. Before this, I used the dry apply many times. It took some practice before I could really get a dust free application. The first few I did, had a good amount of dust under them until I learned to go it just right. Even with experience, it takes a lot of care to get a dust free install with the dry apply. With wet apply, its pretty effortless.
I couldn't tell you why the wet apply seems to get less dust under them during installation. It doesn't make sense by conventional wisdom. Maybe dust particles just get carried away, when you squeegee the excess application fluid away.
I'd recommend doing the shower trick with the dry apply type (and it doesn't hurt with wet apply either) to reduce the amount of dust in the air while you do the install. That is, run a hot shower for 10 minutes or so, to steam up your bathroom. This pulls much of the dust out of the air. Then bring your tablet in there and apply the protector (don't leave it in there before or after the install, to minimize the time the device is exposed to high humidity).
Its true that dry apply does have a smoother finish and less tacky feel then wet apply. They tend to not suffer from the "orange peel" look. But the orange peel look on good quality wet apply protectors tends to be hardly visible when the screen is off, and not visible at all when the screen is on. But this might vary depending on the room's lighting conditions. To me, the orange peel is not a bother, but that is probably a personal preference.
The experts who put the guards here, first polish the device display to a great extent and then put the guard straightaway.
The one they applied on my phone, had a good protective covering which was peeled as the guy applied more and more. Even after this, there was another protection over the actual guard.
Also the screen guard wasnt specifically for my device, he also cut it out as per my device after the application.
Sent from my Spice Mi-310 using XDA
bbfoto said:
The ZAGG InvisibleShield screen protectors are the type applied with a liquid solution. Any of these type of screen protectors need to sit untouched for at least 24 hours to completely dry and become hard. Otherwise if you use your device before the skin has had a chance to completely dry, it will be slightly gummy at first, then a bit harder but still a bit of a rubber-type surface when using a stylus, which causes the stylus tip grab or stutter across the surface. Even when dry, these have a slight Orange Peel surface that I don't care for. YMMV. IME these also don't work well or last very long in Tropical or humid enviroments.
I've never liked any of the wet-application protectors for these reasons...I've tried the Zagg's, Skinomi's and one other I can't remember. I'll stick to the SGP/Steinhill Ultra Crystal dry-application protectors. Unfortunately, these aren't available yet for the Note 8.0.
Just my .02
Click to expand...
Click to collapse
I emailed Spigen SGP asking if they were going to make one for the Note 8 and they said they had no plans to do so. i was certainly disappointed to hear that. I have one of their protectors on my note 2 and its great. I agree with you, the dry apply protectors are so much smoother than the wet ones and do not have orange peel or get that "sticky" feeling.
there is another thread with a review of the MiniGuard protectors which look to be of the dry apply variety. i almost bought some the other day when i ran across them at amazon and now that the review confirmed it (with pics too), this looks like the best option since Spigen wont be making anything.
http://www.amazon.com/gp/product/B00BXQUQ9U/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Turbo Brian said:
there is another thread with a review of the MiniGuard protectors which look to be of the dry apply variety. i almost bought some the other day when i ran across them at amazon and now that the review confirmed it (with pics too), this looks like the best option since Spigen wont be making anything.
Click to expand...
Click to collapse
That is too bad about Spigen SGP. If you (or others) try out the MiniGuard protectors consider letting us all know your impressions (and whether you went with Clear or Anti-Glare). @JokeZony0u has done a great review of the Clear protectors, but I think it is still helpful to have multiple datapoints for these kinds of things.
^^Thanks for that. Yeah, it looks as if the MiniGuard is the dry-app protector to get since Spigen SGP is out of the equation. Hopefully we'll get more good reviews of other protectors as well.
I agree that the hot, steamy shower technique is good. Also have some small, clean pieces of 3M Scotch Tape handy to pluck off any dust particles from the screen or the contact side of the protector film. I use a large microfiber cloth lightly dampened with isopropol alcohol to clean the entire device beforehand. Then I use the included microfiber cloth to further clean the screen just before applying the protector.
There's a good YouTube video on the best way to apply the dry protectors.
You line the protector up on your screen first (before removing any layers).
Then once the film is aligned properly, hold it in place and attach two pieces of blue painter's tape to the top of the protector film and just along ONE SIDE of the phone/tablet...one near the top and one near bottom, so that the screen protector flaps open to one side like a page in a book, using the blue painter's tape as a hinge.
Flip it open & out of the way and clean the screen again with your microfiber cloth. Double-check your alignment and readjust if necessary.
Then peel back the bottom film layer, remove it completely, and slowly apply the screen protector from the taped side to the free side.
Sqeegee out any bubbles.
Lift the protector just slightly with another small piece of blue painter's tape if you need to remove any dust particles with your Scotch Tape.
Sqeegee again and make sure the alignment is good.
Only remove the side positioning tape if you are satisfied with the application and alignment.
Finally, carefully remove the temporary top layer from the main screen protector film, being careful not to lift the main protector film.

Does the screen easily scratched?

I am waiting for my Galaxy S6 arrives. Does the screen easily scratched? I don't want to take extremely good care of it.
And also does anyone try using tempered glass protector? How does it feel compared to regular?
I have preordered an extended battery case and they promised to give me a tempered glass protector. I'll let you all know how it works once I get them.
pixfantasty said:
I have preordered an extended battery case and they promised to give me a tempered glass protector. I'll let you all know how it works once I get them.
Click to expand...
Click to collapse
Can you please link me to the extended battery case you ordered.
Thank you.
I got the zagg tempered glass protector and it feels pretty solid. IMO the gorilla glass 4 feels a bit better but it's super clear and feels nice.
The S6 is made of Gorilla glass corning 4 so it's pretty tough but it wouldn't hurt to have some sort of protection. I have IQShield screen protectors and it provides full coverage. Check them out on Amazon. Also it's currently on sale.
AttachedSilver said:
I got the zagg tempered glass protector and it feels pretty solid. IMO the gorilla glass 4 feels a bit better but it's super clear and feels nice.
Click to expand...
Click to collapse
same.
Seed 2.0 said:
Can you please link me to the extended battery case you ordered.
Thank you.
Click to expand...
Click to collapse
I think it's this one:
http://www.mpjbattery.com/mpj-recha...nk-case-for-samsung-galaxy-s6-g920-g920f.html
My screen on my S6 has scratched really really easy, only had a few days and there is a one inch very deep scratch on the screen. in all the years I've had a phone I've never scratched a phone so badly as this. The worsted thing is i have no idea how it happened. had my S5 for about 18 months with not one single mark or anything to the phone screen
mark845 said:
My screen on my S6 has scratched really really easy, only had a few days and there is a one inch very deep scratch on the screen. in all the years I've had a phone I've never scratched a phone so badly as this. The worsted thing is i have no idea how it happened. had my S5 for about 18 months with not one single mark or anything to the phone screen
Click to expand...
Click to collapse
Sorry to hear about the deep scratch. I don't have a screen protector on mine yet, though I just received the BodyGuardz Ultra Tough. I've been careful, but I'm not using a case or screen protector at all currently and have just been putting it in my pocket thus far. I would say scratches were much easier to put on my previous phone, which was the crusty old S3.
OP, I think that the screen can and will scratch somewhat easily. I think that if you don't want to take extra precautions with the phone on a day-to-day basis, I would recommend getting a screen protector and/or a case. These just allow you to be a little more clumsy and not have any repercussions. (or fewer repercussions.)
stureiney said:
OP, I think that the screen can and will scratch somewhat easily. I think that if you don't want to take extra precautions with the phone on a day-to-day basis, I would recommend getting a screen protector and/or a case. These just allow you to be a little more clumsy and not have any repercussions. (or fewer repercussions.)
Click to expand...
Click to collapse
i got one or two fine scratch before i got the zagg screen protector but i got the hd not the glass
with the case can't really tell it there
Totally naked just ordered spigen backless bumper satin silver with regular screen protectors front and back to keep enjoying the slim profile
Sent from my SM-G920F using Tapatalk
doesn't scratch easily but my oleophobic coating is already wearing and ive had it since april 10th
i've had the phone since launch and been using it without screen protector and have not notice any scratches at all. Im not careful with my phone too. Put it in my pocket with keys and change regularly and put it screen down, since the camera makes the phone slippery when it's on smooth uneven surfaces. With previous phones, nexus 4 and 5, they would have some micro scratches by now. I dont get this obsession over getting scratches on a screen that are not noticeable when the screen is on. You are only going to have this phone for a year or two so i dont see what the big deal is.
I got a small scratch after using the phone for one day. Probably due to a grain of sand in my pocket or something like that. I'm planning on getting a screen protector not only to prevent further scratching, but also to ensure the current scratch won't be visible to the naked eye. Albeit knowing that there already is a scratch truly grinds my gear.
ytheunissen said:
I got a small scratch after using the phone for one day. Probably due to a grain of sand in my pocket or something like that. I'm planning on getting a screen protector not only to prevent further scratching, but also to ensure the current scratch won't be visible to the naked eye. Albeit knowing that there already is a scratch truly grinds my gear.
Click to expand...
Click to collapse
I sometimes miss my old moto x 2013-- that thing NEVER scratched no matter what. I had that thing naked for a two years and I re-sold it in immaculate condition. I dropped that thing dozens of times, and it was never harmed once. I miss that thing...
I had a fine scratch on mine after a couple days of use. Luckily Rogers let me exchange mine anyway cause mine had a slightly looser than normal home button.
Quickly put on a tempered glass protector on both the front and back.
Sallyty said:
I'd recommend the Tempered Glass Screen Protector,Thin, transparent.
Tempered glass protection screen of mobile phone film is currently the most high-end products to strengthen the protection of the.
The protective layer thickness of only 0.1 mm, can completely cover the original screen surface, prevent external damage, scratches, more shock absorbent, 5 times higher than the standard PET film. The video has no effect on the screen.
Click to expand...
Click to collapse
Thank you for your opinion-- do you have a brand that you recommend? I think we all know that glass screen protectors are the way to go, but it's a matter of which company you buy from that determines the success or failure of the screen protector.
i scratched the flash/heart rate monitor sensor glass, luckily everything still works and i'm thankful it wasn't my camera lens
I have the S6 for one week nude and no scratches, though I am very careful.
I am just a little annoyed by the reflection rainbow effect the screen does under sunlight, will a tempered glass take it away?

Plastic Screen Protector that actually seals around the edges.

So after several failures with glass protectors and halo effects with all of them, I decided to try a PET version-- just to get some protection on the glass, thinking that I would just have to deal with the feel of it.
I tried amFilm (have used their stuff before, and it was pretty good).
Well, now a few days later, the screen does not have any halo effect. It sticks to the sides very well, and doesn't seem to be up-lifting at all. The feel is still plasticy, but that's about expected. It certainly doesn't feel as smooth as glass, but I'll take it. The glass ones were pealing off, haloing, etc etc, and this is a perfect solution. I'm sure that in time, I will come to grow used to the feel, and it won't even be a hindrance at all.
I am using the same one, someone mentioned this one on the glass SP thread so I gave it a try.
Been using it for a week now, and it's already showing some signs of use, a few scratches, pretty sure it's gonna be all over in a couple of months. I also have misty fingers, so gliding over the screen is painful in times.
One thing I don't like about it is the cutout for the front camera, they could've easily just made a hole instead of how it cuts off on the top. Also, it does lift a little bit when I press the volume or power buttons, I think I have aligned it pretty OK too, but nothing is perfect I guess.
Sent from my SM-G928T using Tapatalk
MMakoto said:
I am using the same one, someone mentioned this one on the glass SP thread so I gave it a try.
Been using it for a week now, and it's already showing some signs of use, a few scratches, pretty sure it's gonna be all over in a couple of months. I also have misty fingers, so gliding over the screen is painful in times.
One thing I don't like about it is the cutout for the front camera, they could've easily just made a hole instead of how it cuts off on the top. Also, it does lift a little bit when I press the volume or power buttons, I think I have aligned it pretty OK too, but nothing is perfect I guess.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I'll have to watch out for that as I go along. At least there's a lifetime warranty- so when it does wear out, you can get another one for free!
I've been hearing some good things about this products. Thanks, I think that I'll try it out.
Using the same thing, been 2 weeks and it does get scratched easily but good enough for now. Been using amFilm for awhile too. They already made tempered glass for 6s, wish they would make one for our phones.
a.gu said:
So after several failures with glass protectors and halo effects with all of them, I decided to try a PET version-- just to get some protection on the glass, thinking that I would just have to deal with the feel of it.
I tried amFilm (have used their stuff before, and it was pretty good).
Well, now a few days later, the screen does not have any halo effect. It sticks to the sides very well, and doesn't seem to be up-lifting at all. The feel is still plasticy, but that's about expected. It certainly doesn't feel as smooth as glass, but I'll take it. The glass ones were pealing off, haloing, etc etc, and this is a perfect solution. I'm sure that in time, I will come to grow used to the feel, and it won't even be a hindrance at all.
Click to expand...
Click to collapse
Thanks, I'll have to check this one out.
The TPU screen protectors seem to work. I have one on mine and its holding on really well. They are much like the TPU cases, a soft feeling gel like film. They are completely floppy, so dont try to pull up like the harder plastic films, they are also virtually invisible.
There are downsides, they are very floppy and stretchy, so can be tricky to fit. Im also not too sure how durable they will be. They recover from some marks quite easily, but they can snag. This is the one I have on mine..
http://www.amazon.co.uk/gp/product/B0152BXVXE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I use the Spigen with front and rear protection. Very good quality as usual with Spigen.
Envoyé de mon GT-N5110 en utilisant Tapatalk
Curious to know what's the point of a screen protector these days with the glass being so scratch resistant.
I.e on my iphone 5, i had it for 2 years no protector. only scratches are ones not visible. Unless you throw your phone around like a toy, put it in a pocket full of sand ect, You really wont scratch it.
pauly92 said:
Curious to know what's the point of a screen protector these days with the glass being so scratch resistant.
I.e on my iphone 5, i had it for 2 years no protector. only scratches are ones not visible. Unless you throw your phone around like a toy, put it in a pocket full of sand ect, You really wont scratch it.
Click to expand...
Click to collapse
For me it's "just in case" protection. I'm very careful with my toys, and even more so with this expensive phone. There are times when things happen and by me just being me and it falling off my lap, all it takes is that one unlucky fall when it hits the corner of the chair leg. I've never broken a phone screen, yet...
Sent from my SM-G928V using Tapatalk
pauly92 said:
Curious to know what's the point of a screen protector these days with the glass being so scratch resistant.
I.e on my iphone 5, i had it for 2 years no protector. only scratches are ones not visible. Unless you throw your phone around like a toy, put it in a pocket full of sand ect, You really wont scratch it.
Click to expand...
Click to collapse
Gorilla Glass is about as scratch resistant as cheese. Its actually worse than normal glass. Gorilla Glass is somewhat shock resistant and highly flexible, but not scratch resistant.
ChrisM75 said:
Gorilla Glass is about as scratch resistant as cheese. Its actually worse than normal glass. Gorilla Glass is somewhat shock resistant and highly flexible, but not scratch resistant.
Click to expand...
Click to collapse
I'm calling you on this one, I work with glass every day, and i'm around an engineering shop daily, so there's plenty of potential for my glass to scratch. It's held up fine for 2 years no protector.
Glass on the Mohs scale is 5.5
Gorilla glass is 6.8
Diamond is 10.
pauly92 said:
I'm calling you on this one, I work with glass every day, and i'm around an engineering shop daily, so there's plenty of potential for my glass to scratch. It's held up fine for 2 years no protector.
Glass on the Mohs scale is 5.5
Gorilla glass is 6.8
Diamond is 10.
Click to expand...
Click to collapse
'Glass' as in soda glass maybe, but plenty of other types are better. 6.8 isnt that great. It certainly doesn't explain why my last phone got a scratch after falling face first on a brand new clean carpet!
Scratching isnt all about hardness anyway, its only part of the story and is sold to us in marketing BS. A softer object can scratch a harder one, all that happens is that the softer one is damaged more. This notion that hardness alone is all there is to scratching or breaking is completely wrong and needs to stop.
A rough piece of metal, almost any metal, will tear up the surface of GG very easily indeed.
I bought a skinomi film that wraps around both edges...there self healing too
Anyone tried Pleson?

Curved screen and protectors

They said it would not cover the whole screen but I didn't think it would be this extreme. Looking straight down on the device you'd see pixels outside of the screen protector on both sides.
Riffue.cn
This one is wider and covers all the pixels, but since it does not follow the screen curve there's about 1.5mm of free hanging protector on each side.
Panzer.me
For this one they tried to curve it along the screen edge, but it didn't quite fit, which caused large areas where the protector would lift from the screen. The downwards facing edge of the protector seems to be covered in the glue like substance, the central area of the protector did not stick to the phone in any way. Possibly because of the bad fit there would be some air between the protector and phone in the middle of the screen, this caused some missed taps. Away of the center of the protector the touch recognition would be better. This one seemed the least susceptible to fingerprints.
Thank you for the testing.
So I will not buy one of these.
Maybe I will try a thin l foil or I will use it without any protection.
thanks to who invented these fu*king curved screens.. for us that always use glass protectors it is simply a nightmare.. or you use protectors as big as the pixeled area and live with the edges coming off, or you take protectors smaller than the pixeled area that looks bad and don't protect all the screen.. damn
curious to know if this curved glass would be any better?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
I am on the road so I cant post any pics, but I have the roxfit curved protector. It does match the screen except the curve isn't perfect thus the very edge around the entire screen is collecting dust. With the screen sensitivity issue however I'm debating on pulling it off. Hitting the same button 2-3 times to get something to register sucks
To be honest, this is what is putting me off buying this phone is the curved screen, i really dont see the point of it to be honest, tempted to jusct pick up the XZ1 compact instead.
You really can't even tell the screen is curved at all. Just the edges are slightly. It's not even noticeable.
yeah if the curved screen is the only thing preventing you from getting this phone, forget it, apart from this (and you'll notice just if you use glass protectors) the phone is simply wonderful in all other aspects l
mattnathaniel12 said:
You really can't even tell the screen is curved at all. Just the edges are slightly. It's not even noticeable.
Click to expand...
Click to collapse
FcukBloat said:
yeah if the curved screen is the only thing preventing you from getting this phone, forget it, apart from this (and you'll notice just if you use glass protectors) the phone is simply wonderful in all other aspects l
Click to expand...
Click to collapse
Thanks both, best go and check it out in person, perhaps judging it before i have seen it in my hand is a bit negative.
Thanks
Bugs of a new phone. The protector I got also overhanged into the curve. (I was under the impression that it was a curved screen protector when buying it, but it was not.) I assume these companies didn't have exact specs or physical phones to get it perfect with, and since we all want our phones protected from day one, they have to release what they got. :/
Has anyone found a screen protector that fits halfway decently yet?
i used a liquid screen protector called nanofixit in the netherlands. it makes the screen super smooth and didn't have a scratch after a week usage without any case. i had to send it back for repair and will have it back tomorrow.
Roxfit
mattnathaniel12 said:
I am on the road so I cant post any pics, but I have the roxfit curved protector. It does match the screen except the curve isn't perfect thus the very edge around the entire screen is collecting dust. With the screen sensitivity issue however I'm debating on pulling it off. Hitting the same button 2-3 times to get something to register sucks
Click to expand...
Click to collapse
I've tried this one as well and might have a worse fit than what you're experiencing. It was impossible to get a complete seal in the glue around the edge. The bad fit made the center of the screen an especially bad place the get touches registered, even worse then the panzer.me glass. IIRC there was also a shimmering issue between the edge of the LCD and whatever non-stick film they've put under the protector.
Does curved screen protectors exist for other phones that does not rely on a glue around the edges to stay put?
nanofixit
Dxue said:
i used a liquid screen protector called nanofixit in the netherlands. it makes the screen super smooth and didn't have a scratch after a week usage without any case. i had to send it back for repair and will have it back tomorrow.
Click to expand...
Click to collapse
Based on threads in this forum:
https://forum.xda-developers.com/note-4/accessories/nanofixit-liquid-screen-protector-nano-t3215739
and amazon reviews:
https://www.amazon.com/Nanofixit-ONE-Titanium-OFFICAL-antibacterial/product-reviews/B019Y4IPU4
it seems the nanofixit products might not be worth the asking price. (Scam perhaps?)
Did you get your phone back? What was the issue? Do you usually get scratches on phones in a weeks time?
I'm asking because fail to see how a thin layer of liquid could provide any scratch resistance, besides whatever the screen already has. And as such it might just make liquid slide off the screen easily for a while and not much else.
It is my belief the nano liquid products are a scam. Granted I've never tried it myself.....but I don't see how it could possibly work.
Based on threads in this forum:
https://forum.xda-developers.com/not...-nano-t3215739
and amazon reviews:
https://www.amazon.com/Nanofixit-ONE...ews/B019Y4IPU4
it seems the nanofixit products might not be worth the asking price. (Scam perhaps?)
Did you get your phone back? What was the issue? Do you usually get scratches on phones in a weeks time?
I'm asking because fail to see how a thin layer of liquid could provide any scratch resistance, besides whatever the screen already has. And as such it might just make liquid slide off the screen easily for a while and not much else.
Click to expand...
Click to collapse
It is my belief the nano liquid products are a scam. Granted I've never tried it myself.....but I don't see how it could possibly work.
Click to expand...
Click to collapse
it was my misstake for not being clearer when posting my message, I have another problem with the phone which is not related to the screen at all. My phone can't receive incoming calls for some reason. The screen is still in a tip top shape and i have also accidentally dropped the phone on a stone floor from around 0,5 meters. Nothing to see on the screen (or the phone for that matter). The reason that it can work in my opinion is that you can have very hard plastic nowadays that is not worse than metal (see carbon fiber for example). If they can keep it in a liuid state and it can harden itself out when in contact with air, why is it not possible? Chemistry is nowadays so advanced I wouldn't be surprised if they can make even better nano coatings, if you have enough money for it
Bought Skinomi's protector and it was a perfect fit. It is not a hard screen protector its more of a clear flexible skin. Due to it being flexible it molded right to the curved edges of the screen without any issues. Until they come up with a hard protector this should do just fine though, atleast itll keep minor scuffs and scratches to a minimum.
Ultimate Shield seems to do its job - at least for me. Uses glue to stick, but covers the whole screen. Makes a bit harder to register touch sometimes.

Categories

Resources