Curved screen and protectors - Sony Xperia XZ2 Compact Accessories

They said it would not cover the whole screen but I didn't think it would be this extreme. Looking straight down on the device you'd see pixels outside of the screen protector on both sides.

Riffue.cn
This one is wider and covers all the pixels, but since it does not follow the screen curve there's about 1.5mm of free hanging protector on each side.

Panzer.me
For this one they tried to curve it along the screen edge, but it didn't quite fit, which caused large areas where the protector would lift from the screen. The downwards facing edge of the protector seems to be covered in the glue like substance, the central area of the protector did not stick to the phone in any way. Possibly because of the bad fit there would be some air between the protector and phone in the middle of the screen, this caused some missed taps. Away of the center of the protector the touch recognition would be better. This one seemed the least susceptible to fingerprints.

Thank you for the testing.
So I will not buy one of these.
Maybe I will try a thin l foil or I will use it without any protection.

thanks to who invented these fu*king curved screens.. for us that always use glass protectors it is simply a nightmare.. or you use protectors as big as the pixeled area and live with the edges coming off, or you take protectors smaller than the pixeled area that looks bad and don't protect all the screen.. damn

curious to know if this curved glass would be any better?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228

I am on the road so I cant post any pics, but I have the roxfit curved protector. It does match the screen except the curve isn't perfect thus the very edge around the entire screen is collecting dust. With the screen sensitivity issue however I'm debating on pulling it off. Hitting the same button 2-3 times to get something to register sucks

To be honest, this is what is putting me off buying this phone is the curved screen, i really dont see the point of it to be honest, tempted to jusct pick up the XZ1 compact instead.

You really can't even tell the screen is curved at all. Just the edges are slightly. It's not even noticeable.

yeah if the curved screen is the only thing preventing you from getting this phone, forget it, apart from this (and you'll notice just if you use glass protectors) the phone is simply wonderful in all other aspects l

mattnathaniel12 said:
You really can't even tell the screen is curved at all. Just the edges are slightly. It's not even noticeable.
Click to expand...
Click to collapse
FcukBloat said:
yeah if the curved screen is the only thing preventing you from getting this phone, forget it, apart from this (and you'll notice just if you use glass protectors) the phone is simply wonderful in all other aspects l
Click to expand...
Click to collapse
Thanks both, best go and check it out in person, perhaps judging it before i have seen it in my hand is a bit negative.
Thanks

Bugs of a new phone. The protector I got also overhanged into the curve. (I was under the impression that it was a curved screen protector when buying it, but it was not.) I assume these companies didn't have exact specs or physical phones to get it perfect with, and since we all want our phones protected from day one, they have to release what they got. :/

Has anyone found a screen protector that fits halfway decently yet?

i used a liquid screen protector called nanofixit in the netherlands. it makes the screen super smooth and didn't have a scratch after a week usage without any case. i had to send it back for repair and will have it back tomorrow.

Roxfit
mattnathaniel12 said:
I am on the road so I cant post any pics, but I have the roxfit curved protector. It does match the screen except the curve isn't perfect thus the very edge around the entire screen is collecting dust. With the screen sensitivity issue however I'm debating on pulling it off. Hitting the same button 2-3 times to get something to register sucks
Click to expand...
Click to collapse
I've tried this one as well and might have a worse fit than what you're experiencing. It was impossible to get a complete seal in the glue around the edge. The bad fit made the center of the screen an especially bad place the get touches registered, even worse then the panzer.me glass. IIRC there was also a shimmering issue between the edge of the LCD and whatever non-stick film they've put under the protector.
Does curved screen protectors exist for other phones that does not rely on a glue around the edges to stay put?

nanofixit
Dxue said:
i used a liquid screen protector called nanofixit in the netherlands. it makes the screen super smooth and didn't have a scratch after a week usage without any case. i had to send it back for repair and will have it back tomorrow.
Click to expand...
Click to collapse
Based on threads in this forum:
https://forum.xda-developers.com/note-4/accessories/nanofixit-liquid-screen-protector-nano-t3215739
and amazon reviews:
https://www.amazon.com/Nanofixit-ONE-Titanium-OFFICAL-antibacterial/product-reviews/B019Y4IPU4
it seems the nanofixit products might not be worth the asking price. (Scam perhaps?)
Did you get your phone back? What was the issue? Do you usually get scratches on phones in a weeks time?
I'm asking because fail to see how a thin layer of liquid could provide any scratch resistance, besides whatever the screen already has. And as such it might just make liquid slide off the screen easily for a while and not much else.

It is my belief the nano liquid products are a scam. Granted I've never tried it myself.....but I don't see how it could possibly work.

Based on threads in this forum:
https://forum.xda-developers.com/not...-nano-t3215739
and amazon reviews:
https://www.amazon.com/Nanofixit-ONE...ews/B019Y4IPU4
it seems the nanofixit products might not be worth the asking price. (Scam perhaps?)
Did you get your phone back? What was the issue? Do you usually get scratches on phones in a weeks time?
I'm asking because fail to see how a thin layer of liquid could provide any scratch resistance, besides whatever the screen already has. And as such it might just make liquid slide off the screen easily for a while and not much else.
Click to expand...
Click to collapse
It is my belief the nano liquid products are a scam. Granted I've never tried it myself.....but I don't see how it could possibly work.
Click to expand...
Click to collapse
it was my misstake for not being clearer when posting my message, I have another problem with the phone which is not related to the screen at all. My phone can't receive incoming calls for some reason. The screen is still in a tip top shape and i have also accidentally dropped the phone on a stone floor from around 0,5 meters. Nothing to see on the screen (or the phone for that matter). The reason that it can work in my opinion is that you can have very hard plastic nowadays that is not worse than metal (see carbon fiber for example). If they can keep it in a liuid state and it can harden itself out when in contact with air, why is it not possible? Chemistry is nowadays so advanced I wouldn't be surprised if they can make even better nano coatings, if you have enough money for it

Bought Skinomi's protector and it was a perfect fit. It is not a hard screen protector its more of a clear flexible skin. Due to it being flexible it molded right to the curved edges of the screen without any issues. Until they come up with a hard protector this should do just fine though, atleast itll keep minor scuffs and scratches to a minimum.

Ultimate Shield seems to do its job - at least for me. Uses glue to stick, but covers the whole screen. Makes a bit harder to register touch sometimes.

Related

what the different with those screen protectors?

http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
I don't use them ...
farwish said:
http://www.spigen.com/new-product/spigen-sgp-htc-one-x-screen-protector-steinheil-ultra-series.html
Two choice,
1.Ultra Fine
2.Ultra oleophobic
which one is batter?
thanks
Click to expand...
Click to collapse
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
I get where you're coming from Peter but just because you don't want screen protectors doesn't mean you shouldn't try and contribute to someone who does. My Captivate had gorilla glass and it has plenty of scratches just because of grit. It happens, no matter what.
However, Ultra Fine is just going to be super clear, and Ultra Oleophobic will do it's best to keep finger prints from showing/building up.
PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
grinmaul said:
I used to use screen protectors all the time until my nexus one, had that phone for 2 years with plenty of abuse, including at least 4 good drops, one in a cement underground parking floor with a small kick and slide for good measure, my hart stooped on that one! still not a scratch on that phone.
so i did not get one for my galaxy nexus, dropped it once while kneeling on the flatbed of a tow truck, not a very far drop at all, and got 1 nasty looking scratch and 3 minor ones! ruined my day, week even i still look at it and get sad.
i have no idea what glass is in the galaxy nexus, but to me it was very easy to scratch, if i can find a screen protector for the xl that is not annoying to look at i will probable start using one.
just sayin
Click to expand...
Click to collapse
ditto here. i noticed the other day i had a tiny scratch up near the ear piece of my GNex. mine has never been dropped so not sure where i got it from but it was the first phone i went completely naked with. won't make that mistake again. def getting a screen protector and most likely the SGP Oleo.
PeterHTC said:
I don't use screen protectors on any phone with gorilla glass. It's basically unnecessary. It's virtually impossible to scratch the screen unless you really make the effort.
Remember, it's glass. Why not take a fork and try your best to scratch a window made of glass. It can't be done.
Peter
Click to expand...
Click to collapse
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
nabbed said:
Any minute particle of sand will scratch gorilla glass without exception.
You are 1) being irresponsible, 2) promoting those irresponsible ideas to others.
Gorilla glass is not scratch proof by any means. It has barely higher hardness compared to normal borosilicate glass, and it's far softer than sand.
Click to expand...
Click to collapse
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy. Many people don't believe in screen protectors. I live in sandy Florida and I've been just fine. My friend on the other hand scars his screens.
vioalas said:
Calling someone irresponsible is a bit harsh, no? It's a difference in philosophy.
Click to expand...
Click to collapse
True, its all a matter of personal choice. There is a tiny change in the feel when you use a screen protector, and some don't like it. If a person chooses not to use a screen protector, and willing to live with scratches (if they do occur) then that's totally up to them. If someone scratches the screen, and claims the GG as "defective", then I suppose that is irresponsible (as there is not advertised guarantee against scratches).
That said, GG is far from impossible to scratch. Its intended to be scratch resistant, but can still be scratched (and even cracked). Coming from another device with GG, I can tell you that I have seen many cases of people that got scratches after normal use, and no obvious instances of abuse, drops, etc. And if you remember when the iPhone first came out with GG, there were also plenty of instances of people getting scratches almost immediately after release. On the other hand, plenty of people have had good luck with no scratches on GG, even after serious drops, etc. A bit of luck is certainly at play. But if you don't use a screen protector, and end up with a scratch, you can't easily undo it. IMO, its better to use a protector, and not have to worry about such regret.
A good quality screen protector has very minimal change in feel (although there is a very slight difference) no change in look, and will also attract fingerprints and smudges a bit less than the "naked" screen. Cheap ones are not worthwhile, and often look and feel much worse, and can start peeling off easily. Some people that are against protectors, may be due to experience with a cheap one. Bodguardz and Skinomi are quality ones that I have used, and there are plenty of other good ones.
Hey guys, this topic was started to answer a mans question about the difference between two types of screen protectors not borosilicate and gorilla glass. I feel that this topic should be A. closed if nothing good is to be added, or B. put back on topic for the benefit of OP.
okay, i'll knock his question out really quick...
the Ultra Fine (Anti-fingerprint) is a matte type of screen protector. because it is matte, it's going to degrade the colors a little bit. they won't be as vibrant as without this particular protector.
the Ultra Oleo is a clear screen protector. approx 100% of the colors will still come through as if you didn't have this one on. it's made to be resistant to fingerprints, though the Ultra Fine is going to do a far better job of keeping fingerprints off.
so, you have to ask yourself this...
do you mind losing some of the pop from the colors to keep fingerprints off of your screen, or would you rather see your display like there was nothing on it but have more visible fingerprints?
i always go with the clear ones. i had a matte protector on an old iPhone (3G?) and didn't like it. haven't had a matte one since.
Its a bit hidden, but it says on the product webpage FAQs:
What are the differences between the Steinheil Ultra Fine and Ultra Oleophobic Screen Protectors?
All of our screen protectors are Japanese made, enhanced optical hard films. The Ultra Oleophobic screen protectors is a clear type where it absolutely doesn't affect the screen image quality. Ultra Oleophobic has an oil resistant coating to resist oil and other contaminants. Ultra Fine screen protector is matte type hard film which resists against fingerprints and smudges, but it is less clear compared to other Steinheil screen protectors.
So it seems the main difference is that the Oleophobic seems to be the "regular flavor", while Ultra Fine has a matte finish (and $2 more). What is "best" for matte versus regular finish is typically a matter of preference. Matte tends to give less glare (and might be helpful outdoors in sunlight) but tend to be less clear, and may have a tackier feel or even textured feel (not sure if the different feel is true for this particular brand). Hopefully somebody with specific experience with this brand can give an opinion.
Some people (like the previous reply) don't like matte; while I've seen others that seek it out.
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
http://forum.xda-developers.com/showpost.php?p=25084817&postcount=69
there ya go vioalas, that's the skinomi protector, and it's a wet app so it's just like, the best fit possible. Hope that helped!
vioalas said:
Question about these screen protectors, if anybody has used them, can you post a picture? All the protectors I've seen for the One X so far look bad because of the way the screen is shaped, they curl up on the edges.
Click to expand...
Click to collapse
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
s.m.knipe said:
I can't do a pic (at work) but I have only used the Ultra Oleophobic on my past two devices, and it is the closest thing to the feeling of the glass out there. There is still a tiny bit of drag that isn't present on the screen, but really is barely noticeable.
Because these are dry application protectors, they can't go all the way to the lateral edges of the One X's screen, apparently it has a slight taper/roll and the SP would lift. My Galaxy Nexus (with the contoured screen) leaves about 2mm all the way around, and that was very clear in SGP's pics on their website. Their pics for the one X show less of a gap and the gap is mostly on the sides, so I think it will look better than it does on the Galaxy Nexus...
Click to expand...
Click to collapse
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
mrvirginia said:
thanks for input on the actual fit with dry protectors. i thought the glass was flat on the One X if true, the only way to get a complete fit would be wet applications. guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Any other places to get these now that fit.. Dry and not $16
s.m.knipe said:
No, I think it is just the gradual roll the edges of the screen do to meet the plastic. the screen itself is flat, and the roll appears to only be on the left and right sides. I think even wet application ones would have trouble with it... look at some of the pics that depict the phone in profile; the part of the screen glass that protrudes above the plastic (best noticed in the white model) seems to have a radius (or "roll") to it.
Click to expand...
Click to collapse
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
mrvirginia said:
guess i'll finally have to use a wet application.
Click to expand...
Click to collapse
The wet apply protectors are not as scary as they would seem. Your lightly spray the application fluid onto the protector, and its really not enough to penetrate into any cracks. And even if it does, its not enough to short circuit anything. Have the device powered off, and let it dry for the recommended time, and you will be fine.
I used dry apply protectors for my first couple smartphone, as I was also a bit wary of the wet apply method. But when I finally went the wet apply method, I found it easier to install. The wet method give you some time to get the protector perfectly in place before the protector adheres.
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
mrvirginia said:
ahh gotcha. well so far it sounds like the skinomi is the way to go. i was never a fan of that orange peel effect but if that's the best then that's what i'll have to go with.
Click to expand...
Click to collapse
I have a Skinomi installed on my Flyer tablet, and am quite pleased with it. its very smooth with no noticeable orange peel effect.
I guess I'll do the wet application. Would you guys trust the radioshacks/bestbuys that offer to apply it for you?

Will a screenprotector decrease the funcionallity of the spen?

Hi guys,
I am buying a sgn 10.1. But i was wondering if a screenprotector will decrease the accuracy and effectiveness of the spen.
Anyone some experience on this part ?
Cause i cant stand scratches on screens so was thinking of adding a protector but dont want the funcionality to decrease!
thx!
I don't think that it would, maybe at worst some loss in pressure sensitivity occurs (so you have less than 1024 levels), due to the 1mm or however thick the screen protector is.
l don't think you will lose any sensitivity because the pen uses magnetic inductance to operate which is why the pen does not need batteries.
l have a screen protector on my phone which is the small version of this tablet and there was no difference when the screen protector was applied. I am waiting for Samsung torelease their official screen protector in the UK for my 10.1 Note.
Don't buy Zagg or any like it
Just be sure not to buy a Zagg.
Bought one the same day as the Note at BestBuy.
Screen protector is so sticky you won't be able to use the pen at all.
I won't slide on the screen, and it won't register correctly.
It has nothing to do with the "cure" time, left the protector in for 2 days, same results.
Zagg is flexible and rubber like, will render the pen useless.
Buy a "static" type of screen protector, they are almost not flexible at all.
It's working perfectly now that I have it.
Under the "accessories" part of the forum you should be able to find several on Amazon.
Avoid ZAGG!!!
Wakez said:
Hi guys,
I am buying a sgn 10.1. But i was wondering if a screenprotector will decrease the accuracy and effectiveness of the spen.
Anyone some experience on this part ?
Cause i cant stand scratches on screens so was thinking of adding a protector but dont want the funcionality to decrease!
thx!
Click to expand...
Click to collapse
i have an 8 year old writeshield AG protector on mine and it works totally fine. just that the AG makes the screen look fuzzier is all...
fishgimp said:
i have an 8 year old writeshield AG protector on mine and it works totally fine. just that the AG makes the screen look fuzzier is all...
Click to expand...
Click to collapse
8 years old?
californiarailroader said:
8 years old?
Click to expand...
Click to collapse
haha yeah, I pulled it off my tablet pc and cut it to size. it fits and works perfectly! i have one scratch on that thing after hard abuse and that was from dropping a knife on it
i regularly leave my keys sitting on top of the protected screen actually.
the back plate of the note 10.1 is terribly soft though, I have lots of micro scratches on it and I've been taking pretty good care of it.
fishgimp said:
haha yeah, I pulled it off my tablet pc and cut it to size. it fits and works perfectly! i have one scratch on that thing after hard abuse and that was from dropping a knife on it
i regularly leave my keys sitting on top of the protected screen actually.
the back plate of the note 10.1 is terribly soft though, I have lots of micro scratches on it and I've been taking pretty good care of it.
Click to expand...
Click to collapse
Lol Now that is one tough mudder
I have the anti-glare screenprotector.
It vworks fine with the Spen, accept that the pen actually scratches the protector.... I think I need somthing stronger.
I tried to see if WhiteShield has one, but only for the Tab. I sent them a request message for the Note.....we'll see.
What is anyone else using, and does your Spen scratch the protector?
Thanks
fmf.post said:
Just be sure not to buy a Zagg.
Bought one the same day as the Note at BestBuy.
Screen protector is so sticky you won't be able to use the pen at all.
I won't slide on the screen, and it won't register correctly.
It has nothing to do with the "cure" time, left the protector in for 2 days, same results.
Zagg is flexible and rubber like, will render the pen useless.
Buy a "static" type of screen protector, they are almost not flexible at all.
It's working perfectly now that I have it.
Under the "accessories" part of the forum you should be able to find several on Amazon.
Avoid ZAGG!!!
Click to expand...
Click to collapse
Try using the CLEAR spen nib you found in your Note 10.1 box on the screen protector. It should slide easier.
I only use screen protectors for wacom from strongengineering.com. Unless they have changed their formula the screen protectors always have a nice paper feel. I simply love it. You can feel and hear the resistance of the nib when the cover is brand new. After a time and a lot of cross hatching and drawing it smooths out a bit. This is my very personal preference. I can't stand smooth glass-like screen protectors for drawing.
My position on screen protectors is this:
With the quality and hardness of the plastic coatings on most decent Android devices in the last 3 years, a screen protector can only be a net *downgrade* in terms of scratch-resistance and screen quality.
Scratches (and often fingerprints) will show up more on a screen protector than on the bare screen because a screen protector is usually less hard than the screen itself. This will particularly be the case with a pen stylus (ie one with a fine tip, as opposed to a capacitive stylus) which won't scratch the bare screen (because it's hardened) but will over time create wear marks in a screen protector in "high traffic" parts of the screen.
Granted, having the screen protector means that once the scratches all over it get too much, you can just pull it off (and replace it). And that is indeed the point of a screen protector. But I'd rather not have dullness from scratch marks all over my screen protector to begin with. It's a bit like the people who have plastic covers on their couches so they don't get stained. It ruins the whole point of having a nice couch surface. Reminds me of the quote "life is not a dress rehearsal". You may as well benefit from your scratch-resistant hardened plastic screen now rather than cover it, saving it for a day in the future that never comes.
All that said, some screen protectors are better than others and there are probably decent ones around. And there's nothing wrong with having a protective cover on the *back* or edges of your device, since this isn't a crucial operative part of the device.
There's no possible way a screen protector can negatively affect the way the pen works, as it's based on an electromagnetic field. So maybe if it were a metallic screen protector it would be an issue. The "grippiness" of a screen protector could be a problem though. Some are grippy and some not. Grippy ones like Zagg will render the pen practically unusable.

Screen Protector vs. No Screen Protector

When I first got my first A2, the rep at best buy put on the screen protector before I left the store... (keep in mind that this is my first "smart" phone of any kind, let alone android) ..so, I had never really known it without a screen guard/shield/protector until I got my 2nd A2 (and, subsequently 3rd).
The 2nd A2 I knew was temporary because of a dead pixel in the center of the screen (and other signs of refurbishment), so I never bothered putting on a screen guard. And with my 3rd A2 and I still haven't put one on - I have a brand new Zagg Invisible Shield just laying there, but it been over 2 months... And, I gotta say I like it much better.
Now this can all depend on the shield you use, but without a shield, the touch seems more responsive, the screen crisper, it's easier to clean...
I have a nice case that is raised a bit on the topside edges to help protect, and I never put anything else in the same pocket as my phone...
I know it's risky, but don't we have Corning Gorilla Glass already? Can you scratch that? And I do eventually have a contract upgrade coming anyway..
Thoughts? Preferences? Keep your minds out of the gutters..
I had a screen protector when I first bought the phone, and I got annoyed with it. The screen was dimmer, but the screen was less prone to finger prints. I still have it as it's reusable, but I left it in the car in the Florida heat, so the layers of it are peeling off. My screen also jumps and stutters when it's plugged in and fully charged to 100%. I should probably buy another one to preserve the screen seeing as how I don't upgrade until May.
alteredlikeness said:
I have a nice case that is raised a bit on the topside edges to help protect, and I never put anything else in the same pocket as my phone...
I know it's risky, but don't we have Corning Gorilla Glass already? Can you scratch that? And I do eventually have a contract upgrade coming anyway..
Thoughts? Preferences? Keep your minds out of the gutters..
Click to expand...
Click to collapse
I have to agree with you. I personally was super paranoid about scratching my screen and so I put shields from various companies on my screen to help protect it. The screen guard got dirty and so I took it off, and I love not having the screen guard on because of the reasons you stated.
I am pretty sure our phone comes with gorilla glass, but it isn't invincible. I have a scratch on my screen but it isn't noticeable when using the phone just when the screen is off. But I guess just keep it safe in a pocket that you don't have anything in and don't have sand chillin' in your pocket.
I've had this phone for almost a year and I didn't start using a screen protector until a couple of months ago. For some reason the screen on this phone scratches easier than my Captivate. I keep them in my pocket but the Atrix 2 has accumulated quite a few small scratches near the bottom of the screen and around the buttons.
I would rather not use one, but I would like this phone to last a while, even as a back up. I've tried several protectors and I've settled on the Great Shield clear protectors. You can get 3 for $7.99 on Amazon and they install easy and are pretty durable. You can also take them off, clean them and reinstall them without losing any adhesive properties.
i had a anti-glare screen guard which i used for 6months and one day due to some expt i was doing on my phone with skins it got off. havent put one back, have just one tiny 1mm scratch which is visible only if you look at it tangentially. have to say the colors look more vibrant and the touch is more responsive (might be due to OC and cm10).
Anyways, i have a case with raised edges, same as altered described, and i take extra care of my phone now. but since im keeping this phone for another year n a half atleast, will definitely get a new screen guard, (maybe one without the anti-glare effect, if i find one) cause gorilla glass Is prone to scratches.
Real men dont use protection...
Stay classy.
Initially I didnt use any "protection" LOL, but had two tiny scratches on the screen. Yes, it does catch scratches easily compared my previous devices, I tried these 1. Amzer anti-glare, will be good for 1/2 months then you will hate it, 2. Amzer Mirror Screenguard, gave me migraine (literally!) 3. Right now having Xtremeguard on it and like it.
There are basically two reasons why I get the screen protectors, to protect the screen obviously and the screen without protector is too slick for my liking, that's just my opinion.
My first A2 went from release day to this September when it bricked and was replaced. In that time frame i had only acquired 2 micro scratches never had a screen protector on it nor do I have one on my replacement. Also the glass is coated it's that coating that is scratch resistant. Watch this
http://www.xda-developers.com/xda-t...ass-drops-tests-composition-xda-developer-tv/
I have a serious thing against screen protectors and cases. I prefer my phone to be naked.
Screen protectors, no matter what you people say, make the screen worse in some way. The display is made to work well alone. They just all suck, and if you ever want it off, in a lot of cases, god help you, especially with self adhesive ones. They do however help prevent scratches, because you will just scratch the screen protector instead of the screen, so if that is important, you may want to consider it.
Cases, now this is just opinion. There is no doubt that they help prevent your phone from breaking, I just absolutely hate them. I don't like to bulk up my phone and make it ugly.
All that said, I take very good care of my phone. I have never dropped it, and I doubt I will, so there is no need for a case if you are careful.
P.S. yeah, gorilla glass is a joke, it still scratches. Just has a slightly higher hardness, and wont break as easy, but coins or keys will still do their job the same.
souljaboy said:
Real men dont use protection...
Stay classy.
Click to expand...
Click to collapse
Priceless!
Sent from my MB865 using xda app-developers app
First up I feel like a dunce picking up that Skinomi worth 7 green skins sucks bad bad. Totally not recommended.
Gorilla glass is in iteration 2 of implementation so that speaks for itself about our ver 1. Plus there is no Oleophobic coating on our device. I invested a massive 20 + $ greenbacks on Otterbox and though no complaints with usability it sure makes the phone bulky and downright fugly. None of the screen guards last more than three months until you need to put a new one.
In India, given the extreme dusty atmosphere in cities, a small two hour ride in public transport coats the phone with dust. Otterbox covers the all ports with covers so that's good. In my opinion just a slip in/out elegant pouch is the best option. Screenguard I reckon is required. Wish 3M made the privacy screen protector for Atrix 2.

Using the LG V30 without a screen protector.

Anyone out there using the LG V30 without a screen protector? I've gone through two of them already. Neither has yielded a good result. The latest has the edge curving to it, but the glue is only applied at the sides and bottom. The top of the phone is open. As a result, I get tons of lint and dust between the screen protector and the screen itself. And off course, since there is no direct contact throughout the middle of the screen, touch response and sensitivity is horrific.
For this reason, I'm considering ditching the screen protector altogether, but I'm really worried about scratching this screen. Gorilla 5 has its shortcomings in this area. What's the experience of other LG V30 owners been?
Got mine in december and I applied the same kind of glass screen protector right away, with glue only on the sides. And of course, lint and touch sensitivity problems just like you... I got quickly fed up, after a couple of weeks I ditched the screen protector an got a nice case (VRS Design -https://www.amazon.com/Vrs-Design-VRSV30HPSSS-Shield-Silver/dp/B0768ZVXGS). No scratches whatsoever til this day. The phone fell once on concrete from about four feet on the corner/screen, no damage at all thanks to the case - I guess.
My 2 cents : forget about the glass protector, get a nice case with significant lip around the screen and enjoy how smooth the naked screen is.
pomponazzo said:
My 2 cents : forget about the glass protector, get a nice case with significant lip around the screen and enjoy how smooth the naked screen is.
Click to expand...
Click to collapse
Agreed. Just don't put it in your pocket with your keys.
Sent via open market LG US998 V30/V30+
Wolfsbane58 said:
Anyone out there using the LG V30 without a screen protector? I've gone through two of them already. Neither has yielded a good result. The latest has the edge curving to it, but the glue is only applied at the sides and bottom. The top of the phone is open. As a result, I get tons of lint and dust between the screen protector and the screen itself. And off course, since there is no direct contact throughout the middle of the screen, touch response and sensitivity is horrific.
For this reason, I'm considering ditching the screen protector altogether, but I'm really worried about scratching this screen. Gorilla 5 has its shortcomings in this area. What's the experience of other LG V30 owners been?
Click to expand...
Click to collapse
I've had the phone since the end of December with no screen protector, and only a cheapo clear case that the retailer threw in when I bought it. I am a little rough in my devices as I work outdoors and the device is in and out of my pockets all day. It occasionally gets dropped or knocked out of the car mount. Not a blemish on it.
Sent from my LG-H933 using Tapatalk
This is the first smartphone I have not put a screen protector on. I did make sure the case has a lip (A Ringke Fusion).
So far, so good.
I never use screen protectors.
Sent from my LG-H931 using Tapatalk
Tried 3 different screen protector (ringke, ****ke and and other crap), never worked. So I am using it in case or many times in NUDE form because it has some beautiful curves, this phone
Same here, tried 4 different screen protectors then gave up and went nude. Best decision ever. I've had glass screen protectors on all my phone since they first came on the market. First time going without one.
Minor scratches will happen but usability, clearity and feel is SO much better that its worth it.
The only thing that bums me out is that the camera glass scratches easily. Heard its easy to replace but its stupid that its not sapphire glass.
I dont even use a case. Only have a black slickwraps skin on the back because i dont like the silver color. (Only silver and blue were available in my country)
I bought and use the skinomi matte screen protector and it works really well... In fact I got the same protector for the Note 8 as well.
I got a scratch on the first day that I got the phone, I don't know how or where but I did... That's why I always use screen protector, lucky for me I as able to buy a full glue when they were still available if I accidentally break it I don't know what will I do with my life.
I'm kind of different from others here.
Day 1 (August I think), I skipped the glass protector because I read from others on XDA that nothing was fitting right or didnt cover the edges of the screen. I put a plastic-like traditional protector on instead. It's been ok except for lots of grease and smudge buildup. I do have some scratches on the protector, but I wonder if they even would be noticeable if I hadn't had the screen protector on. The reason why is because of the plastic/rubbery texture of the screen protector. I feel like scratches would show up MORE on this protector vs the naked Gorilla Glass.
I'm really considering taking the protector off, but a little hesitant. Lol
I'm currently using it without the screen protector.
I've tried putting a plastic screen protector (wet install), and I've noticed it's soft almost like rubber, and also kind of sticky. After waiting for 3-4 days it remained too soft, so I just peeled it off. I haven't even tried any glass protectors after reading all of the reviews.
I mean, I would love if someone could suggest something that works well, and is $10-15 tops.
There is a whole thread dedicated to it, but the final conclusion is that nothing works except the whitestone dome which is nearly $50.
adsubzero said:
I'm currently using it without the screen protector.
I've tried putting a plastic screen protector (wet install), and I've noticed it's soft almost like rubber, and also kind of sticky. After waiting for 3-4 days it remained too soft, so I just peeled it off. I haven't even tried any glass protectors after reading all of the reviews.
I mean, I would love if someone could suggest something that works well, and is $10-15 tops.
There is a whole thread dedicated to it, but the final conclusion is that nothing works except the whitestone dome which is nearly $50.
Click to expand...
Click to collapse
Um...
https://forum.xda-developers.com/lg-v30/accessories/diy-coverage-glass-screen-protector-26-t3751954
ED2O9 said:
Um...
https://forum.xda-developers.com/lg-v30/accessories/diy-coverage-glass-screen-protector-26-t3751954
Click to expand...
Click to collapse
Yep I read that, but that's still a bit too expensive and too much work.
I think LG designed the curved edges to discourage users put a screen protector on it. LOL. I have been using it with no screen protector, but I have put it in a clear TPU that has lips. I dropped my phones a few times, sometimes face down, and luckily no scratches so far.
acefr said:
I think LG designed the curved edges to discourage users put a screen protector on it. LOL. I have been using it with no screen protector, but I have put it in a clear TPU that has lips. I dropped my phones a few times, sometimes face down, and luckily no scratches so far.
Click to expand...
Click to collapse
That is important, to have the lip protection on a case.
Sent via open market LG US998 V30/V30+
This my opinion if you don't care about resale value then go naked. Me I personally care about the resale value so I put a case and screen protector since I switch phones yearly sometimes less so I try to get as much money back as I can for the new phone or else I would go naked.
josemedina1983 said:
This my opinion if you don't care about resale value then go naked. Me I personally care about the resale value so I put a case and screen protector since I switch phones yearly sometimes less so I try to get as much money back as I can for the new phone or else I would go naked.
Click to expand...
Click to collapse
I care about resale value, and I definitely see the need for a case (especially with raised lips) -- but not a screen protector that makes the display less responsive. A friend and his wife just got these phones, wouldn't listen to me, PAID for screen protectors at T-Mobile. Within 3 days they ripped them off.
Just don't put the phone on your pocket with keys and coins.
ChazzMatt said:
Agreed. Just don't put it in your pocket with your keys.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Keys and coins don't scratch screens (there are dozens of Youtube videos that prove this), but a grain of sand will.
I never use screen protectors, and have never had any issues, but somewhere, somehow the v30 picked up a light scratch on the screen (but not from keys or coins).
338lm said:
Keys and coins don't scratch screens (there are dozens of Youtube videos that prove this), but a grain of sand will.
I never use screen protectors, and have never had any issues, but somewhere, somehow the v30 picked up a light scratch on the screen (but not from keys or coins).
Click to expand...
Click to collapse
That's because there could be particles of dust/sand/rocks in your pocket which could scratch the glass. I always baby my phones, yet I've picked up a couple of scratches.

Official OnePlus 6 Tempered Glass Protector. How does it Fare?

Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.
I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market
niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)
sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk
suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.
sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.
Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).

Categories

Resources