Database Info

Zagg invisibleshield inital review

Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.

sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead

Does it make the phone any less slippy to hold?

Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.

would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!

i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)

i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high

it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.

shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.

j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+​
1+​
1+​

what about touch sensitivity?

I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG

I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.

thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.

MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).

i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.

For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.

What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.

I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."

same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse

Realook Screen Protection (5 stars)

Just ordered and installed Realook screen protectors and I couldn't be more pleased. I have used other screen protection from Zagg and Sprint and I did not like them nearly as much. I will do my best to describe what its like but you really need to see it in person.
Feel:
The material is a firm plastic that when applied feels nearly the same as the bare glass. I did not like Zagg because it felt soft and textured like an orange peel. This stuff is 95% the same feel as glass and I waited 20 days before installing it, so I have a good level of comparison.
Look:
Clear as glass. I have not yet tested what effects it has on glare, but there is no noticeable difference indoors. Also it is ready to go 30 seconds after installing. All you need to do is push out the large air bubbles. It doesn't take 1 or 2 days to settle like some other protectors. Other people in this thread reported a rainbow reflection in the sun light when the screen is off.
Installation:
Before I started I ran the shower on hot to fill the bathroom with some steam to settle the dust. There is nothing that will bother me more than a single spec of dust under a screen protector, I will obsess about it to no end. Due to my rough and dry hands I am a dust machine and I have never failed to get at least 1 piece of dust under every screen protector I have installed. This time was no different. I mis-aligned the screen on installation and had to peel it back, when I did 1 spec of dust planted itself. I used a piece of tape they include in the box to peel back the screen, and another piece of tape to pull off the dust and it was clean. I am sooo happy about this point. Other protectors I used with adhesive would grab onto dust and never let go. Since it does not use adhesive so it is easy to put on and peel back off if you made a mistake.
The Bad:
Back button less responsive. It will still work on the first touch every time, but you do need to touch a little harder than before.
Box Includes:
2 screen protectors.
1 Wet wipe
1 Plastic card to push out air
2 pieces of tape(if needed)
1 microfiber cloth(to clean the screen before and after installation)
Sorry for the slightly blurry photos. Taken with another Epic4G and it doesn't like to focus on close ups.
$11 at Amazon

does it make the screen fuzy?

Perfectly clear. I wish I had a better camera to show it.
edit: I just discovered macro mode in the camera settings. I will post more photos soon.

Returned the Sprint speckled ones that was degrading display quality to the local Sprint store and am awaiting delivering of Realook for both Samsung Epic and Panasonic GF1 camera. Realook sounds like the best option and value out right now for the Epic until Steinheil Ultra Oleophobic is made available for comparison.

a holes wouldnt take mine back

+1 for Realook! Best screen protector i have used. Same experience as Pops.

I also went to Realook after Skinomi. Love Realook! Slick, smooth feel like the original glass. Relatively easy to apply. No screen degradation. Wonderful, all around.

does no opening for cam hinder it?

Anyone want to trade their spare ReaLook for a pair of PhantomSkinz screens?

I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.

churro7 said:
does no opening for cam hinder it?
Click to expand...
Click to collapse
Doesn't seem to. It is pretty optically clear. With 640x480, you probably wouldn't notice if there was any difference anyway.
tonysohn said:
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
Click to expand...
Click to collapse
I agree with all of those. I only have a gap on the bottom, though. Left and right seem to be exact.
I see the rainbow effect but it doesn't seem to cause any problem for me. I really don't notice it unless the display is off.
I do have the less responsive buttons, especially the back button. I'm wondering if I could slice off the bottom centimeter of the protector smoothly enough to make it worth trying.
Jason

I like it, but...
It's harder to clean than the Gorilla Glass of the Epic. It also has more friction than the Gorilla Glass. Your fingers won't glide across it as effortlessly. Finally, it has slightly rough edges that you can feel.
I should sell my unused RL screen for 5 bucks or something. Do people typically do that with their unused protectors?

Just ordered mine from amazon after reading this thread, i hope it is as good as you say it is. I have used Zagg a few times before, and Skinomi twice, and BodyGuardz on my nexus one. my favorite was BodyGuardz, but for 10 bucks i think it is worth trying this one. ill give feedback when it gets here in a few days.

If anyone wants another (good) opinion, here's a review from ppcgeeks.

I posted my review on realook a while back on ppcgeeks. Best protector ever IMO. http://forum.ppcgeeks.com/sprint-ep...king-screen-protector-tips-4.html#post1942030
Post #34
Sent from my SPH-D700 using XDA App

i use skinomi very nice and slick

I might give real look another chance but I used one on my touch pro 2 for a few months it looks and feels absolutely great however when i took it off today there was definitely some residue left behind. Swiping on the screen was not as smooth as when i first bought it. I just got my epic today and blew the installation of the clarivue protector. I don't think reallook has no adhesive, I think it has some adhesive so before I give them a try again i am gonna try boxwave and clarivue 1 more time.

the best protector IMO
I agree that the Realook protectors are the best. I installed mine a week ago and i'm really liking it. The look is awesome, the fit is perfect and it doesn't really have much more drag then the naked glass. The one issue is the fingerprints and oil residue. I can tell you that the phone is much more difficult to keep clean with the Realook, but that's not big of a deal. I used to just use my shirt or pants to wipe the phone clean, and now i have to use a microfiber. Even then it takes about two to three times the effort to get the oils off. I would still recommend this product.

I just got my real look in today (ordered thursday night) and i have a 10% off coupon code if anyone plans on getting one via amazon before the 30th.. pm me if anyone wants the code...
ordered from same link the OP posted $11 shipped so coupon will drop a buck off.. nothing much but I figured id throw it up here
UPDATE:the coupon is spoken for.

Ok i need to first say Pops_G you rock for informing me about this screen protector, and your method with the shower was genius, wish i did that when i installed all the other screen protectors in my past. On to my experience...
I just got the Realook Screen protector today, and i previously stated in a prior reply, i have tried zagg invisible shields, BodyGuardz ( OLD FAVORITE ) and Skinomi. The application of the Realook Screen protector was hands down, the Easiest ever, i didn't think it could go that fast. And in terms of how it looks and feels, I could not believe my eyes. You seriously cannot tell when looking at the screen that there is a protector on there. Zagg, Bodyguardz, Skinomi all have, in some regard, no matter how small, a orange peel effect, where there are small ripples in the screen from the water that is used in the installation process, they go away in time, but it is slightly noticeable. They also feel rubbery and take away from the graceful movements of the screen. Plus you have to turn off the phone, pull batter, use a water/soap spray mixture, worry about air bubbles, let it dry 24 to 48 hours, and wake a week plus for the solvent to evaporate. I had this Realook applied in 5 minutes, it would of been less, but i was super anal about making sure not a spec of dust was on the screen. lol.
Now this is just my first impression, after a hour or so of use. It is plastic which makes it feel very much like the original screen, although im sure that will allow the screen protector to scratch, unlike zagg, bodyguardz, and skinomis rubber film where they wont, unless you really try. And also it does show the finger oils more than the actual glass does. I am ok with this becasue that is the purpose of the protector, to get scratched and not the actual screen, Plus i have a backup because 2 came in the pack. GREAT DEAL. Second, i only see this screen protector working for phones that have a completely flat screen and have some sort of small lip around the phone. For Example: I dont think it would work best on a palm pre, which has no lip, and then it could be more easily peeled off down the line. But for the Epic 4g... Seriously im in love.
Thanks again Pops_G

Case-mate barely there - - mini review

I just received my Case-mate barely there case today from play.com & thought I'd give a mini review ago.
It comes in a smartly packaged box, upon opening the box you have in your hand a moulded abs plastic shell & a sealed packet containing a screen protector, micro fibre cloth & a piece of soft card.
The shell is easy enough to put on, it's just a simple push to fit design that works really well.
The actual fit of the Case-Mate barely there is superb with the power & volume buttons being easy to access as are the mini usb port & 3.5mm socket while also giving the camera & speaker unobstructed access.
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
The Case-Mate barely there itself was purchased to improve the grip of the phone which as we all know is a little slippery & protect the rear cover from getting scratched & knocked, well the Case-Mate barely there does improve my hold on the Galaxy S but not like I was hoping it would .
The case wraps around the rear of the phone following the Galaxy S contours like a second skin, I can see this case giving great protection to the corners & rear of the phone.
So in all a well made case that fit's superbly, gives easy access to the various button & connectors whilst saving corners & back cover from scratching & knocks. And like it's name implies you'll barely notice it's on the phone.
My only gripe is it feels a little to silky for my liking, I was hoping it would have a rubberised back for improved grip something a little like a silicon case feel.

nice review. i just ordered mine, so it's gonna be a long wait before i get it.

Thanks for the review. I also purchased mine, it was shipped today, can't wait to get it.

I know what you mean about the feel of the case. I have one on my ipod touch but only because I couldn't get a Flexishield case for it. I have a Flexishield on my Desire and am about to get one for the SGS. For me it has a better feel to it and fees less slippery.

Great review, I ordered mine about 2 weeks ago. Hopefully it comes in soon

Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.

Very nice case

jonni3 said:
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
Click to expand...
Click to collapse
Seriously that keything doesn't mean crap. You think it's the BIG things in your pockets that do the scratches? It's not. Take any sandpaper and swipe ONE time over the glass of the SGS and you'll have tons of scratches, you don't even have to press very hard. It's generally not your keys, a screw or a screwdriver in your pocket that cause scratches, it's tiny grit that does. Every time you wipe the screen you risk scratching it if there's the wrong kind of dirt on either the screen or the cloth you use. That's why people can be however careful and still get scratches, just read around, you'll see. Everyone doesn't bull**** you when they tell you they take good care of their phone.

Ok recieve my silver casemate, some low res pictures here. I'll take very good ones later when I get back a hold of my APN charger.
http://picasaweb.google.com/114505993397088135290/CasemateBarelyThereSilver#5524273441974319986
Anyway just imagine OP's picture with that kind of grey/black/silver reflections.

It looks kinda glossy, how is the feel of the case?
I've noticed with mine it's started to feel a bit more rubberized now it's been handled.
@ mickeko
About the screen protector you have a valid point & I am now going to have to rethink not having one.
Sent from my GT-I9000 using XDA App

Yea the screen protector looks ugly ^^ it breaks the harmony of the phone in the area around the front facing camera, you can clearly see the protector cutout that is quite ugly. You do not have this problem on silicon cases as they often cover the side cutout. However I would never go without a screen protector without a pouch, the dust level of my pockets are way too random to take the risk of the godamn dust scratches (the silver case also has that little problem, but they are only visible if you search for them micro scratches of doom).
The case feels good, no creaks.
It's not very glossy, or at least I won't call that glossy, in fact it acts like a mirror if you face it at 90° incidence. But if you tilt it even by 5/10 degrees in mid light conditions, it takes a very nice and not glossy dark/grey silver tint similar to the one of the original chrome bezel of the SGS. They both blend very very well. It is really a BARELY THERE experience. very thin, very stylish. Nearly to the level of a naked iphone 4.

Sounds pretty good & seems like your more than happy with it
These case's really complement the phones shape & add very little to the overall dimensions, know what you mean about the screen protector it's not really that attractive, I'm looking for one that covers the entire screen from edge to edge so it doesn't notice.
Looking at your pic's on the pc & it does seem to have that smoked chrome effect like the bezel on the SGS

Indeed but the SGS bezel is a little more greenish/blueish in tint but it is barely noticable (you had to get me to check it closely in white light to notice it), both have the same reflection behaviour however which is why it blends very nicely.
I also notice a very faint rainbowish halo (probably there from transparent coating material used over the silver layer) in the backplate reflections, well, it's kind of cool actually.

My barely there case just came in, I must say very nice case.
My girlfriend has a cheap ebay one, and this is definitely worth the price.
Good job case-mate

epicfailguy2 said:
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Click to expand...
Click to collapse
Just a heads up. I had a metallic 'silver' case-mate barely there on my Desire and it murdered the 3G signal strength. Swapped it for the plain black and it was fine. Dunno if you have that issue with the SGS.

Signal is the same, didn't notice any change 4bars in town.

Just picked mine up today and couldn't be happier with it. Slides in and out of my pocket fairly easily and adds some structural support to the phone which you could argue is a little lacking.
So far I'm very happy with it; I was quite skeptical as I was a long time iPhone (indestructible 2G model) owner and have never used a case.
Haven't had a chance to add the screen protector.

Told you I was going to make it up for the crap ass webcam pictures
http://il.youtube.com/watch?v=OHLglrlRsrw

Where did you guys purchase this at?

EarlZ said:
Where did you guys purchase this at?
Click to expand...
Click to collapse
Asking about Barely there case?
http://shop.ebay.com/?_from=R40&_tr...rely+there+galaxy+s&_sacat=See-All-Categories
Although I see there are no black ones or metallic at the moment, only pink
Just got mine two days ago and must say this is the perfect case for my SGS, could be a little less slippery, but still definitely worth it's money.

Martin Fields Screen (+ Rear) Protector

Having used Martin Field Screen protectors in the past on all sorts of gear I jumped on them as soon as they became available for the N4. I now have both front and rear fitted and hears what I think.
As usual the material used is very good. Scratch resistant, smooth and doesn't seem to degrade the image at all.
Firstly, the rear protector. This comes with a cut-out for the flash but not the camera. I don't know whether this will really be a problem in practice as I haven't had time to take many photo's with it on yet.
Otherwise, the dimensional fit on the rear protector is great and you barely tell it is there.
Secondly, the front protector. As with other protectors I have tried (Terrapin), width wise this matches the active screen area so you can feel a slight ridge when you swipe on from the edge. Not really a problem in reality.
However the N4 screen, like the GNex before it has a slight roll off at the top and bottom which means that you cant really get edge to edge coverage with this sort of protector. What you have to live with is a slight unprotected border.
In this respect, the Martin Fields protector is a little too large top to bottom and when fitted doesn't sit flush with the screen for an approx 1mm along the top and bottom. You can't really see it face on but it will allow dust and fibres to work in if you keep it in your pocket.
I've emailed Martin Fields about it and they have requested some photo's so they can look into possible revising it. I've sent these to them now and I'll update when I get a further response.

Nice post. Any pics? Always liked MF stuff.

quahog_convo said:
Nice post. Any pics? Always liked MF stuff.
Click to expand...
Click to collapse
As MF may do something about the fit yet. I don't want to post pics of the issue as it would be bad publicity for them. Let's see what the come back with first, I'm confident that they will sort it out.
A pic of the back of the phone wouldn't help either, you really can't tell it is there.

I LOVE Martin Fields! Glad that it finally came out for the N4, but I already jumped on the too good to pass up 50% deal for ZAGGs. Couldn't wait any longer to leave my device unprotected.
Please update whenever you hear back from them
and here's the link for anyone who wants to order: http://www.martinfields.com/US/MFOP-GoogleNexus4

I bought these as well, pretty pleased with them, it's true that height wise it doesn't quite reach to the bottom (1mm short), it's not noticeable if you have a case that covers it. Certainly it isn't as bad as Terrapin, those were like half a cm short. The back protector is pretty much perfect, the cutouts align perfectly, you also get a separate protector for the flash.
Should also mention this does not come with a proximity sensor cutout, however, it works absolutely fine. I asked them before buying it and they assured me it would work.
If you're in the UK you can get these from a few online shops for around ~£16 so pretty decent.

at this price.. it's basically tempered glass price. With that said, anyone experienced both and do a quick compare/contrast?

There aren't any tempered glass protectors out yet are there? Wouldn't say it's in the same price range as tempered glass, you have to remember you get front and back.

i was just talking about comparing in general with devices that already has these on before and tempered. Right now, there aren't any tempered glass available yet, pre-order only.. There will be more tempered glass and once it's widely available, it will be around $20 or cheaper.

maxj3000 said:
I bought these as well, pretty pleased with them, it's true that height wise it doesn't quite reach to the bottom (1mm short), it's not noticeable if you have a case that covers it. Certainly it isn't as bad as Terrapin, those were like half a cm short. The back protector is pretty much perfect, the cutouts align perfectly, you also get a separate protector for the flash.
Should also mention this does not come with a proximity sensor cutout, however, it works absolutely fine. I asked them before buying it and they assured me it would work.
If you're in the UK you can get these from a few online shops for around ~£16 so pretty decent.
Click to expand...
Click to collapse
IMO, I think they need to be a bit shorter height wise so the edges adhere to the screen and don't sit proud. I don't think any dry application protectors would ever give complete edge to edge fit, they would always lift at the extremes due to the curvature.

I too have used Martin Fields screen protectors in the past & thought they were fantastic! I'm not that impressed with the fit of this one though.
I've fitted the Skinomi, which is a 'wet apply' one. It completely covers the screen, & was real easy to apply. So far it feels fine to use too.
Sent from my Nexus 10 using xda app-developers app

ChrisJ said:
Having used Martin Field Screen protectors in the past on all sorts of gear I jumped on them as soon as they became available for the N4. I now have both front and rear fitted and hears what I think.
As usual the material used is very good. Scratch resistant, smooth and doesn't seem to degrade the image at all.
Firstly, the rear protector. This comes with a cut-out for the flash but not the camera. I don't know whether this will really be a problem in practice as I haven't had time to take many photo's with it on yet.
Otherwise, the dimensional fit on the rear protector is great and you barely tell it is there.
Secondly, the front protector. As with other protectors I have tried (Terrapin), width wise this matches the active screen area so you can feel a slight ridge when you swipe on from the edge. Not really a problem in reality.
However the N4 screen, like the GNex before it has a slight roll off at the top and bottom which means that you cant really get edge to edge coverage with this sort of protector. What you have to live with is a slight unprotected border.
In this respect, the Martin Fields protector is a little too large top to bottom and when fitted doesn't sit flush with the screen for an approx 1mm along the top and bottom. You can't really see it face on but it will allow dust and fibres to work in if you keep it in your pocket.
I've emailed Martin Fields about it and they have requested some photo's so they can look into possible revising it. I've sent these to them now and I'll update when I get a further response.
Click to expand...
Click to collapse
Hi Chris,
Just got my Nexus 4... finally...
Bought a wet screen protector that I will probably not apply.
Used Martin Field's before and I now I wonder if you received any news from them and how is everything going after using it for 6-7 weeks.
Any problems with the camera being covered?
Looking forward to your feedback.

maxj3000 said:
There aren't any tempered glass protectors out yet are there? Wouldn't say it's in the same price range as tempered glass, you have to remember you get front and back.
Click to expand...
Click to collapse
Clarivue and XGear both have tempered glass shipping between Feb 15 and March 1.
Sent from my Nexus 7 using xda app-developers app

Official OnePlus 6 Tempered Glass Protector. How does it Fare?

Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.

sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.

suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.

I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk

Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!

^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.

unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market

niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)

sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk

jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.

the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money

unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?

I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.

I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?

This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk

suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?

JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.

sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on

suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.

Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).