Hello everyone!
I had some stability issues on my Samsung GT-I9003, so I flashed it . And, as the title says it, I'm stuck in a bootloop. I've tried 3 or 4 flashings with different packages. Some where "One packages", with one unique PDA, or I tried the XXKPE with everything. And I'm lost. I never get past the first boot screen.
[EDIT]
I found a way to boot it, but the touchscreen isn't working, so I'm now stuck on the language selection page...
Is it my ROM who doesn't fit?
[/EDIT]
Thanks!
Before going to download mode try wiping everything, then flash xxkpe TWICE then wipe again. Make sure you flash it correctly. And odin shows PASS. Try flashing the latona.pit included in xxkpe.
Press thanks if it helped..
Sent from my GT-I9003 using XDA
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
so weird. Where did you download your xxkpe. Try here
http://forum.xda-developers.com/showthread.php?t=1004647
then follow the guide here
http://forum.xda-developers.com/showthread.php?p=14933114
I think you just fail a step on flashing a rom.
---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------
Flashing bagaria root is done after flashing a stock rom for it to be rooted. You failed to put CSC file in odin maybe. Follow the guide above perfectly then everything will be fine.
You start the procedure on Step 3 if your done downloading XXKPE here
http://forum.xda-developers.com/showthread.php?t=1004647
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
/stl11 is the /cache partition.
look like you fail to flash pit file, or u flash "one package .tar file" with partition ticked in odin.
see below for the samsung recommend setup
flash pit file with all the firmware one short.
if you flash from Froyo to GB, i recommend to flash the bootloader update.
however, flash on you own risk.
100% Work!
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
For those who are struck in boot loop or Softbrick their mobile do the following things exactly as they had mentioned. I followed them and boom my phone is back to normal.
For bringing your phone back to download mode (Recovering from Softbrick)
http://forum.xda-developers.com/showthread.php?t=1411768
After entering into download mode (reinstall Ginger bread )
http://forum.xda-developers.com/showthread.php?t=1133787
Note: This step deletes your user data, so be sure what you are doing
Definitely your phone should be back to normal if you follow these steps exactly.....
Million Thanks to all those who helped me in bringing back my mobile to normal function....
Hi, I am facing the same issue with a GT-I9003 as jonasdu91. I tried all the solutions mentioned above, tried all sort of firmwares. The only time the phone responded was when I flashed the bagaria file. That too ended up with a non-responsive touchscreen at the language selection screen.
Could anyone suggest what more could I do to get the phone to upgrade?
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Worked for me too!!! You saved my life! Thanks!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Good!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
How do I flash other stock rom after that? I've tried to flash XXLE4 rom, and received boot error and unmounted FS
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
YLNdroid said:
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
Click to expand...
Click to collapse
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
Put the files like this:
PIT - latona_20110114.pit
PDA - I9003XXKC1-REV08-PDA-low-CL964212.tar.md5
PHONE - MODEM_I9003XXKC1_REV_00_CL964949.tar.md5
CSC - GT-I9003-CSC-SERKC1.tar.md5
Click to expand...
Click to collapse
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
xumix said:
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
Click to expand...
Click to collapse
xumix, thank you very much for your response.
I believe, the 5 files contained within the I9003XXKPE_Odin3_1.8.5.zip package, would correspond to the options available in PC ODIN3 v1.85, as follows -
PIT > latona_20110114.pit
BOOTLOADER > APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PDA > CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PHONE > MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5
CSC > GT-I9003-CSC-MULTI-OXAKPE.tar.md5
Click to expand...
Click to collapse
Am I right?
:silly:
YLNdroid said:
Am I right?
:silly:
Click to expand...
Click to collapse
You are right
xumix said:
You are right
Click to expand...
Click to collapse
xumix, I flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, but to no avail. The boot loop on the Samsung boot animation continues to persist.
EDIT
I have noticed there is a u1_02_20110310_emmc_EXT4.pit, contained within the Odin3-v1.85 folder. What is this, PIT file for?
I re-flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, and the process completed successfully. But, since the boot loop at the Samsung boot animation persisted, I pulled the battery out, and booted into Recovery Mode, not once, but on two separate instances. I was able to perform a wipe data/factory reset, on the second instance. I also performed a wipe cache partition and rebooted the device. But, the boot loop issue still continues.
I have attached images of both instances, I clicked using another device, to this post.
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Sent from my GT-I9003 using Tapatalk
chongns said:
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Click to expand...
Click to collapse
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
YLNdroid said:
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
Click to expand...
Click to collapse
Friends, I still await your expertise.
:fingers-crossed:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Okay, so I attempted to unroot and flash the stock 5.0.2 software and I got a error on the download screen. It says SW REV. CHECK FAIL. DEVICE: 3. BINARY: 1.
If you have no knox install MM official then flash this kernel tar file (AP) https://drive.google.com/folderview?id=0B40ItdHKfkyQcTA5bnRPWDg0X28&usp=drive_web#list it will boot to mm 5min :good:
Btw you cann downgrade from 5.1.1 to 5.0.1 you just go up not down
zach616 said:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Click to expand...
Click to collapse
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
emcardle660 said:
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
Click to expand...
Click to collapse
will try and update. thank you. didnt work.
Okay guys so now I need a ROM to flash using ODIN. I tried to download from sammobile but the speeds are too damn slow. What I tried to flash was this file " G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 " and i got the error 3 to 1.
Download Samfirm from here, XDA itself.
Run samfirm, enter model as G920F and your region code.
It will download from Samsung servers, so high speed.
Now flash using Odin the downloaded file by putting the phone in download mode, (vol down+home+power on).
How did it happen?
Did you try to flash the VOD 6.0.1 and got stuck towards the end at hidden.IMG failing the process?
If yes, then its a two minute job. Just open the 6.0.1 tar archive and look for hidden.IMG extract it anywhere and rename it from "hidden.img" to "hidden.img.tar".
Note flash this hidden.img.tar as AP in download mode, your phone should boot.
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
bednim said:
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
Click to expand...
Click to collapse
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
MAX 404 said:
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
Click to expand...
Click to collapse
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
bednim said:
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
Click to expand...
Click to collapse
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
MAX 404 said:
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
Click to expand...
Click to collapse
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
bednim said:
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
Click to expand...
Click to collapse
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
MAX 404 said:
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
Click to expand...
Click to collapse
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
bednim said:
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
Click to expand...
Click to collapse
When you get home, just try installing "Samsung Smart Switch" (it's no longer Kies) (http://www.samsung.com/sg/support/smartswitch/Smart_Switch_pc_setup.zip)
I understand that you already have drivers on your PC, but the Samsung Smart Switch might come with some updated drivers for your Samsung S7, which might change the scenario. Installing that, plus using another version of Odin (run it as Admin). I used this one just today. (http://dl.sammobile.com/Odin3-v3.11.1.zip)
If the flashing the recovery still fails, try flashing Stock rom under AP like suggested earlier. If that still fails.
Use Samsung Smart Switch's "Emergency recovery" but do the Initialization (2nd tab) by inputting your Phone model and let Smart Switch download the official firmware from Samsung's servers.
This must be done while your phone is in Download mode, so make sure you have enough juice to wait out the download process.
Good luck!
Hi there!
I wanted to install a new recovery form this guide: https://forum.xda-developers.com/showthread.php?t=2663834
The phone has a stock ROM and stock recovery. I can easily go to download mode, boot it even after Odin fails to flash.
The thing is when I flash the recovery, Odin gets stuck at "Getting PIT file for mapping" or something like that and aborts flashing. No bars at phone screen while flashing (it's in the downloading mode), just nothing.
I tried flashing on different computer, different usb port/cable, different recovery and the result is still the same. Sometimes I recieve "Cannot open the COM port." error.
What can I do?
Would you flash custom recovery and root your phone?
First of all upgrade Odin version.
Which extension have cwm recovery file?
Uncheck "Re-Partition" box before the flashing.
Yea, i would to flash some ROM and root my phone
Odin 3.12.3
Tried also with older verisons
File ext: .tar.md5
everything is unchecked during the process
Do you use original samsung cable?
Restart the pc and the device. Try again to flash. If fails just put stock pit file in PIT section, tick Re-Partitions and flash it with recovery in PDA section.
Most of this issue fixes are "I solved it by plugging the cord into another port and letting windows rediscover the phone".
I used original samsung cable, didnt work.
Also adb doesnt see the device when its in downloading mode but I think thats normal.
Where can I get the stock PIT file and is it more risky when i use it?
I'll try with another port and will let know
Ive found some thread here with .pit file:
https://forum.xda-developers.com/showthread.php?t=2428753
is it the pit file that i should use?
foralost said:
I used original samsung cable, didnt work.
Also adb doesnt see the device when its in downloading mode but I think thats normal.
Where can I get the stock PIT file and is it more risky when i use it?
I'll try with another port and will let know
Ive found some thread here with .pit file:
https://forum.xda-developers.com/showthread.php?t=2428753
is it the pit file that i should use?
Click to expand...
Click to collapse
Yes, it is. Choose the right version: i9105P (NFC) - i9105 (no-NFC)
Just before flashing I have a question.
Does the flashing now with .pit file will re-create every partition on the phone causing ALL data to be erased? It would be a problem if after repartitioning odin would be still unable to flash the recovery, wouldn't it?
foralost said:
Just before flashing I have a question.
Does the flashing now with .pit file will re-create every partition on the phone causing ALL data to be erased? It would be a problem if after repartitioning odin would be still unable to flash the recovery, wouldn't it?
Click to expand...
Click to collapse
Pit erases all your partition and removes all datas. Recovery hasn't problem with stock pit file.
Went like a charm without using PIT file (unchecked Re-Partition). It went by using different USB Port and I don't know, maybe the fact that I put the pit file also with the recovery image in the same folder.
Damn, this Odin-issue can be very annoying, I tried like over ten times and nothing and now it just went all straight forward for the first time. Thanks for replying!
foralost said:
Went like a charm without using PIT file (unchecked Re-Partition). It went by using different USB Port and I don't know, maybe the fact that I put the pit file also with the recovery image in the same folder.
Damn, this Odin-issue can be very annoying, I tried like over ten times and nothing and now it just went all straight forward for the first time. Thanks for replying!
Click to expand...
Click to collapse
Good news. You're welcome!
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
What model does your phone say in download mode, and what firmware did you flash?
Beanvee7 said:
What model does your phone say in download mode, and what firmware did you flash?
Click to expand...
Click to collapse
Sorry,
it is a G930F
I downloaded the File from SamFirm (G930FXXU2ERE8_CL13438344_QB18102270_REV00) and used Odin3 v3.13.1.
any solutions?
I have exactly the same Problem.
Did you find a possibility to fix that ?
I´m going crazy with that my device is unrootet and on stock Rom when it came into bootloop , i tried to fix it with Odin a couple of times used the latest Firmware from Samfirm but it doesnt work and gets stuck on erasing Screen and keeps on restarting . I can always get into download mode but i cant open the recovery . Another thingis that my System Status in the download mode says custom ?? i never flashed a custom Rom on it Does anyone know if i can bring it back to Samsung like that because i still have a guarantee
i would be so thankful for your help guys
cheers
Had a similar issue before with an S6, and one of the workarounds that works for a lot of samsung issues is to flash the phone through ODIN with a repair firmware and a pit file. If im remembering right the firmware files are AP, CP, BL and CSC, also the pit file. you gotta check repartition in odin too.
any idea how to fix this ? In the same boat, can't figure out how to solve this.
same thing happened to me, i can't get it to work
spittfire said:
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
Click to expand...
Click to collapse
hi have you solved then? I've got the same problem
can´t believe there is no solutions for this
i have the same problem with a galaxy A20 SM-A205G
i flahshed diferrent ROMs from diferent countries, with PIT FILE and without it and nothing works
maybe the difference with other posters here is that i can access to recovery mode but i dont find anything about fix this phone from recovery mode or something like that.