Hallo,
When I connect the tablet using a USB cable see in Device Manager: "Andorid Phone" - "Asus Transformer Prime APX Interface"
(APX driver installed).
On tablet display is only black screen.
Is there any way to do this tablet's bootloader record? I have no backup files...
please reply... Thank you!
maxXx_cz said:
Hallo,
When I connect the tablet using a USB cable see in Device Manager: "Andorid Phone" - "Asus Transformer Prime APX Interface"
(APX driver installed).
On tablet display is only black screen.
Is there any way to do this tablet's bootloader record? I have no backup files...
please reply... Thank you!
Click to expand...
Click to collapse
No. You need the backup files to use APX at all. See my signature for more NvFlash information.
Related
Hello members,
I have a strange issue with BRK's Toolkit when I want to root a B60 Transformer.
APX is recodnized, but when I click on the Backup up and root button, then the sound plays (device disconnected) and the tool says, Pad not in APX mode.
I have installed the x64 drivers for my Win 7 64 OS and put to apx mode correctly.
Any ideas?
davebugyi said:
Hello members,
I have a strange issue with BRK's Toolkit when I want to root a B60 Transformer.
APX is recodnized, but when I click on the Backup up and root button, then the sound plays (device disconnected) and the tool says, Pad not in APX mode.
I have installed the x64 drivers for my Win 7 64 OS and put to apx mode correctly.
Any ideas?
Click to expand...
Click to collapse
Problem with your USB connection? Don't connect to a USB hub, or try another USB port.
brk said:
Problem with your USB connection? Don't connect to a USB hub, or try another USB port.
Click to expand...
Click to collapse
Don't have a hub, tried every single USB on my motherboard. Still rejects it.
Still nothing. Can be that it has the latest ww 8.6.5.13 version?
BTW, I get this screen (attachment)
Can you run the command via a command window? This would actually show the error message so you could figure out what's going wrong.
davebugyi said:
Still nothing. Can be that it has the latest ww 8.6.5.13 version?
BTW, I get this screen (attachment)
Click to expand...
Click to collapse
It's not the firmware, it's that you have a B80 model, partway through B70 models the conventional root method stopped working.
hi
i bought a transformer last night
it has B50 serial number
it has 3.0.1 hc and i update two times with OTA and now it is on frimware 8.6.5.13
the problem is that i cant get into APX mode
i turn it off and press vol up+power same time but screen is blank
sorry for my language
It's supposed to be blank
Its supposed to be blank. If your in windows open device manager and see if its installed under USB or Portable Devices. Make sure you install the correct drivers for it. If you are running linux type "lsusb" into console to display connected usb devices. Also when using adb you can do "adb devices". It will show if your device is connected "properly"
thank you guys
FIXED
I still can not get my TF101 to connect to my windows 7 64bit computer. I have downloaded asus sync, naked drivers, I have installed the stock update from asus causing me to lose root. I can transfer files using filezilla but would really like to be able to connect through usb. I think the tablet itself is missing something. Right before I tried the stock asus update when I was in CWM it said it could not mount E: I think and that something was not there but I can not remember. Does anyone have any suggestions? Thank You.
Model number TF101
Android version 4.0.3
GPS version V6.9.12
Wi-Fi version 6.1.1.24
Bluetooth version V8.30
Touch panel version MXT-1.1 build-1
Kernel Version 2.6.39.4 [email protected] #1
Build number IML74k.US_epad-9.2.1.27-20120615
Do you still have CWM installed?
Also, is your tablet recognized if you enable USB Debugging?
No I am stock no root
Sent from my Transformer TF101 using xda app-developers app
Seeing as how this is the 2nd thread you have on basically the same topic (much better to keep all the replies in one IMO), I still do not see where you confirmed or denied specifically if your tablet can be seen by windows when USB Debugging mode is enabled and the tablet is booted up.
I do apologize for a second posting. I also did not see that question. No my pc does not see it on or off or apx
Sent from my Transformer TF101 using xda app-developers app
When it is on, booted up and has USB debugging checked in settings.
This is different from APX mode.
frederuco said:
When it is on, booted up and has USB debugging checked in settings.
This is different from APX mode.
Click to expand...
Click to collapse
Same thing I get a pop up that says One of the USB devices attached to your computer has malfunctioned. In device mgr it comes up with an unknown device (code 43) nothing else is there even with show hidden devices.
Ok here is my problem and I will try including all the relevant information that I am aware of. I can't see my TF300T when I enable fastboot mode on the tablet.
1. I turned on usb debugging in tf300t settings
1. I unlocked the tf300t using tool from ASUS
2. I installed the android sdk kit
3. turned off tablet
4. Plugged tablet into usb
5. Held power off and volume down ( boots up with 3 icons. RCK Android Wipe ) pc comes up with failed usb device. I go into device manager and
under usb controllers it shows unknown device. I click update driver select the naked driver winsub and it says it is not compatible. I tried deleting device and rebooting etc but no matter what I do or what driver I use I can't get the computer to recognize the tf300t in fastboot mode. It will work fine when it is not in fastboot mode I can transfer files all day long. but no matter what I do I can't get computer to recognize the device in fastboot mode.
Computer.
asus H87-pro motherboard
8gb ram
Intel I5 Haswell
OS
Windows 7 Home Premium Service pack 1
I am really befuddled and could use a hand.
Moose66 said:
Ok here is my problem and I will try including all the relevant information that I am aware of. I can't see my TF300T when I enable fastboot mode on the tablet.
1. I turned on usb debugging in tf300t settings
1. I unlocked the tf300t using tool from ASUS
2. I installed the android sdk kit
3. turned off tablet
4. Plugged tablet into usb
5. Held power off and volume down ( boots up with 3 icons. RCK Android Wipe ) pc comes up with failed usb device. I go into device manager and
under usb controllers it shows unknown device. I click update driver select the naked driver winsub and it says it is not compatible. I tried deleting device and rebooting etc but no matter what I do or what driver I use I can't get the computer to recognize the tf300t in fastboot mode. It will work fine when it is not in fastboot mode I can transfer files all day long. but no matter what I do I can't get computer to recognize the device in fastboot mode.
Computer.
asus H87-pro motherboard
8gb ram
Intel I5 Haswell
OS
Windows 7 Home Premium Service pack 1
I am really befuddled and could use a hand.
Click to expand...
Click to collapse
Try using this guide:
http://forum.xda-developers.com/showthread.php?t=2139767
Thanks
Just a quick update. I used a different computer that I had never plugged the tf300t in and before I plugged it in, booted it into fastboot, It showed up as a fastboot device and installed the naked driver. So that problem is solved.
(solved)
dear sir;following an flash attempt of the recovery clockworck ,my tf300t is locked.when i start my tablet with the asus page
it s impossible to connect with adb this one is recognised with apx mode
how can i restore my tablet ?
thanks for your help.
driver adb +sdk +asus installed with my computer windows 7 x64
thanks !!!!
Bootloader not accessible
I think I have the same problem. I cannot access the bootloader with power on / volume down anymore after installing CWR. My TF300T always starts with the Asus screen until the battery gets empty.
Any chances to solve this issue?