Database Info

[Q] help my phone is stuck in clockwork recovery mod

please help me, i try to update my o3d from 10b to 10d, i used wifi after download telephone ask me to reboot, but after trhat my phone just stuck in recovery mod (clockwork mod) i try to restore my phone is success but always stuck in recovery mod i dont know what i must to do now, please help. p.s i root my phone

you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 seconds, run LG mobile update connect battery and usb cable hold power and volume up hold it for 10 seconds let go then do it again for 10 seconds LG update should say phones connected
click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update

thank's for the quick respond, i do what you said but its fail to update because it said some irreversible error, i dont know what i must to do next, please help.
edit:
always stuck in clockwork recovery, yes i can move to backup via recovery but when i try to boot always return in recovery i don't know what i must to do next i think i just brick up my o3d

bnorontako said:
thank's for the quick respond, i do what you said but its fail to update because it said some irreversible error, i dont know what i must to do next, please help.
edit:
always stuck in clockwork recovery, yes i can move to backup via recovery but when i try to boot always return in recovery i don't know what i must to do next i think i just brick up my o3d
Click to expand...
Click to collapse
keep trying

Stuck in CWM
Silly question but have you tried wiping data (factory reset) & wiping all cache in the cwm options, Then try to recover?
Just a thought please update with results....
Regards
Mark

yes , i do that to, i've done factory reset even twice but still stuck in recovery
edit;
after 15 times trying (ik911 method) finaly i can download from emergency and install the firmware but when i reboot phone my screen stuck in firmware update, for how long i must wait this screen? because it already half hour and i dont see nothibg change

do the recovery one more time should work after that
Sent from my LG-P920 using Tapatalk

It will be stuck there forever!
There is no solution yet to fix this problem... Now you can only send it in for repair or wait for a possible fix...

thank's for respond, yes i already recover 3 times but still stuck in update screen, i think it's forever stuck, i will sent it to repair monday, it's hard to find repair open in saturday

Same problem here... Firmware Update Screen und no chance to get the phone to work... I tryd 3 times emergency mode... always the same...
I hope, someone has a idea?

hai kellerfelix, until now i cannot resolved my problem too, and i already talk with lg support, and they said that i must repair my o3d, nothing can fix it

__________

yes i have clockwork that is my problem, first stuck in recovery mod (clockwork) i had done anything possible with clockwork restore, reset etc etc you name it a thousand times but nada my phone is stuck in recovery mod and then i try emergency recovery via lg tools it success to download and install firmware and then when i reboot its stuck in update screen and i cannot enter the recovery mod anymore because it's not root with new firmware

Renegade_Rulez said:
It will be stuck there forever!
There is no solution yet to fix this problem... Now you can only send it in for repair or wait for a possible fix...
Click to expand...
Click to collapse
I've been in that situation twice, Flashing the update kdz through USB should fix it.
In any case, I could use the following information from someone in this situation: while in recovery, open an adb shell on the phone and type each of these:
Code:
echo "522 1" > /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
echo "518 1" > /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/static_nvdata_raw_read
echo "522 1" > /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
echo "518 1" > /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
cat /sys/kernel/kobject_lge_nvdata/dynamic_nvdata_raw_read
I need the output of each of the "cat" commands.

It's impossible to use adb the phone only displays the updating firmware screen that's all... I can put it into recovery mode without battery and pressing power and up but flashing via LG update tool will get you back into the firmware update screen
Sent from my Optimus 2X using XDA App

Renegade_Rulez said:
It's impossible to use adb the phone only displays the updating firmware screen that's all... I can put it into recovery mode without battery and pressing power and up but flashing via LG update tool will get you back into the firmware update screen
Click to expand...
Click to collapse
Vol-up+Power is download mode, not recovery. Still, that's strange. The LG Update tool should have installed the stock recovery, which wipes everything on the phone (including boot flags). Have you tried booting with Vol-down+Power to enter recovery?
And if that doesn't work, have you tried the KDZ Updater tool?

If you hold volume down + power it will power on and off again if you release power after LG logo I get firmware update screen, which kdz updater tool works on O3D?
Sent from my Optimus 2X using XDA App

Renegade_Rulez said:
If you hold volume down + power it will power on and off again
Click to expand...
Click to collapse
Try again: I run into that all the time, getting into recovery mode with the keys is tricky.
Renegade_Rulez said:
which kdz updater tool works on O3D?
Click to expand...
Click to collapse
I think there is only one...

I tried loads if times before it almost worked everytime after U got that firmware update screen I never succeeded will have to call LG tomorrow to get it replaced, no programs like kdz upd fw or uptestex were successful in flashing any kdz... the official LG tool works but after flashing only the firmware update screen.
Sent from my Optimus 2X using XDA App

Renegade_Rulez said:
I tried loads if times before it almost worked everytime after U got that firmware update screen I never succeeded will have to call LG tomorrow to get it replaced, no programs like kdz upd fw or uptestex were successful in flashing any kdz... the official LG tool works but after flashing only the firmware update screen.
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Yes, same here and i think for all that have this problem
Vol.down+Power etc... I tested ALL!! KDZ Updater, several times with LG Updater Tool etc... NO Chance!
Always the same and you cant get into adb shell...
So there is only one way: LG Repair Center
Or lets hope that a updater tool comes that works with our O3D...
Greez

[Q] lg g2 d801 bricked, no download mode,no fast boot only stuck at lg logo

hi
i think i bricked my lg g2 d801 t-mobile by first installing stock d802(i know i messed up) after that my phone went to fast boot mode.i used adb to load img files to bring back download mode and then i tried tot method to install stock rom which failed, i then tried pushing img files from adb to get atleast custom recovery but that further bricked my phone which is basically living in this situation:
-no download mode
-no fastboot
-stuck at lg logo when i try to power it on
-no recovery
also i tried using linux to load the img files but linux wont recognize my lg g2 when i type in the commands
PLEASE PLEASE PLEASE help me i am desparate

xtremepowered said:
hi
i think i bricked my lg g2 d801 t-mobile by first installing stock d802(i know i messed up) after that my phone went to fast boot mode.i used adb to load img files to bring back download mode and then i tried tot method to install stock rom which failed, i then tried pushing img files from adb to get atleast custom recovery but that further bricked my phone which is basically living in this situation:
-no download mode
-no fastboot
-stuck at lg logo when i try to power it on
-no recovery
also i tried using linux to load the img files but linux wont recognize my lg g2 when i type in the commands
PLEASE PLEASE PLEASE help me i am desparate
Click to expand...
Click to collapse
Have you tried this method?
http://forum.xda-developers.com/showthread.php?t=2701799
Not sure if it's applicable.

pitchdarkice said:
Have you tried this method?
http://forum.xda-developers.com/showthread.php?t=2701799
Not sure if it's applicable.
Click to expand...
Click to collapse
Thanks for your reply but I don't think that works, cause the link you have me is how to root device.

It still restores the image, you can choose to root or not
Sent from my SM-P600 using Tapatalk

xtremepowered said:
hi
i think i bricked my lg g2 d801 t-mobile by first installing stock d802(i know i messed up) after that my phone went to fast boot mode.i used adb to load img files to bring back download mode and then i tried tot method to install stock rom which failed, i then tried pushing img files from adb to get atleast custom recovery but that further bricked my phone which is basically living in this situation:
-no download mode
-no fastboot
-stuck at lg logo when i try to power it on
-no recovery
also i tried using linux to load the img files but linux wont recognize my lg g2 when i type in the commands
PLEASE PLEASE PLEASE help me i am desparate
Click to expand...
Click to collapse
Any luck fixing it ?

Kdz flashtool could solve the problem or using an usb.... U could leave the phone until the battery goes off and then recharge a little bit and try download mode again... the first method should work ... press the buttons correctly and connect the usb... working in 95%

same problem
tried the mentioned comments but still nothing for me.
PLEASE PLEASE let me know if you fix the problem OP

lgg2 d801 stuck on lg logo
Nabuco76 said:
Kdz flashtool could solve the problem or using an usb.... U could leave the phone until the battery goes off and then recharge a little bit and try download mode again... the first method should work ... press the buttons correctly and connect the usb... working in 95%
Click to expand...
Click to collapse
could you please explain what you did?
my lgg2 d801 simply boots into the LG logo screen and stays there til it dies.
I do not know too many technicalities when it comes to adb or ubuntu, in fact i dont even know if those programs go on the phone or the computer through usb..
simple clarifications would make the world of difference to me as my phone is useless now.
I can enter download mode using your "let phone die then try again method" but i dont know what to do from there..
Please help me restore my phone to the 4.4.2 kitkat i had previously
thannks in advance

d801 problems
I have a D801 that was rooted on 4.4.2, and I stupidly took the OTA update. I can still use my phone to make calls, but nothing associated with google works. The phone will not boot into download mode, there is no recovery and no fast boot. I have tried everything. It will no reroot or anything . Is there anything that I can do.

zorrozeek said:
I have a D801 that was rooted on 4.4.2, and I stupidly took the OTA update. I can still use my phone to make calls, but nothing associated with google works. The phone will not boot into download mode, there is no recovery and no fast boot. I have tried everything. It will no reroot or anything . Is there anything that I can do.
Click to expand...
Click to collapse
I'm not sure if this will work for the G2 but it worked for my G Pad just last night.
http://forum.xda-developers.com/showthread.php?t=2590185

spec4 said:
I'm not sure if this will work for the G2 but it worked for my G Pad just last night.
http://forum.xda-developers.com/showthread.php?t=2590185
Click to expand...
Click to collapse
Did you see where the directions say put the device in download mode. My device will not enter download mode.

zorrozeek said:
Did you see where the directions say put the device in download mode. My device will not enter download mode.
Click to expand...
Click to collapse
I can confirm that that method worked for my G2. Make sure you press and hold volume up then plug the phone in. Hold volume up till you see the small box saying its in download mode.
The nice thing about this method it doesn't wipe your data.
Make sure you have downloaded the most current drivers first though before you plug in your phone. Then go to options and update recovery.
Sent from my LG-V500

spec4 said:
I can confirm that that method worked for my G2. Make sure you press and hold volume up then plug the phone in. Hold volume up till you see the small box saying its in download mode.
The nice thing about this method it doesn't wipe your data.
Make sure you have downloaded the most current drivers first though before you plug in your phone. Then go to options and update recovery.
Sent from my LG-V500
Click to expand...
Click to collapse
It worked for you because your partitions were not messed up. I know the procedure for getting into download mode, I tell you that it no longer works. Volume up while plugging usb in now gets me a battery charging icon . When you have a rooted phone running 4.4.2 and apply OTA update, it screws the partitions up. I can still send and receive calls, just can't sign into google or use playstore .

zorrozeek said:
It worked for you because your partitions were not messed up. I know the procedure for getting into download mode, I tell you that it no longer works. Volume up while plugging usb in now gets me a battery charging icon . When you have a rooted phone running 4.4.2 and apply OTA update, it screws the partitions up. I can still send and receive calls, just can't sign into google or use playstore .
Click to expand...
Click to collapse
Interesting.
In the other post I found this
ratchet26 said:
I had a similar problem with my T-Mobile LG G2 where I was rooted and accepted an OTA. It broke root and I couldn't get IOroot or Stumproot to work. Went to flash a downgrade and found the phone wouldn't go into download mode. It was NOT bricked. I finally tried playing around with the LG Mobile Support Tool (B2CAppSetup.exe). Of course it detected that my phone already had the latest firmware from T-Mobile, but then I clicked Options>Upgrade Recovery.
It downloaded for a while then I noticed it had put my phone into download mode (it said "Rooted" in red letters at the bottom). Then it flashed the same firmware over and I immediately tested, it entered download mode right away. But I didn't end up needing that as Stumproot was able to brute force it now after the recovery flash.
Anyway, I couldn't find an answer anywhere else. Most results also have a bricked phone, but that wasn't my issue. This solved my problem and maybe it could work for others.
Click to expand...
Click to collapse
Seems like its possible to get into download mode. I don't know, maybe yours is just different.

spec4 said:
Interesting.
In the other post I found this
Seems like its possible to get into download mode. I don't know, maybe yours is just different.
Click to expand...
Click to collapse
mine is not different, just corrupted. Even took it to a craigslist repairman. He said that he did not have the expertise to repair it. It can't be put in recovery, download or fastboot mode. It also can't be rerooted.

ill ready repaired one equal but need it "octoplus box sw" for it

[GUIDE] How to recover from OnePlus soft bricked?

I decided to write a guide on how to recover from a bricked OnePlus One. This is my first guide.
About me: I am a newbie on Android.However, the XDA community has taught me a lot about my Android phone for the first month of using it. That's right! I have only been using Android for less than one month so take this guide with a grain of salt. But if you happen to soft brick your One, this is the guide to turn to. I have created two mind-bending/heartbreaking/frightening scenarios that I have experienced. Though, resolved thanks to this community.
Note: This will wipe your phone!
Scenario 1:
Soft bricked, (CM gear keeps spinning but won't boot to lock screen)
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
How to find out if you have unlocked bootloader:
1. Locate the folder where you installed the OPO Toolbox.
2. Hold Shift and right click on ANY white area within the folder.
3. Left click 'Open command window here'
4. Type:
fastboot oem device-info
If it returns True on tampered. Then you have unlocked your bootloader.
I hope this guide helps solve your soft-bricked problem. Good luck!

I suggest that a mod moves this to the General section

pandasa123 said:
I suggest that a mod moves this to the General section
Click to expand...
Click to collapse
Report the thread if you think its necessary.

Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:

Digital Arm said:
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Click to expand...
Click to collapse
You don't have an unlocked bootloader.
Transmitted via Bacon

timmaaa said:
You don't have an unlocked bootloader.
Transmitted via Bacon
Click to expand...
Click to collapse
Thx got it:cyclops:

Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
Hi i am stuck in scenario 2...I did all a u said but i cant flash CM XNPH22R ...where do i find this file...i cant find it on my phone either ..pls help ??

Thank god for this thread omg, saved my life

Locked Bootloader
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??

RiccoSuave said:
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
Click to expand...
Click to collapse
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.

Champi12301 said:
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Click to expand...
Click to collapse
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.

RiccoSuave said:
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
Click to expand...
Click to collapse
Then first you need to unlock the bootloader via fastboot,but that action erases all data. I assume,if you modified the boot via fastboot, USB DEBUGGING is working,so after try to do the softbrick tutorial of the thread.
Tecleado desde mi 1+1.

how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!

deanwinchester370 said:
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
Click to expand...
Click to collapse
Did you find a solution ?
I'm facing the exact same issue on my OPO.
>> bootloader locked
>> no recovery
>> impossible to unlock the bootloader
>> OPO stuck at 1+ logo and keep rebooting agin and again and again...
....i think my OPO is dead T_T
Is it a way to force the bootloader unlock ?
Please HELP !!!

Didn't work for me
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.

All done
davmeva said:
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
Click to expand...
Click to collapse
No one replied to this but never mind, took me two days but I now have a working phone. So you can call in the dogs, cheers

hi davmeva
did you fixed your oneplus one till now or not because i have also same situation here and no success till now .
i did by mistake all this stuff and now nothing work still same condition
if you got any solution please share it

[Q] im in dire need of help please!

Here is the rundown. I have the d 850 LG g3. Was planning on unrooting phone from towel root and rerooting it using towelroot once I found the mod I wanted. I have the latest version of twrp loaded as well. On my way home from work yesterday I was riding my motorcycle and listening to music, all the sudden the music stops so I pull over to see what happened and look to see that my phone has somehow opened twrp. I get home and try to reboot phone and it loads right back into twrp. I did a backup. Restarted phone to same results. I factory reset phone thinking that would work. NOPE. Straight back into twrp so I plug phone into computer to see what's on it. It appears all my games music LG backup etc is still there's why can't I get out of twrp. Could I have accidentally wiped everything while in my pocket? Can I fix this problem or do i now have a $500 paperweight? Please please folks out there in xda land help me out. I've got experience in rooting with my htc m7 so am familiar with this stuff. Any help would be greatly appreciated. Thanks for your time.

dcm1200 said:
Here is the rundown. I have the d 850 LG g3. Was planning on unrooting phone from towel root and rerooting it using towelroot once I found the mod I wanted. I have the latest version of twrp loaded as well. On my way home from work yesterday I was riding my motorcycle and listening to music, all the sudden the music stops so I pull over to see what happened and look to see that my phone has somehow opened twrp. I get home and try to reboot phone and it loads right back into twrp. I did a backup. Restarted phone to same results. I factory reset phone thinking that would work. NOPE. Straight back into twrp so I plug phone into computer to see what's on it. It appears all my games music LG backup etc is still there's why can't I get out of twrp. Could I have accidentally wiped everything while in my pocket? Can I fix this problem or do i now have a $500 paperweight? Please please folks out there in xda land help me out. I've got experience in rooting with my htc m7 so am familiar with this stuff. Any help would be greatly appreciated. Thanks for your time.
Click to expand...
Click to collapse
Make backup and try repair your system partition with lg flash tools and tot or if you have twrp. Try flash any rom stock bumped

Try this..
dcm1200 said:
Here is the rundown. I have the d 850 LG g3. Was planning on unrooting phone from towel root and rerooting it using towelroot once I found the mod I wanted. I have the latest version of twrp loaded as well. On my way home from work yesterday I was riding my motorcycle and listening to music, all the sudden the music stops so I pull over to see what happened and look to see that my phone has somehow opened twrp. I get home and try to reboot phone and it loads right back into twrp. I did a backup. Restarted phone to same results. I factory reset phone thinking that would work. NOPE. Straight back into twrp so I plug phone into computer to see what's on it. It appears all my games music LG backup etc is still there's why can't I get out of twrp. Could I have accidentally wiped everything while in my pocket? Can I fix this problem or do i now have a $500 paperweight? Please please folks out there in xda land help me out. I've got experience in rooting with my htc m7 so am familiar with this stuff. Any help would be greatly appreciated. Thanks for your time.
Click to expand...
Click to collapse
Somehow your rom partition/system seems to be corrupted. If you want to try and save your data, Please copy the downloaded version of your current rom and dirty flash (flash without wipe) and try to get back into the system. If you do not have your rom in your internal memory, try adb sideload or try to copy it to your external SD card and install from there.
You can also try to copy your stuff over to the external SD card using the file manager in TWRP and then wipe and install your rom.
If none of these wor, you still can flash factory image by process defined in the this thread: http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
I believe you can still rescue your phone. Please let us know how it went.

I tried flashing a ROM with gaps and rebooted and it still senT me back into TWRP.

Maybe his phone tried to download and install the OTA? Try this also if the above doesn't work. http://forum.xda-developers.com/lg-g3/development/fix-stuck-custom-recovery-trying-ota-t2907508

harihacker said:
Somehow your rom partition/system seems to be corrupted. If you want to try and save your data, Please copy the downloaded version of your current rom and dirty flash (flash without wipe) and try to get back into the system. If you do not have your rom in your internal memory, try adb sideload or try to copy it to your external SD card and install from there.
You can also try to copy your stuff over to the external SD card using the file manager in TWRP and then wipe and install your rom.
If none of these wor, you still can flash factory image by process defined in the this thread: http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
I believe you can still rescue your phone. Please let us know how it went.
Click to expand...
Click to collapse
Will do. Going home in a bit to try it out. Will keep u posted and thanks to everyone who has given advice. Ill be happy to get it back to stock and then starting over from scratch with a good custom from and kernel. Quick question, I tried flashing the custom illusion rom with gapps. Is that rom a bmp.img?

No.. A Zip file.
dcm1200 said:
Will do. Going home in a bit to try it out. Will keep u posted and thanks to everyone who has given advice. Ill be happy to get it back to stock and then starting over from scratch with a good custom from and kernel. Quick question, I tried flashing the custom illusion rom with gapps. Is that rom a bmp.img?
Click to expand...
Click to collapse
The rom is normally a zip file.
If you already tried to flash a rom (other than your current one) I suggest you try the "back to stock" thing that was referred in my last post. If you have all the drivers in place and do the process correctly (preferably from a Windows 7 laptop), Your phone will be burst back to life in no time.. Good luck..!!

harihacker said:
The rom is normally a zip file.
If you already tried to flash a rom (other than your current one) I suggest you try the "back to stock" thing that was referred in my last post. If you have all the drivers in place and do the process correctly (preferably from a Windows 7 laptop), Your phone will be burst back to life in no time.. Good luck..!!
Click to expand...
Click to collapse
Following the steps and just to part where I press volume up and plug into USB port and it said download for a second then jumped to firmware update do not unplug until process is complete. Its been a couple of minutes and in still at zero %

Good..
dcm1200 said:
Following the steps and just to part where I press volume up and plug into USB port and it said download for a second then jumped to firmware update do not unplug until process is complete. Its been a couple of minutes and in still at zero %
Click to expand...
Click to collapse
That is exactly what you want. You are now in download mode. So please proceed to next step (i believe the next step is on the laptop).

But the firmware update hasn't even gotten to 1% yet and I don't know how to get back to download mode. I don't know if unplugging device and trying again will mess it up even more. Device manager didn't pop up on computer either

dcm1200 said:
But the firmware update hasn't even gotten to 1% yet and I don't know how to get back to download mode. I don't know if unplugging device and trying again will mess it up even more. Device manager didn't pop up on computer either
Click to expand...
Click to collapse
Device manager wont "pop up".. you need to pull it from control pannel. Once you confirmed/changed the port to 41, i believe you can pull the usb, wait for 5 sec and put in back in. Follow exactly as instructed in the thread and you should be fine.
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
Also firmware update starts after the "usb pull" and re-plug in.

harihacker said:
Device manager wont "pop up".. you need to pull it from control pannel. Once you confirmed/changed the port to 41, i believe you can pull the usb, wait for 5 sec and put in back in. Follow exactly as instructed in the thread and you should be fine.
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
Also firmware update starts after the "usb pull" and re-plug in.
Click to expand...
Click to collapse
I haven't gotten a chance to pull it up. IT goes to download mode and then right into firmware update. I'm looking on control panel for my phone so I can go into port but its not showing up in control panel

dcm1200 said:
I haven't gotten a chance to pull it up. IT goes to download mode and then right into firmware update. I'm looking on control panel for my phone so I can go into port but its not showing up in control panel
Click to expand...
Click to collapse
1) The "firmware update" page is the download mode.
2) Control Panel -> Device Manager -> Ports -> Select LG one -> Port Settings -> Advanced -> look for "Com Port Number" on left hand side.
---------- Post added at 04:32 PM ---------- Previous post was at 04:29 PM ----------
If your device does not show in the Ports section, that means that your drivers are not installed correctly. Did you install the one given in the thread?
---------- Post added at 04:39 PM ---------- Previous post was at 04:32 PM ----------
Try these drivers if you cant find the right one: http://www.koushikdutta.com/post/universal-adb-driver

Yes drivers showed in port. Followed instructions according to LG flashtool and in getting a message saying that lgusb/ parallel lock key is not detected

?
dcm1200 said:
Yes drivers showed in port. Followed instructions according to LG flashtool and in getting a message saying that lgusb/ parallel lock key is not detected
Click to expand...
Click to collapse
At what stage of the process are you getting this error? Please refer to the step number in the "back to stock" thread.

Lg flash tool is saying authentication failed

Re-try.
dcm1200 said:
Lg flash tool is saying authentication failed
Click to expand...
Click to collapse
Again, at what stage did you get the error? Which step?
Did you install the driver i quoted above? If you did in between the process, please pull the battery and try from the beginning if the flash process did not start.

harihacker said:
At what stage of the process are you getting this error? Please refer to the step number in the "back to stock" thread.
Click to expand...
Click to collapse
Step 12 go to LG flash tool and run as administrator.

DLL
dcm1200 said:
Step 12 go to LG flash tool and run as administrator.
Click to expand...
Click to collapse
Did you replace the DLL file in the folder as instructed? Did you give the computer's correct admin password? Are you logged in as an admin in the laptop?

harihacker said:
Did you replace the DLL file in the folder as instructed? Did you give the computer's correct admin password? Are you logged in as an admin in the laptop?
Click to expand...
Click to collapse
I got in

[Guide] Unbrick T-mobile LG Leon

DO IT AT YOUR OWN RISK
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
LG Firmware: http://www.lg-phones.org/how-to-download-all-lg-phone-firmware.html
Fast alternative (for model LG-H345 ONLY): http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW9AW29132Q1ABFE1681VUH/H34510e_00.kdz
Unbricking Procedure
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY), and connect the phone to the computer via USB.
3. The Volume up button needs to be held until the devices gets into download mode.
4. Launch Flash Tool
5. Select Type: 3GQCT
6. PhoneMode: EMERGENCY
7. KDZ : locate your .KDZ firmware file
8. Click on Normal Flash
9. Click on Start
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two, but the tool will recognize it. The software starts the extraction and re-boots at %100. Don't touch anything, just wait for the device to reboot, then you can unplug the USB cable. Your device will boot normally, and user data will not be deleted.
Credits: dj rios and AP2FTW from Androidforuns.com

Thanks for sharing. Testing tonight. I got the update to 5.1.1 from T-mobile and I did not know that if you try to root after the update, it will soft brick your phone and the user WILL NOT be able to do the factory restore with the power and volume down trick. The phone wont respond. My phone is pretty much dead. If this works, you will be my favorite superhero. Thanks!
---------- Post added at 10:49 PM ---------- Previous post was at 10:23 PM ----------
I came back to say thank you again, you just saved my phone. Even my settings came back. You are the only person I was able to to find that had the right fix without running me around. I was not able to place the phone in download mode, but still followed your steps. The LG support too stopped at 24% and told me to remove the cable and the battery and place the battery back in. I placed the battery back and pushed the up volume almost at the same time that I inserted the USB cable on the phone. The phone went into download mode which I was not able to do before. Then the software continued to install the stock ROM. At the end, my phone rebooted and all my settings and apps were back how I left them before bricking the phone. Thanks forever.

It's Alive Again!
Thank you so much man. My LG devices have a history of dying due to flashing roms/recoveries but this is the first time a root messed up my phone. You saved me.
DO NOT ROOT THE LG LEON LTE IF YOU INSTALLED THE 5.1.1 UPDATE FROM T-MOBILE

help
my leon is stuck in boot loop how do fix in firmware update pls help i just get this phone and im a dumb ass
---------- Post added at 12:13 PM ---------- Previous post was at 11:54 AM ----------
triclone said:
Thanks for sharing. Testing tonight. I got the update to 5.1.1 from T-mobile and I did not know that if you try to root after the update, it will soft brick your phone and the user WILL NOT be able to do the factory restore with the power and volume down trick. The phone wont respond. My phone is pretty much dead. If this works, you will be my favorite superhero. Thanks!
---------- Post added at 10:49 PM ---------- Previous post was at 10:23 PM ----------
I came back to say thank you again, you just saved my phone. Even my settings came back. You are the only person I was able to to find that had the right fix without running me around. I was not able to place the phone in download mode, but still followed your steps. The LG support too stopped at 24% and told me to remove the cable and the battery and place the battery back in. I placed the battery back and pushed the up volume almost at the same time that I inserted the USB cable on the phone. The phone went into download mode which I was not able to do before. Then the software continued to install the stock ROM. At the end, my phone rebooted and all my settings and apps were back how I left them before bricking the phone. Thanks forever.
Click to expand...
Click to collapse
can you help me

Thanks! I followed the directions exactly and it worked perfectly
T-mobile had pushed an update to 5.1.1 and I reluctantly accepted. Then I tried to root using "LG One Click Root" application from XDA. It says it went through the rooting process successfully but when the phone restarts, it gets stuck at the LG boot screen. This fixes it!
So just FYI -- DO NOT ATTEMPT TO ROOT T-MOBILE LG LEON 5.1.1! IT WILL BRICK YOUR DEVICE.

Will this work for LG G2 VS980? verizon

I always get stuck
I have tried over and over and i always get stuck at 47% on the LG Mobile Support Tool and 49% on the phone. Help me please.

triclone said:
Thanks for sharing. Testing tonight. I got the update to 5.1.1 from T-mobile and I did not know that if you try to root after the update, it will soft brick your phone and the user WILL NOT be able to do the factory restore with the power and volume down trick. The phone wont respond. My phone is pretty much dead. If this works, you will be my favorite superhero. Thanks!
---------- Post added at 10:49 PM ---------- Previous post was at 10:23 PM ----------
I came back to say thank you again, you just saved my phone. Even my settings came back. You are the only person I was able to to find that had the right fix without running me around. I was not able to place the phone in download mode, but still followed your steps. The LG support too stopped at 24% and told me to remove the cable and the battery and place the battery back in. I placed the battery back and pushed the up volume almost at the same time that I inserted the USB cable on the phone. The phone went into download mode which I was not able to do before. Then the software continued to install the stock ROM. At the end, my phone rebooted and all my settings and apps were back how I left them before bricking the phone. Thanks forever.
Click to expand...
Click to collapse
Hi, sorry for the time. I have been super busy these days. Anyway, I am glad you succeeded in unbricking your device.

nexus14 said:
Thanks! I followed the directions exactly and it worked perfectly
T-mobile had pushed an update to 5.1.1 and I reluctantly accepted. Then I tried to root using "LG One Click Root" application from XDA. It says it went through the rooting process successfully but when the phone restarts, it gets stuck at the LG boot screen. This fixes it!
So just FYI -- DO NOT ATTEMPT TO ROOT T-MOBILE LG LEON 5.1.1! IT WILL BRICK YOUR DEVICE.
Click to expand...
Click to collapse
Hi, sorry for the time. I have been super busy these days. Anyway, I am glad you succeeded in unbricking your device.

majicgordon said:
Thank you so much man. My LG devices have a history of dying due to flashing roms/recoveries but this is the first time a root messed up my phone. You saved me.
DO NOT ROOT THE LG LEON LTE IF YOU INSTALLED THE 5.1.1 UPDATE FROM T-MOBILE
Click to expand...
Click to collapse
You're welcome!

lorddaniel2006 said:
I have tried over and over and i always get stuck at 47% on the LG Mobile Support Tool and 49% on the phone. Help me please.
Click to expand...
Click to collapse
Hi, sorry for the time. I have been super busy these days. Anyway, did you try this procedure yet? (I am just quoting someone else) "The LG support tool stopped at 24% and told me to remove the cable and the battery and place the battery back in. I placed the battery back and pushed the up volume almost at the same time that I inserted the USB cable on the phone. The phone went into download mode which I was not able to do before. Then the software continued to install the stock ROM."

I Did The Same Thing!
nexus14 said:
Thanks! I followed the directions exactly and it worked perfectly
T-mobile had pushed an update to 5.1.1 and I reluctantly accepted. Then I tried to root using "LG One Click Root" application from XDA. It says it went through the rooting process successfully but when the phone restarts, it gets stuck at the LG boot screen. This fixes it!
So just FYI -- DO NOT ATTEMPT TO ROOT T-MOBILE LG LEON 5.1.1! IT WILL BRICK YOUR DEVICE.
Click to expand...
Click to collapse
I also used "LG One Click Root" but on a Metro PCS LG Leon LTE and it went through the process and rebooted but got stuck on the logo.

I'm having a situation where the downgrade succeeds, but the phone still stays at LG logo and keeps booting.
If I connect the LG mobile support tool application, it states the phone is on 34510d firmware (eg, it does not downgrade, but remains in boot loop).
What I did was upgrade manually to T-mobile 5.1.1 and then wanted to downgrade to original stock rom.

Opens LG Mobile Support Tool, then "Connection To Server Failed" error. Stops there. No joy on this "fix"
Any suggestions why?

Will this unlock the phone as well ?

LG Leon H345 KDZ Stock Firmware Download brick fix works
LG Leon H345 KDZ Stock Firmware Download brick fix works
This works 100%! Please be aware that this is a more direct link to the KDZ Firmware! It will take you straight to the page that you need to be at without having to worry about your IMEI number at all! It has the KDZ Firmware image for all countrys and make and models of this phone!
lg-phone-firmware.com/index.php?id_mod=171
Also, be aware that there are more download options than what you see up top! I almost downloaded the wrong file for my phone this way! This is because it had the tmobile h345 leon right there uptop so I just clicked on it and started downloading it. However when you scroll down you'll see that there is a USA section that actually has several different versions for the same phone! Most notably the V10d, v10e, and the v10f! When making your selection look at the back of the phone behind the battery under neither the IMEI number and you'll see what version you have. Mine was the v10e, v10d is whats at the top under most downloaded so please make sure that you pay attention and don't make the same mistake that I almost made!
I also made another discovery. If you are unable to run the flash tool then that means that you need to download Visual C++ runtime Libary.
Another thing, when running the flash tool you may notice that it attempts to connect to a server and then has and error and says that it failed. It will happen as its flashing the phone and you see the bar moving percentage wise. However, do not be alarmed and do not close out of the app and try again! If you look at your phone you'll see that the car is still moving and that files are still being updated!
Also, even once it gets to a 100% it will still take a few minutes to complete so dont' worry about that!
---------- Post added at 11:59 PM ---------- Previous post was at 11:55 PM ----------
Srinivas.devineni said:
Will this unlock the phone as well ?
Click to expand...
Click to collapse
This will not unlock this phone! However you can use the new version of KingRoot and that will do it!
---------- Post added 12th December 2015 at 12:04 AM ---------- Previous post was 11th December 2015 at 11:59 PM ----------
TomJ2 said:
Opens LG Mobile Support Tool, then "Connection To Server Failed" error. Stops there. No joy on this "fix"
Any suggestions why?
Click to expand...
Click to collapse
Yes, actually I do. In my last post i stated that that does occur every time. However, you don't have to worry, just don't close the program and wait. If you look at your phone you notices that it will continue to update the even though it has that error, Once the phone is done updating and reboots. You'll see it updating the applications on the phone! An you'll be good to go!
So there IS JOY, in the FIX after all! Trust me, I just did it! :good:
---------- Post added at 12:15 AM ---------- Previous post was at 12:04 AM ----------
TomJ2 said:
Opens LG Mobile Support Tool, then "Connection To Server Failed" error. Stops there. No joy on this "fix"
Any suggestions why?
Click to expand...
Click to collapse
Yes it does say that. A screen pops up with an OK button and tell you that the connection to the server failed and asks you if you would like to cancel the update. Just ignore it and wait and watch you phone and you'll see it update.
Also, on doing another phone i've noticed that the Read Phone command when you first press the normal flash button can cause the application to crash for some reason. However, if you just sick that part and press START then you'll be able to proceed as normally and it will work just fine!:good:

i use twrp recovery in my lg leon but the problem is i cant boot back to my phone
hello guys, my problem is my phone can't boot up to my android device, its still booting in twrp, i use the method but it won't go to download mode, please i need help(

i cant entre to download and boot the phone mode when i try to downgrade from 10c to 10b help

Thanks, its work, tks God

Thank you very much for the instruction.