Related
when i factory reset the tab and installed a rom. it started normally. i did everything normally and it showed google account manager has stopped.
so i tried going into CWM recovery mode but got me into stock recovery so factory reset the tablet and then tried wipe cache participation but shows error. I think that the problem is the cache and the dalvich. but i cant use usb debugging so i cant delete the cache and the dalvich.
:crying::crying::crying::crying::crying:
so does any body know how to fix this
thanks in advance :laugh:
Help cache partication error
yolo squad dodo said:
when i factory reset the tab and installed a rom. it started normally. i did everything normally and it showed google account manager has stopped.
so i tried going into CWM recovery mode but got me into stock recovery so factory reset the tablet and then tried wipe cache participation but shows error. I think that the problem is the cache and the dalvich. but i cant use usb debugging so i cant delete the cache and the dalvich.
:crying::crying::crying::crying::crying:
so does any body know how to fix this
thanks in advance :laugh:
Click to expand...
Click to collapse
Can anyone help me please!!!!!!!
yolo squad dodo said:
so i tried going into CWM recovery mode but got me into stock recovery
Click to expand...
Click to collapse
You are not reading what you are typing.
Obvious answer: If you end up in the STOCK RECOVERY you simply do not have a custom recovery installed (Clockworkmod as you wrote). Get yourself a copy of a recent recovery from AndroidAndi's download repository (TWRP, Clockworkmod Swipe, PhilZ Touch), and flash the .tar.md5 of the recovery with ODIN in download mode.
Obvious question: How did you flash a ROM, other than some OTA Stock Samsung update on the device itself, in the first place when you don't have a custom recovery installed in order to do so?
EDIT: What exactly do you mean by "factory reset"? Did you re-flash your tablet with a Stock ROM? If that's the case, then any custom recovery you had installed was wiped and replaced with the stock recovery. Hence why you now don't have a custom recovery anymore.
BoneWithABeagle said:
You are not reading what you are typing.
Obvious answer: If you end up in the STOCK RECOVERY you simply do not have a custom recovery installed (Clockworkmod as you wrote). Get yourself a copy of a recent recovery from AndroidAndi's download repository (TWRP, Clockworkmod Swipe, PhilZ Touch), and flash the .tar.md5 of the recovery with ODIN in download mode.
Obvious question: How did you flash a ROM, other than some OTA Stock Samsung update on the device itself, in the first place when you don't have a custom recovery installed in order to do so?
EDIT: What exactly do you mean by "factory reset"? Did you re-flash your tablet with a Stock ROM? If that's the case, then any custom recovery you had installed was wiped and replaced with the stock recovery. Hence why you now don't have a custom recovery anymore.
Click to expand...
Click to collapse
Odin won't recognise my tablet in Odin mode neither does my computer is there another to install a CWM recovery. By the the I do have back up on the phone if that helps.
By the way I am a noob
yolo squad dodo said:
Odin won't recognise my tablet in Odin mode neither does my computer is there another to install a CWM recovery. By the the I do have back up on the phone if that helps.
By the way I am a noob
Click to expand...
Click to collapse
Just to recap on the steps you should have done...
1. You downloaded the .tar.md5 of the recovery you want to install, from Android Andi's filehost, on your PC
2. You installed the Samsung USB drivers on your computer
3. You installed ODIN on your computer
4. You unplugged the tablet from the charger and powered it off
5. You took your tablet and HELD VOL-UP while you powered it back on (to get into bootloader mode)
6. You plugged the tablet in to the computer and waited for a moment while Windows was installing the driver
--- Here the story ends, according to what you wrote as you say ODIN does not find the tablet.
Well, are you sure you did the steps so far in that order? Can't be that ODIN doesn't detect the tablet when it's operational (read: no a total dead brick) and it's in download mode.
The ONLY problem possible: You installed Samsung KIES, and not just the USB drivers, on your computer. KIES interferes with ODIN. You need to exit ODIN, bring up the Task Manager (press CTRL+ALT+DELETE and select "Task Manager"), find "kies" and end the running process(es) - ignore any warning message.
If that's too complicated: Uninstall KIES and then find the "Samsung Mobile USB drivers" installation package ... with a bit of searching (just to assign some homework to you) you will the links right here in this forum section more than just once.
Once KIES is terminated, or uninstalled and just the USB drivers installed, start ODIN again ... now it should detect the tablet.
Once ODIN confirms that the tablet is detected...
7. Select the .tar.md5 of the recovery as the "PDA"
8. Flash the recovery. Once complete the tablet rebooted into the newly installed recovery.
As for on-device flashing. That's possible...
- Your installed ROM must be ROOTED (no root, no fun)
- You need Chainfire's "MobileODIN" (the free version from the Play Store would suffice), and you need to let MobileODIN install the "p311x flashkernel package" (I think with the free version you need to download it manually from Chainfire's thread and install it manually) - jump into Chainfire's thread and read on
Once you have Mobile ODIN installed it is just a matter of:
- Download the .tar.md5 of the recovery on your tablet once more (or transfer it over from your PC)
- Start Mobile ODIN
- Select the .tar.md5 of the recovery (should automatically be set as a "PDA")
- Flash and reboot into the recovery
However, as a fair warning ... as with every flashing of your device ... keep in mind something could go wrong (just to straighten it out that there's always room for user mistakes or murphy's law getting into the way ("Everything that can go wrong will go wrong"))
BoneWithABeagle said:
Just to recap on the steps you should have done...
1. You downloaded the .tar.md5 of the recovery you want to install, from Android Andi's filehost, on your PC
2. You installed the Samsung USB drivers on your computer
3. You installed ODIN on your computer
4. You unplugged the tablet from the charger and powered it off
5. You took your tablet and HELD VOL-UP while you powered it back on (to get into bootloader mode)
6. You plugged the tablet in to the computer and waited for a moment while Windows was installing the driver
--- Here the story ends, according to what you wrote as you say ODIN does not find the tablet.
Well, are you sure you did the steps so far in that order? Can't be that ODIN doesn't detect the tablet when it's operational (read: no a total dead brick) and it's in download mode.
The ONLY problem possible: You installed Samsung KIES, and not just the USB drivers, on your computer. KIES interferes with ODIN. You need to exit ODIN, bring up the Task Manager (press CTRL+ALT+DELETE and select "Task Manager"), find "kies" and end the running process(es) - ignore any warning message.
If that's too complicated: Uninstall KIES and then find the "Samsung Mobile USB drivers" installation package ... with a bit of searching (just to assign some homework to you) you will the links right here in this forum section more than just once.
Once KIES is terminated, or uninstalled and just the USB drivers installed, start ODIN again ... now it should detect the tablet.
Once ODIN confirms that the tablet is detected...
7. Select the .tar.md5 of the recovery as the "PDA"
8. Flash the recovery. Once complete the tablet rebooted into the newly installed recovery.
As for on-device flashing. That's possible...
- Your installed ROM must be ROOTED (no root, no fun)
- You need Chainfire's "MobileODIN" (the free version from the Play Store would suffice), and you need to let MobileODIN install the "p311x flashkernel package" (I think with the free version you need to download it manually from Chainfire's thread and install it manually) - jump into Chainfire's thread and read on
Once you have Mobile ODIN installed it is just a matter of:
- Download the .tar.md5 of the recovery on your tablet once more (or transfer it over from your PC)
- Start Mobile ODIN
- Select the .tar.md5 of the recovery (should automatically be set as a "PDA")
- Flash and reboot into the recovery
However, as a fair warning ... as with every flashing of your device ... keep in mind something could go wrong (just to straighten it out that there's always room for user mistakes or murphy's law getting into the way ("Everything that can go wrong will go wrong"))
Click to expand...
Click to collapse
odin recognize tablet and it got flash or what ever its called. it restarted but it didn't go into recovery but just restart as normal
I got it working by installing custom rom.
Thanks a lot by the way for the tips
yolo squad dodo said:
odin recognize tablet and it got flash or what ever its called. it restarted but it didn't go into recovery but just restart as normal
Click to expand...
Click to collapse
For future reference: keeping VOL DOWN UP held while powering on/rebooting the tablet takes you into the recovery in case you borked the system and selecting "Reboot" -> "Recovery" from within the _custom_ ROM's power menu is not an option (the Stock Samsung ROM does not have that option by default). Though keep in mind that this only works when the tablet is _NOT_ connected to the charger/computer ... when the USB cable is plugged in it seems to ignore the hardware keys.
yolo squad dodo said:
I got it working by installing custom rom.
Thanks a lot by the way for the tips
Click to expand...
Click to collapse
Great you got your recovery and custom ROM installed. Have fun.
BoneWithABeagle said:
For future reference: keeping VOL DOWN held while powering on/rebooting the tablet takes you into the recovery in case you borked the system and selecting "Reboot" -> "Recovery" from within the _custom_ ROM's power menu is not an option (the Stock Samsung ROM does not have that option by default). Though keep in mind that this only works when the tablet is _NOT_ connected to the charger/computer ... when the USB cable is plugged in it seems to ignore the hardware keys.
Great you got your recovery and custom ROM installed. Have fun.
Click to expand...
Click to collapse
Umm isn't recovery power and volume UP? At least that's how it is on my 7'' tablet and the 10'' I rooted and installed a ROM on.
jrc2
Sent from my T-Mobile S2 using Tapatalk
jrc2 said:
Umm isn't recovery power and volume UP? At least that's how it is on my 7'' tablet and the 10'' I rooted and installed a ROM on.
Click to expand...
Click to collapse
Now that you mention it... yes, you're right jrc... "VOL DOWN" == Download Mode / "VOL UP" == Recovery (I failed to recall the "UP as in update.zip" association).
I wanted to update PB1 Lollipop to PF4-6.0 and unlock the boatloader. All that information is available on this forum in different posts, but requires some degree of back ground knowledge and is not always easy to follow for newbie’s like me. BY trial and error, and reading lot of thread postings, I was able to accomplish the goal. I am posting this guide as it may be helpful for other newbies.
BIG thank you to jrkruse, GeTex, muniz_ri, and other developers who put up lot of work. All credits go to them and I don’t claim any credit for anything.
My phone had Samsung eMMC and that is why I was able to unlock the bootloader. If your phone has Toshiba eMMC, you can’t unlock the bootloader and have to stop after rooting installing the PB1 ROM.
You can check eMMC by opening this file “/sys/block/mmcblk0/device/cid” in a root explorer app (e.g. root explorer). If the first two number start with 15, then you have Samsung eMMC. If first two numbers are 11, then you have Toshiba EMMC and your boot loader is unlockable at this time.
Another way to check eMMC is by installing eMMC Brickbug Check from the
HTML:
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
or from
HTML:
https://apkpure.com/emmc-brickbug-check/net.vinagre.android.emmc_check/download?from=details
and then running the app.
Install PB1 ROM and then root following instructions from here
http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
Before Doing Anything Please Install The Latest Samsung Drivers SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe
Installing PB1
You will lose all of your app data and apps installed, your internal storage will be fine, backup is recommended anyways
1. Download G900VVRU2BPB1_G900VVZW2BPB1_VZW.zip and unzip it
2. Reboot to recovery (Power+Volume Up+Home Button) and wipe data from recovery, reboot to bootloader
3. Plug In your phone and open Odin
3a. Make sure your phone is recognized (In the Odin Screen Under ID:COM the box under will be blue with your com port id #)
4. Click the AP button in the Odin Screen and locate and click on the G900VVRU2BPB1_G900VVZW2BPB1_G900VVRU2BPB1_HOME.tar .md5 this is the file that was unziped from the G900VVRU2BPB1_G900VVZW2BPB1_VZW.zip (Everything you do will be flashed via AP!!!!)
4a. This will take a few minutes for odin to load and verify MD5. When done in the odin message box it will say
5. Under options DO NOT CHANGE ANYTHING
6. Now click on Start
7. When finished you will get a green box that says PASS!
8. Phone will reboot automatically to recovery and finish updating then it will restart. It may be stuck on red Verizon screen for 10-15 minutes, so just be patient.
9. When Phone has finished loading and has booted up go through setup and do not add any google accounts or Samsung accounts or anything
OPEN DEVELOPER OPTION
Go to the settings menu on your GS5.
Scroll down to the "System section and tap "About Device."
Now scroll down to "Build number."
Tap the "Build number" section seven times. ...
Now back out to the main settings menu, and you'll see "Developer options" listed
Enable USB debugging
Uncheck “Verify apps via USB”
Go to Security
Check the box next to Unknown sources
Uncheck reactivation lock if it is checked (if you have a Samsung account click on reactivation lock enter your Samsung account and the tick should be off )
Go to Settings/Display and set your screen timeout to 5 min
Rooting Instructions
1. Download this zip GS5_LOLLIROOT_BLACKCAT.7z
2. Unzip folder.(You need a unzip application like 7z or Winrar).
ALSO COPY THIS FOLDER INTO SD CARD AND PUT IT IN THE PHONE
3. Open The Folder and click Bat file #1, “Install APKs” plug in your phone
On Allow USB debug message, check always allow this computer and click OK
Then follow directions
It will install APKs and then boot into bootloader “Downloading” and odin will open
Flash NK2_kernel.tar I AP slot
The phone will reboot get stuck on Samsung screen
Wait for the phone to reconnect
Press Enter flashing is complete to the root process can start
All the Steps for the main rooting process are done ON THE BAT FILES, READ THEM!!!!
If the root process hangs Close the bat, unplug phone pull battery and reboot phone to recovery (VolUp+Pwr+Home). In recovery wipe cache only and reboot. If phone reboots back to recovery instead, pull battery and manually reboot. Now Launch Bat #3 and then plug phone back in and
IF you get into android and cannot get root, Open bat file #2 and start from there again
If your phone wont reboot, use Bat #4 and try and enter download mode manually(VolDown+Pwr+Home)
When root is finished, pull your battery on your phone. Replace battery and reboot to download mode Power+Volume Down+Home
Use odin and Flash the VZW_BPB1_KERNEL_ONLY.tar.md5 Kernel through AP
IF STILL HAVING ISSUES RUNNING THE BAT FILES, REINSTALL PB1 THRU ODIN AND RESTART FROM SCRACTH
When phone reboots, go to the GS5_LOLLIROOT_BLACKCAT folder you placed on your phone
Open KRoot.apk and install it. Once installed open Kroot. Click The Up Arrows a couple of time until you get to Try It and click Try It and that's it. Don’t click nothing else just close Kingroot. You should now have root. If It says Root not available and the bat said your were rooted Reboot Phone and open KingRoot You should now be rooted (otherwise reboot phone and check again)
Now go to google play and install SuperSU-Me pro app (I purchased this app). Run it to remove kinguser and replace it with SuperSu. After this process open SuperSu and will ask to update binary click update normal
Copy this G900V_Fix Safestrap.zip (It may come in handy later on) to your SD Card and Internal Storage Copy Safestrap_Flashable_Kernels and Safestrap_Flashable_Firmware and anything else you want to install like the below rom
Now go to the folder on your SD card and open Busybox.apk Installer Allow SuperSu permission click on install.
After you get message about successful install, Click on Safstrap Allow SuperSu permission then click Install Safestrap after it installs, click open Safestrap and click on install/update recovery. After it is installed, click on “Reboot To Recovery”.
Make a backup of existing Rom In safestrap
Unlocking Boot Loader
Unlock the Galaxys S5 Bootloader using DEV Bootloader by Method 2
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Remove the phone’s SD card. Either back up all the files on the card to your computer or use another empty sd card as unlocker will wipe everything on the SD card during the process.
Copy Samsung_Bootloader_Unlocker.zip on to the card
Power off the phone and insert the sd card. Reboot the phone. Then Reboot into Safstrap by opening LP Safestrap Installer and clicking on “Reboot to Recovery”
Once into the Safestarp, install the Unlocker.
Reboot system when you get the Successful message
You will see a brief “Android is upgrading” screen
click on SamsungUnlocker app
Wait and make sure to grant SuperSu access. This may take a few seconds to come up
type yes in the terminal screen when it ask you (Yes/No) Hit enter on the keyboard
wait for phone to power off
reboot to bootloader (Power off phone, then press VolDwn+Pwr+Home and keep pressing till you see the bootloader, press then volume up) and verify it says MODE: Developer
While phone is still on the Bootloader" or "download mode, connect phone to computer thru USB and start Odin and flash Twrp recovery using Odin AP. Use TWRP 3.0.0. as newer versions have difficulty accessing the sd card. You can down load TWRP 3.0.0 for ODIN from https://dl.twrp.me/klte/twrp-3.0.0-0...e.img.tar.html
Reboot
Note: To re-use the sd card used for unlocking, format your SDcard in android OS, otherwise, use a Linux box and a card reader and use FDISK to wipe all the partitions, then it can be formatted correctly
Now copy following files on to the sdcard
-G900V_PF4_Stock_Deodexed_Debloated_Rooted_ROM.zip (For "Unlocked" Bootloaders Only!)
-TWRP_Prepare.zip
-PB1_Firmware_Only_NK2_Kernel.tar.md5
-S5_KLTE_USA_VZW.pit
-SafeStrap_PF4_Bootloader_Unlock_AIO.zip
MARSHMALLOW PF4-6.0.1 INSTALLATION
http://forum.xda-developers.com/ver...w-to-update-to-g900voe1-5-0-keeproot-t3149784
From the above thread, flash G900V_PF4_Stock_Deodexed_Debloated_Rooted_ROM.zip (For "Unlocked" Bootloaders Only!)
Reboot into TWRP by pressing the volUp+home+power button and release all the buttons as soon as you seen the initial few lines on top left of screen
Click Wipe then Click Advanced Wipe Then select System, Data, Cache. Then swipe to start wipe
Press Back button
Now flash the above ROM thru TWRP's Install button and then reboot
Phone will hang at the Verizon red screen
NOW FOLLOW INSTRUCTIONS FROM “If You Already Have Bootloader Unlocked And On A Samsung TW Rom” section of this thread
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Reboot into TWRP by pressing the volUp+home+power button and release all the buttons as soon as you seen the initial few lines on top of screen (If you reboot into android recovery, choose Reboot to bootloader and then reinstall TRWP thru Odin AP)
In TWRP Flash TWRP_Prepare.zip
Reboot system
It will reboot in to safstrap recovery (watch carefully as Safestrap Splash Screen is visible only for few seconds and then disappears – Choose recovery on the left side of the splash screen)
From safestrap, choose Reboot > Download
In Odin Under AP slot load PB1_Firmware_Only_NK2_Kernel.tar.md5
In Odin Under PIT load S5_KLTE_USA_VZW.pit
When finished on reboot watch for Safestrap Splash Screen and enter Safestrap (watch carefully as Safestrap Splash Screen is visible only for few seconds and then disappears)
Now go to Reboot Menu and click on Download Mode
Make sure in download mode the current binary is Samsung Official. If it says custom, repeat the above step till it shows Current Binary: Samsung official.
If Binary Status is Official Pull battery, restart and enter SafeStrap by choosing Recovery on the left side of the splash screen (DON’T press any buttons till you see safstrap screen and then enter)
Install: SafeStrap_PF4_Bootloader_Unlock_AIO.zip
Phone will Power Off.
Pull remove battery and then place it back
This process installs TWRP 3.2 which doesn't see the SD card. Hence, now we need to install TWRP 3.0.0
Reboot into TWRP by pressing the volUp+home+power button and release all the buttons as soon as you seen the initial few lines on top of screen. Click on Reboot and then Download button. When phone boots into Download mode, reflash TWRP 3.0.0 via ODIN AP
When phone reboots, It may be stuck on Verizon red screen for 10-15 minutes, just be patient.
That's it, you will now have on a rooted/unlocked PF4
2017-01-10: Edited the guide to make it simpler.
Sorry for not being able to answer questions in this thread as I have a very limited knowledge of this whole process.
Great job!
This works*.
I just finished the process of researching everything and installing most things based on the many different threads people vaguely pointed to.
It's nice to see someone compile it all together in one spot.
I previously had to reinstall the full PB1 restore image several times because I had gotten stuck along the way a few times.
The main thing I took from you that was different from other guides was that I installed PF4 from TWRP instead of FlashFire, maybe that helped things work.
*Some tips/modifications based on what I did based on other guides and now partially yours for the last few steps that worked just now:
1. The part where you install G900V_Fix Safestrap.zip and then Install PB1 ROM (VZW_BPB1_ODEX_DEODEX_V9.zip) is unnecessary.
So in other words, after Knox_Removal_SU_BB_INIT.D.zip, skip straight to unlocking Bootloader.
2. After unlocking the bootloader and reformatting the SD card, I'd suggest copying over all the remaining zip files you need for the rest of the tutorial to your device... that way you don't need to take out the microSD card and find a microSD reader.
3. I can't remember for sure, but I think after installing the PF4 ROM (I used G900V_PF4_Stock_Rooted_ROM.zip (For "Unlocked" Bootloaders Only!)), I had to reinstall TWRP 3.0.0 from ODIN.
4. Here's the link to TWRP 3.0.0 for ODIN https://dl.twrp.me/klte/twrp-3.0.0-0-klte-klte.img.tar.html
Those are all the suggestions I can remember. Great guide!
Royal2000H said:
Great job!
This works*.
I just finished the process of researching everything and installing most things based on the many different threads people vaguely pointed to.
It's nice to see someone compile it all together in one spot.
I previously had to reinstall the full PB1 restore image several times because I had gotten stuck along the way a few times.
The main thing I took from you that was different from other guides was that I installed PF4 from TWRP instead of FlashFire, maybe that helped things work.
*Some tips/modifications based on what I did based on other guides and now partially yours for the last few steps that worked just now:
1. The part where you install G900V_Fix Safestrap.zip and then Install PB1 ROM (VZW_BPB1_ODEX_DEODEX_V9.zip) is unnecessary.
So in other words, after Knox_Removal_SU_BB_INIT.D.zip, skip straight to unlocking Bootloader.
2. After unlocking the bootloader and reformatting the SD card, I'd suggest copying over all the remaining zip files you need for the rest of the tutorial to your device... that way you don't need to take out the microSD card and find a microSD reader.
3. I can't remember for sure, but I think after installing the PF4 ROM (I used G900V_PF4_Stock_Rooted_ROM.zip (For "Unlocked" Bootloaders Only!)), I had to reinstall TWRP 3.0.0 from ODIN.
4. Here's the link to TWRP 3.0.0 for ODIN https://dl.twrp.me/klte/twrp-3.0.0-0-klte-klte.img.tar.html
Those are all the suggestions I can remember. Great guide!
Click to expand...
Click to collapse
In retrospect, you are right that I did not need to install PB1 ROM (VZW_BPB1_ODEX_DEODEX_V9.zip). So removed that part. also made other changes as suggested.
Thank you!
mms2020 said:
In retrospect, you are right that I did not need to install PB1 ROM (VZW_BPB1_ODEX_DEODEX_V9.zip). So removed that part. also made other changes as suggested.
Thank you!
Click to expand...
Click to collapse
Great! Just a few more suggestions:
1. I think the part with "Once phone reboots, GO BACK TO PHONE AND CHANGE FOLLOWING SETTINGS " (basically the whole part about reenabling developer options and enabling USB debugging) is unnecessary and can be deleted because you deleted the part about installing that second ROM so all that should still be enabled.
2. I'd move the link to TWRP for ODIN from the bottom to right after the first time you mention TWRP (the line that starts with: While phone is still on the Bootloader" or "download mode, connect....)
3. What I meant in my previous reply was that I think flashing PF4 wiped TWRP, so in order to reboot to TWRP right after you install PF4, you need the user to reinstall TWRP from ODIN (right before/after this line: NOW FOLLOW INSTRUCTIONS FROM “If You Already Have...)
Royal2000H said:
Great! Just a few more suggestions:
1. I think the part with "Once phone reboots, GO BACK TO PHONE AND CHANGE FOLLOWING SETTINGS " (basically the whole part about reenabling developer options and enabling USB debugging) is unnecessary and can be deleted because you deleted the part about installing that second ROM so all that should still be enabled.
2. I'd move the link to TWRP for ODIN from the bottom to right after the first time you mention TWRP (the line that starts with: While phone is still on the Bootloader" or "download mode, connect....)
3. What I meant in my previous reply was that I think flashing PF4 wiped TWRP, so in order to reboot to TWRP right after you install PF4, you need the user to reinstall TWRP from ODIN (right before/after this line: NOW FOLLOW INSTRUCTIONS FROM “If You Already Have...)
Click to expand...
Click to collapse
Made those changes as well. If I remember correctly, I did not need to reflash TWRP after PF4 installation as it was flashed through the TWRP. Thanks
Great thread!
If I unlock the bootloader, do I still need to flash a new kernel from pb1 lollipop to a marshmallow kernel if I want to flash a marshmallow based rom on there? Particularly CM 13.
Nice!
If I want to flash cyanogen mod 13 do I do it after I flash the bootloader unlock & twrp, or do I have to flash SafeStrap_PB1_Bootloader_Unlock_AIO.zip first?
Thanks for this thread, OP.
I know a ton of work went into the methods explained in the threads used to create this newbie guide, but it can be difficult to follow those information dense threads for those of us who only get into rooting and flashing every couple of years with a new phone.
Sucks that Google and Verizon are making this more difficult. I fondly recall one click rooting!
They lock down the phones and load up the bloatware and if you aren't tech savvy enough to get around their locks (or just tech savvy enough to be able to follow an XDA how to thread), then you're almost forced into buying a 32gb phone so that you don't run out of memory when you start installing apps you actually want rather than the bloatware they prepackage.
I am blown away by how much bloatware has been removed from this debloated PF4.
Trying real hard
t-wrench said:
Thanks for this thread, OP.
I know a ton of work went into the methods explained in the threads used to create this newbie guide, but it can be difficult to follow those information dense threads for those of us who only get into rooting and flashing every couple of years with a new phone.
Sucks that Google and Verizon are making this more difficult. I fondly recall one click rooting!
They lock down the phones and load up the bloatware and if you aren't tech savvy enough to get around their locks (or just tech savvy enough to be able to follow an XDA how to thread), then you're almost forced into buying a 32gb phone so that you don't run out of memory when you start installing apps you actually want rather than the bloatware they prepackage.
I am blown away by how much bloatware has been removed from this debloated PF4.
Click to expand...
Click to collapse
Hi Guys, Well after much trying I have my phone rooted and the bootloader unlocked. Do I have to load the PF4 or can I continue to use it as it is. Or may I use a debloated PB1 rom? Thanks
Thumbmasher said:
Hi Guys, Well after much trying I have my phone rooted and the bootloader unlocked. Do I have to load the PF4 or can I continue to use it as it is. Or may I use a debloated PB1 rom? Thanks
Click to expand...
Click to collapse
You can use it as is.
But since you did all this work, might as well upgrade to Marshmallow.
t-wrench said:
You can use it as is.
But since you did all this work, might as well upgrade to Marshmallow.
Click to expand...
Click to collapse
I am afraid of loosing my work. It took all day. Can I flash 5.0 roms now? Like this one?
http://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-3-4-16-t3329029
Thumbmasher said:
I am afraid of loosing my work. It took all day. Can I flash 5.0 roms now? Like this one?
http://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-3-4-16-t3329029
Click to expand...
Click to collapse
I'm not sure on exactly what you can flash. I followed this newbie guide and it worked fine. Hopefully someone else can chime in.
As for loosing your work, if you followed the guide to unlocking the bootloader, you now have TWRP recovery. So make a backup, and store it on the microSD, or even safer yet, copy it from the microSD to another drive. If you screw things up, just use TWRP to restore the backup. Even if accidentally wipe the microSD, you'll still have that backup preserved off the phone.
Well, I had the (joy) of working on my mom's S5 VZW today. It was only running KK, so I got it rooted and bootloader unlocked OK,installed TWRP fine, but I tried flashing CM 14.1 (I had the 12/24 nightly downloaded before the servers all shutdown) and after 20 minutes it still wasn't getting past the CM logo. I'm used to these things taking a while, but 20 minutes is way too long. I'm currently downloading the PJ2 Stock Rooted Debloated rom to try from TWRP instead, since I can't download CM13 thanks to the whole CM/Lineage split.
For what it's worth, in the directions above, after flashing G900V_PF4_Stock_Deodexed_Debloated_Rooted_ROM.zip, I did have to reflash TWRP with Odin (someone else mentioned this, too). The directions at that step were unclear; did I need to let that boot all the way up, and if so, how long should I wait, since this is a Deodexed ROM I know it could take like 15 minutes, but it still wasn't booting after 20. So I just did a battery pull, reflashed TWRP, and proceeded to install the remaining zips as instructed.
While in TWRP, I can't make a backup to the external SD card; maybe it's mounted read-only? I can backup to the internal sdcard, which is OK if I ever get it booted up to any OS where I can use a file manager or transfer to PC.
Still, these directions were very helpful, hoping I can get this thing running in the next hour or so... I have to leave tomorrow!
Not sure if @mms2020 is still reading this, but in the SamsungUnlocker app, it seems that "Yes" is case sensitive. When I typed 'yes', the phone immediately powered off and subsequent reboot into bootloader does NOT show mode Developer and Odin flashing of TWRP 3.0.0 fails. I repeated and typed "Yes", then app generates a few more lines on screen, then phone powers down. Now bootloader shows mode Developer and Odin flashing of TWRP 3.0.0 succeeds.
Thanks for the guide it was actually quite straight forward to follow. I have a ok3 verizon s5 rooted w/ twrp installed and bootloader unlocked. Having never dealt with verizon or samsung phones before. What do I have to do to upgrade to a nougat CM14 rom? (i'm mainly concerned with connectivity issues). Since twrp is installed can I just install a cm14 image? (full wipe and all).
Thanks for the guide! :good:
I'm on lollipop, rooted, unlocked bootloader, I want to upgrade to marshmallow and keep twrp, so I don't need to install safestrap do I?
Sent from my SM-G928F using XDA-Developers Legacy app
I followed the steps a few days ago, it went perfectly. The root, the bootloader unlock, and the Marshmallow upgrade was all so easy! Nothing like my Note 4. I had to do all the work for that phone. This phone has it easy. It's all done for the users already. All I needed was a computer, with adb, common sense, and the ability to read lol. Anyways I'm on the Nemesis N7 international port and my phone is flying on this rom!! Couldn't be happier with my Now.... what....3 year old S5!
Sent from my SM-G903F using XDA-Developers Legacy app
Thanks for this. I wonder if this is normal, SuperSU-Me pro is stuck in processing for a long time. Is there a trick to it?
Thanks for any replies, Tom
thoughto said:
Thanks for this. I wonder if this is normal, SuperSU-Me pro is stuck in processing for a long time. Is there a trick to it?
Thanks for any replies, Tom
Click to expand...
Click to collapse
Try a different version
And no, it shouldn't take long at all. There is 2 steps though. And it will guide u through the steps. Or should anyway.
Sent from my SM-G903F using XDA-Developers Legacy app
Installing CWM Recovery + Rooting Samsung Galaxy J7 prime ( SM-G610F/SM-G610M )
Tested & WorkingKnow Issue
SDCARD & EXTSDCARD not mounting in CWM ( Not being able to flash/install ZIPs )
FixI suggest you to Install zip using sideload, here's a step by step guide :
First boot up your phone into CWM recovery
Go to Install zip update package and select Install zip from sideload
Now connect your android device to your computer
Download this and extract it.
Open command prompt in the ADB folder (mfastboot-v2 folder) by right clicking in the empty space of the folder while holding the Shift key.
Copy the Zip file you want to install on your device to the ADB folder, for example Xposed.zip.
Run the following command to sideload zip to your phone : adb sideload <filename.Zip>
Example adb sideload Xposed.zip
Voila! That's how you can flash Zip files
First Part: Installing CWM Recovery
NOTE BEFORE
Please make sure to follow the guide carefully and thoroughly as i won't be responsible for any damages caused to your device and also keep in mind that rooting your phone will automatically void your warranty.
MUST READ
Before you start, please note that this root has only been tested on the SM-G610F and SM-G610M variants of the Samsung Galaxy J7 prime, so kindly check your phone's variant before proceeding.(Check the back of your device)
Required Files:
CWM & ROOT
Samsung USB Driver
ADB USB Driver
How to install CWM Recovery
After downloading the required files make sure your system has an active Samsung USB Driver or you can simply download it from here
Also don't forget to Enable USB Debugging & Unlock OEM, this can be done by going to Developer Options and make sure to have these 2 boxes checked.
Then go to Lockscreen and Security under Settings and enable Unknown Sources.
With these done we are ready to kick-off!
Step by Step Instructions
STEP 1 : Connect your phone to your computer & Allow access to your device when the MTP Connection box pops up
STEP 2 : Now go to the ROOT J7 PRIME(2016) folder ( you will need to extract the rar file) you just downloaded and run 1-EnterDownloadMode.bat
STEP 3 : Wait for the phone to reboot into Download Mode ( If nothing happens after running 1-EnterDownloadMode.bat then you might need to disconnect and reconnect your USB cable and Allow USB Debugging (Check Always allow from this computer) when it prompts you. With this done, your device should automatically reboot into Downloading Mode.
STEP 4 : In Downloading Mode Run Odinv3.10.7.exe (Found in ROOT J7 PRIME(2016) folder) and click on AP and open
SM-G610_cwm.tar from ROOT J7 PRIME(2016) folder
After this go to Options in Odinv3.10.7.exe and uncheck both Auto Reboot & F Reset Time and finally click on start to execute the installation of CWM recovery. Wait for it to finish (When it says 'PASS!') and after that press and hold the Volume Down, Power and Home Button together ( To get out of download Mode ) and when you see the phone gets rebooted press and hold Volume Up, Power button and Home button to boot into CWM Recovery
STEP 5 : Enjoy! You now have CWM recovery installed
Second Part: Installing SuperSU
MUST READ
Use Volume buttons and power button in CWM Recovery to navigate through and select the different options.
How to Root
STEP 1 : In CWM Recovery, go to install zip package and then select install zip from sideload.
At this point you will have to connect your device to your computer and once done run ROOT.bat from ROOT J7 PRIME(2016) folder and wait for it to finish.
STEP 2 : Now run 3-Reboot.bat from ROOT J7 PRIME(2016) folder and you should see your phone get rebooted.
STEP 3 : Enjoy! You have just rooted your phone!
If you want to flash the stock recovery just repeat the steps for installing CWM but select SM-G610F_stock_recovery.tar or
SM-G610M_stock_recovery.tar instead of SM-G610_cwm.tar
P.S You now have a voided warranty
Cheers!
Just FYI before you catch flak from a mod, the work you are linking, the adfly shortened links are a no go on xda.
ShinySide said:
Just FYI before you catch flak from a mod, the work you are linking, the adfly shortened links are a no go on xda.
Click to expand...
Click to collapse
rlly?
Oh ok since it is against the rules i'll kindly remove them
Thanks for letting me know btw
Thanks a lot,but flashing supersu from cwm without running .bat wouldn't work?my pc is in repair i can only use the pc on my work office and i dont have admin privilege,cmd is disabled and i doubt .bat would work i only can install odin
fakih.m7md said:
Thanks a lot,but flashing supersu from cwm without running .bat wouldn't work?my pc is in repair i can only use the pc on my work office and i dont have admin privilege,cmd is disabled and i doubt .bat would work i only can install odin
Click to expand...
Click to collapse
It should work i guess but i recommend you to flash the ROOT.bat since it was tested and working 100%
HaxerProz said:
It should work i guess but i recommend you to flash the ROOT.bat since it was tested and working 100%
Click to expand...
Click to collapse
let it be the first test,i will flash supersu and if it fail i will try to run .bat,i already have a stock rom of j7 prime in case if anything went wrong
fakih.m7md said:
let it be the first test,i will flash supersu and if it fail i will try to run .bat,i already have a stock rom of j7 prime in case if anything went wrong
Click to expand...
Click to collapse
Ok but have you flashed CWM through Odin yet?
HaxerProz said:
Ok but have you flashed CWM through Odin yet?
Click to expand...
Click to collapse
no
fakih.m7md said:
no
Click to expand...
Click to collapse
You should do that first to be able to root..you know right?
absolutely i flashed a lot of custom recoveries before even in this mobile i have flashed twrp but root failed because of touch issue in twrp
fakih.m7md said:
absolutely i flashed a lot of custom recoveries before even in this mobile i have flashed twrp but root failed because of touch issue in twrp
Click to expand...
Click to collapse
You tried to flash twrp on J7 prime? The official TWRP isn't available as far as i know
HaxerProz said:
You tried to flash twrp on J7 prime?
Click to expand...
Click to collapse
yes i used mouse via otg to fix touch issue but adb sideload didn't work
fakih.m7md said:
yes i used mouse via otg to fix touch issue but adb sideload didn't work
Click to expand...
Click to collapse
k let me know how's it going btw
You tried this http://forum.xda-developers.com/galaxy-j7/how-to/guide-root-galaxy-j7-prime-twrp-t3503926 i guess..yea the touchscreen isnt responding we gotta wait for official twrp
HaxerProz said:
k let me know how's going btw
You tried this http://forum.xda-developers.com/galaxy-j7/how-to/guide-root-galaxy-j7-prime-twrp-t3503926 ?
Click to expand...
Click to collapse
yes and i visited this post more than 10000 times since 20 november to look for a solution to root j7 prime
fakih.m7md said:
yes and i visited this post more than 10000 since 20 november to look for a solution to root j7 prime
Click to expand...
Click to collapse
me too....till i finally came up with a solution after hours of testing
HaxerProz said:
me too....till i finally came up with a solution after hours of testing
Click to expand...
Click to collapse
thanks a lot,you're great
fakih.m7md said:
thanks a lot,you're great
Click to expand...
Click to collapse
You're welcome
I booted into recovery and installed CWM. It passed as well. However, when I boot into recovery, I still dont get CWM recovery. I have made sure I have set OEM UNLOCK properly. Please help!!
archer797 said:
I booted into recovery and installed CWM. It passed as well. However, when I boot into recovery, I still dont get CWM recovery. I have made sure I have set OEM UNLOCK properly. Please help!!
Click to expand...
Click to collapse
Just repeat all the steps from the beginning and see if it works..
Btw you are supposed to boot into Downloading mode and from there flash CWM Recovery using Odin..i don't know what you have missed.
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Peeran said:
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
Will this twrp works on j23g? I don't think so..
Yes,of course.
Is it working on all type of j2?
Samial said:
Is it working on all type of j2?
Click to expand...
Click to collapse
Nope
here`s the twrp for j23g
https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
and for root Just use magisk, it works on almost all smartphones and has much more features.
problems faced and solns found
1. During twrp flashing using odin, my stock recovery kept patching the twrp after reboots. So i couldn't install twrp succesfully. To fix this I unchecked "reboot" option in odin (thanks to another xda rooting guide)and switched off device manually after flashing. Then booted into recovery by pressing "home+vol up+power". this time stock rom was gone and twrp was there to welcome me.
2. i ended up in a bootloop after flashing the aforementioned superuser zip file. Instead i flashed BETA-SuperSU-v2.74-2-20160519174328.zip and fixed the bootloop.
Note- My device is Samsung Galaxy j200-G.
Here are some links to go through(as i did) ,if you face same problems:
1. https://twrp.me/samsung/samsunggalaxyj2.html
2. https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. https://www.androidinfotech.com/2016/07/root-samsung-galaxy-j2-sm-j200g-511.html
How I can unlock bootloader permanently??
SM-J200G
Will this work on SAMSUNG J200GU?
But unable to access twrp 2nd time it show custom recovery blocked by frp lock
abhi91ar said:
But unable to access twrp 2nd time it show custom recovery blocked by frp lock
Click to expand...
Click to collapse
Turn on Oem unlock in developer options.
§Ani§ said:
Turn on Oem unlock in developer options.
Click to expand...
Click to collapse
Already turned on but problem still exists. What to do now? Help me?
Ok i will try
I s there any best ROM with higher version for Samsung SM-J200H
Rooting samsung j200gu
abinashdash17 said:
1. During twrp flashing using odin, my stock recovery kept patching the twrp after reboots. So i couldn't install twrp succesfully. To fix this I unchecked "reboot" option in odin (thanks to another xda rooting guide)and switched off device manually after flashing. Then booted into recovery by pressing "home+vol up+power". this time stock rom was gone and twrp was there to welcome me.
2. i ended up in a bootloop after flashing the aforementioned superuser zip file. Instead i flashed BETA-SuperSU-v2.74-2-20160519174328.zip and fixed the bootloop.
Note- My device is Samsung Galaxy j200-G.
Here are some links to go through(as i did) ,if you face same problems:
1. https://twrp.me/samsung/samsunggalaxyj2.html
2. https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. https://www.androidinfotech.com/2016/07/root-samsung-galaxy-j2-sm-j200g-511.html
Click to expand...
Click to collapse
Wow thank you so much bro I now have rooted my phone!! (Samsung J200GU):good: :laugh:
Note: I flashed SR5-SuperSU-v2.78-SR5-20161130091551 instead of the 2.74 mentioned above?
abhi91ar said:
Already turned on but problem still exists. What to do now? Help me
Click to expand...
Click to collapse
Turn off auto reboot in odin and then flash.
Does this work on Sm-J200h? Trying to root my device but I am doing a little research before I do.
Peeran said:
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
whether after I take the steps above my data will be lost ?
Phones bricked now....
you dog my phones bricked should of mentioned to make a backup u fuk wit
Nice Tutorials
Hey i m ramcharan thanks nice guide how to root samsung J200G
EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.
S7 G930V Flat Odin Factory FIrmware Downloads
G930VVRS4CRI1_G930VVZW4CRI1_VZW_Verizon_USA_v8.0_Oreo.zip
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G930.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G930.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update V9 or higher bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Works perfect and love having TWRP just for everyone else DO NOT use the 1st link it will download the G935V firmware which will not flash for the S7 flat.
Brother, you might want to check your zips. Your sm_g930_oreo root/unroot zip is missing the BL_ENTER_ENG_RECOVERY_G93*.tar and instead has BL_ENG_BOOTLOADERS_G930?? Also, your S7_G930V Flat Odin Firmware links to the G935V firmware and will not flash obviously to the S7 flat. Kinda important files if you want to use this. I was going to try to unroot and update to the Oct security patch and thank God I checked the required files before starting.
Sorry, stupid question I can't find an answer to. How do I tell what bootloader I am on?
ktnemec said:
Sorry, stupid question I can't find an answer to. How do I tell what bootloader I am on?
Click to expand...
Click to collapse
5th to last number in your build
G930XXXX4XXXX
Archangel said:
Brother, you might want to check your zips. Your sm_g930_oreo root/unroot zip is missing the BL_ENTER_ENG_RECOVERY_G93*.tar and instead has BL_ENG_BOOTLOADERS_G930?? Also, your S7_G930V Flat Odin Firmware links to the G935V firmware and will not flash obviously to the S7 flat. Kinda important files if you want to use this. I was going to try to unroot and update to the Oct security patch and thank God I checked the required files before starting.
Click to expand...
Click to collapse
Use this one BL_ENG_BOOTLOADERS_G930.tar
Thanks brother worked perfect! Quick question,,,if I update to the Oct Patch I should be able to use the same root/unroot files correct?
jrkruse said:
Use this one BL_ENG_BOOTLOADERS_G930.tar
Click to expand...
Click to collapse
Archangel said:
Thanks brother worked perfect!
Click to expand...
Click to collapse
I fixed the files in the OP so you can redownload and name will be correct now
Sent using some kind of device I modified
Archangel said:
Thanks brother worked perfect! Quick question,,,if I update to the Oct Patch I should be able to use the same root/unroot files correct?
Click to expand...
Click to collapse
what does post 2 say. If you dont want to be stuck on stock then you are done with updates the firmware in the OP is it that the last firmware that can be rooted
Yeah I know and saw that the 5th character had the 8 so it is a secure bootloader. Trust me, I went back and forth about root and no root. I decided that what little bit I was rooting for wasnt worth the hit I took as far as speed, heat, and battery. So far I am enjoying stock with the Oct security patch. If I get root in the future I may try it but for now I can run my themes and life is good, thanks brother.
jrkruse said:
what does post 2 say. If you dont want to be stuck on stock then you are done with updates the firmware in the OP is it that the last firmware that can be rooted
Click to expand...
Click to collapse
If this works your a genius!! I'm going to try it first thing when I get home if no one complains of issues. I have all the stock crI1 Odin files I extracted from verizons recovery utility so no matter what I can fix it. So I cant wait to try this! I will donate if this works.
jrkruse said:
EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.
S7 G930V Flat Odin Factory FIrmware Downloads
G930VVRS4CRI1_G930VVZW4CRI1_VZW_Verizon_USA_v8.0_Oreo.zip
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G930.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G930.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Click to expand...
Click to collapse
Scottie32583 said:
If this works your a genius!! I'm going to try it first thing when I get home if no one complains of issues. I have all the stock crI1 Odin files I extracted from verizons recovery utility so no matter what I can fix it. So I cant wait to try this! I will donate if this works.
Click to expand...
Click to collapse
Don’t get your expectations up it still uses the engboot for root. I just made it easy to unroot so you can use stock boot. Img
Sent using some kind of device I modified
Oh okay. I will have to do some reading on Eng Boot. I'm not educated on what that exactly means. I did successfully use your root method and got to play in twrp which was really cool. I really like the adb tools setup. I'm having a hard time with the debloating. I'm trying to find out what files to remove and keep. The system is very slow rooted. I hope I'm not debloating wrong. Sorry I'm semi new at this.
Just be careful what you debloat. What I would do is go into settings/apps and disable anything you think is bloat then see if the phone runs differently for a day or so. Somethings you think wouldn't affect the running of the system do. That way if it does affect something you can go back in and enable it.
Scottie32583 said:
Oh okay. I will have to do some reading on Eng Boot. I'm not educated on what that exactly means. I did successfully use your root method and got to play in twrp which was really cool. I really like the adb tools setup. I'm having a hard time with the debloating. I'm trying to find out what files to remove and keep. The system is very slow rooted. I hope I'm not debloating wrong. Sorry I'm semi new at this.
Click to expand...
Click to collapse
I went ahead and used stock files in Odin to flash everything back to normal. I went ahead and tried the disable method with it unrooted of course. It is running so smooth now. On top of it all the Samsung apps work which I like.
I learned yesterday after all day battling the rooted way deleting bloat that you are correct. There are issues from deleting things that you think would never cause issues. My phone instantly would lock up and the battery was draining super fast. It was not worth it.
I will take your advice. Thank you!!
Archangel said:
Just be careful what you debloat. What I would do is go into settings/apps and disable anything you think is bloat then see if the phone runs differently for a day or so. Somethings you think wouldn't affect the running of the system do. That way if it does affect something you can go back in and enable it.
Click to expand...
Click to collapse
So what kinds of things would I be able to do with root that wouldn't get changed back once I unroot?
Archangel said:
Just be careful what you debloat. What I would do is go into settings/apps and disable anything you think is bloat then see if the phone runs differently for a day or so. Somethings you think wouldn't affect the running of the system do. That way if it does affect something you can go back in and enable it.
Click to expand...
Click to collapse
That is good advice. I used the 'pm uninstall' method to debloat tons of Samsung stuff. Now I occasionally get random battery drains. Time to factory reset. I should have just left it, because my wife has an international Exynos S7 with nothing debloated, and it runs perfect.
---------- Post added at 08:30 AM ---------- Previous post was at 08:23 AM ----------
Omegeddon said:
So what kinds of things would I be able to do with root that wouldn't get changed back once I unroot?
Click to expand...
Click to collapse
dual speaker mod and host file adblock are a couple of things.
Will this work on G930U model? (I assume so, but better to confirm...)
fessa said:
Will this work on G930U model? (I assume so, but better to confirm...)
Click to expand...
Click to collapse
As long as you are v4 bootloader
Sent using some kind of device I modified