Related
Srry title is supposed to say Help with HTC Touch Pro for sprint....it Woke up with a bad case of stupidity
So i wake up 2day and i find that my Sprint Htc Touch Pro's screen is like jumping around like crazy...the touch screen still works and all but it moves around non stop. i can still make out where lets say the all the button are so i can still find my way around the phone but its sooooo annoying. so i pressed the restart button on the botton hoping it would fix it and when is turns back on it just goes 2 a blue screen. so i pressed the button again and now a green screen which soon turns white. pressed again and not its a black screen with the logo Touch pro on the bottom and the red little numbers and letter on the top...(the Touch Pro logo is usually in the middle and the Numbers and letters on the bottom....) so it finally loads up and the screen is still messed up. so i went crazy, i got home from school and i saved all my contacts but coping the Pim file to my 1gb memory card and did the clear storage to once again hopefully fix everything. well it didnt but atleast i still hav my contacts. ha ha...(im laughing so that i dont cry) everything still work though, i can send txt, talk on the phone, and do everything else....but cant see anything cuz he screen is jumping around. and no im not an imbecile and messed up on the modding and messed the phone up...or else it would done this a looong time ago.... so any help will b soooooo helpful. oh and i took out the battery and put it back in the still doesnt fix anything. sometimes the screen stays blue and doesnt do anything...*tear falls on keyboard* lol
have you tried a hard reset?
i did...i went into clear storage and did the whole 1234 and then press yes. didnt do anything beside erase everything and then go back 2 crazy jumping screen....
Any fixes?
Black_Yoshi,
I was wondering if you found any solutions to your "screen jumpiness". I have got the same problem happening on my Touch Pro. Just started happening acouple days ago. Cant put a finger on what caused it, sprint will probably say water damage. I have the TEP except its my 3rd one in 12 months so they will cancel the program..
Any luck? Thanks
Flickering
YOur display is most likely going out. That started happening to my touch pro and with in three days the screen just went black so i took it the the sprint store and they change the screen display
So something really weird just happened.
I had my phone charging. When i pick it up, i notice that there's a portion of the screen thats stuck.
It shows the left and right soft keys from the home screen and some of the tf3d icons. At first i tought it was the phone lagging or stuck. But even after a soft reset, taking taking the battery out, and even hard resetting, my screen still showed the left and right soft keys and the icons. I can even see them in the splash screen.
Very bizarre. I contemplated flashing stock os and spl, and try to get a replacement. But about 20 minutes later, it slowly disappeared.
I wish i could have taken a picture just to show you.
Just wanted to share.
trancer_84 said:
So something really weird just happened.
I had my phone charging. When i pick it up, i notice that there's a portion of the screen thats stuck.
It shows the left and right soft keys from the home screen and some of the tf3d icons. At first i tought it was the phone lagging or stuck. But even after a soft reset, taking taking the battery out, and even hard resetting, my screen still showed the left and right soft keys and the icons. I can even see them in the splash screen.
Very bizarre. I contemplated flashing stock os and spl, and try to get a replacement. But about 20 minutes later, it slowly disappeared.
I wish i could have taken a picture just to show you.
Just wanted to share.
Click to expand...
Click to collapse
something similar happend to me.. it was after i was using you tube some of the pixels on my home screen where still red and white like where the youtube logo normaly is.. i tried a few thigns but lukly mine went back to normal after a soft reset.. but it hasnt happend again since.. hows ur battery life. cuz wow mine is not good.. im always carryin a car charger and charge it at home as much as possible bc i dont want to be stuck with out a phone when im out
Same here, it could be the software driver for the LCD screen. It doesn't refresh the pixels sometimes and we get this ghost image for a while...
so for the last few days ive been getting this weird problem, that when i press the call button to enter the dialer, instead of going to the dialer, if for example im on the program tab in tf3d, it will go to the settings tab, thus emulating a left click... it would be on or off this prob for a while, but now it seems every time i press the call button, it goes left. this is the same for the home button aswell goin left, also the end button and back button going right... up and down work fine, but im confused why this problem has arisen....
*as i was typing this, i jus tried again, and now i cant even go left or right, so the only buttons that are working are up, down and select...*
Any insight, maybe i need to remap them, maybe the hardware buttons are screwed... imma try a hard reset and let you know the results, any help is appreciated.
forgot to mention, im on NRGs latest phoenix rom....
I know normally that those buttons are pretty ridiculous. I mean trying to press left or right is pretty much like your praying that you get it since its almost 50/50 that youll hit the call or end buttons. I especially hate this when your in a program trying to go right and you end it by accident, but thats now im way off topic . Anyway, maybe it is possible that your buttons have become slightly misaligned, since thats all it would take for them to get screwed up. Although I have also experienced a similar problem to yours a while back, but it eventually ended. It COULD have something to do with the rom, but I find it highly unlikely, since theres tons of people using that rom. Do the buttons not register, or do they actually not click down? I was confused on this in your post.
djcaston said:
I know normally that those buttons are pretty ridiculous. I mean trying to press left or right is pretty much like your praying that you get it since its almost 50/50 that youll hit the call or end buttons. I especially hate this when your in a program trying to go right and you end it by accident, but thats now im way off topic . Anyway, maybe it is possible that your buttons have become slightly misaligned, since thats all it would take for them to get screwed up. Although I have also experienced a similar problem to yours a while back, but it eventually ended. It COULD have something to do with the rom, but I find it highly unlikely, since theres tons of people using that rom. Do the buttons not register, or do they actually not click down? I was confused on this in your post.
Click to expand...
Click to collapse
thanks for you reply they click down, but do not register correctly, for exmaple, if i was to press the call button, it will click, but register it as a left click...
after peforming a hard reset, and not installin anything else on the rom, i was glad to find it was all working again, prompting me to believe it was something i installed, but after 10 minutes, the erratic behaviour started again.... strange!!! dishearted, i went to sleep last night and when i awoke this morning, its all good in the hood! the buttons are fine! but for it 2 happen without installing anything, im guessing i might have had a bad flash or something...
manoli20 said:
thanks for you reply they click down, but do not register correctly, for exmaple, if i was to press the call button, it will click, but register it as a left click...
after peforming a hard reset, and not installin anything else on the rom, i was glad to find it was all working again, prompting me to believe it was something i installed, but after 10 minutes, the erratic behaviour started again.... strange!!! dishearted, i went to sleep last night and when i awoke this morning, its all good in the hood! the buttons are fine! but for it 2 happen without installing anything, im guessing i might have had a bad flash or something...
Click to expand...
Click to collapse
Possibly, but by the way your describing it, it sounds like very erratic behavior and may have something to do with the actual hardware. If it continues I would bring it in to your carrier and see if you can get it replaced or fixed.
I had this same problem. Had to get it replaced and the replacement works pretty much as well as when I first got my original FUZE. First replacement was complete crap (buttons were horrible, center button didn't click) but my second replacement is a bit better. You can see it wasn't put together as well as a new one though, the keyboard is a TINY bit to the left so you can see the backlight coming out from the right and the volume up button kind of sucks. Disappointed in these refurbs.
well its been behaving itself today... so touch wood it continues! i read somewhere that somebody was experiencing something similar and it just went away after a while...
we'll see!
my spacebar button always stuck. very hard to press....any solution?
Damn. My FUZE's DPAD is starting to act up again! My current FUZE is a refurbished replacement for my original which had this same issue. Putting the phone to sleep and turning it back on fixes the issue for a minute or so, and then it starts again. It can go a couple days without doing this and it starts again. I think this is how my first one started, only sometimes acting up but eventually it did it all the time.
Looks like it might be time to call for another replacement! I hope my 3rd replacement FUZE (first replacement's DPAD was DOA) will last until the Touch Pro 2. This capacitive surface was such a huge mistake for HTC. But instead of adding normal buttons or a trackball, they completely remove the DPAD from the Touch Pro 2 . At least there is no cheap capacitive surface that will break.
For me, both FUZEs started acting up after 4 months of having them. I am surprised barely anyone else is having this issue as I have had it twice now.
Hey ya all
Ive tried to google for this issue but haven't found anything. I got it yesterday evening, about 1-2 hours after OTA update to 2.3.4.
So what happens is when I hit the on/off button to turn of the screen, it sometimes goes black for about half a second and then turns back on. Same when I try to wake it, goes light and then goes dark. So it seams like a dubbleclick almost.
Sometimes I've also got the issue that my Home button just keeps making screen shots, took me a while to figure out thats conected to the power button. How am I supposed to take a screenshot? Could it be a simple hardware issue where the button gets stuck? I've tried to remove the backcover and clean up, but it all seams fine for my untrained eye.
How are you holding the phone when this happens? This same thing happens to me sometimes if I kind of wrap my hand around it when I pick it up. I unconsciously hit the volume button like half a second before I hit the power button, and the volume button wakes the phone & then the power button turns it right back off.
It can happen whatever way Im holding it im afraid, and it has only occured since last night. Lets see if someone else got this after 2.3.4 or if its just a wierd coincidence.
And also, as I said, it seam to bug out my screenshot function.
That's not a coincidence, happens to me as well.
My guess is that's because of the new screenshot feature (hold Power+Home). Can anyone hazard a guess as to how to turn it off?
Well, guess it's a good thing it aint then, hopefully it'll get fixed.
No one else with this issue? It anoyys me alot
I have this issue, but it only happens if I press the button too fast or something. I don't know how to explain.
happens to me too
Randomly enough, just tried the screenshot function and it said saved to Camera folder but it's not there. What app is used to take it? Someone said it was MySketcher but I don't know
I spoke to HTC support sweden today and they didnt seam to be aware of this issue atleast. Keeps happening to me about 30% of the times i hit the button.. I dont think its hardware issue but didnt care to factory reset the phone yet.. Anyone of you with the issue has other than stock rom? Did it only happen after you upgraded to latest firmware? Ive only had it since 2.3.4.
I'm getting this exact same issue since upgrading to 2.3.4. I have a stock ROM too. It's really annoying, press the on/off button and it doesnt always turn it off, it does exactly the same as what the op says.
Also getting it take screen shots when I press the home button.
isak888 said:
Hey ya all
Ive tried to google for this issue but haven't found anything. I got it yesterday evening, about 1-2 hours after OTA update to 2.3.4.
So what happens is when I hit the on/off button to turn of the screen, it sometimes goes black for about half a second and then turns back on. Same when I try to wake it, goes light and then goes dark. So it seams like a dubbleclick almost.
Sometimes I've also got the issue that my Home button just keeps making screen shots, took me a while to figure out thats conected to the power button. How am I supposed to take a screenshot? Could it be a simple hardware issue where the button gets stuck? I've tried to remove the backcover and clean up, but it all seams fine for my untrained eye.
Click to expand...
Click to collapse
well for same issue i got my power button changed...now its fine... i had this issue and was mad... so after change its gud... itz mostly coz of overstressed power button...c ur power button is fine... in recovery also it must b mis-behaving?
Edit : i am on 2.3.4 stock as of now
lalitsehgal21 said:
well for same issue i got my power button changed...now its fine... i had this issue and was mad... so after change its gud... itz mostly coz of overstressed power button...c ur power button is fine... in recovery also it must b mis-behaving?
Edit : i am on 2.3.4 stock as of now
Click to expand...
Click to collapse
Was abit tricky to understand you, well anyway, so you had it repaired then? Id love to avoid that, hate being without the phone. But maybe thats the only solution.
Thanks for your input.
Yea I'm not so sure if this is a software thing. I haven't experienced this during regular use, but I have experienced a double-press effect while in Clockwork Mod. If I press the button on the leftmost part and do it slowly, I can get a double click without actually clicking it twice. Scares the crap out of me when I'm flashing roms and kernels.
So maybe something is up with the power button itself? Too sensitive maybe?
same issue here, was afraid it was my button. first i thought it was crt animations that were causting it. i have to go in to build.prop and turn off power+home screen shots because half the time i hit home it take a screenshot. not sure what's up with the power button.
have the issue on both bulletproof and eaglesblood, both 2.3.4
Happens to me as well and drives me absolutely insane.. The problem is definitely hardware.. I got a replacement back cover under warranty and after two weeks the problem is back just as bad.
To somewhat remedy the screen off/on flicker, i use 'screen off and lock' for long press of search button.. Not the same I know, but at least it doesn't flicker back on.
As for recovery, you can use home/menu for up/down, back for back and search for select.. I find this light years easier than having to ninja push the power button to avoid a double press.
I wish there was some way to fix the damn button tho.. I don't understand how HTC screwed it up so bad.
Sent from my HTC Sensation Z710e using XDA App
Having the same problem. Is the problem with the back cover or the phone itself? I looked at the button underneath the case and it looks bent. I was thinking maybe a tiny piece of paper inside would help, if it does, I'll report back
EDIT: playing with the button with the case off shows no problem. It has to be the way the case interacts with the button
EDIT 2: A piece of paper doesn't completely relieve the problem but does make it much harder to reproduce, and in my opinion, it's much nicer to press now
EDIT 3: Thicker paper=issue solved. I'll send HTC an email about it not reaching the button all the way, maybe they can do a recall on affected backings
Flippy125 said:
Having the same problem. Is the problem with the back cover or the phone itself? I looked at the button underneath the case and it looks bent. I was thinking maybe a tiny piece of paper inside would help, if it does, I'll report back
EDIT: playing with the button with the case off shows no problem. It has to be the way the case interacts with the button
EDIT 2: A piece of paper doesn't completely relieve the problem but does make it much harder to reproduce, and in my opinion, it's much nicer to press now
EDIT 3: Thicker paper=issue solved. I'll send HTC an email about it not reaching the button all the way, maybe they can do a recall on affected backings
Click to expand...
Click to collapse
I dont understand exactly what you did, but id be glad to know!
isak888 said:
I dont understand exactly what you did, but id be glad to know!
Click to expand...
Click to collapse
I ripped off a little piece of paper from a paper cd case about the width of the button inside, I then folded it until I found the perfect thickness and set it on top. I just carefully put the backing back on. It pushes the power button up about double what it was. I'd take pics but all it is is a piece of paper sitting on top XD
Sent from my HTC Sensation 4G using XDA Premium App
Got an email back from HTC saying they'll use the information for "future devices"
Sent from my HTC Sensation 4G using XDA Premium App
Just bought Z5 dual in green.
Still brand new, 1 hour old.
A moment ago, power button got a bit sticky and would not pop back up.
Therefore could not turn screen on.
It has gone away since, only happened once.
But I am fairly sure that after this episode, power button started to make a tacky clicking sound every time I press the button.
QUESTION
does your z5 make this sound, and it's just that I failed to notice it from the beginning? Is this normal?
Was the power button getting stuck once a fluke, and won't happen again? Or could it be manufacturing defect?
Bit of a hassle to go back to the shop for exchange, and wanted to know if this sound is normal amongst other users or not.
Thanks for your replies in advance!
Any comment or opinion is greatly appreciated!
My power button clicks every time I use it which isn't often since I have tap to wake and the fingerprint sensor set up. Never got stuck though.
augie7107 said:
My power button clicks every time I use it which isn't often since I have tap to wake and the fingerprint sensor set up. Never got stuck though.
Click to expand...
Click to collapse
Thanks for the reply!
Just wanted to check, that my button clicks in sensation when pressed, as well as making the clicking sound at the same time.
Hard to describe, but I would say it sounds similar to a pc mouse clicking sound.
If I was blindfolded and someone wss clicking my power button, I could have thought that someone was using a pc mouse
Yours sounds like this too?
Yeah, it clicks at a slightly higher pitch to the volume key click.
jewelkobayashi said:
Just bought Z5 dual in green.
Still brand new, 1 hour old.
A moment ago, power button got a bit sticky and would not pop back up.
Therefore could not turn screen on.
It has gone away since, only happened once.
But I am fairly sure that after this episode, power button started to make a tacky clicking sound every time I press the button.
QUESTION
does your z5 make this sound, and it's just that I failed to notice it from the beginning? Is this normal?
Was the power button getting stuck once a fluke, and won't happen again? Or could it be manufacturing defect?
Bit of a hassle to go back to the shop for exchange, and wanted to know if this sound is normal amongst other users or not.
Thanks for your replies in advance!
Click to expand...
Click to collapse
mine is failed as well! I will post my experiences with SONY UK.
jewelkobayashi said:
Thanks for the reply!
Just wanted to check, that my button clicks in sensation when pressed, as well as making the clicking sound at the same time.
Hard to describe, but I would say it sounds similar to a pc mouse clicking sound.
If I was blindfolded and someone wss clicking my power button, I could have thought that someone was using a pc mouse
Yours sounds like this too?
Click to expand...
Click to collapse
Yes, mine sounds exactly like that.
Got the same issue, it's like the power button is sliding down, and you have to push it up to make it clickable again.
Thanks for your input guys.
I went back to sony centre where I got it from, and checked other Z5's
Since they all made similar clicking sounds, I decided to wait and see how it goes.
If I get the sticky power button again, I will return it.
Other than that, it is running beautifully!
It runs cooler than my Z3 too!
I got this thing too and i dont know if take it back to support... I started to noticed it up when i disabled fingertip sensor to unlock it just to check some stuff.
So maybe its my paranoia lol
dfavefenix said:
I got this thing too and i dont know if take it back to support... I started to noticed it up when i disabled fingertip sensor to unlock it just to check some stuff.
So maybe its my paranoia lol
Click to expand...
Click to collapse
Are you talking about the power button not coming back up? Our the stake clicking sound?
Update in my situation
Since the initial problem, it had not happened or repeated again, so I can say that it has worn in nicely.
jewelkobayashi said:
Are you talking about the power button not coming back up? Our the stake clicking sound?
Update in my situation
Since the initial problem, it had not happened or repeated again, so I can say that it has worn in nicely.
Click to expand...
Click to collapse
In the clicking sound
The Power button is clicky. It is not a fault!
The clicking sound is normal but even mine got stuck once, had to press it a few times to get it to come back up. Yours certainly wasn't an isolated incident.
I have been in a shop checking a new one and the button doesnt need to press so much like mine one. The girl has said me that if i send it to support they wont do anything to the phone because it does work well. Its just a little diference touch...
I will send it to support in december that i wil get a phone from a friend so i can use it while the checking thing
I have a gold Z5 (I know!)
They power button slipped downwards under the casing as I used it. EE were actually really helpful for once and replaced it as I'd only had it 4 weeks. Unfortunately the replacement phone has the same issue. It doesn't affect the function of the button at all, I just worry that it will slide down too far into the body and not come up again.
I don't think EE will replace it again as the guy was very nice and tried a few different ways to log the problem until it was accepted for replacement. It seems to be a problem for a few people, but as long as it keeps working I'm not too fussed! Just thought I'd mention it so anyone else with the same issue doesn't feel alone ?
I am having the same problem, Z5 gold rev2, got the phone on 5th february, wich is now 11 days old, power button gets stuck sometimes, thanks God I have double tap to wake, wich makes things less painful, but I am afraid that this could get worse by the time. Otherwise this phone is such a beatuy! works very well, but this with power button ruins good experience that I have with this device.
spaha-bih said:
I am having the same problem, Z5 gold rev2, got the phone on 5th february, wich is now 11 days old, power button gets stuck sometimes, thanks God I have double tap to wake, wich makes things less painful, but I am afraid that this could get worse by the time. Otherwise this phone is such a beatuy! works very well, but this with power button ruins good experience that I have with this device.
Click to expand...
Click to collapse
I am the OP.
My phone has not become worse. Everything the same, and is working all ok.
From my experience, pushing down on the button AND sliding the power button down towards the bottom of the phone at the same time makes it get stuck in that position. So as long as you avoid the sliding down bit, I never encountered a repeat of the problem.
If it does happen, and I have yet to hear of a power button on z5 that got permanently stuck, all you do is slide it up while depressing the power button.
Everything is still water resisting and perfect.
To add, I've been using it naked, and it is surprisingly scratch-free!